Add XIAO-ESP32-S3 Board Support (WIP)

looking to cleanup certain things with config to allow easier customization of the build when used with the flipper zero

esp32_marauder/BatteryInterface.cpp

@@ -5,7 +5,7 @@ BatteryInterface::BatteryInterface() {
 }
 
 void BatteryInterface::main(uint32_t currentTime) {
-  #ifndef MARAUDER_FLIPPER
+  #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
     if (currentTime != 0) {
       if (currentTime - initTime >= 3000) {
         //Serial.println("Checking Battery Level");
@@ -22,14 +22,14 @@ void BatteryInterface::main(uint32_t currentTime) {
 }
 
 void BatteryInterface::RunSetup() {
-  #ifndef MARAUDER_FLIPPER
+  #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
     Wire.begin(I2C_SDA, I2C_SCL);
     this->initTime = millis();
   #endif
 }
 
 int8_t BatteryInterface::getBatteryLevel() {
-  #ifndef MARAUDER_FLIPPER
+  #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
     Wire.beginTransmission(IP5306_ADDR);
     Wire.write(0x78);
     if (Wire.endTransmission(false) == 0 &&

esp32_marauder/BatteryInterface.h

@@ -5,7 +5,7 @@
 
 #include "configs.h"
 
-#ifndef MARAUDER_FLIPPER
+#ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
   #include <Wire.h>
 #endif
 

esp32_marauder/TemperatureInterface.cpp

@@ -19,7 +19,7 @@ void TemperatureInterface::RunSetup() {
 }
 
 uint8_t TemperatureInterface::getCurrentTemp() {
-  #ifndef MARAUDER_FLIPPER
+  #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
     return ((temprature_sens_read() - 32) / 1.8);
   #endif
     return 0;

esp32_marauder/configs.h

@@ -17,6 +17,7 @@
   #define MARAUDER_FLIPPER
   //#define ESP32_LDDB
   //#define MARAUDER_DEV_BOARD_PRO
+  //#define XIAO_ESP32_S3
 
   #define MARAUDER_VERSION "v0.10.7"
 
@@ -478,6 +479,13 @@
   #ifdef MARAUDER_DEV_BOARD_PRO
     #define SD_CS 4
   #endif
+
+  #ifdef XIAO_ESP32_S3
+    #define SD_CS 3
+    // Override RX1+TX1 pins
+    #define XIAO_RX1 1
+    #define XIAO_TX1 2
+  #endif
   //// END SD DEFINITIONS
 
   //// SCREEN STUFF
@@ -513,6 +521,10 @@
     #define HAS_BT
   #endif
 
+  #ifdef XIAO_ESP32_S3
+    #define HAS_BT
+  #endif
+
   #ifndef HAS_SCREEN
     #define TFT_WHITE 0
     #define TFT_CYAN 0

esp32_marauder/esp32_marauder.ino

@@ -35,6 +35,7 @@ https://www.online-utility.org/image/convert/to/XBM
 #include "CommandLine.h"
 #include "lang_var.h"
 #include "flipperLED.h"
+#include "xiaoLED.h"
 
 #ifdef HAS_SCREEN
   #include "Display.h"
@@ -74,6 +75,7 @@ EspInterface esp_obj;
 Settings settings_obj;
 CommandLine cli_obj;
 flipperLED flipper_led;
+xiaoLED xiao_led;
 
 #ifdef HAS_SCREEN
   Display display_obj;
@@ -214,6 +216,10 @@ void setup()
     flipper_led.RunSetup();
   #endif
 
+  #ifdef XIAO_ESP32_S3
+    xiao_led.runSetup();
+  #endif
+
   //Serial.println("This is a test Channel: " + (String)settings_obj.loadSetting<uint8_t>("Channel"));
   //if (settings_obj.loadSetting<bool>( "Force PMKID"))
   //  Serial.println("This is a test Force PMKID: true");
@@ -253,7 +259,7 @@ void setup()
   #endif
 
   // Temperature stuff
-  #ifndef MARAUDER_FLIPPER
+  #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
     temp_obj.RunSetup();
   #endif
 
@@ -261,7 +267,7 @@ void setup()
     display_obj.tft.println(F(text_table0[6]));
   #endif
 
-  #ifndef MARAUDER_FLIPPER
+  #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
     battery_obj.battery_level = battery_obj.getBatteryLevel();
   
 //    if (battery_obj.i2c_supported) {
@@ -272,7 +278,7 @@ void setup()
   #endif
 
   // Do some LED stuff
-  #ifndef MARAUDER_FLIPPER
+  #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
     led_obj.RunSetup();
   #endif
 
@@ -335,7 +341,7 @@ void loop()
       sd_obj.main();
     #endif
 
-    #ifndef MARAUDER_FLIPPER
+    #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
       battery_obj.main(currentTime);
       temp_obj.main(currentTime);
     #endif
@@ -347,7 +353,7 @@ void loop()
       #endif
       //cli_obj.main(currentTime);
     }
-    #ifndef MARAUDER_FLIPPER
+    #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
       led_obj.main(currentTime);
     #endif
     if (wifi_scan_obj.currentScanMode == OTA_UPDATE)
@@ -370,7 +376,7 @@ void loop()
       display_obj.main(wifi_scan_obj.currentScanMode);
       menu_function_obj.main(currentTime);
     #endif
-    #ifndef MARAUDER_FLIPPER
+    #ifndef MARAUDER_FLIPPER || XIAO_ESP32_S3
       led_obj.main(currentTime);
     #endif
     //cli_obj.main(currentTime);

esp32_marauder/xiaoLED.cpp

@@ -0,0 +1,47 @@
+#include "xiaoLED.h"
+
+void xiaoLED::RunSetup() {
+    pinMode(XIAO_LED_PIN, OUTPUT);
+
+if (!settings_obj.loadSetting<bool>("EnableLED")) {
+    digitalWrite(XIAO_LED_PIN, HIGH);
+    return;
+}
+
+delay(50);
+
+  digitalWrite(XIAO_LED_PIN, LOW);
+  delay(500);
+  digitalWrite(XIAO_LED_PIN, HIGH);
+  digitalWrite(XIAO_LED_PIN, LOW);
+  delay(500);
+  digitalWrite(XIAO_LED_PIN, HIGH);
+  digitalWrite(XIAO_LED_PIN, LOW);
+  delay(500);
+  digitalWrite(XIAO_LED_PIN, HIGH);
+}
+
+void xiaoLED::attackLED() {
+  if (!settings_obj.loadSetting<bool>("EnableLED"))
+    return;
+    
+  digitalWrite(XIAO_LED_PIN, HIGH);
+  delay(10);
+  digitalWrite(XIAO_LED_PIN, LOW);
+}
+
+void xiaoLED::sniffLED() {
+  if (!settings_obj.loadSetting<bool>("EnableLED"))
+    return;
+    
+  digitalWrite(XIAO_LED_PIN, HIGH);
+  delay(10);
+  digitalWrite(XIAO_LED_PIN, LOW);
+}
+
+void xiaoLED::offLED() {
+  if (!settings_obj.loadSetting<bool>("EnableLED"))
+    return;
+    
+  digitalWrite(XIAO_LED_PIN, HIGH);
+}

esp32_marauder/xiaoLED.h

@@ -0,0 +1,24 @@
+#ifndef xiaoLED_H
+#define xiaoLED_H
+
+#include "configs.h"
+#include "settings.h"
+
+#include <Arduino.h>
+
+#ifdef XIAO_ESP32_S3
+    #define XIAO_LED_PIN 21
+#endif
+
+extern Settings settings_obj;
+
+class xiaoLED {
+
+    public:
+        void RunSetup();
+        void attackLED();
+        void sniffLED();
+        void offLED();
+};
+
+#endif  /* xiaoLED_H */