gitea-mirror/esp8266_deauther
1
0
Fork 0
mirror of https://github.com/SpacehuhnTech/esp8266_deauther.git synced 2025-12-23 07:29:20 -08:00
Code Issues Packages Projects Releases Wiki Activity

Reorganized configs

Browse Source
This commit is contained in:
Stefan Kremser
2018-03-25 16:06:35 +02:00
parent 4a387df645
commit df3769615e
13 changed files with 116 additions and 115 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
configs/deauther_boy.txt → configs/DSTIKE_Deauther_OLED_v1-v1.5/A_config.h
View File

@@ -15,9 +15,9 @@
Uncomment the type of LED you're using
Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
//#define DIGITAL_LED
#define DIGITAL_LED
//#define RGB_LED
#define NEOPIXEL_LED
//#define NEOPIXEL_LED
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Adjust following settings for your type of LED
@@ -30,9 +30,9 @@
// === Settings for Digital LED and RGB LED === //
#define LED_CATHODE false // common ground (GND)
#define LED_PIN_R 2 // ESP-12 LED
#define LED_PIN_R 16 // NodeMCU on-board LED
#define LED_PIN_G 0
#define LED_PIN_B 16 // NodeMCU on-board LED
#define LED_PIN_B 2 // ESP-12 LED
// === Settings for RGB LED and Neopixel LED === //
#define LED_MODE_BRIGHTNESS 10 // brightness of LED modes
@@ -40,7 +40,7 @@
// === Settings for Neopixel LED === //
#define LED_NEOPIXEL_NUM 1
#define LED_NEOPIXEL_PIN 15
#define LED_NEOPIXEL_PIN 9
// if it doesn't work try changing NEO_GRB to NEO_GRBW
#define LED_NEOPIXEL Adafruit_NeoPixel(LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800)
@@ -51,12 +51,13 @@
Adjust the pins to match your setup
Comment out the buttons you don't use.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
#define BUTTON_UP 10
#define BUTTON_DOWN 9
#define BUTTON_LEFT 0
#define BUTTON_RIGHT 13
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14
#define BUTTON_B 12
//#define BUTTON_LEFT 12
//#define BUTTON_RIGHT 13
//#define BUTTON_B 10
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Uncomment the type of display you're using
@@ -65,8 +66,8 @@
0x3c = I2C address
SDA = GPIO 5 (D1)
SCL/SCK = GPIO 4 (D2) */
//#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 5, 4); // for 1.3" OLED
#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
//#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 5, 4); // for 1.3" OLED
/* RST = GPIO 5 (D1)
DC = GPIO 4 (D2)

18
configs/DSTIKE_Deauther_OLED_v1-v1.5/README.md Normal file
View File

@@ -0,0 +1,18 @@
# DSTIKE Deauther OLED v1 - v1.5
| | |
| - | - |
| LED Type | Digital |
| LED R | GPIO 2 |
| LED G | disabled |
| LED B | GPIO 16 |
| Display and buttons enabled | YES |
| Display Driver | SSD1306 |
| Display SDA | GPIO 5 (D1) |
| Display SCL | GPIO 4 (D2) |
| Button Up |GPIO 12 |
| Button Down | GPIO 13 |
| Button Left | disabled |
| Button Right | disabled |
| Button A | GPIO 14 |
| Button B |disabled |

0
configs/deauther_board_oled.txt → configs/DSTIKE_Deauther_OLED_v2-v3/A_config.h
View File

18
configs/DSTIKE_Deauther_OLED_v2-v3/README.md Normal file
View File

@@ -0,0 +1,18 @@
# DSTIKE Deauther OLED v2 - v3
| | |
| - | - |
| LED Type | Digital |
| LED R | GPIO 2 |
| LED G | disabled |
| LED B | GPIO 16 |
| Display and buttons enabled | YES |
| Display Driver | SH1106 |
| Display SDA | GPIO 5 (D1) |
| Display SCL | GPIO 4 (D2) |
| Button Up |GPIO 12 |
| Button Down | GPIO 13 |
| Button Left | disabled |
| Button Right | disabled |
| Button A | GPIO 14 |
| Button B |disabled |

0
configs/deauther_board_oled_RGB.txt → configs/DSTIKE_Deauther_OLED_v3.5/A_config.h
View File

17
configs/DSTIKE_Deauther_OLED_v3.5/README.md Normal file
View File

@@ -0,0 +1,17 @@
# DSTIKE Deauther OLED v3.5
| | |
| - | - |
| LED Type | Neopixel (WS2812) |
| LED Pin | GPIO 15 |
| Number of LEDs | 1 |
| Display and buttons enabled | YES |
| Display Driver | SH1106 |
| Display SDA | GPIO 5 (D1) |
| Display SCL | GPIO 4 (D2) |
| Button Up |GPIO 12 |
| Button Down | GPIO 13 |
| Button Left | disabled |
| Button Right | disabled |
| Button A | GPIO 14 |
| Button B |disabled |

0
configs/deauther_board_RGB.txt → configs/DSTIKE_Deauther_v3_&_DSTIKE_NodeMCU-07_v2/A_config.h
View File

17
configs/DSTIKE_Deauther_v3_&_DSTIKE_NodeMCU-07_v2/README.md Normal file
View File

@@ -0,0 +1,17 @@
# DSTIKE Deauther v3 & DSTIKE NodeMCU-07 v2
| | |
| - | - |
| LED Type | Neopixel (WS2812b) |
| LED Pin | GPIO 15 |
| Number of LEDs | 1 |
| Display and buttons enabled | NO |
| Display Driver | SH1106 |
| Display SDA | GPIO 5 (D1) |
| Display SCL | GPIO 4 (D2) |
| Button Up |GPIO 12 |
| Button Down | GPIO 13 |
| Button Left | disabled |
| Button Right | disabled |
| Button A | GPIO 14 |
| Button B |disabled |

6
configs/default.txt → configs/Default/A_config.h
View File

@@ -51,9 +51,9 @@
Adjust the pins to match your setup
Comment out the buttons you don't use.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
#define BUTTON_UP 14
#define BUTTON_DOWN 12
#define BUTTON_A 13
#define BUTTON_UP 14 // D5
#define BUTTON_DOWN 12 // D6
#define BUTTON_A 13 // D7
//#define BUTTON_LEFT 12
//#define BUTTON_RIGHT 13

20
configs/Default/README.md Normal file
View File

@@ -0,0 +1,20 @@
# Default Config
Default configuration for all boards without using a display or RGB LED.
The display can be enabled over the settings.
| | |
| - | - |
| LED Type | Digital |
| LED R | GPIO 2 |
| LED G | disabled |
| LED B | GPIO 16 |
| Display and buttons enabled | NO |
| Display Driver | SSD1306 |
| Display SDA | GPIO 5 (D1) |
| Display SCL | GPIO 4 (D2) |
| Button Up |GPIO 14 (D5) |
| Button Down | GPIO 12 (D6) |
| Button Left | disabled |
| Button Right | disabled |
| Button A | GPIO 13 (D7) |
| Button B |disabled |

8
configs/README.md
View File

@@ -1,10 +1,4 @@
Here you find a bunch of modified config files for different boards.
Those are meant to be copy and replaced in the A_config.h file in the Arduino sektch.
Those are meant to be copy and replaced in the Arduino sektch.
The default config should be fine for all boards that don't have a display or a RGB LED (like the NodeMCU).
- [Default config](https://github.com/spacehuhn/esp8266_deauther/blob/master/configs/default.txt)
- [DSTIKE NodeMCU-07 v2 & Deauther v3 (without OLED)](https://github.com/spacehuhn/esp8266_deauther/blob/master/configs/deauther_board_RGB.txt)
- [DSTIKE Deauther OLED v1 - v3](https://github.com/spacehuhn/esp8266_deauther/blob/master/configs/deauther_board_oled.txt)
- [DSTIKE Deauther OLED v3.5 (or newer) & WiFi Deauther Monster](https://github.com/spacehuhn/esp8266_deauther/blob/master/configs/deauther_board_oled_RGB.txt)
- [DSTIKE Deauther Boy](https://github.com/spacehuhn/esp8266_deauther/blob/master/configs/deauther_boy.txt)

81
configs/diy_esp_boy.txt
View File

@@ -1,81 +0,0 @@
#ifndef config_h
#define config_h
// ===== DISPLAY LIBRARY ===== //
#include <Wire.h>
#include <SPI.h>
#include "SH1106Wire.h"
#include "SSD1306Wire.h"
#include "SH1106Spi.h"
#include "SSD1306Spi.h"
// =========================== //
// ===================== LED CONFIG ==================== //
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Uncomment the type of LED you're using
Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
//#define DIGITAL_LED
#define RGB_LED
//#define NEOPIXEL_LED
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Adjust following settings for your type of LED
you can ignore the rest of the #define's
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
// === Settings for Digital LED === //
#define LED_ENABLE_R true
#define LED_ENABLE_G false
#define LED_ENABLE_B true
// === Settings for Digital LED and RGB LED === //
#define LED_CATHODE false // common ground (GND)
#define LED_PIN_R 13 // D7
#define LED_PIN_G 15 // D8
#define LED_PIN_B 16 // D0
// === Settings for RGB LED and Neopixel LED === //
#define LED_MODE_BRIGHTNESS 1 // brightness of LED modes
#define LED_DYNAMIC_BRIGHTNESS false // brightness in scan mode depending on packet rate and deauths per second
// === Settings for Neopixel LED === //
#define LED_NEOPIXEL_NUM 1
#define LED_NEOPIXEL_PIN 9
// if it doesn't work try changing NEO_GRB to NEO_GRBW
#define LED_NEOPIXEL Adafruit_NeoPixel(LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800)
// ===================== DISPLAY CONFIG ==================== //
#define USE_DISPLAY true // will force display on
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Adjust the pins to match your setup
Comment out the buttons you don't use.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
#define BUTTON_UP 2
#define BUTTON_DOWN 14
#define BUTTON_A 10
#define BUTTON_LEFT 12
#define BUTTON_RIGHT 0
#define BUTTON_B 9
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Uncomment the type of display you're using
Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
0x3c = I2C address
SDA = GPIO 5 (D1)
SCL/SCK = GPIO 4 (D2) */
//#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 5, 4); // for 1.3" OLED
/* RST = GPIO 5 (D1)
DC = GPIO 4 (D2)
CS = GPIO 15 (D8) or GND
SCK/SCL = GPIO 14 (D5)
SDA/MOSI = GPIO 13 (D7) */
//#define DISPLAY SSD1306Spi display = SSD1306Spi display = SSD1306Spi(5, 4, 15); // for 0.96" OLED with SPI
//#define DISPLAY SH1106Spi display = SH1106Spi(5, 4); // for 1.3" OLED with SPI
// ========================================================= //
#endif

17
esp8266_deauther/A_config.h
View File

@@ -30,9 +30,9 @@
// === Settings for Digital LED and RGB LED === //
#define LED_CATHODE false // common ground (GND)
#define LED_PIN_R 2 // ESP-12 LED
#define LED_PIN_R 16 // NodeMCU on-board LED
#define LED_PIN_G 0
#define LED_PIN_B 16 // NodeMCU on-board LED
#define LED_PIN_B 2 // ESP-12 LED
// === Settings for RGB LED and Neopixel LED === //
#define LED_MODE_BRIGHTNESS 10 // brightness of LED modes
@@ -45,15 +45,15 @@
#define LED_NEOPIXEL Adafruit_NeoPixel(LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800)
// ===================== DISPLAY CONFIG ==================== //
#define USE_DISPLAY false // will force display on
#define USE_DISPLAY true // will force display on
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Adjust the pins to match your setup
Comment out the buttons you don't use.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
#define BUTTON_UP 14
#define BUTTON_DOWN 12
#define BUTTON_A 13
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14
//#define BUTTON_LEFT 12
//#define BUTTON_RIGHT 13
@@ -63,9 +63,7 @@
Uncomment the type of display you're using
Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
0x3c = I2C address
SDA = GPIO 5 (D1)
SCL/SCK = GPIO 4 (D2) */
*/
#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
//#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 5, 4); // for 1.3" OLED
@@ -79,4 +77,3 @@
// ========================================================= //
#endif