From f70c644a9d1d2f3276aaccdb01d130c2d0cc85dc Mon Sep 17 00:00:00 2001
From: Stefan Kremser <stef.1497@gmail.com>
Date: Tue, 3 Apr 2018 17:44:26 +0200
Subject: [PATCH] Reverting A_config changes

Sorry I accidentally commited my changes that were for a board I'm testing. Here are the default values again :)
---
 esp8266_deauther/A_config.h | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/esp8266_deauther/A_config.h b/esp8266_deauther/A_config.h
index 506bf94..0dce091 100644
--- a/esp8266_deauther/A_config.h
+++ b/esp8266_deauther/A_config.h
@@ -15,9 +15,9 @@
     Uncomment the type of LED  you're using
     Only one of them can be defined at a time!
    = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
-//#define DIGITAL_LED
+#define DIGITAL_LED
 //#define RGB_LED
-#define NEOPIXEL_LED
+//#define NEOPIXEL_LED
 
 /* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
     Adjust following settings for your type of LED
@@ -39,8 +39,8 @@
 #define LED_DYNAMIC_BRIGHTNESS false // brightness in scan mode depending on packet rate and deauths per second
 
 // === Settings for Neopixel LED === //
-#define LED_NEOPIXEL_NUM 12
-#define LED_NEOPIXEL_PIN 14
+#define LED_NEOPIXEL_NUM 1
+#define LED_NEOPIXEL_PIN 9
 // if it doesn't work try changing NEO_GRB to NEO_GRBW 
 #define LED_NEOPIXEL Adafruit_NeoPixel(LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800)
 
@@ -51,9 +51,9 @@
     Adjust the pins to match your setup
     Comment out the buttons you don't use.
    = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
-//#define BUTTON_UP 12
-//#define BUTTON_DOWN 13
-//#define BUTTON_A 14
+#define BUTTON_UP 12
+#define BUTTON_DOWN 13
+#define BUTTON_A 14
 
 //#define BUTTON_LEFT 12
 //#define BUTTON_RIGHT 13
@@ -64,8 +64,8 @@
     Only one of them can be defined at a time!
    = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
 */
-//#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
-#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 13, 12); // for 1.3" OLED
+#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
+//#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 5, 4); // for 1.3" OLED
 
 /*  RST = GPIO 5 (D1)
     DC = GPIO 4 (D2)
@@ -78,4 +78,5 @@
 //#define FLIP_DIPLAY // uncomment that to flip the display vertically
 // ========================================================= //
 
-#endif
+#endif
+