Revert config

Improved serial outputs

.github/workflows/build_push.yml

@@ -2,6 +2,8 @@ name: Build and Push
 
 on:
   workflow_dispatch:
+  pull_request:
+    types: [opened, reopened]
 
 jobs:
   # This workflow contains a single job called "build"
@@ -96,20 +98,24 @@ jobs:
         with:
           sketch-names: MarauderOTA.ino
           arduino-board-fqbn: esp32:esp32:esp32s2
-          platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.3/package_esp32_dev_index.json
           
       - name: Replace SD lib
         run: |
-          rm -rf /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.0-rc1/libraries/SD
-          cp -R /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.4arduino-esp32/libraries/SD /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.0-rc1/libraries/SD
-          ls -la /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.0-rc1/libraries/SD
+          rm -rf /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.3/libraries/SD
+          cp -R /home/runner/work/ESP32Marauder/ESP32Marauder/2.0.4arduino-esp32/libraries/SD /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.3/libraries/SD
+          ls -la /home/runner/.arduino15/packages/esp32/hardware/esp32/2.0.3/libraries/SD
           
       - name: Modify platform.txt
         run: |
           echo "Chicken"
           for i in $(find /home/runner/.arduino15/packages/esp32/hardware/esp32/ -name "platform.txt"); do
+            sed -i 's/compiler.c.elf.libs.esp32c3=/compiler.c.elf.libs.esp32c3=-zmuldefs /' "$i"
+            sed -i 's/compiler.c.elf.libs.esp32s3=/compiler.c.elf.libs.esp32s3=-zmuldefs /' "$i"
             sed -i 's/compiler.c.elf.libs.esp32s2=/compiler.c.elf.libs.esp32s2=-zmuldefs /' "$i"
             sed -i 's/compiler.c.elf.libs.esp32=/compiler.c.elf.libs.esp32=-zmuldefs /' "$i"
+            cat "$i" | grep compiler.c.elf.libs.esp32c3
+            cat "$i" | grep compiler.c.elf.libs.esp32s3
             cat "$i" | grep compiler.c.elf.libs.esp32s2
             cat "$i" | grep compiler.c.elf.libs.esp32
           done
@@ -118,15 +124,45 @@ jobs:
         uses: ArminJo/arduino-test-compile@v3.2.0
         with:
           sketch-names: esp32_marauder.ino
-          arduino-board-fqbn: esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=16M,PSRAM=enabled
-          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
+          arduino-board-fqbn: esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled
           extra-arduino-cli-args: "--warnings none"
-          #extra-arduino-lib-install-args: "-zmuldefs"
           
       - name: Rename Marauder Flipper bin
         run: |
           mv ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin
           
+      - name: Configure SD Serial for Flipper Zero SD Serial
+        run: |
+          pwd
+          sed -i 's/^  \/\/#define WRITE_PACKETS_SERIAL/  #define WRITE_PACKETS_SERIAL/' esp32_marauder/configs.h
+          
+      - name: Build Marauder SD Serial for Flipper Zero WiFi Dev Board
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled
+          extra-arduino-cli-args: "--warnings none"
+          
+      - name: Rename Marauder Flipper SD Serial bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper_sd_serial.bin
+          
+      - name: Remove SD Serial
+        run: |
+          pwd
+          sed -i 's/^  #define WRITE_PACKETS_SERIAL/  \/\/#define WRITE_PACKETS_SERIAL/' esp32_marauder/configs.h
+          
+      - name: Build Marauder for Flipper Zero Multi Board
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:esp32s3:PartitionScheme=min_spiffs,FlashSize=8M,PSRAM=enabled
+          extra-arduino-cli-args: "--warnings none"
+          
+      - name: Rename Marauder Multi Board bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.esp32s3/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.esp32s3/esp32_marauder.multiboardS3.bin
+         
       - name: Configure TFT_eSPI and configs.h for OG Marauder
         run: |
           pwd
@@ -139,15 +175,15 @@ jobs:
           sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
           sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
           sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          sed -i 's/^  #define ESP32_LDDB/  \/\/#define ESP32_LDDB/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_DEV_BOARD_PRO/  \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h
           
       - name: Build Marauder for OG Marauder
         uses: ArminJo/arduino-test-compile@v3.2.0
         with:
           sketch-names: esp32_marauder.ino
           arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
-          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
           extra-arduino-cli-args: "--warnings none"
-          #extra-arduino-lib-install-args: "-zmuldefs"
           
       - name: Rename OG Marauder bin
         run: |
@@ -163,15 +199,15 @@ jobs:
           sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
           sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
           sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          sed -i 's/^  #define ESP32_LDDB/  \/\/#define ESP32_LDDB/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_DEV_BOARD_PRO/  \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h
           
       - name: Build Marauder for v6 Marauder
         uses: ArminJo/arduino-test-compile@v3.2.0
         with:
           sketch-names: esp32_marauder.ino
           arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
-          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
           extra-arduino-cli-args: "--warnings none"
-          #extra-arduino-lib-install-args: "-zmuldefs"
           
       - name: Rename v6 Marauder bin
         run: |
@@ -187,15 +223,15 @@ jobs:
           sed -i 's/^  \/\/#define MARAUDER_KIT/  #define MARAUDER_KIT/' esp32_marauder/configs.h
           sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
           sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          sed -i 's/^  #define ESP32_LDDB/  \/\/#define ESP32_LDDB/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_DEV_BOARD_PRO/  \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h
           
       - name: Build Marauder for Marauder Kit
         uses: ArminJo/arduino-test-compile@v3.2.0
         with:
           sketch-names: esp32_marauder.ino
           arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
-          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
           extra-arduino-cli-args: "--warnings none"
-          #extra-arduino-lib-install-args: "-zmuldefs"
           
       - name: Rename Marauder Kit bin
         run: |
@@ -211,19 +247,63 @@ jobs:
           sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
           sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
           sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          sed -i 's/^  #define ESP32_LDDB/  \/\/#define ESP32_LDDB/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_DEV_BOARD_PRO/  \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h
           
       - name: Build Marauder for Marauder Mini
         uses: ArminJo/arduino-test-compile@v3.2.0
         with:
           sketch-names: esp32_marauder.ino
           arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
-          #platform-url: https://github.com/espressif/arduino-esp32/releases/download/2.0.0-rc1/package_esp32_dev_index.json
           extra-arduino-cli-args: "--warnings none"
-          #extra-arduino-lib-install-args: "-zmuldefs"
           
       - name: Rename Marauder Mini bin
         run: |
           mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin
+          
+      - name: Configure TFT_eSPI and configs.h for ESP32 LDDB
+        run: |
+          sed -i 's/^  #define MARAUDER_MINI/  \/\/#define MARAUDER_MINI/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V4/  \/\/#define MARAUDER_V4/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V6/  \/\/#define MARAUDER_V6/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
+          sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          sed -i 's/^  \/\/#define ESP32_LDDB/  #define ESP32_LDDB/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_DEV_BOARD_PRO/  \/\/#define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h
+          
+      - name: Build Marauder for ESP32 LDDB
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
+          extra-arduino-cli-args: "--warnings none"
+          
+      - name: Rename Marauder ESP32 LDDB bin
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.esp32_lddb.bin
+
+      - name: Configure TFT_eSPI and configs.h for Marauder Dev Board Pro
+        run: |
+          sed -i 's/^  #define MARAUDER_MINI/  \/\/#define MARAUDER_MINI/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V4/  \/\/#define MARAUDER_V4/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_V6/  \/\/#define MARAUDER_V6/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_KIT/  \/\/#define MARAUDER_KIT/' esp32_marauder/configs.h
+          sed -i 's/^  #define GENERIC_ESP32/  \/\/#define GENERIC_ESP32/' esp32_marauder/configs.h
+          sed -i 's/^  #define MARAUDER_FLIPPER/  \/\/#define MARAUDER_FLIPPER/' esp32_marauder/configs.h
+          sed -i 's/^  #define ESP32_LDDB/  \/\/#define ESP32_LDDB/' esp32_marauder/configs.h
+          sed -i 's/^  \/\/#define MARAUDER_DEV_BOARD_PRO/  #define MARAUDER_DEV_BOARD_PRO/' esp32_marauder/configs.h
+          
+      - name: Build Marauder for Marauder Dev Board Pro
+        uses: ArminJo/arduino-test-compile@v3.2.0
+        with:
+          sketch-names: esp32_marauder.ino
+          arduino-board-fqbn: esp32:esp32:d32:PartitionScheme=min_spiffs
+          extra-arduino-cli-args: "--warnings none"
+          
+      - name: Rename Marauder for Marauder Dev Board Pro
+        run: |
+          mv ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.ino.bin ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_dev_board_pro.bin
 
       - name: Display finished bins
         run: |
@@ -236,6 +316,20 @@ jobs:
           path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin
           retention-days: 5
           
+      - name: 'Upload Flipper SD Serial Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.flipper_sd_serial.bin
+          path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper_sd_serial.bin
+          retention-days: 5
+          
+      - name: 'Upload MultiboardS3 Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.multiboardS3.bin
+          path: ./esp32_marauder/build/esp32.esp32.esp32s3/esp32_marauder.multiboardS3.bin
+          retention-days: 5
+          
       - name: 'Upload OG Artifact'
         uses: actions/upload-artifact@v3
         with:
@@ -264,6 +358,20 @@ jobs:
           path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin
           retention-days: 5
           
+      - name: 'Upload ESP32 LDDB Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.mini.bin
+          path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.esp32_lddb.bin
+          retention-days: 5
+          
+      - name: 'Upload Marauder Dev Board Pro Artifact'
+        uses: actions/upload-artifact@v3
+        with:
+          name: esp32_marauder.marauder_dev_board_pro.bin
+          path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_dev_board_pro.bin
+          retention-days: 5
+          
       - name: Create Release
         id: create_release
         uses: actions/create-release@v1
@@ -274,6 +382,7 @@ jobs:
           release_name: Release ${{ github.ref }}
           draft: true
           prerelease: false
+        if: github.event_name != 'pull_request'
           
       - name: Upload Flipper Asset
         id: upload-flipper-release-asset 
@@ -285,6 +394,31 @@ jobs:
           asset_path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper.bin
           asset_name: esp32_marauder.flipper.bin
           asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
+          
+      - name: Upload Flipper SD Serial Asset
+        id: upload-flipper-sd-serial-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.esp32s2/esp32_marauder.flipper_sd_serial.bin
+          asset_name: esp32_marauder.flipper_sd_serial.bin
+          asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
+          
+      - name: Upload MultiboardS3 Asset
+        id: upload-mutliboardS3-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.esp32s3/esp32_marauder.multiboardS3.bin
+          asset_name: esp32_marauder.mutliboardS3.bin
+          asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
           
       - name: Upload OG Asset
         id: upload-og-release-asset 
@@ -296,6 +430,7 @@ jobs:
           asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.og.bin
           asset_name: esp32_marauder.og.bin
           asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
           
       - name: Upload v6 Asset
         id: upload-v6-release-asset 
@@ -307,6 +442,7 @@ jobs:
           asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.v6.bin
           asset_name: esp32_marauder.v6.bin
           asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
           
       - name: Upload Kit Asset
         id: upload-kit-release-asset 
@@ -318,6 +454,7 @@ jobs:
           asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.kit.bin
           asset_name: esp32_marauder.kit.bin
           asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
           
       - name: Upload Mini Asset
         id: upload-mini-release-asset 
@@ -329,3 +466,28 @@ jobs:
           asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.mini.bin
           asset_name: esp32_marauder.mini.bin
           asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
+          
+      - name: Upload ESP32 LDDB Asset
+        id: upload-esp32-lddb-release-asset 
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.esp32_lddb.bin
+          asset_name: esp32_marauder.esp32_lddb.bin
+          asset_content_type: application/bin
+        if: github.event_name != 'pull_request'
+          
+      - name: Upload Marauder Dev Board Pro Asset
+        id: upload-marauder-dev-board-pro-release-asset
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./esp32_marauder/build/esp32.esp32.d32/esp32_marauder.marauder_dev_board_pro.bin
+          asset_name: esp32_marauder.marauder_dev_board_pro.bin
+          asset_content_type: application/bin
+        if: github.event_name != 'pull_request'

.gitignore

@@ -1,3 +1,4 @@
 
 .vscode/arduino.json
 .vscode/c_cpp_properties.json
+esp32_marauder/.vscode/settings.json

.gitmodules

@@ -0,0 +1,24 @@
+[submodule "esp32_marauder/libraries/lv_arduino"]
+	path = esp32_marauder/libraries/lv_arduino
+	url = git@github.com:lvgl/lv_arduino.git
+[submodule "esp32_marauder/libraries/LinkedList"]
+	path = esp32_marauder/libraries/LinkedList
+	url = git@github.com:ivanseidel/LinkedList.git
+[submodule "esp32_marauder/libraries/TFT_eSPI"]
+	path = esp32_marauder/libraries/TFT_eSPI
+	url = git@github.com:justcallmekoko/TFT_eSPI.git
+[submodule "esp32_marauder/libraries/JPEGDecoder"]
+	path = esp32_marauder/libraries/JPEGDecoder
+	url = git@github.com:Bodmer/JPEGDecoder.git
+[submodule "esp32_marauder/libraries/NimBLE-Arduino"]
+	path = esp32_marauder/libraries/NimBLE-Arduino
+	url = git@github.com:h2zero/NimBLE-Arduino.git
+[submodule "esp32_marauder/libraries/Adafruit_NeoPixel"]
+	path = esp32_marauder/libraries/Adafruit_NeoPixel
+	url = git@github.com:adafruit/Adafruit_NeoPixel.git
+[submodule "esp32_marauder/libraries/ArduinoJson"]
+	path = esp32_marauder/libraries/ArduinoJson
+	url = git@github.com:bblanchon/ArduinoJson.git
+[submodule "esp32_marauder/libraries/SwitchLib"]
+	path = esp32_marauder/libraries/SwitchLib
+	url = git@github.com:justcallmekoko/SwitchLib.git

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/3220-10-0300-00.lib

@@ -0,0 +1,35 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model 3220-10-0300-00
+#/13184465/987070/2.49/10/3/Connector
+DEF 3220-10-0300-00 J 0 30 Y Y 1 F N
+F0 "J" 750 300 50 H V L CNN
+F1 "3220-10-0300-00" 750 200 50 H V L CNN
+F2 "322010030000" 750 100 50 H I L CNN
+F3 "http://www.cnctech.us/pdfs/3220-XX-0300-00-TR_.PDF" 750 0 50 H I L CNN
+F4 "Conn Shrouded Header (4 Sides) HDR 10 POS 1.27mm Solder ST SMD" 750 -100 50 H I L CNN "Description"
+F5 "5.45" 750 -200 50 H I L CNN "Height"
+F6 "CNC Tech" 750 -300 50 H I L CNN "Manufacturer_Name"
+F7 "3220-10-0300-00" 750 -400 50 H I L CNN "Manufacturer_Part_Number"
+F8 "" 750 -500 50 H I L CNN "Mouser Part Number"
+F9 "" 750 -600 50 H I L CNN "Mouser Price/Stock"
+F10 "3220-10-0300-00" 750 -700 50 H I L CNN "Arrow Part Number"
+F11 "https://www.arrow.com/en/products/3220-10-0300-00/cnc-tech-llc?region=nac" 750 -800 50 H I L CNN "Arrow Price/Stock"
+F12 "" 750 -900 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 750 -1000 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X 1 1 0 0 200 R 50 50 0 0 P
+X 2 2 900 0 200 L 50 50 0 0 P
+X 3 3 0 -100 200 R 50 50 0 0 P
+X 4 4 900 -100 200 L 50 50 0 0 P
+X 5 5 0 -200 200 R 50 50 0 0 P
+X 6 6 900 -200 200 L 50 50 0 0 P
+X 7 7 0 -300 200 R 50 50 0 0 P
+X 8 8 900 -300 200 L 50 50 0 0 P
+X 9 9 0 -400 200 R 50 50 0 0 P
+X 10 10 900 -400 200 L 50 50 0 0 P
+P 5 0 1 6 200 100 700 100 700 -500 200 -500 200 100 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/322010030000.kicad_mod

@@ -0,0 +1,47 @@
+(module "322010030000" (layer F.Cu)
+  (descr "3220-10-0300-00-1")
+  (tags "Connector")
+  (attr smd)
+  (fp_text reference J** (at 0.000 -0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0.000 -0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "322010030000" (at 0.000 -0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -6.35 -2.5) (end 6.35 -2.5) (layer F.Fab) (width 0.1))
+  (fp_line (start 6.35 -2.5) (end 6.35 2.5) (layer F.Fab) (width 0.1))
+  (fp_line (start 6.35 2.5) (end -6.35 2.5) (layer F.Fab) (width 0.1))
+  (fp_line (start -6.35 2.5) (end -6.35 -2.5) (layer F.Fab) (width 0.1))
+  (fp_line (start -7.35 -4.15) (end 7.35 -4.15) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 7.35 -4.15) (end 7.35 4.15) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 7.35 4.15) (end -7.35 4.15) (layer F.CrtYd) (width 0.1))
+  (fp_line (start -7.35 4.15) (end -7.35 -4.15) (layer F.CrtYd) (width 0.1))
+  (fp_line (start -3.4 -2.5) (end -6.35 -2.5) (layer F.SilkS) (width 0.2))
+  (fp_line (start -6.35 -2.5) (end -6.35 2.5) (layer F.SilkS) (width 0.2))
+  (fp_line (start -6.35 2.5) (end -3.4 2.5) (layer F.SilkS) (width 0.2))
+  (fp_line (start -2.6 3.6) (end -2.6 3.6) (layer F.SilkS) (width 0.1))
+  (fp_line (start -2.5 3.6) (end -2.5 3.6) (layer F.SilkS) (width 0.1))
+  (fp_line (start 3.4 -2.5) (end 6.35 -2.5) (layer F.SilkS) (width 0.2))
+  (fp_line (start 6.35 -2.5) (end 6.35 2.5) (layer F.SilkS) (width 0.2))
+  (fp_line (start 6.35 2.5) (end 3.4 2.5) (layer F.SilkS) (width 0.2))
+  (fp_arc (start -2.55 3.6) (end -2.600 3.6) (angle -180) (layer F.SilkS) (width 0.1))
+  (fp_arc (start -2.55 3.6) (end -2.500 3.6) (angle -180) (layer F.SilkS) (width 0.1))
+  (pad 1 smd rect (at -2.540 1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at -2.540 -1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -1.270 1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at -1.270 -1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 5 smd rect (at 0.000 1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 6 smd rect (at 0.000 -1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 7 smd rect (at 1.270 1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 8 smd rect (at 1.270 -1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 9 smd rect (at 2.540 1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (pad 10 smd rect (at 2.540 -1.765 0) (size 0.650 2.770) (layers F.Cu F.Paste F.Mask))
+  (model 3220-10-0300-00.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/503398-1892.kicad_mod

@@ -0,0 +1,51 @@
+(module "503398-1892" (layer F.Cu)
+  (descr "503398-1892")
+  (tags "Connector")
+  (attr smd)
+  (fp_text reference J** (at 5.996 8.167) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 5.996 8.167) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "503398-1892" (at 5.996 8.167) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start 0 0) (end 0 14.05) (layer F.Fab) (width 0.2))
+  (fp_line (start 0 14.05) (end 13.1 14.05) (layer F.Fab) (width 0.2))
+  (fp_line (start 13.1 14.05) (end 13.1 0) (layer F.Fab) (width 0.2))
+  (fp_line (start 0 0) (end 2.849 0) (layer F.Fab) (width 0.2))
+  (fp_line (start 13.1 0) (end 12.474 0) (layer F.Fab) (width 0.2))
+  (fp_line (start 12.474 0) (end 12.474 2.42) (layer F.Fab) (width 0.2))
+  (fp_line (start 12.474 2.42) (end 3.554 2.42) (layer F.Fab) (width 0.2))
+  (fp_line (start 2.849 0) (end 3.554 2.42) (layer F.Fab) (width 0.2))
+  (fp_line (start 0 0) (end 2.849 0) (layer F.SilkS) (width 0.2))
+  (fp_line (start 2.849 0) (end 3.554 2.42) (layer F.SilkS) (width 0.2))
+  (fp_line (start 3.554 2.42) (end 12.109 2.42) (layer F.SilkS) (width 0.2))
+  (fp_line (start 13.1 3.65) (end 13.1 10.65) (layer F.SilkS) (width 0.2))
+  (fp_line (start 0 2.65) (end 0 10.648) (layer F.SilkS) (width 0.2))
+  (fp_line (start 13.1 0) (end 12.474 0) (layer F.SilkS) (width 0.2))
+  (fp_line (start 7.5 14.05) (end 12.3 14.05) (layer F.SilkS) (width 0.2))
+  (fp_line (start 3.15 14.05) (end 5.8 14.05) (layer F.SilkS) (width 0.2))
+  (fp_line (start 0.74 14.05) (end 1.6 14.05) (layer F.SilkS) (width 0.2))
+  (fp_circle (center 4.116 0.356) (end 4.116 0.41057) (layer F.SilkS) (width 0.2))
+  (pad 1 smd rect (at 4.17 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at 5.27 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at 6.37 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at 7.47 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 5 smd rect (at 8.57 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 6 smd rect (at 9.67 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 7 smd rect (at 10.77 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 8 smd rect (at 11.87 1.4 0) (size 0.7 1.1) (layers F.Cu F.Paste F.Mask))
+  (pad 9 smd rect (at 2.38 13.865 0) (size 0.9 0.93) (layers F.Cu F.Paste F.Mask))
+  (pad 10 smd rect (at 6.645 13.94 90) (size 0.78 1.05) (layers F.Cu F.Paste F.Mask))
+  (pad 11 smd rect (at 13.03 12.665 0) (size 0.7 3.33) (layers F.Cu F.Paste F.Mask))
+  (pad 12 smd rect (at 12.95 1.9 0) (size 0.86 2.8) (layers F.Cu F.Paste F.Mask))
+  (pad 13 smd rect (at 0.29 1.415 0) (size 1.14 1.83) (layers F.Cu F.Paste F.Mask))
+  (pad 14 smd rect (at 0.07 12.665 0) (size 0.7 3.33) (layers F.Cu F.Paste F.Mask))
+  (model 503398-1892.stp
+    (at (xyz 0.25787402325728 -0.31968503486453 0.02362204818275))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/503398-1892.lib

@@ -0,0 +1,35 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model 503398-1892
+#/269057/987070/2.49/10/4/Connector
+DEF 503398-1892 J 0 30 Y Y 1 F N
+F0 "J" 1550 300 50 H V L CNN
+F1 "503398-1892" 1550 200 50 H V L CNN
+F2 "503398-1892" 1550 100 50 H I L CNN
+F3 "http://www.molex.com/webdocs/datasheets/pdf/en-us//5033981892_MEMORY_CARD_SOCKET.pdf" 1550 0 50 H I L CNN
+F4 "MicroSD SMT Push-Push 1.28mm height MicroSD SMT Push-Push 1.28mm height" 1550 -100 50 H I L CNN "Description"
+F5 "" 1550 -200 50 H I L CNN "Height"
+F6 "Molex" 1550 -300 50 H I L CNN "Manufacturer_Name"
+F7 "503398-1892" 1550 -400 50 H I L CNN "Manufacturer_Part_Number"
+F8 "538-503398-1892" 1550 -500 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/Molex/503398-1892?qs=b0v8CoHHvSMxV%252BW12iKaSg%3D%3D" 1550 -600 50 H I L CNN "Mouser Price/Stock"
+F10 "" 1550 -700 50 H I L CNN "Arrow Part Number"
+F11 "" 1550 -800 50 H I L CNN "Arrow Price/Stock"
+F12 "" 1550 -900 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 1550 -1000 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X DAT2 1 0 0 200 R 50 50 0 0 P
+X CD/DAT3 2 0 -100 200 R 50 50 0 0 P
+X CMD 3 0 -200 200 R 50 50 0 0 P
+X VDD 4 0 -300 200 R 50 50 0 0 P
+X CLK 5 0 -400 200 R 50 50 0 0 P
+X VSS 6 1700 0 200 L 50 50 0 0 P
+X DAT0 7 1700 -100 200 L 50 50 0 0 P
+X DAT1 8 1700 -200 200 L 50 50 0 0 P
+X DETECT_LEVER 9 1700 -300 200 L 50 50 0 0 P
+X DETECT_SWITCH 10 1700 -400 200 L 50 50 0 0 P
+P 5 0 1 6 200 100 1500 100 1500 -500 200 -500 200 100 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/CAPC1005X55N.kicad_mod

@@ -0,0 +1,29 @@
+(module "CAPC1005X55N" (layer F.Cu)
+  (descr "CC0402")
+  (tags "Capacitor")
+  (attr smd)
+  (fp_text reference C** (at 0 0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0 0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "CAPC1005X55N" (at 0 0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -0.91 -0.46) (end 0.91 -0.46) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 0.91 -0.46) (end 0.91 0.46) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 0.91 0.46) (end -0.91 0.46) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -0.91 0.46) (end -0.91 -0.46) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -0.5 -0.25) (end 0.5 -0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 0.5 -0.25) (end 0.5 0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 0.5 0.25) (end -0.5 0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start -0.5 0.25) (end -0.5 -0.25) (layer F.Fab) (width 0.1))
+  (pad 1 smd rect (at -0.46 0 0) (size 0.6 0.62) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at 0.46 0 0) (size 0.6 0.62) (layers F.Cu F.Paste F.Mask))
+  (model CC0402KRX7R7BB104.stp
+    (at (xyz -0.020472440193957 -0.011023622094177 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz -90 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/CAPC1005X60N.kicad_mod

@@ -0,0 +1,29 @@
+(module "CAPC1005X60N" (layer F.Cu)
+  (descr "CL05A105KA5NQNC")
+  (tags "Capacitor")
+  (attr smd)
+  (fp_text reference C** (at 0 0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0 0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "CAPC1005X60N" (at 0 0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -0.92 -0.47) (end 0.92 -0.47) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 0.92 -0.47) (end 0.92 0.47) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 0.92 0.47) (end -0.92 0.47) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -0.92 0.47) (end -0.92 -0.47) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -0.5 -0.25) (end 0.5 -0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 0.5 -0.25) (end 0.5 0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 0.5 0.25) (end -0.5 0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start -0.5 0.25) (end -0.5 -0.25) (layer F.Fab) (width 0.1))
+  (pad 1 smd rect (at -0.46 0 0) (size 0.62 0.64) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at 0.46 0 0) (size 0.62 0.64) (layers F.Cu F.Paste F.Mask))
+  (model CL05A105KA5NQNC.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/CC0402KRX7R7BB104.lib

@@ -0,0 +1,30 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model CC0402KRX7R7BB104
+#/319043/987070/2.49/2/4/Capacitor
+DEF CC0402KRX7R7BB104 C 0 30 Y Y 1 F N
+F0 "C" 350 250 50 H V L CNN
+F1 "CC0402KRX7R7BB104" 350 150 50 H V L CNN
+F2 "CAPC1005X55N" 350 50 50 H I L CNN
+F3 "http://www.datasheets360.com/pdf/-5354154806277341459" 350 -50 50 H I L CNN
+F4 "Cap 100nF 16V 0402 SMD 10% X7R Phycomp 100nF Multilayer Ceramic Capacitor (MLCC) 16 V dc +/-10% X7R dielectric Standard max op. temp. +125C" 350 -150 50 H I L CNN "Description"
+F5 "0.55" 350 -250 50 H I L CNN "Height"
+F6 "KEMET" 350 -350 50 H I L CNN "Manufacturer_Name"
+F7 "CC0402KRX7R7BB104" 350 -450 50 H I L CNN "Manufacturer_Part_Number"
+F8 "603-CC402KRX7R7BB104" 350 -550 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/YAGEO/CC0402KRX7R7BB104?qs=AgBp2OyFlx%252BSOyhfyS7hpw%3D%3D" 350 -650 50 H I L CNN "Mouser Price/Stock"
+F10 "CC0402KRX7R7BB104" 350 -750 50 H I L CNN "Arrow Part Number"
+F11 "https://www.arrow.com/en/products/cc0402krx7r7bb104/yageo?region=nac" 350 -850 50 H I L CNN "Arrow Price/Stock"
+F12 "" 350 -950 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 350 -1050 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X ~ 1 0 0 200 R 50 50 0 0 P
+X ~ 2 500 0 200 L 50 50 0 0 P
+P 2 0 1 6 220 100 220 -100 N
+P 2 0 1 6 280 100 280 -100 N
+P 2 0 1 6 200 0 220 0 N
+P 2 0 1 6 280 0 300 0 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/CL05A105KA5NQNC.lib

@@ -0,0 +1,30 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model CL05A105KA5NQNC
+#/1601150/987070/2.49/2/3/Capacitor
+DEF CL05A105KA5NQNC C 0 30 Y Y 1 F N
+F0 "C" 350 250 50 H V L CNN
+F1 "CL05A105KA5NQNC" 350 150 50 H V L CNN
+F2 "CAPC1005X60N" 350 50 50 H I L CNN
+F3 "https://www.arrow.com/en/products/cl05a105ka5nqnc/samsung-electro-mechanics" 350 -50 50 H I L CNN
+F4 "Cap Ceramic 1uF 25V X5R 10% Pad SMD 0402 85C T/R" 350 -150 50 H I L CNN "Description"
+F5 "0.6" 350 -250 50 H I L CNN "Height"
+F6 "Samsung Electro-Mechanics" 350 -350 50 H I L CNN "Manufacturer_Name"
+F7 "CL05A105KA5NQNC" 350 -450 50 H I L CNN "Manufacturer_Part_Number"
+F8 "187-CL05A105KA5NQNC" 350 -550 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/Samsung-Electro-Mechanics/CL05A105KA5NQNC?qs=X6jEic%2FHinDIeFgZnm60Lw%3D%3D" 350 -650 50 H I L CNN "Mouser Price/Stock"
+F10 "CL05A105KA5NQNC" 350 -750 50 H I L CNN "Arrow Part Number"
+F11 "https://www.arrow.com/en/products/cl05a105ka5nqnc/samsung-electro-mechanics?region=europe" 350 -850 50 H I L CNN "Arrow Price/Stock"
+F12 "" 350 -950 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 350 -1050 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X ~ 1 0 0 200 R 50 50 0 0 P
+X ~ 2 500 0 200 L 50 50 0 0 P
+P 2 0 1 6 220 100 220 -100 N
+P 2 0 1 6 280 100 280 -100 N
+P 2 0 1 6 200 0 220 0 N
+P 2 0 1 6 280 0 300 0 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/CL05B104KO5NNNC.lib

@@ -0,0 +1,30 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model CL05B104KO5NNNC
+#/563787/987070/2.49/2/3/Capacitor
+DEF CL05B104KO5NNNC C 0 30 Y Y 1 F N
+F0 "C" 350 250 50 H V L CNN
+F1 "CL05B104KO5NNNC" 350 150 50 H V L CNN
+F2 "CAPC1005X55N" 350 50 50 H I L CNN
+F3 "https://datasheet.datasheetarchive.com/originals/distributors/Datasheets-DGA10/2408147.pdf" 350 -50 50 H I L CNN
+F4 "Samsung Electro-Mechanics CL05B104KO5NNNC 100nF Multilayer Ceramic Capacitor MLCC 16V dc +/-10% Tolerance SMD" 350 -150 50 H I L CNN "Description"
+F5 "0.55" 350 -250 50 H I L CNN "Height"
+F6 "Samsung Electro-Mechanics" 350 -350 50 H I L CNN "Manufacturer_Name"
+F7 "CL05B104KO5NNNC" 350 -450 50 H I L CNN "Manufacturer_Part_Number"
+F8 "187-CL05B104KO5NNNC" 350 -550 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/Samsung-Electro-Mechanics/CL05B104KO5NNNC?qs=hqM3L16%252BxlfT2SKOuAUq6Q%3D%3D" 350 -650 50 H I L CNN "Mouser Price/Stock"
+F10 "CL05B104KO5NNNC" 350 -750 50 H I L CNN "Arrow Part Number"
+F11 "https://www.arrow.com/en/products/cl05b104ko5nnnc/samsung-electro-mechanics?region=europe" 350 -850 50 H I L CNN "Arrow Price/Stock"
+F12 "" 350 -950 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 350 -1050 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X ~ 1 0 0 200 R 50 50 0 0 P
+X ~ 2 500 0 200 L 50 50 0 0 P
+P 2 0 1 6 220 100 220 -100 N
+P 2 0 1 6 280 100 280 -100 N
+P 2 0 1 6 200 0 220 0 N
+P 2 0 1 6 280 0 300 0 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/DZ254S-11-10-48.lib

@@ -0,0 +1,35 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model DZ254S-11-10-48
+#/17126707/987070/2.49/10/0/Connector
+DEF DZ254S-11-10-48 J 0 30 Y Y 1 F N
+F0 "J" 750 300 50 H V L CNN
+F1 "DZ254S-11-10-48" 750 200 50 H V L CNN
+F2 "HUSRSP10W66P254_2500X250X850P" 750 100 50 H I L CNN
+F3 "https://datasheet.lcsc.com/lcsc/2209141730_DEALON-DZ254S-11-10-48_C5160793.pdf" 750 0 50 H I L CNN
+F4 "Brick nogging Square Pins 1 10 2.54mm 1x10P SMD,P=2.54mm() Pin Headers ROHS" 750 -100 50 H I L CNN "Description"
+F5 "" 750 -200 50 H I L CNN "Height"
+F6 "DEALON" 750 -300 50 H I L CNN "Manufacturer_Name"
+F7 "DZ254S-11-10-48" 750 -400 50 H I L CNN "Manufacturer_Part_Number"
+F8 "" 750 -500 50 H I L CNN "Mouser Part Number"
+F9 "" 750 -600 50 H I L CNN "Mouser Price/Stock"
+F10 "" 750 -700 50 H I L CNN "Arrow Part Number"
+F11 "" 750 -800 50 H I L CNN "Arrow Price/Stock"
+F12 "" 750 -900 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 750 -1000 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X 1 1 0 0 200 R 50 50 0 0 P
+X 2 2 0 -100 200 R 50 50 0 0 P
+X 3 3 0 -200 200 R 50 50 0 0 P
+X 4 4 0 -300 200 R 50 50 0 0 P
+X 5 5 0 -400 200 R 50 50 0 0 P
+X 6 6 900 0 200 L 50 50 0 0 P
+X 7 7 900 -100 200 L 50 50 0 0 P
+X 8 8 900 -200 200 L 50 50 0 0 P
+X 9 9 900 -300 200 L 50 50 0 0 P
+X 10 10 900 -400 200 L 50 50 0 0 P
+P 5 0 1 6 200 100 700 100 700 -500 200 -500 200 100 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/ESP32-WROOM-32E-N4.lib

@@ -0,0 +1,72 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model ESP32-WROOM-32E-N4
+#/15884694/987070/2.49/47/4/Integrated Circuit
+DEF ESP32-WROOM-32E-N4 IC 0 30 Y Y 1 F N
+F0 "IC" 1350 300 50 H V L CNN
+F1 "ESP32-WROOM-32E-N4" 1350 200 50 H V L CNN
+F2 "ESP32WROOM32EN4" 1350 100 50 H I L CNN
+F3 "https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf" 1350 0 50 H I L CNN
+F4 "RX TXRX MOD WIFI TRACE ANT SMD" 1350 -100 50 H I L CNN "Description"
+F5 "3.25" 1350 -200 50 H I L CNN "Height"
+F6 "Espressif Systems" 1350 -300 50 H I L CNN "Manufacturer_Name"
+F7 "ESP32-WROOM-32E-N4" 1350 -400 50 H I L CNN "Manufacturer_Part_Number"
+F8 "356-ESP32WRM32E132PH" 1350 -500 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/Espressif-Systems/ESP32-WROOM-32E-N4?qs=Li%252BoUPsLEnsPzTWsi%252BRMgQ%3D%3D" 1350 -600 50 H I L CNN "Mouser Price/Stock"
+F10 "" 1350 -700 50 H I L CNN "Arrow Part Number"
+F11 "" 1350 -800 50 H I L CNN "Arrow Price/Stock"
+F12 "" 1350 -900 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 1350 -1000 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X GND_1 1 0 0 200 R 50 50 0 0 P
+X 3V3 2 0 -100 200 R 50 50 0 0 P
+X EN 3 0 -200 200 R 50 50 0 0 P
+X SENSOR_VP 4 0 -300 200 R 50 50 0 0 P
+X SENSOR_VN 5 0 -400 200 R 50 50 0 0 P
+X IO34 6 0 -500 200 R 50 50 0 0 P
+X IO35 7 0 -600 200 R 50 50 0 0 P
+X IO32 8 0 -700 200 R 50 50 0 0 P
+X IO33 9 0 -800 200 R 50 50 0 0 P
+X IO25 10 0 -900 200 R 50 50 0 0 P
+X IO26 11 0 -1000 200 R 50 50 0 0 P
+X IO27 12 0 -1100 200 R 50 50 0 0 P
+X IO14 13 0 -1200 200 R 50 50 0 0 P
+X IO12 14 0 -1300 200 R 50 50 0 0 P
+X GND_2 15 0 -1400 200 R 50 50 0 0 P
+X IO13 16 0 -1500 200 R 50 50 0 0 P
+X NC_1 17 0 -1600 200 R 50 50 0 0 P
+X NC_2 18 0 -1700 200 R 50 50 0 0 P
+X NC_3 19 0 -1800 200 R 50 50 0 0 P
+X NC_4 20 0 -1900 200 R 50 50 0 0 P
+X NC_5 21 0 -2000 200 R 50 50 0 0 P
+X NC_6 22 0 -2100 200 R 50 50 0 0 P
+X IO15 23 0 -2200 200 R 50 50 0 0 P
+X IO2 24 0 -2300 200 R 50 50 0 0 P
+X IO0 25 1500 0 200 L 50 50 0 0 P
+X IO4 26 1500 -100 200 L 50 50 0 0 P
+X IO16 27 1500 -200 200 L 50 50 0 0 P
+X IO17 28 1500 -300 200 L 50 50 0 0 P
+X IO5 29 1500 -400 200 L 50 50 0 0 P
+X IO18 30 1500 -500 200 L 50 50 0 0 P
+X IO19 31 1500 -600 200 L 50 50 0 0 P
+X NC_7 32 1500 -700 200 L 50 50 0 0 P
+X IO21 33 1500 -800 200 L 50 50 0 0 P
+X RXD0 34 1500 -900 200 L 50 50 0 0 P
+X TXD0 35 1500 -1000 200 L 50 50 0 0 P
+X IO22 36 1500 -1100 200 L 50 50 0 0 P
+X IO23 37 1500 -1200 200 L 50 50 0 0 P
+X GND_3 38 1500 -1300 200 L 50 50 0 0 P
+X GND_4 39 1500 -1400 200 L 50 50 0 0 P
+X GND_5 40 1500 -1500 200 L 50 50 0 0 P
+X GND_6 41 1500 -1600 200 L 50 50 0 0 P
+X GND_7 42 1500 -1700 200 L 50 50 0 0 P
+X GND_8 43 1500 -1800 200 L 50 50 0 0 P
+X GND_9 44 1500 -1900 200 L 50 50 0 0 P
+X GND_10 45 1500 -2000 200 L 50 50 0 0 P
+X GND_11 46 1500 -2100 200 L 50 50 0 0 P
+X GND_12 47 1500 -2200 200 L 50 50 0 0 P
+P 5 0 1 6 200 100 1300 100 1300 -2400 200 -2400 200 100 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/ESP32WROOM32EN4.kicad_mod

@@ -0,0 +1,85 @@
+(module "ESP32WROOM32EN4" (layer F.Cu)
+  (descr "ESP32-WROOM-32E-N4-1")
+  (tags "Integrated Circuit")
+  (attr smd)
+  (fp_text reference IC** (at 0.000 0.25) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0.000 0.25) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "ESP32WROOM32EN4" (at 0.000 0.25) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -9 12.75) (end 9 12.75) (layer F.Fab) (width 0.1))
+  (fp_line (start 9 12.75) (end 9 -12.75) (layer F.Fab) (width 0.1))
+  (fp_line (start 9 -12.75) (end -9 -12.75) (layer F.Fab) (width 0.1))
+  (fp_line (start -9 -12.75) (end -9 12.75) (layer F.Fab) (width 0.1))
+  (fp_line (start -10.5 -13.75) (end 10.5 -13.75) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 10.5 -13.75) (end 10.5 14.25) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 10.5 14.25) (end -10.5 14.25) (layer F.CrtYd) (width 0.1))
+  (fp_line (start -10.5 14.25) (end -10.5 -13.75) (layer F.CrtYd) (width 0.1))
+  (fp_line (start -9 -6) (end -9 -12.75) (layer F.SilkS) (width 0.2))
+  (fp_line (start -9 -12.75) (end 9 -12.75) (layer F.SilkS) (width 0.2))
+  (fp_line (start 9 -12.75) (end 9 -6) (layer F.SilkS) (width 0.2))
+  (fp_line (start 9 12) (end 9 12.75) (layer F.SilkS) (width 0.2))
+  (fp_line (start 9 12.75) (end 6.5 12.75) (layer F.SilkS) (width 0.2))
+  (fp_line (start -6.5 12.75) (end -9 12.75) (layer F.SilkS) (width 0.2))
+  (fp_line (start -9 12.75) (end -9 12) (layer F.SilkS) (width 0.2))
+  (fp_line (start -10.1 -5.26) (end -10.1 -5.26) (layer F.SilkS) (width 0.1))
+  (fp_line (start -10 -5.26) (end -10 -5.26) (layer F.SilkS) (width 0.1))
+  (fp_arc (start -10.05 -5.26) (end -10.100 -5.26) (angle -180) (layer F.SilkS) (width 0.1))
+  (fp_arc (start -10.05 -5.26) (end -10.000 -5.26) (angle -180) (layer F.SilkS) (width 0.1))
+  (pad 1 smd rect (at -8.750 -5.26 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at -8.750 -3.99 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -8.750 -2.72 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at -8.750 -1.45 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 5 smd rect (at -8.750 -0.18 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 6 smd rect (at -8.750 1.09 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 7 smd rect (at -8.750 2.36 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 8 smd rect (at -8.750 3.63 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 9 smd rect (at -8.750 4.9 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 10 smd rect (at -8.750 6.17 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 11 smd rect (at -8.750 7.44 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 12 smd rect (at -8.750 8.71 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 13 smd rect (at -8.750 9.98 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 14 smd rect (at -8.750 11.25 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 15 smd rect (at -5.715 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 16 smd rect (at -4.445 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 17 smd rect (at -3.175 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 18 smd rect (at -1.905 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 19 smd rect (at -0.635 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 20 smd rect (at 0.635 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 21 smd rect (at 1.905 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 22 smd rect (at 3.175 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 23 smd rect (at 4.445 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 24 smd rect (at 5.715 12.5 0) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 25 smd rect (at 8.750 11.25 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 26 smd rect (at 8.750 9.98 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 27 smd rect (at 8.750 8.71 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 28 smd rect (at 8.750 7.44 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 29 smd rect (at 8.750 6.17 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 30 smd rect (at 8.750 4.9 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 31 smd rect (at 8.750 3.63 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 32 smd rect (at 8.750 2.36 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 33 smd rect (at 8.750 1.09 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 34 smd rect (at 8.750 -0.18 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 35 smd rect (at 8.750 -1.45 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 36 smd rect (at 8.750 -2.72 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 37 smd rect (at 8.750 -3.99 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 38 smd rect (at 8.750 -5.26 90) (size 0.900 1.500) (layers F.Cu F.Paste F.Mask))
+  (pad 39 smd rect (at -2.900 1.06 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 40 smd rect (at -2.900 2.46 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 41 smd rect (at -2.900 3.86 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 42 smd rect (at -1.500 3.86 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 43 smd rect (at -0.100 3.86 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 44 smd rect (at -0.100 2.46 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 45 smd rect (at -0.100 1.06 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 46 smd rect (at -1.500 1.06 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (pad 47 smd rect (at -1.500 2.46 90) (size 0.900 0.900) (layers F.Cu F.Paste F.Mask))
+  (model ESP32-WROOM-32E-N4.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/HUSRSP10W66P254_2500X250X850P.kicad_mod

@@ -0,0 +1,39 @@
+(module "HUSRSP10W66P254_2500X250X850P" (layer F.Cu)
+  (descr "DZ254S-11-10-48")
+  (tags "Connector")
+  (attr smd)
+  (fp_text reference J** (at 0 0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0 0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "HUSRSP10W66P254_2500X250X850P" (at 0 0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -12.75 -4.01) (end 12.75 -4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 12.75 -4.01) (end 12.75 4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 12.75 4.01) (end -12.75 4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -12.75 4.01) (end -12.75 -4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -12.5 -1.25) (end 12.5 -1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 12.5 -1.25) (end 12.5 1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 12.5 1.25) (end -12.5 1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start -12.5 1.25) (end -12.5 -1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start -12.5 1.25) (end -12.5 -3.76) (layer F.SilkS) (width 0.2))
+  (fp_line (start 12.5 1.25) (end 12.5 -1.25) (layer F.SilkS) (width 0.2))
+  (pad 1 smd rect (at -11.43 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at -8.89 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -6.35 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at -3.81 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 5 smd rect (at -1.27 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 6 smd rect (at 1.27 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 7 smd rect (at 3.81 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 8 smd rect (at 6.35 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 9 smd rect (at 8.89 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 10 smd rect (at 11.43 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (model DZ254S-11-10-48.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/HUSRSP8W66P254_2000X250X850P.kicad_mod

@@ -0,0 +1,37 @@
+(module "HUSRSP8W66P254_2000X250X850P" (layer F.Cu)
+  (descr "X6511WVS-08H-C60D48R2")
+  (tags "Connector")
+  (attr smd)
+  (fp_text reference J** (at 0 0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0 0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "HUSRSP8W66P254_2000X250X850P" (at 0 0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -10.25 -4.01) (end 10.25 -4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 10.25 -4.01) (end 10.25 4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 10.25 4.01) (end -10.25 4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -10.25 4.01) (end -10.25 -4.01) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -10 -1.25) (end 10 -1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 10 -1.25) (end 10 1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 10 1.25) (end -10 1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start -10 1.25) (end -10 -1.25) (layer F.Fab) (width 0.1))
+  (fp_line (start -10 1.25) (end -10 -3.76) (layer F.SilkS) (width 0.2))
+  (fp_line (start 10 1.25) (end 10 -1.25) (layer F.SilkS) (width 0.2))
+  (pad 1 smd rect (at -8.89 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at -6.35 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -3.81 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at -1.27 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 5 smd rect (at 1.27 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 6 smd rect (at 3.81 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 7 smd rect (at 6.35 -1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (pad 8 smd rect (at 8.89 1.04 0) (size 0.96 5.44) (layers F.Cu F.Paste F.Mask))
+  (model X6511WVS-08H-C60D48R2.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/RC0402FR-0710KL.lib

@@ -0,0 +1,27 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model RC0402FR-0710KL
+#/541505/987070/2.49/2/3/Resistor
+DEF RC0402FR-0710KL R 0 30 Y Y 1 F N
+F0 "R" 550 250 50 H V L CNN
+F1 "RC0402FR-0710KL" 550 150 50 H V L CNN
+F2 "RESC1005X40N" 550 50 50 H I L CNN
+F3 "https://datasheet.datasheetarchive.com/originals/distributors/Datasheets_SAMA/902f9e387b938f871d31120f5fc1d65e.pdf" 550 -50 50 H I L CNN
+F4 "YAGEO (PHYCOMP) - RC0402FR-0710KL. - RES, THICK FILM, 10K, 1%, 0.0625W, 0402" 550 -150 50 H I L CNN "Description"
+F5 "0.4" 550 -250 50 H I L CNN "Height"
+F6 "KEMET" 550 -350 50 H I L CNN "Manufacturer_Name"
+F7 "RC0402FR-0710KL" 550 -450 50 H I L CNN "Manufacturer_Part_Number"
+F8 "603-RC0402FR-0710KL" 550 -550 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/YAGEO/RC0402FR-0710KL?qs=I1mnnYJTTsxUoNwrUsQExA%3D%3D" 550 -650 50 H I L CNN "Mouser Price/Stock"
+F10 "RC0402FR-0710KL" 550 -750 50 H I L CNN "Arrow Part Number"
+F11 "https://www.arrow.com/en/products/rc0402fr-0710kl/yageo?region=europe" 550 -850 50 H I L CNN "Arrow Price/Stock"
+F12 "" 550 -950 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 550 -1050 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X ~ 1 0 0 200 R 50 50 0 0 P
+X ~ 2 700 0 200 L 50 50 0 0 P
+P 5 0 1 6 200 50 500 50 500 -50 200 -50 200 50 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/RC0402FR-07220RL.lib

@@ -0,0 +1,27 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model RC0402FR-07220RL
+#/349197/987070/2.49/2/5/Resistor
+DEF RC0402FR-07220RL R 0 30 Y Y 1 F N
+F0 "R" 550 250 50 H V L CNN
+F1 "RC0402FR-07220RL" 550 150 50 H V L CNN
+F2 "RESC1005X40N" 550 50 50 H I L CNN
+F3 "https://datasheet.datasheetarchive.com/originals/distributors/Datasheets_SAMA/902f9e387b938f871d31120f5fc1d65e.pdf" 550 -50 50 H I L CNN
+F4 "YAGEO (PHYCOMP) - RC0402FR-07220RL - RES, THICK FILM, 220R, 1%, 0.063W, 0402" 550 -150 50 H I L CNN "Description"
+F5 "0.4" 550 -250 50 H I L CNN "Height"
+F6 "KEMET" 550 -350 50 H I L CNN "Manufacturer_Name"
+F7 "RC0402FR-07220RL" 550 -450 50 H I L CNN "Manufacturer_Part_Number"
+F8 "603-RC0402FR-07220RL" 550 -550 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/YAGEO/RC0402FR-07220RL?qs=UOUeRUa%252B8Wkw9iNOZEwgHw%3D%3D" 550 -650 50 H I L CNN "Mouser Price/Stock"
+F10 "RC0402FR-07220RL" 550 -750 50 H I L CNN "Arrow Part Number"
+F11 "https://www.arrow.com/en/products/rc0402fr-07220rl/yageo?region=nac" 550 -850 50 H I L CNN "Arrow Price/Stock"
+F12 "" 550 -950 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 550 -1050 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X ~ 1 0 0 200 R 50 50 0 0 P
+X ~ 2 700 0 200 L 50 50 0 0 P
+P 5 0 1 6 200 50 500 50 500 -50 200 -50 200 50 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/RESC1005X40N.kicad_mod

@@ -0,0 +1,29 @@
+(module "RESC1005X40N" (layer F.Cu)
+  (descr "RC0402")
+  (tags "Resistor")
+  (attr smd)
+  (fp_text reference R** (at 0 0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0 0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "RESC1005X40N" (at 0 0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -1.175 -0.55) (end 1.175 -0.55) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 1.175 -0.55) (end 1.175 0.55) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 1.175 0.55) (end -1.175 0.55) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -1.175 0.55) (end -1.175 -0.55) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -0.5 -0.25) (end 0.5 -0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 0.5 -0.25) (end 0.5 0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start 0.5 0.25) (end -0.5 0.25) (layer F.Fab) (width 0.1))
+  (fp_line (start -0.5 0.25) (end -0.5 -0.25) (layer F.Fab) (width 0.1))
+  (pad 1 smd rect (at -0.55 0 90) (size 0.6 0.75) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at 0.55 0 90) (size 0.6 0.75) (layers F.Cu F.Paste F.Mask))
+  (model RC0402FR-07220RL.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/SKRPABE010.kicad_mod

@@ -0,0 +1,40 @@
+(module "SKRPABE010" (layer F.Cu)
+  (descr "SKRPABE010-1")
+  (tags "Switch")
+  (attr smd)
+  (fp_text reference S** (at 0.000 -0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0.000 -0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "SKRPABE010" (at 0.000 -0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -2.1 -1.6) (end 2.1 -1.6) (layer F.Fab) (width 0.2))
+  (fp_line (start 2.1 -1.6) (end 2.1 1.6) (layer F.Fab) (width 0.2))
+  (fp_line (start 2.1 1.6) (end -2.1 1.6) (layer F.Fab) (width 0.2))
+  (fp_line (start -2.1 1.6) (end -2.1 -1.6) (layer F.Fab) (width 0.2))
+  (fp_line (start -3.6 -2.6) (end 3.6 -2.6) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 3.6 -2.6) (end 3.6 2.6) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 3.6 2.6) (end -3.6 2.6) (layer F.CrtYd) (width 0.1))
+  (fp_line (start -3.6 2.6) (end -3.6 -2.6) (layer F.CrtYd) (width 0.1))
+  (fp_line (start -1.2 -1.6) (end 1.2 -1.6) (layer F.SilkS) (width 0.1))
+  (fp_line (start -1.2 1.6) (end 1.2 1.6) (layer F.SilkS) (width 0.1))
+  (fp_line (start -2.1 -0.4) (end -2.1 0.4) (layer F.SilkS) (width 0.1))
+  (fp_line (start 2.1 -0.4) (end 2.1 0.4) (layer F.SilkS) (width 0.1))
+  (fp_line (start -3 -1) (end -3 -1) (layer F.SilkS) (width 0.1))
+  (fp_line (start -3 -1) (end -3 -1) (layer F.SilkS) (width 0.2))
+  (fp_line (start -3.2 -1) (end -3.2 -1) (layer F.SilkS) (width 0.2))
+  (fp_arc (start -3.1 -1) (end -3.000 -1) (angle -180) (layer F.SilkS) (width 0.2))
+  (fp_arc (start -3.1 -1) (end -3.200 -1) (angle -180) (layer F.SilkS) (width 0.2))
+  (pad 1 smd rect (at -2.075 -1.075 90) (size 0.650 1.050) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at 2.075 -1.075 90) (size 0.650 1.050) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -2.075 1.075 90) (size 0.650 1.050) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at 2.075 1.075 90) (size 0.650 1.050) (layers F.Cu F.Paste F.Mask))
+  (model SKRPABE010.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/SKRPABE010.lib

@@ -0,0 +1,29 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model SKRPABE010
+#/13010270/987070/2.49/4/0/Switch
+DEF SKRPABE010 S 0 30 Y Y 1 F N
+F0 "S" 950 300 50 H V L CNN
+F1 "SKRPABE010" 950 200 50 H V L CNN
+F2 "SKRPABE010" 950 100 50 H I L CNN
+F3 "https://datasheet.lcsc.com/szlcsc/ALPS-Electric-SKRPABE010_C115360.pdf" 950 0 50 H I L CNN
+F4 "Switch Tactile N.O. SPST Button J-Bend 0.05A 16VDC 1.57N SMD Automotive T/R" 950 -100 50 H I L CNN "Description"
+F5 "2.5" 950 -200 50 H I L CNN "Height"
+F6 "ALPS Electric" 950 -300 50 H I L CNN "Manufacturer_Name"
+F7 "SKRPABE010" 950 -400 50 H I L CNN "Manufacturer_Part_Number"
+F8 "688-SKRPAB" 950 -500 50 H I L CNN "Mouser Part Number"
+F9 "https://www.mouser.co.uk/ProductDetail/Alps-Alpine/SKRPABE010?qs=m0BA540hBPe1GpcSf%2FZ5Yw%3D%3D" 950 -600 50 H I L CNN "Mouser Price/Stock"
+F10 "" 950 -700 50 H I L CNN "Arrow Part Number"
+F11 "" 950 -800 50 H I L CNN "Arrow Price/Stock"
+F12 "" 950 -900 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 950 -1000 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X NO_1 1 0 0 200 R 50 50 0 0 P
+X NO_2 2 1100 0 200 L 50 50 0 0 P
+X NO_3 3 0 -100 200 R 50 50 0 0 P
+X NO_4 4 1100 -100 200 L 50 50 0 0 P
+P 5 0 1 6 200 100 900 100 900 -200 200 -200 200 100 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/WS2812B-2020.lib

@@ -0,0 +1,29 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model WS2812B-2020
+#/13449884/987070/2.49/4/4/LED (Multiple)
+DEF WS2812B-2020 LED 0 30 Y Y 1 F N
+F0 "LED" 850 300 50 H V L CNN
+F1 "WS2812B-2020" 850 200 50 H V L CNN
+F2 "WS2812B2020" 850 100 50 H I L CNN
+F3 "https://www.alldatasheet.com/datasheet-pdf/pdf/1134522/WORLDSEMI/WS2812B-2020.html" 850 0 50 H I L CNN
+F4 "LED; SMD; 2020; RGB; 2x2x0.84mm; 3.75.3V; Lens: transparent; 2kHz" 850 -100 50 H I L CNN "Description"
+F5 "0.84" 850 -200 50 H I L CNN "Height"
+F6 "Worldsemi" 850 -300 50 H I L CNN "Manufacturer_Name"
+F7 "WS2812B-2020" 850 -400 50 H I L CNN "Manufacturer_Part_Number"
+F8 "" 850 -500 50 H I L CNN "Mouser Part Number"
+F9 "" 850 -600 50 H I L CNN "Mouser Price/Stock"
+F10 "" 850 -700 50 H I L CNN "Arrow Part Number"
+F11 "" 850 -800 50 H I L CNN "Arrow Price/Stock"
+F12 "" 850 -900 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 850 -1000 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X DO 1 1000 -100 200 L 50 50 0 0 P
+X GND 2 1000 0 200 L 50 50 0 0 P
+X DI 3 0 0 200 R 50 50 0 0 P
+X VDD 4 0 -100 200 R 50 50 0 0 P
+P 5 0 1 6 200 100 800 100 800 -200 200 -200 200 100 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/WS2812B2020.kicad_mod

@@ -0,0 +1,35 @@
+(module "WS2812B2020" (layer F.Cu)
+  (descr "WS2812B-2020-2")
+  (tags "LED (Multiple)")
+  (attr smd)
+  (fp_text reference LED** (at 0.000 -0) (layer F.SilkS)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text user %R (at 0.000 -0) (layer F.Fab)
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_text value "WS2812B2020" (at 0.000 -0) (layer F.SilkS) hide
+    (effects (font (size 1.27 1.27) (thickness 0.254)))
+  )
+  (fp_line (start -1.1 -1) (end 1.1 -1) (layer F.Fab) (width 0.2))
+  (fp_line (start 1.1 -1) (end 1.1 1) (layer F.Fab) (width 0.2))
+  (fp_line (start 1.1 1) (end -1.1 1) (layer F.Fab) (width 0.2))
+  (fp_line (start -1.1 1) (end -1.1 -1) (layer F.Fab) (width 0.2))
+  (fp_line (start -2.265 -2) (end 2.265 -2) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 2.265 -2) (end 2.265 2) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 2.265 2) (end -2.265 2) (layer F.CrtYd) (width 0.1))
+  (fp_line (start -2.265 2) (end -2.265 -2) (layer F.CrtYd) (width 0.1))
+  (fp_line (start 1.4 1.4) (end 1.4 1.4) (layer F.SilkS) (width 0.1))
+  (fp_line (start 1.4 1.3) (end 1.4 1.3) (layer F.SilkS) (width 0.1))
+  (fp_arc (start 1.4 1.35) (end 1.400 1.4) (angle -180) (layer F.SilkS) (width 0.1))
+  (fp_arc (start 1.4 1.35) (end 1.400 1.3) (angle -180) (layer F.SilkS) (width 0.1))
+  (pad 1 smd rect (at 0.915 0.55 90) (size 0.700 0.700) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at 0.915 -0.55 90) (size 0.700 0.700) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -0.915 -0.55 90) (size 0.700 0.700) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at -0.915 0.55 90) (size 0.700 0.700) (layers F.Cu F.Paste F.Mask))
+  (model WS2812B-2020.stp
+    (at (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

PCBs/FlipperZero/WiFi-Devboard-Pro/Libraries/X6511WVS-08H-C60D48R2.lib

@@ -0,0 +1,33 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#SamacSys ECAD Model X6511WVS-08H-C60D48R2
+#/17126700/987070/2.49/8/0/Connector
+DEF X6511WVS-08H-C60D48R2 J 0 30 Y Y 1 F N
+F0 "J" 650 300 50 H V L CNN
+F1 "X6511WVS-08H-C60D48R2" 650 200 50 H V L CNN
+F2 "HUSRSP8W66P254_2000X250X850P" 650 100 50 H I L CNN
+F3 "https://datasheet.lcsc.com/lcsc/2110100430_XKB-Connectivity-X6511WVS-08H-C60D48R2_C2883765.pdf" 650 0 50 H I L CNN
+F4 "Gold 250V 3A Brick nogging Square Pins 2.5mm 260 6mm -40~ 105 1 8 2.54mm Black Brass 1x8P SMD,P=2.54mm() Pin Headers ROHS" 650 -100 50 H I L CNN "Description"
+F5 "" 650 -200 50 H I L CNN "Height"
+F6 "XKB Connectivity" 650 -300 50 H I L CNN "Manufacturer_Name"
+F7 "X6511WVS-08H-C60D48R2" 650 -400 50 H I L CNN "Manufacturer_Part_Number"
+F8 "" 650 -500 50 H I L CNN "Mouser Part Number"
+F9 "" 650 -600 50 H I L CNN "Mouser Price/Stock"
+F10 "" 650 -700 50 H I L CNN "Arrow Part Number"
+F11 "" 650 -800 50 H I L CNN "Arrow Price/Stock"
+F12 "" 650 -900 50 H I L CNN "Mouser Testing Part Number"
+F13 "" 650 -1000 50 H I L CNN "Mouser Testing Price/Stock"
+DRAW
+X 1 1 0 0 200 R 50 50 0 0 P
+X 2 2 0 -100 200 R 50 50 0 0 P
+X 3 3 0 -200 200 R 50 50 0 0 P
+X 4 4 0 -300 200 R 50 50 0 0 P
+X 5 5 800 0 200 L 50 50 0 0 P
+X 6 6 800 -100 200 L 50 50 0 0 P
+X 7 7 800 -200 200 L 50 50 0 0 P
+X 8 8 800 -300 200 L 50 50 0 0 P
+P 5 0 1 6 200 100 600 100 600 -400 200 -400 200 100 N
+ENDDRAW
+ENDDEF
+#
+#End Library

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-B_Mask.gbr

@@ -0,0 +1,76 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,(6.0.8)*%
+%TF.CreationDate,2023-01-02T13:08:22-05:00*%
+%TF.ProjectId,WiFi-Devboard-Pro,57694669-2d44-4657-9662-6f6172642d50,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Soldermask,Bot*%
+%TF.FilePolarity,Negative*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (6.0.8)) date 2023-01-02 13:08:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,1.700000*%
+%ADD11O,1.700000X1.700000*%
+%ADD12C,2.200000*%
+%ADD13R,0.960000X5.440000*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,J4*%
+X129370000Y-109940000D03*
+D11*
+X131910000Y-109940000D03*
+X134450000Y-109940000D03*
+X136990000Y-109940000D03*
+X139530000Y-109940000D03*
+X142070000Y-109940000D03*
+X144610000Y-109940000D03*
+X147150000Y-109940000D03*
+X149690000Y-109940000D03*
+X152230000Y-109940000D03*
+X154770000Y-109940000D03*
+%TD*%
+D12*
+%TO.C,*%
+X187100000Y-99900000D03*
+%TD*%
+D10*
+%TO.C,J5*%
+X129370000Y-89840000D03*
+D11*
+X131910000Y-89840000D03*
+X134450000Y-89840000D03*
+X136990000Y-89840000D03*
+X139530000Y-89840000D03*
+X142070000Y-89840000D03*
+X144610000Y-89840000D03*
+X147150000Y-89840000D03*
+X149690000Y-89840000D03*
+X152230000Y-89840000D03*
+X154770000Y-89840000D03*
+%TD*%
+D13*
+%TO.C,J3*%
+X153970000Y-103140000D03*
+X156510000Y-101060000D03*
+X159050000Y-103140000D03*
+X161590000Y-101060000D03*
+X164130000Y-103140000D03*
+X166670000Y-101060000D03*
+X169210000Y-103140000D03*
+X171750000Y-101060000D03*
+X174290000Y-103140000D03*
+X176830000Y-101060000D03*
+%TD*%
+%TO.C,J2*%
+X118410000Y-103140000D03*
+X120950000Y-101060000D03*
+X123490000Y-103140000D03*
+X126030000Y-101060000D03*
+X128570000Y-103140000D03*
+X131110000Y-101060000D03*
+X133650000Y-103140000D03*
+X136190000Y-101060000D03*
+%TD*%
+M02*

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-B_Paste.gbr

@@ -0,0 +1,39 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,(6.0.8)*%
+%TF.CreationDate,2023-01-02T13:08:22-05:00*%
+%TF.ProjectId,WiFi-Devboard-Pro,57694669-2d44-4657-9662-6f6172642d50,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Paste,Bot*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (6.0.8)) date 2023-01-02 13:08:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10R,0.960000X5.440000*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,J3*%
+X153970000Y-103140000D03*
+X156510000Y-101060000D03*
+X159050000Y-103140000D03*
+X161590000Y-101060000D03*
+X164130000Y-103140000D03*
+X166670000Y-101060000D03*
+X169210000Y-103140000D03*
+X171750000Y-101060000D03*
+X174290000Y-103140000D03*
+X176830000Y-101060000D03*
+%TD*%
+%TO.C,J2*%
+X118410000Y-103140000D03*
+X120950000Y-101060000D03*
+X123490000Y-103140000D03*
+X126030000Y-101060000D03*
+X128570000Y-103140000D03*
+X131110000Y-101060000D03*
+X133650000Y-103140000D03*
+X136190000Y-101060000D03*
+%TD*%
+M02*

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-B_Silkscreen.gbr

@@ -0,0 +1,647 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,(6.0.8)*%
+%TF.CreationDate,2023-01-02T13:08:22-05:00*%
+%TF.ProjectId,WiFi-Devboard-Pro,57694669-2d44-4657-9662-6f6172642d50,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Legend,Bot*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (6.0.8)) date 2023-01-02 13:08:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10C,0.100000*%
+%ADD11C,0.200000*%
+G04 APERTURE END LIST*
+D10*
+X183027857Y-91754857D02*
+X183294523Y-91754857D01*
+X183294523Y-92173904D02*
+X183294523Y-91373904D01*
+X182913571Y-91373904D01*
+X182494523Y-92173904D02*
+X182570714Y-92135809D01*
+X182608809Y-92059619D01*
+X182608809Y-91373904D01*
+X182189761Y-92173904D02*
+X182189761Y-91640571D01*
+X182189761Y-91373904D02*
+X182227857Y-91412000D01*
+X182189761Y-91450095D01*
+X182151666Y-91412000D01*
+X182189761Y-91373904D01*
+X182189761Y-91450095D01*
+X181808809Y-91640571D02*
+X181808809Y-92440571D01*
+X181808809Y-91678666D02*
+X181732619Y-91640571D01*
+X181580238Y-91640571D01*
+X181504047Y-91678666D01*
+X181465952Y-91716761D01*
+X181427857Y-91792952D01*
+X181427857Y-92021523D01*
+X181465952Y-92097714D01*
+X181504047Y-92135809D01*
+X181580238Y-92173904D01*
+X181732619Y-92173904D01*
+X181808809Y-92135809D01*
+X181085000Y-91640571D02*
+X181085000Y-92440571D01*
+X181085000Y-91678666D02*
+X181008809Y-91640571D01*
+X180856428Y-91640571D01*
+X180780238Y-91678666D01*
+X180742142Y-91716761D01*
+X180704047Y-91792952D01*
+X180704047Y-92021523D01*
+X180742142Y-92097714D01*
+X180780238Y-92135809D01*
+X180856428Y-92173904D01*
+X181008809Y-92173904D01*
+X181085000Y-92135809D01*
+X180056428Y-92135809D02*
+X180132619Y-92173904D01*
+X180285000Y-92173904D01*
+X180361190Y-92135809D01*
+X180399285Y-92059619D01*
+X180399285Y-91754857D01*
+X180361190Y-91678666D01*
+X180285000Y-91640571D01*
+X180132619Y-91640571D01*
+X180056428Y-91678666D01*
+X180018333Y-91754857D01*
+X180018333Y-91831047D01*
+X180399285Y-91907238D01*
+X179675476Y-92173904D02*
+X179675476Y-91640571D01*
+X179675476Y-91792952D02*
+X179637380Y-91716761D01*
+X179599285Y-91678666D01*
+X179523095Y-91640571D01*
+X179446904Y-91640571D01*
+X178646904Y-91373904D02*
+X178113571Y-91373904D01*
+X178646904Y-92173904D01*
+X178113571Y-92173904D01*
+X177504047Y-92135809D02*
+X177580238Y-92173904D01*
+X177732619Y-92173904D01*
+X177808809Y-92135809D01*
+X177846904Y-92059619D01*
+X177846904Y-91754857D01*
+X177808809Y-91678666D01*
+X177732619Y-91640571D01*
+X177580238Y-91640571D01*
+X177504047Y-91678666D01*
+X177465952Y-91754857D01*
+X177465952Y-91831047D01*
+X177846904Y-91907238D01*
+X177123095Y-92173904D02*
+X177123095Y-91640571D01*
+X177123095Y-91792952D02*
+X177085000Y-91716761D01*
+X177046904Y-91678666D01*
+X176970714Y-91640571D01*
+X176894523Y-91640571D01*
+X176513571Y-92173904D02*
+X176589761Y-92135809D01*
+X176627857Y-92097714D01*
+X176665952Y-92021523D01*
+X176665952Y-91792952D01*
+X176627857Y-91716761D01*
+X176589761Y-91678666D01*
+X176513571Y-91640571D01*
+X176399285Y-91640571D01*
+X176323095Y-91678666D01*
+X176285000Y-91716761D01*
+X176246904Y-91792952D01*
+X176246904Y-92021523D01*
+X176285000Y-92097714D01*
+X176323095Y-92135809D01*
+X176399285Y-92173904D01*
+X176513571Y-92173904D01*
+X175370714Y-91373904D02*
+X175180238Y-92173904D01*
+X175027857Y-91602476D01*
+X174875476Y-92173904D01*
+X174685000Y-91373904D01*
+X174380238Y-92173904D02*
+X174380238Y-91640571D01*
+X174380238Y-91373904D02*
+X174418333Y-91412000D01*
+X174380238Y-91450095D01*
+X174342142Y-91412000D01*
+X174380238Y-91373904D01*
+X174380238Y-91450095D01*
+X173732619Y-91754857D02*
+X173999285Y-91754857D01*
+X173999285Y-92173904D02*
+X173999285Y-91373904D01*
+X173618333Y-91373904D01*
+X173313571Y-92173904D02*
+X173313571Y-91640571D01*
+X173313571Y-91373904D02*
+X173351666Y-91412000D01*
+X173313571Y-91450095D01*
+X173275476Y-91412000D01*
+X173313571Y-91373904D01*
+X173313571Y-91450095D01*
+X172323095Y-92173904D02*
+X172323095Y-91373904D01*
+X172132619Y-91373904D01*
+X172018333Y-91412000D01*
+X171942142Y-91488190D01*
+X171904047Y-91564380D01*
+X171865952Y-91716761D01*
+X171865952Y-91831047D01*
+X171904047Y-91983428D01*
+X171942142Y-92059619D01*
+X172018333Y-92135809D01*
+X172132619Y-92173904D01*
+X172323095Y-92173904D01*
+X171218333Y-92135809D02*
+X171294523Y-92173904D01*
+X171446904Y-92173904D01*
+X171523095Y-92135809D01*
+X171561190Y-92059619D01*
+X171561190Y-91754857D01*
+X171523095Y-91678666D01*
+X171446904Y-91640571D01*
+X171294523Y-91640571D01*
+X171218333Y-91678666D01*
+X171180238Y-91754857D01*
+X171180238Y-91831047D01*
+X171561190Y-91907238D01*
+X170913571Y-91640571D02*
+X170723095Y-92173904D01*
+X170532619Y-91640571D01*
+X170227857Y-92173904D02*
+X170227857Y-91373904D01*
+X170227857Y-91678666D02*
+X170151666Y-91640571D01*
+X169999285Y-91640571D01*
+X169923095Y-91678666D01*
+X169885000Y-91716761D01*
+X169846904Y-91792952D01*
+X169846904Y-92021523D01*
+X169885000Y-92097714D01*
+X169923095Y-92135809D01*
+X169999285Y-92173904D01*
+X170151666Y-92173904D01*
+X170227857Y-92135809D01*
+X169389761Y-92173904D02*
+X169465952Y-92135809D01*
+X169504047Y-92097714D01*
+X169542142Y-92021523D01*
+X169542142Y-91792952D01*
+X169504047Y-91716761D01*
+X169465952Y-91678666D01*
+X169389761Y-91640571D01*
+X169275476Y-91640571D01*
+X169199285Y-91678666D01*
+X169161190Y-91716761D01*
+X169123095Y-91792952D01*
+X169123095Y-92021523D01*
+X169161190Y-92097714D01*
+X169199285Y-92135809D01*
+X169275476Y-92173904D01*
+X169389761Y-92173904D01*
+X168437380Y-92173904D02*
+X168437380Y-91754857D01*
+X168475476Y-91678666D01*
+X168551666Y-91640571D01*
+X168704047Y-91640571D01*
+X168780238Y-91678666D01*
+X168437380Y-92135809D02*
+X168513571Y-92173904D01*
+X168704047Y-92173904D01*
+X168780238Y-92135809D01*
+X168818333Y-92059619D01*
+X168818333Y-91983428D01*
+X168780238Y-91907238D01*
+X168704047Y-91869142D01*
+X168513571Y-91869142D01*
+X168437380Y-91831047D01*
+X168056428Y-92173904D02*
+X168056428Y-91640571D01*
+X168056428Y-91792952D02*
+X168018333Y-91716761D01*
+X167980238Y-91678666D01*
+X167904047Y-91640571D01*
+X167827857Y-91640571D01*
+X167218333Y-92173904D02*
+X167218333Y-91373904D01*
+X167218333Y-92135809D02*
+X167294523Y-92173904D01*
+X167446904Y-92173904D01*
+X167523095Y-92135809D01*
+X167561190Y-92097714D01*
+X167599285Y-92021523D01*
+X167599285Y-91792952D01*
+X167561190Y-91716761D01*
+X167523095Y-91678666D01*
+X167446904Y-91640571D01*
+X167294523Y-91640571D01*
+X167218333Y-91678666D01*
+X166227857Y-92173904D02*
+X166227857Y-91373904D01*
+X165923095Y-91373904D01*
+X165846904Y-91412000D01*
+X165808809Y-91450095D01*
+X165770714Y-91526285D01*
+X165770714Y-91640571D01*
+X165808809Y-91716761D01*
+X165846904Y-91754857D01*
+X165923095Y-91792952D01*
+X166227857Y-91792952D01*
+X165427857Y-92173904D02*
+X165427857Y-91640571D01*
+X165427857Y-91792952D02*
+X165389761Y-91716761D01*
+X165351666Y-91678666D01*
+X165275476Y-91640571D01*
+X165199285Y-91640571D01*
+X164818333Y-92173904D02*
+X164894523Y-92135809D01*
+X164932619Y-92097714D01*
+X164970714Y-92021523D01*
+X164970714Y-91792952D01*
+X164932619Y-91716761D01*
+X164894523Y-91678666D01*
+X164818333Y-91640571D01*
+X164704047Y-91640571D01*
+X164627857Y-91678666D01*
+X164589761Y-91716761D01*
+X164551666Y-91792952D01*
+X164551666Y-92021523D01*
+X164589761Y-92097714D01*
+X164627857Y-92135809D01*
+X164704047Y-92173904D01*
+X164818333Y-92173904D01*
+X182837380Y-93461904D02*
+X183104047Y-93080952D01*
+X183294523Y-93461904D02*
+X183294523Y-92661904D01*
+X182989761Y-92661904D01*
+X182913571Y-92700000D01*
+X182875476Y-92738095D01*
+X182837380Y-92814285D01*
+X182837380Y-92928571D01*
+X182875476Y-93004761D01*
+X182913571Y-93042857D01*
+X182989761Y-93080952D01*
+X183294523Y-93080952D01*
+X182189761Y-93423809D02*
+X182265952Y-93461904D01*
+X182418333Y-93461904D01*
+X182494523Y-93423809D01*
+X182532619Y-93347619D01*
+X182532619Y-93042857D01*
+X182494523Y-92966666D01*
+X182418333Y-92928571D01*
+X182265952Y-92928571D01*
+X182189761Y-92966666D01*
+X182151666Y-93042857D01*
+X182151666Y-93119047D01*
+X182532619Y-93195238D01*
+X181885000Y-92928571D02*
+X181694523Y-93461904D01*
+X181504047Y-92928571D01*
+X180704047Y-92661904D02*
+X180437380Y-93461904D01*
+X180170714Y-92661904D01*
+X179751666Y-92661904D02*
+X179675476Y-92661904D01*
+X179599285Y-92700000D01*
+X179561190Y-92738095D01*
+X179523095Y-92814285D01*
+X179485000Y-92966666D01*
+X179485000Y-93157142D01*
+X179523095Y-93309523D01*
+X179561190Y-93385714D01*
+X179599285Y-93423809D01*
+X179675476Y-93461904D01*
+X179751666Y-93461904D01*
+X179827857Y-93423809D01*
+X179865952Y-93385714D01*
+X179904047Y-93309523D01*
+X179942142Y-93157142D01*
+X179942142Y-92966666D01*
+X179904047Y-92814285D01*
+X179865952Y-92738095D01*
+X179827857Y-92700000D01*
+X179751666Y-92661904D01*
+X179142142Y-93385714D02*
+X179104047Y-93423809D01*
+X179142142Y-93461904D01*
+X179180238Y-93423809D01*
+X179142142Y-93385714D01*
+X179142142Y-93461904D01*
+X178342142Y-93461904D02*
+X178799285Y-93461904D01*
+X178570714Y-93461904D02*
+X178570714Y-92661904D01*
+X178646904Y-92776190D01*
+X178723095Y-92852380D01*
+X178799285Y-92890476D01*
+X177999285Y-93385714D02*
+X177961190Y-93423809D01*
+X177999285Y-93461904D01*
+X178037380Y-93423809D01*
+X177999285Y-93385714D01*
+X177999285Y-93461904D01*
+X177465952Y-92661904D02*
+X177389761Y-92661904D01*
+X177313571Y-92700000D01*
+X177275476Y-92738095D01*
+X177237380Y-92814285D01*
+X177199285Y-92966666D01*
+X177199285Y-93157142D01*
+X177237380Y-93309523D01*
+X177275476Y-93385714D01*
+X177313571Y-93423809D01*
+X177389761Y-93461904D01*
+X177465952Y-93461904D01*
+X177542142Y-93423809D01*
+X177580238Y-93385714D01*
+X177618333Y-93309523D01*
+X177656428Y-93157142D01*
+X177656428Y-92966666D01*
+X177618333Y-92814285D01*
+X177580238Y-92738095D01*
+X177542142Y-92700000D01*
+X177465952Y-92661904D01*
+X183065952Y-93949904D02*
+X183065952Y-94521333D01*
+X183104047Y-94635619D01*
+X183180238Y-94711809D01*
+X183294523Y-94749904D01*
+X183370714Y-94749904D01*
+X182342142Y-94216571D02*
+X182342142Y-94749904D01*
+X182685000Y-94216571D02*
+X182685000Y-94635619D01*
+X182646904Y-94711809D01*
+X182570714Y-94749904D01*
+X182456428Y-94749904D01*
+X182380238Y-94711809D01*
+X182342142Y-94673714D01*
+X181999285Y-94711809D02*
+X181923095Y-94749904D01*
+X181770714Y-94749904D01*
+X181694523Y-94711809D01*
+X181656428Y-94635619D01*
+X181656428Y-94597523D01*
+X181694523Y-94521333D01*
+X181770714Y-94483238D01*
+X181885000Y-94483238D01*
+X181961190Y-94445142D01*
+X181999285Y-94368952D01*
+X181999285Y-94330857D01*
+X181961190Y-94254666D01*
+X181885000Y-94216571D01*
+X181770714Y-94216571D01*
+X181694523Y-94254666D01*
+X181427857Y-94216571D02*
+X181123095Y-94216571D01*
+X181313571Y-93949904D02*
+X181313571Y-94635619D01*
+X181275476Y-94711809D01*
+X181199285Y-94749904D01*
+X181123095Y-94749904D01*
+X180399285Y-94673714D02*
+X180437380Y-94711809D01*
+X180551666Y-94749904D01*
+X180627857Y-94749904D01*
+X180742142Y-94711809D01*
+X180818333Y-94635619D01*
+X180856428Y-94559428D01*
+X180894523Y-94407047D01*
+X180894523Y-94292761D01*
+X180856428Y-94140380D01*
+X180818333Y-94064190D01*
+X180742142Y-93988000D01*
+X180627857Y-93949904D01*
+X180551666Y-93949904D01*
+X180437380Y-93988000D01*
+X180399285Y-94026095D01*
+X179713571Y-94749904D02*
+X179713571Y-94330857D01*
+X179751666Y-94254666D01*
+X179827857Y-94216571D01*
+X179980238Y-94216571D01*
+X180056428Y-94254666D01*
+X179713571Y-94711809D02*
+X179789761Y-94749904D01*
+X179980238Y-94749904D01*
+X180056428Y-94711809D01*
+X180094523Y-94635619D01*
+X180094523Y-94559428D01*
+X180056428Y-94483238D01*
+X179980238Y-94445142D01*
+X179789761Y-94445142D01*
+X179713571Y-94407047D01*
+X179218333Y-94749904D02*
+X179294523Y-94711809D01*
+X179332619Y-94635619D01*
+X179332619Y-93949904D01*
+X178799285Y-94749904D02*
+X178875476Y-94711809D01*
+X178913571Y-94635619D01*
+X178913571Y-93949904D01*
+X178494523Y-94749904D02*
+X178494523Y-93949904D01*
+X178227857Y-94521333D01*
+X177961190Y-93949904D01*
+X177961190Y-94749904D01*
+X177275476Y-94711809D02*
+X177351666Y-94749904D01*
+X177504047Y-94749904D01*
+X177580238Y-94711809D01*
+X177618333Y-94635619D01*
+X177618333Y-94330857D01*
+X177580238Y-94254666D01*
+X177504047Y-94216571D01*
+X177351666Y-94216571D01*
+X177275476Y-94254666D01*
+X177237380Y-94330857D01*
+X177237380Y-94407047D01*
+X177618333Y-94483238D01*
+X176894523Y-94749904D02*
+X176894523Y-93949904D01*
+X176437380Y-94749904D02*
+X176780238Y-94292761D01*
+X176437380Y-93949904D02*
+X176894523Y-94407047D01*
+X175980238Y-94749904D02*
+X176056428Y-94711809D01*
+X176094523Y-94673714D01*
+X176132619Y-94597523D01*
+X176132619Y-94368952D01*
+X176094523Y-94292761D01*
+X176056428Y-94254666D01*
+X175980238Y-94216571D01*
+X175865952Y-94216571D01*
+X175789761Y-94254666D01*
+X175751666Y-94292761D01*
+X175713571Y-94368952D01*
+X175713571Y-94597523D01*
+X175751666Y-94673714D01*
+X175789761Y-94711809D01*
+X175865952Y-94749904D01*
+X175980238Y-94749904D01*
+X175370714Y-94749904D02*
+X175370714Y-93949904D01*
+X175294523Y-94445142D02*
+X175065952Y-94749904D01*
+X175065952Y-94216571D02*
+X175370714Y-94521333D01*
+X174608809Y-94749904D02*
+X174685000Y-94711809D01*
+X174723095Y-94673714D01*
+X174761190Y-94597523D01*
+X174761190Y-94368952D01*
+X174723095Y-94292761D01*
+X174685000Y-94254666D01*
+X174608809Y-94216571D01*
+X174494523Y-94216571D01*
+X174418333Y-94254666D01*
+X174380238Y-94292761D01*
+X174342142Y-94368952D01*
+X174342142Y-94597523D01*
+X174380238Y-94673714D01*
+X174418333Y-94711809D01*
+X174494523Y-94749904D01*
+X174608809Y-94749904D01*
+X172742142Y-94749904D02*
+X172780238Y-94749904D01*
+X172856428Y-94711809D01*
+X172970714Y-94597523D01*
+X173161190Y-94368952D01*
+X173237380Y-94254666D01*
+X173275476Y-94140380D01*
+X173275476Y-94064190D01*
+X173237380Y-93988000D01*
+X173161190Y-93949904D01*
+X173123095Y-93949904D01*
+X173046904Y-93988000D01*
+X173008809Y-94064190D01*
+X173008809Y-94102285D01*
+X173046904Y-94178476D01*
+X173085000Y-94216571D01*
+X173313571Y-94368952D01*
+X173351666Y-94407047D01*
+X173389761Y-94483238D01*
+X173389761Y-94597523D01*
+X173351666Y-94673714D01*
+X173313571Y-94711809D01*
+X173237380Y-94749904D01*
+X173123095Y-94749904D01*
+X173046904Y-94711809D01*
+X173008809Y-94673714D01*
+X172894523Y-94521333D01*
+X172856428Y-94407047D01*
+X172856428Y-94330857D01*
+X171904047Y-94216571D02*
+X171599285Y-94216571D01*
+X171789761Y-93949904D02*
+X171789761Y-94635619D01*
+X171751666Y-94711809D01*
+X171675476Y-94749904D01*
+X171599285Y-94749904D01*
+X171332619Y-94749904D02*
+X171332619Y-94216571D01*
+X171332619Y-94368952D02*
+X171294523Y-94292761D01*
+X171256428Y-94254666D01*
+X171180238Y-94216571D01*
+X171104047Y-94216571D01*
+X170837380Y-94749904D02*
+X170837380Y-94216571D01*
+X170837380Y-93949904D02*
+X170875476Y-93988000D01*
+X170837380Y-94026095D01*
+X170799285Y-93988000D01*
+X170837380Y-93949904D01*
+X170837380Y-94026095D01*
+X170494523Y-94711809D02*
+X170418333Y-94749904D01*
+X170265952Y-94749904D01*
+X170189761Y-94711809D01*
+X170151666Y-94635619D01*
+X170151666Y-94597523D01*
+X170189761Y-94521333D01*
+X170265952Y-94483238D01*
+X170380238Y-94483238D01*
+X170456428Y-94445142D01*
+X170494523Y-94368952D01*
+X170494523Y-94330857D01*
+X170456428Y-94254666D01*
+X170380238Y-94216571D01*
+X170265952Y-94216571D01*
+X170189761Y-94254666D01*
+X169808809Y-94216571D02*
+X169808809Y-95016571D01*
+X169808809Y-94254666D02*
+X169732619Y-94216571D01*
+X169580238Y-94216571D01*
+X169504047Y-94254666D01*
+X169465952Y-94292761D01*
+X169427857Y-94368952D01*
+X169427857Y-94597523D01*
+X169465952Y-94673714D01*
+X169504047Y-94711809D01*
+X169580238Y-94749904D01*
+X169732619Y-94749904D01*
+X169808809Y-94711809D01*
+X169161190Y-93949904D02*
+X168665952Y-93949904D01*
+X168932619Y-94254666D01*
+X168818333Y-94254666D01*
+X168742142Y-94292761D01*
+X168704047Y-94330857D01*
+X168665952Y-94407047D01*
+X168665952Y-94597523D01*
+X168704047Y-94673714D01*
+X168742142Y-94711809D01*
+X168818333Y-94749904D01*
+X169046904Y-94749904D01*
+X169123095Y-94711809D01*
+X169161190Y-94673714D01*
+X167980238Y-94749904D02*
+X167980238Y-94330857D01*
+X168018333Y-94254666D01*
+X168094523Y-94216571D01*
+X168246904Y-94216571D01*
+X168323095Y-94254666D01*
+X167980238Y-94711809D02*
+X168056428Y-94749904D01*
+X168246904Y-94749904D01*
+X168323095Y-94711809D01*
+X168361190Y-94635619D01*
+X168361190Y-94559428D01*
+X168323095Y-94483238D01*
+X168246904Y-94445142D01*
+X168056428Y-94445142D01*
+X167980238Y-94407047D01*
+X167599285Y-94749904D02*
+X167599285Y-94216571D01*
+X167599285Y-94368952D02*
+X167561190Y-94292761D01*
+X167523095Y-94254666D01*
+X167446904Y-94216571D01*
+X167370714Y-94216571D01*
+D11*
+%TO.C,J3*%
+X177900000Y-100850000D02*
+X177900000Y-103350000D01*
+X152900000Y-100850000D02*
+X152900000Y-105860000D01*
+%TO.C,J2*%
+X137300000Y-100850000D02*
+X137300000Y-103350000D01*
+X117300000Y-100850000D02*
+X117300000Y-105860000D01*
+%TD*%
+M02*

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-Edge_Cuts.gbr

@@ -0,0 +1,65 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,(6.0.8)*%
+%TF.CreationDate,2023-01-02T13:08:22-05:00*%
+%TF.ProjectId,WiFi-Devboard-Pro,57694669-2d44-4657-9662-6f6172642d50,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Profile,NP*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (6.0.8)) date 2023-01-02 13:08:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%TA.AperFunction,Profile*%
+%ADD10C,0.100000*%
+%TD*%
+G04 APERTURE END LIST*
+D10*
+X111130000Y-108940000D02*
+G75*
+G03*
+X112130000Y-109940000I1000000J0D01*
+G01*
+X184090000Y-108940000D02*
+X184090000Y-102390000D01*
+X184090000Y-97390000D02*
+X184090000Y-90840000D01*
+X128365000Y-89840000D02*
+X112130000Y-89840000D01*
+X183090000Y-109940000D02*
+G75*
+G03*
+X184090000Y-108940000I0J1000000D01*
+G01*
+X183090000Y-89840000D02*
+X155765000Y-89840000D01*
+X128365000Y-109940000D02*
+X155765000Y-109940000D01*
+X112130000Y-89840000D02*
+G75*
+G03*
+X111130000Y-90840000I0J-1000000D01*
+G01*
+X111130000Y-90840000D02*
+X111130000Y-108940000D01*
+X187090000Y-102390000D02*
+G75*
+G03*
+X187090000Y-97390000I0J2500000D01*
+G01*
+X184090000Y-90840000D02*
+G75*
+G03*
+X183090000Y-89840000I-1000000J0D01*
+G01*
+X184090000Y-102390000D02*
+X187090000Y-102390000D01*
+X128385000Y-89840000D02*
+X155765000Y-89840000D01*
+X155765000Y-109940000D02*
+X183090000Y-109940000D01*
+X187090000Y-97390000D02*
+X184090000Y-97390000D01*
+X112130000Y-109940000D02*
+X128365000Y-109940000D01*
+M02*

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-F_Mask.gbr

@@ -0,0 +1,381 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,(6.0.8)*%
+%TF.CreationDate,2023-01-02T13:08:22-05:00*%
+%TF.ProjectId,WiFi-Devboard-Pro,57694669-2d44-4657-9662-6f6172642d50,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Soldermask,Top*%
+%TF.FilePolarity,Negative*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (6.0.8)) date 2023-01-02 13:08:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10R,0.600000X0.750000*%
+%ADD11R,0.750000X0.600000*%
+%ADD12R,0.600000X0.620000*%
+%ADD13R,0.650000X1.200000*%
+%ADD14C,1.700000*%
+%ADD15O,1.700000X1.700000*%
+%ADD16R,0.620000X0.600000*%
+%ADD17R,0.690000X0.720000*%
+%ADD18R,1.100000X0.700000*%
+%ADD19R,0.930000X0.900000*%
+%ADD20R,0.780000X1.050000*%
+%ADD21R,3.330000X0.700000*%
+%ADD22R,2.800000X0.860000*%
+%ADD23R,1.830000X1.140000*%
+%ADD24R,0.700000X0.700000*%
+%ADD25R,0.720000X0.690000*%
+%ADD26R,0.900000X1.500000*%
+%ADD27R,1.500000X0.900000*%
+%ADD28R,0.900000X0.900000*%
+%ADD29R,0.500000X0.900000*%
+%ADD30R,0.650000X2.770000*%
+%ADD31R,0.950000X0.800000*%
+%ADD32R,1.050000X0.650000*%
+%ADD33R,1.850000X0.900000*%
+%ADD34R,1.850000X3.200000*%
+%ADD35C,2.200000*%
+%ADD36R,0.400000X1.000000*%
+%ADD37R,0.620000X0.640000*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,R10*%
+X134960000Y-97140000D03*
+X134960000Y-96040000D03*
+%TD*%
+D11*
+%TO.C,R15*%
+X126500000Y-96950000D03*
+X127600000Y-96950000D03*
+%TD*%
+%TO.C,R6*%
+X150660000Y-104890000D03*
+X149560000Y-104890000D03*
+%TD*%
+D12*
+%TO.C,C7*%
+X117000000Y-92270000D03*
+X116080000Y-92270000D03*
+%TD*%
+D10*
+%TO.C,R5*%
+X115300000Y-91350000D03*
+X115300000Y-92450000D03*
+%TD*%
+D13*
+%TO.C,IC2*%
+X128460000Y-92600000D03*
+X126540000Y-92600000D03*
+X127500000Y-94700000D03*
+%TD*%
+%TO.C,IC4*%
+X138210000Y-102375000D03*
+X136290000Y-102375000D03*
+X137250000Y-104475000D03*
+%TD*%
+D14*
+%TO.C,J4*%
+X129370000Y-109940000D03*
+D15*
+X131910000Y-109940000D03*
+X134450000Y-109940000D03*
+X136990000Y-109940000D03*
+X139530000Y-109940000D03*
+X142070000Y-109940000D03*
+X144610000Y-109940000D03*
+X147150000Y-109940000D03*
+X149690000Y-109940000D03*
+X152230000Y-109940000D03*
+X154770000Y-109940000D03*
+%TD*%
+D16*
+%TO.C,C11*%
+X136225000Y-97060000D03*
+X136225000Y-96140000D03*
+%TD*%
+D17*
+%TO.C,C2*%
+X181985000Y-90350000D03*
+X181065000Y-90350000D03*
+%TD*%
+D18*
+%TO.C,J6*%
+X112460000Y-102230000D03*
+X112460000Y-101130000D03*
+X112460000Y-100030000D03*
+X112460000Y-98930000D03*
+X112460000Y-97830000D03*
+X112460000Y-96730000D03*
+X112460000Y-95630000D03*
+X112460000Y-94530000D03*
+D19*
+X124925000Y-104020000D03*
+D20*
+X125000000Y-99755000D03*
+D21*
+X123725000Y-93370000D03*
+D22*
+X112960000Y-93450000D03*
+D23*
+X112475000Y-106110000D03*
+D21*
+X123725000Y-106330000D03*
+%TD*%
+D24*
+%TO.C,LED1*%
+X155950000Y-98885000D03*
+X154850000Y-98885000D03*
+X154850000Y-100715000D03*
+X155950000Y-100715000D03*
+%TD*%
+D10*
+%TO.C,R4*%
+X117820000Y-91350000D03*
+X117820000Y-92450000D03*
+%TD*%
+D25*
+%TO.C,C6*%
+X133100000Y-99040000D03*
+X133100000Y-99960000D03*
+%TD*%
+D26*
+%TO.C,IC1*%
+X176560000Y-91100000D03*
+X175290000Y-91100000D03*
+X174020000Y-91100000D03*
+X172750000Y-91100000D03*
+X171480000Y-91100000D03*
+X170210000Y-91100000D03*
+X168940000Y-91100000D03*
+X167670000Y-91100000D03*
+X166400000Y-91100000D03*
+X165130000Y-91100000D03*
+X163860000Y-91100000D03*
+X162590000Y-91100000D03*
+X161320000Y-91100000D03*
+X160050000Y-91100000D03*
+D27*
+X158800000Y-94135000D03*
+X158800000Y-95405000D03*
+X158800000Y-96675000D03*
+X158800000Y-97945000D03*
+X158800000Y-99215000D03*
+X158800000Y-100485000D03*
+X158800000Y-101755000D03*
+X158800000Y-103025000D03*
+X158800000Y-104295000D03*
+X158800000Y-105565000D03*
+D26*
+X160050000Y-108600000D03*
+X161320000Y-108600000D03*
+X162590000Y-108600000D03*
+X163860000Y-108600000D03*
+X165130000Y-108600000D03*
+X166400000Y-108600000D03*
+X167670000Y-108600000D03*
+X168940000Y-108600000D03*
+X170210000Y-108600000D03*
+X171480000Y-108600000D03*
+X172750000Y-108600000D03*
+X174020000Y-108600000D03*
+X175290000Y-108600000D03*
+X176560000Y-108600000D03*
+D28*
+X170240000Y-96950000D03*
+X168840000Y-96950000D03*
+X167440000Y-96950000D03*
+X167440000Y-98350000D03*
+X167440000Y-99750000D03*
+X168840000Y-99750000D03*
+X170240000Y-99750000D03*
+X170240000Y-98350000D03*
+X168840000Y-98350000D03*
+%TD*%
+D29*
+%TO.C,LED4*%
+X127200000Y-99100000D03*
+X128500000Y-99100000D03*
+%TD*%
+D11*
+%TO.C,R2*%
+X155950000Y-97430000D03*
+X154850000Y-97430000D03*
+%TD*%
+D30*
+%TO.C,J1*%
+X143860000Y-101665000D03*
+X143860000Y-98135000D03*
+X145130000Y-101665000D03*
+X145130000Y-98135000D03*
+X146400000Y-101665000D03*
+X146400000Y-98135000D03*
+X147670000Y-101665000D03*
+X147670000Y-98135000D03*
+X148940000Y-101665000D03*
+X148940000Y-98135000D03*
+%TD*%
+D25*
+%TO.C,C5*%
+X126100000Y-101790000D03*
+X126100000Y-102710000D03*
+%TD*%
+D13*
+%TO.C,IC5*%
+X141060000Y-105000000D03*
+X139140000Y-105000000D03*
+X140100000Y-107100000D03*
+%TD*%
+D31*
+%TO.C,LED2*%
+X142800000Y-93050000D03*
+X142800000Y-94650000D03*
+%TD*%
+D32*
+%TO.C,S2*%
+X152075000Y-104875000D03*
+X156225000Y-104875000D03*
+X152075000Y-107025000D03*
+X156225000Y-107025000D03*
+%TD*%
+D12*
+%TO.C,C4*%
+X154930000Y-102150000D03*
+X155850000Y-102150000D03*
+%TD*%
+D33*
+%TO.C,IC3*%
+X134200000Y-106700000D03*
+X134200000Y-104400000D03*
+X134200000Y-102100000D03*
+D34*
+X128000000Y-104400000D03*
+%TD*%
+D12*
+%TO.C,C3*%
+X179065000Y-90300000D03*
+X179985000Y-90300000D03*
+%TD*%
+D35*
+%TO.C,*%
+X187100000Y-99900000D03*
+%TD*%
+D16*
+%TO.C,C8*%
+X129290000Y-97080000D03*
+X129290000Y-96160000D03*
+%TD*%
+D36*
+%TO.C,U3*%
+X138250000Y-92600000D03*
+X137600000Y-92600000D03*
+X136950000Y-92600000D03*
+X136950000Y-94600000D03*
+X137600000Y-94600000D03*
+X138250000Y-94600000D03*
+%TD*%
+D32*
+%TO.C,S1*%
+X152075000Y-92725000D03*
+X156225000Y-92725000D03*
+X152075000Y-94875000D03*
+X156225000Y-94875000D03*
+%TD*%
+D11*
+%TO.C,R1*%
+X149700000Y-93800000D03*
+X150800000Y-93800000D03*
+%TD*%
+D16*
+%TO.C,C9*%
+X134420000Y-99050000D03*
+X134420000Y-99970000D03*
+%TD*%
+D10*
+%TO.C,R8*%
+X131610000Y-97150000D03*
+X131610000Y-96050000D03*
+%TD*%
+D14*
+%TO.C,J5*%
+X129370000Y-89840000D03*
+D15*
+X131910000Y-89840000D03*
+X134450000Y-89840000D03*
+X136990000Y-89840000D03*
+X139530000Y-89840000D03*
+X142070000Y-89840000D03*
+X144610000Y-89840000D03*
+X147150000Y-89840000D03*
+X149690000Y-89840000D03*
+X152230000Y-89840000D03*
+X154770000Y-89840000D03*
+%TD*%
+D10*
+%TO.C,R12*%
+X138400000Y-97150000D03*
+X138400000Y-96050000D03*
+%TD*%
+D37*
+%TO.C,C1*%
+X150690000Y-94690000D03*
+X149770000Y-94690000D03*
+%TD*%
+D10*
+%TO.C,R11*%
+X137200000Y-97150000D03*
+X137200000Y-96050000D03*
+%TD*%
+D16*
+%TO.C,C10*%
+X133000000Y-97085000D03*
+X133000000Y-96165000D03*
+%TD*%
+D10*
+%TO.C,R13*%
+X144350000Y-93300000D03*
+X144350000Y-94400000D03*
+%TD*%
+%TO.C,R14*%
+X147400000Y-93250000D03*
+X147400000Y-94350000D03*
+%TD*%
+D36*
+%TO.C,U2*%
+X134800000Y-92600000D03*
+X134150000Y-92600000D03*
+X133500000Y-92600000D03*
+X133500000Y-94600000D03*
+X134150000Y-94600000D03*
+X134800000Y-94600000D03*
+%TD*%
+D10*
+%TO.C,R9*%
+X133790000Y-97140000D03*
+X133790000Y-96040000D03*
+%TD*%
+D36*
+%TO.C,U1*%
+X131450000Y-92610000D03*
+X130800000Y-92610000D03*
+X130150000Y-92610000D03*
+X130150000Y-94610000D03*
+X130800000Y-94610000D03*
+X131450000Y-94610000D03*
+%TD*%
+D10*
+%TO.C,R3*%
+X119900000Y-91360000D03*
+X119900000Y-92460000D03*
+%TD*%
+%TO.C,R7*%
+X130410000Y-97160000D03*
+X130410000Y-96060000D03*
+%TD*%
+D31*
+%TO.C,LED3*%
+X145900000Y-93050000D03*
+X145900000Y-94650000D03*
+%TD*%
+M02*

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-F_Paste.gbr

@@ -0,0 +1,343 @@
+%TF.GenerationSoftware,KiCad,Pcbnew,(6.0.8)*%
+%TF.CreationDate,2023-01-02T13:08:22-05:00*%
+%TF.ProjectId,WiFi-Devboard-Pro,57694669-2d44-4657-9662-6f6172642d50,rev?*%
+%TF.SameCoordinates,Original*%
+%TF.FileFunction,Paste,Top*%
+%TF.FilePolarity,Positive*%
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW (6.0.8)) date 2023-01-02 13:08:22*
+%MOMM*%
+%LPD*%
+G01*
+G04 APERTURE LIST*
+%ADD10R,0.600000X0.750000*%
+%ADD11R,0.750000X0.600000*%
+%ADD12R,0.600000X0.620000*%
+%ADD13R,0.650000X1.200000*%
+%ADD14R,0.620000X0.600000*%
+%ADD15R,0.690000X0.720000*%
+%ADD16R,1.100000X0.700000*%
+%ADD17R,0.930000X0.900000*%
+%ADD18R,0.780000X1.050000*%
+%ADD19R,3.330000X0.700000*%
+%ADD20R,2.800000X0.860000*%
+%ADD21R,1.830000X1.140000*%
+%ADD22R,0.700000X0.700000*%
+%ADD23R,0.720000X0.690000*%
+%ADD24R,0.900000X1.500000*%
+%ADD25R,1.500000X0.900000*%
+%ADD26R,0.900000X0.900000*%
+%ADD27R,0.500000X0.900000*%
+%ADD28R,0.650000X2.770000*%
+%ADD29R,0.950000X0.800000*%
+%ADD30R,1.050000X0.650000*%
+%ADD31R,1.850000X0.900000*%
+%ADD32R,1.850000X3.200000*%
+%ADD33R,0.400000X1.000000*%
+%ADD34R,0.620000X0.640000*%
+G04 APERTURE END LIST*
+D10*
+%TO.C,R10*%
+X134960000Y-97140000D03*
+X134960000Y-96040000D03*
+%TD*%
+D11*
+%TO.C,R15*%
+X126500000Y-96950000D03*
+X127600000Y-96950000D03*
+%TD*%
+%TO.C,R6*%
+X150660000Y-104890000D03*
+X149560000Y-104890000D03*
+%TD*%
+D12*
+%TO.C,C7*%
+X117000000Y-92270000D03*
+X116080000Y-92270000D03*
+%TD*%
+D10*
+%TO.C,R5*%
+X115300000Y-91350000D03*
+X115300000Y-92450000D03*
+%TD*%
+D13*
+%TO.C,IC2*%
+X128460000Y-92600000D03*
+X126540000Y-92600000D03*
+X127500000Y-94700000D03*
+%TD*%
+%TO.C,IC4*%
+X138210000Y-102375000D03*
+X136290000Y-102375000D03*
+X137250000Y-104475000D03*
+%TD*%
+D14*
+%TO.C,C11*%
+X136225000Y-97060000D03*
+X136225000Y-96140000D03*
+%TD*%
+D15*
+%TO.C,C2*%
+X181985000Y-90350000D03*
+X181065000Y-90350000D03*
+%TD*%
+D16*
+%TO.C,J6*%
+X112460000Y-102230000D03*
+X112460000Y-101130000D03*
+X112460000Y-100030000D03*
+X112460000Y-98930000D03*
+X112460000Y-97830000D03*
+X112460000Y-96730000D03*
+X112460000Y-95630000D03*
+X112460000Y-94530000D03*
+D17*
+X124925000Y-104020000D03*
+D18*
+X125000000Y-99755000D03*
+D19*
+X123725000Y-93370000D03*
+D20*
+X112960000Y-93450000D03*
+D21*
+X112475000Y-106110000D03*
+D19*
+X123725000Y-106330000D03*
+%TD*%
+D22*
+%TO.C,LED1*%
+X155950000Y-98885000D03*
+X154850000Y-98885000D03*
+X154850000Y-100715000D03*
+X155950000Y-100715000D03*
+%TD*%
+D10*
+%TO.C,R4*%
+X117820000Y-91350000D03*
+X117820000Y-92450000D03*
+%TD*%
+D23*
+%TO.C,C6*%
+X133100000Y-99040000D03*
+X133100000Y-99960000D03*
+%TD*%
+D24*
+%TO.C,IC1*%
+X176560000Y-91100000D03*
+X175290000Y-91100000D03*
+X174020000Y-91100000D03*
+X172750000Y-91100000D03*
+X171480000Y-91100000D03*
+X170210000Y-91100000D03*
+X168940000Y-91100000D03*
+X167670000Y-91100000D03*
+X166400000Y-91100000D03*
+X165130000Y-91100000D03*
+X163860000Y-91100000D03*
+X162590000Y-91100000D03*
+X161320000Y-91100000D03*
+X160050000Y-91100000D03*
+D25*
+X158800000Y-94135000D03*
+X158800000Y-95405000D03*
+X158800000Y-96675000D03*
+X158800000Y-97945000D03*
+X158800000Y-99215000D03*
+X158800000Y-100485000D03*
+X158800000Y-101755000D03*
+X158800000Y-103025000D03*
+X158800000Y-104295000D03*
+X158800000Y-105565000D03*
+D24*
+X160050000Y-108600000D03*
+X161320000Y-108600000D03*
+X162590000Y-108600000D03*
+X163860000Y-108600000D03*
+X165130000Y-108600000D03*
+X166400000Y-108600000D03*
+X167670000Y-108600000D03*
+X168940000Y-108600000D03*
+X170210000Y-108600000D03*
+X171480000Y-108600000D03*
+X172750000Y-108600000D03*
+X174020000Y-108600000D03*
+X175290000Y-108600000D03*
+X176560000Y-108600000D03*
+D26*
+X170240000Y-96950000D03*
+X168840000Y-96950000D03*
+X167440000Y-96950000D03*
+X167440000Y-98350000D03*
+X167440000Y-99750000D03*
+X168840000Y-99750000D03*
+X170240000Y-99750000D03*
+X170240000Y-98350000D03*
+X168840000Y-98350000D03*
+%TD*%
+D27*
+%TO.C,LED4*%
+X127200000Y-99100000D03*
+X128500000Y-99100000D03*
+%TD*%
+D11*
+%TO.C,R2*%
+X155950000Y-97430000D03*
+X154850000Y-97430000D03*
+%TD*%
+D28*
+%TO.C,J1*%
+X143860000Y-101665000D03*
+X143860000Y-98135000D03*
+X145130000Y-101665000D03*
+X145130000Y-98135000D03*
+X146400000Y-101665000D03*
+X146400000Y-98135000D03*
+X147670000Y-101665000D03*
+X147670000Y-98135000D03*
+X148940000Y-101665000D03*
+X148940000Y-98135000D03*
+%TD*%
+D23*
+%TO.C,C5*%
+X126100000Y-101790000D03*
+X126100000Y-102710000D03*
+%TD*%
+D13*
+%TO.C,IC5*%
+X141060000Y-105000000D03*
+X139140000Y-105000000D03*
+X140100000Y-107100000D03*
+%TD*%
+D29*
+%TO.C,LED2*%
+X142800000Y-93050000D03*
+X142800000Y-94650000D03*
+%TD*%
+D30*
+%TO.C,S2*%
+X152075000Y-104875000D03*
+X156225000Y-104875000D03*
+X152075000Y-107025000D03*
+X156225000Y-107025000D03*
+%TD*%
+D12*
+%TO.C,C4*%
+X154930000Y-102150000D03*
+X155850000Y-102150000D03*
+%TD*%
+D31*
+%TO.C,IC3*%
+X134200000Y-106700000D03*
+X134200000Y-104400000D03*
+X134200000Y-102100000D03*
+D32*
+X128000000Y-104400000D03*
+%TD*%
+D12*
+%TO.C,C3*%
+X179065000Y-90300000D03*
+X179985000Y-90300000D03*
+%TD*%
+D14*
+%TO.C,C8*%
+X129290000Y-97080000D03*
+X129290000Y-96160000D03*
+%TD*%
+D33*
+%TO.C,U3*%
+X138250000Y-92600000D03*
+X137600000Y-92600000D03*
+X136950000Y-92600000D03*
+X136950000Y-94600000D03*
+X137600000Y-94600000D03*
+X138250000Y-94600000D03*
+%TD*%
+D30*
+%TO.C,S1*%
+X152075000Y-92725000D03*
+X156225000Y-92725000D03*
+X152075000Y-94875000D03*
+X156225000Y-94875000D03*
+%TD*%
+D11*
+%TO.C,R1*%
+X149700000Y-93800000D03*
+X150800000Y-93800000D03*
+%TD*%
+D14*
+%TO.C,C9*%
+X134420000Y-99050000D03*
+X134420000Y-99970000D03*
+%TD*%
+D10*
+%TO.C,R8*%
+X131610000Y-97150000D03*
+X131610000Y-96050000D03*
+%TD*%
+%TO.C,R12*%
+X138400000Y-97150000D03*
+X138400000Y-96050000D03*
+%TD*%
+D34*
+%TO.C,C1*%
+X150690000Y-94690000D03*
+X149770000Y-94690000D03*
+%TD*%
+D10*
+%TO.C,R11*%
+X137200000Y-97150000D03*
+X137200000Y-96050000D03*
+%TD*%
+D14*
+%TO.C,C10*%
+X133000000Y-97085000D03*
+X133000000Y-96165000D03*
+%TD*%
+D10*
+%TO.C,R13*%
+X144350000Y-93300000D03*
+X144350000Y-94400000D03*
+%TD*%
+%TO.C,R14*%
+X147400000Y-93250000D03*
+X147400000Y-94350000D03*
+%TD*%
+D33*
+%TO.C,U2*%
+X134800000Y-92600000D03*
+X134150000Y-92600000D03*
+X133500000Y-92600000D03*
+X133500000Y-94600000D03*
+X134150000Y-94600000D03*
+X134800000Y-94600000D03*
+%TD*%
+D10*
+%TO.C,R9*%
+X133790000Y-97140000D03*
+X133790000Y-96040000D03*
+%TD*%
+D33*
+%TO.C,U1*%
+X131450000Y-92610000D03*
+X130800000Y-92610000D03*
+X130150000Y-92610000D03*
+X130150000Y-94610000D03*
+X130800000Y-94610000D03*
+X131450000Y-94610000D03*
+%TD*%
+D10*
+%TO.C,R3*%
+X119900000Y-91360000D03*
+X119900000Y-92460000D03*
+%TD*%
+%TO.C,R7*%
+X130410000Y-97160000D03*
+X130410000Y-96060000D03*
+%TD*%
+D29*
+%TO.C,LED3*%
+X145900000Y-93050000D03*
+X145900000Y-94650000D03*
+%TD*%
+M02*

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-NPTH.drl

@@ -0,0 +1,17 @@
+M48
+; DRILL file {KiCad (6.0.8)} date Mon Jan  2 13:07:49 2023
+; FORMAT={-:-/ absolute / inch / decimal}
+; #@! TF.CreationDate,2023-01-02T13:07:49-05:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,(6.0.8)
+; #@! TF.FileFunction,NonPlated,1,2,NPTH
+FMAT,2
+INCH
+; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
+T1C0.0866
+%
+G90
+G05
+T1
+X7.3661Y-3.9331
+T0
+M30

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-PTH.drl

@@ -0,0 +1,111 @@
+M48
+; DRILL file {KiCad (6.0.8)} date Mon Jan  2 13:07:49 2023
+; FORMAT={-:-/ absolute / inch / decimal}
+; #@! TF.CreationDate,2023-01-02T13:07:49-05:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,(6.0.8)
+; #@! TF.FileFunction,Plated,1,2,PTH
+FMAT,2
+INCH
+; #@! TA.AperFunction,Plated,PTH,ViaDrill
+T1C0.0118
+; #@! TA.AperFunction,Plated,PTH,ComponentDrill
+T2C0.0394
+%
+G90
+G05
+T1
+X4.4614Y-3.765
+X4.5118Y-3.5965
+X4.5709Y-3.6008
+X4.6618Y-3.9384
+X4.6626Y-3.5972
+X4.7831Y-3.5969
+X4.8949Y-4.1358
+X4.9528Y-3.8169
+X4.9618Y-4.1575
+X5.0913Y-3.6457
+X5.1081Y-3.7541
+X5.1299Y-4.1307
+X5.154Y-4.2442
+X5.1965Y-3.7252
+X5.2102Y-3.6665
+X5.3067Y-3.6839
+X5.3091Y-3.9748
+X5.3248Y-3.9185
+X5.348Y-3.8756
+X5.3622Y-3.7333
+X5.3986Y-3.9892
+X5.4307Y-3.889
+X5.5819Y-4.0693
+X5.5823Y-4.1481
+X5.6075Y-3.8177
+X5.6398Y-4.0679
+X5.6827Y-3.6469
+X5.7224Y-3.7945
+X5.8028Y-3.6441
+X5.8382Y-3.7945
+X5.8528Y-4.1295
+X5.8933Y-3.8638
+X5.9689Y-3.6858
+X6.0043Y-3.6831
+X6.0236Y-3.5787
+X6.0335Y-3.9311
+X6.1004Y-4.0598
+X6.1528Y-3.6961
+X6.187Y-3.8358
+X6.2461Y-4.2352
+X6.2984Y-3.8134
+X6.2984Y-4.0606
+X6.3012Y-3.7535
+X6.3236Y-4.1185
+X6.3248Y-3.7756
+X6.3492Y-3.7091
+X6.3514Y-4.2116
+X6.3516Y-3.6752
+X6.4012Y-3.6277
+X6.4508Y-4.2323
+X6.4512Y-3.6277
+X6.5004Y-4.2106
+X6.5012Y-3.6277
+X6.5512Y-3.6277
+X6.5512Y-4.2323
+X6.6012Y-3.6277
+X6.6014Y-4.2323
+X6.6276Y-4.1134
+X6.6512Y-3.6277
+X6.7008Y-4.2323
+X6.7012Y-3.6277
+X6.7512Y-4.2276
+X6.802Y-4.2268
+X6.8512Y-3.6362
+X6.8512Y-4.2295
+X6.9012Y-4.2303
+X6.9181Y-3.9774
+X6.9882Y-3.5827
+X7.0197Y-3.5551
+X7.1283Y-3.5831
+T2
+X5.0933Y-3.537
+X5.0933Y-4.3283
+X5.1933Y-3.537
+X5.1933Y-4.3283
+X5.2933Y-3.537
+X5.2933Y-4.3283
+X5.3933Y-3.537
+X5.3933Y-4.3283
+X5.4933Y-3.537
+X5.4933Y-4.3283
+X5.5933Y-3.537
+X5.5933Y-4.3283
+X5.6933Y-3.537
+X5.6933Y-4.3283
+X5.7933Y-3.537
+X5.7933Y-4.3283
+X5.8933Y-3.537
+X5.8933Y-4.3283
+X5.9933Y-3.537
+X5.9933Y-4.3283
+X6.0933Y-3.537
+X6.0933Y-4.3283
+T0
+M30

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/Gerber and Drill/WiFi-Devboard-Pro-job.gbrjob

@@ -0,0 +1,127 @@
+{
+  "Header": {
+    "GenerationSoftware": {
+      "Vendor": "KiCad",
+      "Application": "Pcbnew",
+      "Version": "(6.0.8)"
+    },
+    "CreationDate": "2023-01-02T13:08:22-05:00"
+  },
+  "GeneralSpecs": {
+    "ProjectId": {
+      "Name": "WiFi-Devboard-Pro",
+      "GUID": "57694669-2d44-4657-9662-6f6172642d50",
+      "Revision": "rev?"
+    },
+    "Size": {
+      "X": 78.56,
+      "Y": 20.2
+    },
+    "LayerNumber": 2,
+    "BoardThickness": 1.6,
+    "Finish": "None"
+  },
+  "DesignRules": [
+    {
+      "Layers": "Outer",
+      "PadToPad": 0.127,
+      "PadToTrack": 0.127,
+      "TrackToTrack": 0.127,
+      "MinLineWidth": 0.127,
+      "TrackToRegion": 0.127,
+      "RegionToRegion": 0.127
+    }
+  ],
+  "FilesAttributes": [
+    {
+      "Path": "WiFi-Devboard-Pro-F_Cu.gbr",
+      "FileFunction": "Copper,L1,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-B_Cu.gbr",
+      "FileFunction": "Copper,L2,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-F_Paste.gbr",
+      "FileFunction": "SolderPaste,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-B_Paste.gbr",
+      "FileFunction": "SolderPaste,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-F_Silkscreen.gbr",
+      "FileFunction": "Legend,Top",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-B_Silkscreen.gbr",
+      "FileFunction": "Legend,Bot",
+      "FilePolarity": "Positive"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-F_Mask.gbr",
+      "FileFunction": "SolderMask,Top",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-B_Mask.gbr",
+      "FileFunction": "SolderMask,Bot",
+      "FilePolarity": "Negative"
+    },
+    {
+      "Path": "WiFi-Devboard-Pro-Edge_Cuts.gbr",
+      "FileFunction": "Profile",
+      "FilePolarity": "Positive"
+    }
+  ],
+  "MaterialStackup": [
+    {
+      "Type": "Legend",
+      "Name": "Top Silk Screen"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Top Solder Paste"
+    },
+    {
+      "Type": "SolderMask",
+      "Thickness": 0.01,
+      "Name": "Top Solder Mask"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "F.Cu"
+    },
+    {
+      "Type": "Dielectric",
+      "Thickness": 1.51,
+      "Material": "FR4",
+      "Name": "F.Cu/B.Cu",
+      "Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)"
+    },
+    {
+      "Type": "Copper",
+      "Thickness": 0.035,
+      "Name": "B.Cu"
+    },
+    {
+      "Type": "SolderMask",
+      "Thickness": 0.01,
+      "Name": "Bottom Solder Mask"
+    },
+    {
+      "Type": "SolderPaste",
+      "Name": "Bottom Solder Paste"
+    },
+    {
+      "Type": "Legend",
+      "Name": "Bottom Silk Screen"
+    }
+  ]
+}

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/WiFi-Devboard-Pro-BOM.csv

@@ -0,0 +1,25 @@
+Comment,Designator,Footprint,LCSC
+"1u","C1","0402",""
+"22uF","C2,C5","0402",""
+"100n","C3,C7,C8,C9,C10,C11","0402",""
+"100nF","C4","0402",""
+"10uF","C6","0402",""
+"MountingHole","H1","",""
+"ESP32-WROOM-32E-N4","IC1","SMD-38P,18x25.5x3.1mm",""
+"SI2333CDS-T1-E3","IC2,IC4,IC5","SOT-23",""
+"AZ1117H-3.3TRE1","IC3","SOT-223-3",""
+"3220-10-0300-00","J1","322010030000",""
+"X6511WVS-08H-C60D48R1","J2","SMD,P=2.54mm(交错脚)",""
+"X6511WVS-10H-C60D48R1","J3","HUSRSP10W66P254_2500X250X850P",""
+"Conn_01x11","J4,J5","SMD,P=2.54mm(交错脚)",""
+"503398-1892","J6","SMD",""
+"WS2812B-2020","LED1","WS2812B2020",""
+"TX","LED2","0603",""
+"RX","LED3","0603",""
+"3V3","LED4","0603",""
+"10k","R1,R6","0402",""
+"220","R2","0402",""
+"1K","R3,R4,R5,R13,R14,R15","0402",""
+"100K","R7,R8,R9,R10,R11,R12","0402",""
+"SKRPABE010","S1,S2","SMD",""
+"MMDT2907A-7-F","U1,U2,U3","SOT65P210X110-6N",""

PCBs/FlipperZero/WiFi-Devboard-Pro/Manufacturing/WiFi-Devboard-Pro-all-pos-EDITED.csv

@@ -0,0 +1,48 @@
+Designator,Val,Package,Mid X,Mid Y,Rotation,Layer
+J2,X6511WVS-08H-C60D48R2,HUSRSP8W66P254_2000X250X850P,-127.300000,-102.100000,0.000000,bottom
+J3,DZ254S-11-10-48,HUSRSP10W66P254_2500X250X850P,-165.400000,-102.100000,0.000000,bottom
+,,,187.100000,-99.900000,0.000000,top
+C1,1u,CAPC1005X60N,150.230000,-94.690000,180.000000,top
+C2,22uF,CAPC1005X80N,181.525000,-90.350000,180.000000,top
+C3,100n,CAPC1005X55N,179.525000,-90.300000,0.000000,top
+C4,100nF,CAPC1005X55N,155.390000,-102.150000,0.000000,top
+C5,22uF,CAPC1005X80N,126.100000,-102.250000,-90.000000,top
+C6,10uF,CAPC1005X70N,133.100000,-99.500000,-90.000000,top
+C7,100n,CAPC1005X55N,116.540000,-92.270000,180.000000,top
+C8,100n,CAPC1005X55N,129.290000,-96.620000,90.000000,top
+C9,100n,CAPC1005X55N,134.420000,-99.510000,-90.000000,top
+C10,100n,CAPC1005X55N,133.000000,-96.625000,90.000000,top
+C11,100n,CAPC1005X55N,136.225000,-96.600000,90.000000,top
+IC1,ESP32-WROOM-32E-N4,ESP32WROOM32EN4,171.300000,-99.850000,-90.000000,top
+IC2,DMP1045U-7,SOT96P240X120-3N,127.500000,-93.650000,-90.000000,top
+IC3,AZ1117H-3.3TRE1,SOT230P700X180-4N,131.100000,-104.400000,180.000000,top
+IC4,DMP1045U-7,SOT96P240X120-3N,137.250000,-103.425000,-90.000000,top
+IC5,DMP1045U-7,SOT96P240X120-3N,140.100000,-106.050000,-90.000000,top
+J1,3220-10-0300-00,322010030000,146.400000,-99.900000,0.000000,top
+J4,Conn_01x11,PinHeader_1x11_P2.54mm_Vertical,129.370000,-109.940000,90.000000,top
+J5,Conn_01x11,PinHeader_1x11_P2.54mm_Vertical,129.370000,-89.840000,90.000000,top
+J6,503398-1892,503398-1892,111.060000,-106.400000,90.000000,top
+LED1,WS2812B-2020,WS2812B2020,155.400000,-99.800000,90.000000,top
+LED2,TX,LEDC1608X50N,142.800000,-93.850000,-90.000000,top
+LED3,RX,LEDC1608X50N,145.900000,-93.850000,-90.000000,top
+LED4,3V3,19217R6CAL1M2VY3T,127.850000,-99.100000,180.000000,top
+R1,10k,RESC1005X40N,150.250000,-93.800000,0.000000,top
+R2,220,RESC1005X40N,155.400000,-97.430000,180.000000,top
+R3,1K,RESC1005X40N,119.900000,-91.910000,-90.000000,top
+R4,1K,RESC1005X40N,117.820000,-91.900000,-90.000000,top
+R5,1K,RESC1005X40N,115.300000,-91.900000,-90.000000,top
+R6,10k,RESC1005X40N,150.110000,-104.890000,180.000000,top
+R7,100K,RESC1005X40N,130.410000,-96.610000,90.000000,top
+R8,100K,RESC1005X40N,131.610000,-96.600000,90.000000,top
+R9,100K,RESC1005X40N,133.790000,-96.590000,90.000000,top
+R10,100K,RESC1005X40N,134.960000,-96.590000,90.000000,top
+R11,100K,RESC1005X40N,137.200000,-96.600000,90.000000,top
+R12,100K,RESC1005X40N,138.400000,-96.600000,90.000000,top
+R13,1K,RESC1005X40N,144.350000,-93.850000,-90.000000,top
+R14,1K,RESC1005X40N,147.400000,-93.800000,-90.000000,top
+R15,1K,RESC1005X40N,127.050000,-96.950000,0.000000,top
+S1,SKRPABE010,SKRPABE010,154.150000,-93.800000,0.000000,top
+S2,SKRPABE010,SKRPABE010,154.150000,-105.950000,0.000000,top
+U1,MMDT2907A-7-F,SOT65P210X110-6N,130.800000,-93.610000,-90.000000,top
+U2,MMDT2907A-7-F,SOT65P210X110-6N,134.150000,-93.600000,-90.000000,top
+U3,MMDT2907A-7-F,SOT65P210X110-6N,137.600000,-93.600000,-90.000000,top

PCBs/FlipperZero/WiFi-Devboard-Pro/README.md

@@ -0,0 +1,9 @@
+# Parts
+
+- Header Pin x8: [C2883805](https://www.lcsc.com/product-detail/Pin-Headers_XKB-Connectivity-X6511WVS-08H-C60D48R1_C2883805.html)
+- Header Pin x10: [C2883807](https://www.lcsc.com/product-detail/Pin-Headers_XKB-Connectivity-X6511WVS-10H-C60D48R1_C2883807.html)
+- Alternative Header: [M20-8771246](https://www.mouser.com/ProductDetail/Harwin/M20-8771246?qs=WS5Jv%252B%252Bx1qWzrNY%252Bb2U9JQ%3D%3D&countryCode=US&currencyCode=USD)
+- Light Pipe: [PLP2-188](https://www.digikey.com/en/products/detail/bivar-inc/PLP2-188/5721973?utm_medium=email&utm_source=oce&utm_campaign=4251_OCE23RT&utm_content=productdetail_US&utm_cid=2955578&so=79456987&mkt_tok=MDI4LVNYSy01MDcAAAGJOBaFWa7m6RHsJZT6mWcYRd9LRyXmqis92EV7j5ftyM5NuNOSOPqUp292m0P5E3FKrEWCFuvb9fObSzuSvVMsopuOMPjO46ylCAR1IzCL)
+- M2x6mm Round Top Screw: [97763A407](https://www.mcmaster.com/97763A407/)
+- M2x8mm Countersunk Screw: [91294A005](https://www.mcmaster.com/91294A005/)
+- M2 Threaded Insert: [94180A307](https://www.mcmaster.com/94180A307/)

PCBs/FlipperZero/WiFi-Devboard-Pro/WiFi-Devboard-Pro.kicad_prl

@@ -0,0 +1,75 @@
+{
+  "board": {
+    "active_layer": 44,
+    "active_layer_preset": "",
+    "auto_track_width": false,
+    "hidden_nets": [
+      "+ext_3V3"
+    ],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "ratsnest_display_mode": 0,
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": true,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      9,
+      10,
+      11,
+      12,
+      13,
+      14,
+      15,
+      16,
+      17,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36
+    ],
+    "visible_layers": "8001130_ffffffff",
+    "zone_display_mode": 1
+  },
+  "meta": {
+    "filename": "WiFi-Devboard-Pro.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  }
+}

PCBs/FlipperZero/WiFi-Devboard-Pro/WiFi-Devboard-Pro.kicad_pro

@@ -33,9 +33,9 @@
         "other_text_thickness": 0.15,
         "other_text_upright": false,
         "pads": {
-          "drill": 0.762,
-          "height": 1.524,
-          "width": 1.524
+          "drill": 2.2,
+          "height": 2.2,
+          "width": 2.2
         },
         "silk_line_width": 0.15,
         "silk_text_italic": false,
@@ -45,10 +45,16 @@
         "silk_text_upright": false,
         "zones": {
           "45_degree_only": false,
-          "min_clearance": 0.508
+          "min_clearance": 0.09999999999999999
         }
       },
-      "diff_pair_dimensions": [],
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
       "drc_exclusions": [],
       "meta": {
         "version": 2
@@ -56,8 +62,8 @@
       "rule_severities": {
         "annular_width": "error",
         "clearance": "error",
-        "copper_edge_clearance": "error",
-        "courtyards_overlap": "error",
+        "copper_edge_clearance": "ignore",
+        "courtyards_overlap": "ignore",
         "diff_pair_gap_out_of_range": "error",
         "diff_pair_uncoupled_length_too_long": "error",
         "drill_out_of_range": "error",
@@ -79,12 +85,12 @@
         "padstack": "error",
         "pth_inside_courtyard": "ignore",
         "shorting_items": "error",
-        "silk_over_copper": "warning",
-        "silk_overlap": "warning",
+        "silk_over_copper": "ignore",
+        "silk_overlap": "ignore",
         "skew_out_of_range": "error",
         "through_hole_pad_without_hole": "error",
         "too_many_vias": "error",
-        "track_dangling": "warning",
+        "track_dangling": "ignore",
         "track_width": "error",
         "tracks_crossing": "error",
         "unconnected_items": "error",
@@ -97,23 +103,51 @@
         "allow_blind_buried_vias": false,
         "allow_microvias": false,
         "max_error": 0.005,
-        "min_clearance": 0.0,
-        "min_copper_edge_clearance": 0.0,
-        "min_hole_clearance": 0.25,
-        "min_hole_to_hole": 0.25,
+        "min_clearance": 0.127,
+        "min_copper_edge_clearance": 0.19999999999999998,
+        "min_hole_clearance": 0.254,
+        "min_hole_to_hole": 0.5,
         "min_microvia_diameter": 0.19999999999999998,
         "min_microvia_drill": 0.09999999999999999,
         "min_silk_clearance": 0.0,
-        "min_through_hole_diameter": 0.3,
-        "min_track_width": 0.19999999999999998,
+        "min_through_hole_diameter": 0.19999999999999998,
+        "min_track_width": 0.127,
         "min_via_annular_width": 0.049999999999999996,
-        "min_via_diameter": 0.39999999999999997,
+        "min_via_diameter": 0.5,
         "solder_mask_clearance": 0.0,
         "solder_mask_min_width": 0.0,
         "use_height_for_length_calcs": true
       },
-      "track_widths": [],
-      "via_dimensions": [],
+      "track_widths": [
+        0.0,
+        0.127,
+        0.2,
+        0.3,
+        0.5,
+        1.0
+      ],
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        },
+        {
+          "diameter": 0.4,
+          "drill": 0.2
+        },
+        {
+          "diameter": 0.5,
+          "drill": 0.3
+        },
+        {
+          "diameter": 1.0,
+          "drill": 0.5
+        },
+        {
+          "diameter": 2.0,
+          "drill": 1.0
+        }
+      ],
       "zones_allow_external_fillets": false,
       "zones_use_no_outline": true
     },
@@ -340,7 +374,7 @@
     "classes": [
       {
         "bus_width": 12.0,
-        "clearance": 0.2,
+        "clearance": 0.127,
         "diff_pair_gap": 0.25,
         "diff_pair_via_gap": 0.25,
         "diff_pair_width": 0.2,
@@ -350,9 +384,53 @@
         "name": "Default",
         "pcb_color": "rgba(0, 0, 0, 0.000)",
         "schematic_color": "rgba(0, 0, 0, 0.000)",
-        "track_width": 0.25,
-        "via_diameter": 0.8,
-        "via_drill": 0.4,
+        "track_width": 0.127,
+        "via_diameter": 0.5,
+        "via_drill": 0.3,
+        "wire_width": 6.0
+      },
+      {
+        "bus_width": 12.0,
+        "clearance": 0.127,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "GND",
+        "nets": [
+          "GND"
+        ],
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.2,
+        "via_diameter": 0.5,
+        "via_drill": 0.3,
+        "wire_width": 6.0
+      },
+      {
+        "bus_width": 12.0,
+        "clearance": 0.127,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Supply",
+        "nets": [
+          "+3V3",
+          "+5V",
+          "+LDO_3V3",
+          "+ext_3V3",
+          "+ext_5V"
+        ],
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.2,
+        "via_diameter": 0.5,
+        "via_drill": 0.3,
         "wire_width": 6.0
       }
     ],

PCBs/FlipperZero/WiFi-Devboard-Pro/bom2grouped_csv_jlcpcb.xsl

@@ -0,0 +1,104 @@
+<!--XSL style sheet to convert EESCHEMA XML Partlist Format to grouped CSV BOM Format
+    Copyright (C) 2014, Wolf Walter.
+    Copyright (C) 2013, Stefan Helmert.
+    Copyright (C) 2018, Kicad developers.
+    Copyright (C) 2019, arturo182.
+    GPL v2.
+
+	Functionality:
+		Generation of JLCPCB PCBA compatible BOM
+
+    How to use this is explained in eeschema.pdf chapter 14.  You enter a command line into the
+    netlist exporter using a new (custom) tab in the netlist export dialog.
+    The command line is
+        xsltproc -o "%O.csv" "FullPathToFile/bom2grouped_csv_jlcpcb.xsl" "%I"
+-->
+<!--
+    @package
+    Generates a JLCPCB PCBA service compatible BOM
+
+	Functionality:
+    * Generate a comma separated value BOM list (csv file type).
+    * Components are sorted by ref and grouped by same value+footprint
+    One value per line
+    Fields are
+    Comment,Designator,Footprint,LCSC
+
+    The command line is
+        xsltproc -o "%O.csv" "full_path/bom2grouped_csv_jlcpcb.xsl" "%I"
+-->
+
+
+<!DOCTYPE xsl:stylesheet [
+  <!ENTITY nl  "&#xd;&#xa;">    <!--new line CR, LF, or LF, your choice -->
+]>
+
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
+	<xsl:output method="text"/>
+
+	<xsl:variable name="digits" select="'1234567890'" />
+
+	<!-- for matching grouping of footprint and value combination -->
+	<xsl:key name="partTypeByValueAndFootprint" match="comp" use="concat(footprint, '-', value)" />
+
+	<!-- for table head and empty table fields-->
+	<xsl:key name="headentr" match="field" use="@name"/>
+
+	    <!-- main part -->
+	<xsl:template match="/export">
+	    <xsl:text>Comment,Designator,Footprint,LCSC</xsl:text>
+	    <!-- all table entries -->
+	    <xsl:apply-templates select="components"/>
+	</xsl:template>
+
+	<xsl:template match="components">
+	    <!-- for Muenchian grouping of footprint and value combination -->
+	    <xsl:for-each select="comp[count(. | key('partTypeByValueAndFootprint', concat(footprint, '-', value))[1]) = 1]">
+		<xsl:sort select="@ref" />
+		<xsl:text>&nl;</xsl:text>
+		<xsl:text>"</xsl:text><xsl:value-of select="value"/><xsl:text>","</xsl:text>
+		<!-- list of all references -->
+		<xsl:for-each select="key('partTypeByValueAndFootprint', concat(footprint, '-', value))">
+			<!-- strip non-digits from reference and sort based on remaining number -->
+			<xsl:sort select="translate(@ref, translate(@ref, $digits, ''), '')" data-type="number" />
+			<xsl:value-of select="@ref"/>
+			<xsl:if test="position() != last()"><xsl:text>,</xsl:text></xsl:if>
+		</xsl:for-each>
+		<xsl:text>","</xsl:text>
+		
+		<xsl:value-of select="footprint"/><xsl:text>","</xsl:text>
+		<xsl:value-of select="fields/field[@name='LCSC']"/><xsl:text>"</xsl:text>
+	    </xsl:for-each>
+	</xsl:template>
+
+	 <!-- table entries with dynamic table head -->
+	<xsl:template match="fields">
+
+	    <!-- remember current fields section -->
+	    <xsl:variable name="fieldvar" select="field"/>
+
+	    <!-- for all existing head entries -->
+	    <xsl:for-each select="/export/components/comp/fields/field[generate-id(.) = generate-id(key('headentr',@name)[1])]">
+		<xsl:variable name="allnames" select="@name"/>
+		<xsl:text>,"</xsl:text>
+
+		<!-- for all field entries in the remembered fields section -->
+		<xsl:for-each select="$fieldvar">
+
+		    <!-- only if this field entry exists in this fields section -->
+		    <xsl:if test="@name=$allnames">
+			<!-- content of the field -->
+			<xsl:value-of select="."/>
+		    </xsl:if>
+		    <!--
+			If it does not exist, use an empty cell in output for this row.
+			Every non-blank entry is assigned to its proper column.
+		    -->
+                </xsl:for-each>
+
+                <xsl:text>"</xsl:text>
+	    </xsl:for-each>
+	</xsl:template>
+
+ </xsl:stylesheet>

README.md

@@ -3,7 +3,7 @@
 <!---[![Build Status](https://travis-ci.com/justcallmekoko/ESP32Marauder.svg?branch=master)](https://travis-ci.com/justcallmekoko/ESP32Marauder)--->
 <!---Shields/Badges https://shields.io/--->
 
-# ESP32 Marauder v0.9.17
+# ESP32 Marauder v0.10.3
 <p align="center"><img alt="Marauder logo" src="https://github.com/justcallmekoko/ESP32Marauder/blob/master/pictures/marauder3L.jpg?raw=true" width="300"></p>
 <p align="center">
   <b>A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32</b>

esp32_marauder/Buffer.cpp

@@ -6,7 +6,7 @@ Buffer::Buffer(){
   bufB = (uint8_t*)malloc(BUF_SIZE);
 }
 
-void Buffer::open(fs::FS* fs, String fn){
+void Buffer::createPcapFile(fs::FS* fs, String fn){
   int i=0;
   do{
     fileName = "/"+fn+"_"+(String)i+".pcap";
@@ -17,12 +17,15 @@ void Buffer::open(fs::FS* fs, String fn){
   
   file = fs->open(fileName, FILE_WRITE);
   file.close();
+}
 
+void Buffer::open(){
   bufSizeA = 0;
   bufSizeB = 0;
-  
+
+  bufSizeB = 0;  
   writing = true;
-  
+
   write(uint32_t(0xa1b2c3d4)); // magic number
   write(uint16_t(2)); // major version number
   write(uint16_t(4)); // minor version number
@@ -30,8 +33,6 @@ void Buffer::open(fs::FS* fs, String fn){
   write(uint32_t(0)); // accuracy of timestamps
   write(uint32_t(SNAP_LEN)); // max length of captured packets, in octets
   write(uint32_t(105)); // data link type
-
-  //useSD = true;
 }
 
 void Buffer::close(fs::FS* fs){
@@ -201,3 +202,34 @@ void Buffer::forceSave(fs::FS* fs){
   saving = false;
   writing = true;
 }
+
+void Buffer::forceSaveSerial() {
+  uint32_t len = bufSizeA + bufSizeB;
+  if(len == 0) return;
+
+  saving = true;
+  writing = false;
+
+  if(useA){
+    if(bufSizeB > 0){
+      Serial1.write(bufB, bufSizeB);
+      bufSizeB = 0;
+    }
+    if(bufSizeA > 0){
+      Serial1.write(bufA, bufSizeA);
+      bufSizeA = 0;
+    }
+  } else {
+    if(bufSizeA > 0){
+      Serial1.write(bufA, bufSizeA);
+      bufSizeA = 0;
+    }
+    if(bufSizeB > 0){
+      Serial1.write(bufB, bufSizeB);
+      bufSizeB = 0;
+    }
+  }
+
+  saving = false;
+  writing = true;
+}

esp32_marauder/Buffer.h

@@ -16,11 +16,13 @@ extern Settings settings_obj;
 class Buffer {
   public:
     Buffer();
-    void open(fs::FS* fs, String fn = "");
+    void createPcapFile(fs::FS* fs, String fn = "");
+    void open();
     void close(fs::FS* fs);
     void addPacket(uint8_t* buf, uint32_t len);
     void save(fs::FS* fs);
     void forceSave(fs::FS* fs);
+    void forceSaveSerial();
   private:
     void write(int32_t n);
     void write(uint32_t n);

esp32_marauder/CommandLine.cpp

@@ -9,6 +9,9 @@ void CommandLine::RunSetup() {
   Serial.println(F("\n\n--------------------------------\n"));
   Serial.println(F("         ESP32 Marauder      \n"));
   Serial.println("            " + version_number + "\n");
+  #ifdef WRITE_PACKETS_SERIAL
+    Serial.println(F("           >> Serial      \n"));
+  #endif
   Serial.println(F("       By: justcallmekoko\n"));
   Serial.println(F("--------------------------------\n\n"));
   
@@ -36,21 +39,41 @@ void CommandLine::main(uint32_t currentTime) {
 
 LinkedList<String> CommandLine::parseCommand(String input, char* delim) {
   LinkedList<String> cmd_args;
-  
-  if (input != "") {
-    
-    char fancy[input.length() + 1] = {};
-    input.toCharArray(fancy, input.length() + 1);
-        
-    char* ptr = strtok(fancy, delim);
-  
-    while (ptr != NULL) {
-      cmd_args.add(String(ptr));
-  
-      ptr = strtok(NULL, delim);
+
+  bool inQuote = false;
+  bool inApostrophe = false;
+  String buffer = "";
+
+  for (int i = 0; i < input.length(); i++) {
+    char c = input.charAt(i);
+
+    if (c == '"') {
+      // Check if the quote is within an apostrophe
+      if (inApostrophe) {
+        buffer += c;
+      } else {
+        inQuote = !inQuote;
+      }
+    } else if (c == '\'') {
+      // Check if the apostrophe is within a quote
+      if (inQuote) {
+        buffer += c;
+      } else {
+        inApostrophe = !inApostrophe;
+      }
+    } else if (!inQuote && !inApostrophe && strchr(delim, c) != NULL) {
+      cmd_args.add(buffer);
+      buffer = "";
+    } else {
+      buffer += c;
     }
   }
 
+  // Add the last argument
+  if (!buffer.isEmpty()) {
+    cmd_args.add(buffer);
+  }
+
   return cmd_args;
 }
 
@@ -93,6 +116,85 @@ bool CommandLine::hasSSIDs() {
   return true;
 }
 
+void CommandLine::showCounts(int selected, int unselected) {
+  Serial.print((String) selected + " selected");
+  
+  if (unselected != -1) 
+    Serial.print(", " + (String) unselected + " unselected");
+  
+  Serial.println("");
+}
+
+String CommandLine::toLowerCase(String str) {
+  String result = str;
+  for (int i = 0; i < str.length(); i++) {
+    int charValue = str.charAt(i);
+    if (charValue >= 65 && charValue <= 90) { // ASCII codes for uppercase letters
+      charValue += 32;
+      result.setCharAt(i, char(charValue));
+    }
+  }
+  return result;
+}
+
+void CommandLine::filterAccessPoints(String filter) {
+  int count_selected = 0;
+  int count_unselected = 0;
+
+  // Split the filter string into individual filters
+  LinkedList<String> filters;
+  int start = 0;
+  int end = filter.indexOf(" or ");
+  while (end != -1) {
+    filters.add(filter.substring(start, end));
+    start = end + 4;
+    end = filter.indexOf(" or ", start);
+  }
+  filters.add(filter.substring(start));
+
+  // Loop over each access point and check if it matches any of the filters
+  for (int i = 0; i < access_points->size(); i++) {
+    bool matchesFilter = false;
+    for (int j = 0; j < filters.size(); j++) {
+      String f = toLowerCase(filters.get(j));
+      if (f.substring(0, 7) == "equals ") {
+        String ssidEquals = f.substring(7);
+        if ((ssidEquals.charAt(0) == '\"' && ssidEquals.charAt(ssidEquals.length() - 1) == '\"' && ssidEquals.length() > 1) ||
+            (ssidEquals.charAt(0) == '\'' && ssidEquals.charAt(ssidEquals.length() - 1) == '\'' && ssidEquals.length() > 1)) {
+          ssidEquals = ssidEquals.substring(1, ssidEquals.length() - 1);
+        }
+        if (access_points->get(i).essid.equalsIgnoreCase(ssidEquals)) {
+          matchesFilter = true;
+          break;
+        }
+      } else if (f.substring(0, 9) == "contains ") {
+        String ssidContains = f.substring(9);
+        if ((ssidContains.charAt(0) == '\"' && ssidContains.charAt(ssidContains.length() - 1) == '\"' && ssidContains.length() > 1) ||
+            (ssidContains.charAt(0) == '\'' && ssidContains.charAt(ssidContains.length() - 1) == '\'' && ssidContains.length() > 1)) {
+          ssidContains = ssidContains.substring(1, ssidContains.length() - 1);
+        }
+        String essid = toLowerCase(access_points->get(i).essid);
+        if (essid.indexOf(ssidContains) != -1) {
+          matchesFilter = true;
+          break;
+        }
+      }
+    }
+    // Toggles the selected state of the AP
+    AccessPoint new_ap = access_points->get(i);
+    new_ap.selected = matchesFilter;
+    access_points->set(i, new_ap);
+
+    if (matchesFilter) {
+      count_selected++;
+    } else {
+      count_unselected++;
+    }
+  }
+
+  this->showCounts(count_selected, count_unselected);
+}
+
 void CommandLine::runCommand(String input) {
   if (input != "")
     Serial.println("#" + input);
@@ -109,13 +211,12 @@ void CommandLine::runCommand(String input) {
     Serial.println(HELP_CH_CMD);
     Serial.println(HELP_SETTINGS_CMD);
     Serial.println(HELP_CLEARAP_CMD_A);
-    Serial.println(HELP_CLEARAP_CMD_B);
     Serial.println(HELP_REBOOT_CMD);
     Serial.println(HELP_UPDATE_CMD_A);
-    Serial.println(HELP_UPDATE_CMD_B);
     
     // WiFi sniff/scan
     Serial.println(HELP_SCANAP_CMD);
+    Serial.println(HELP_SCANSTA_CMD);
     Serial.println(HELP_SNIFF_RAW_CMD);
     Serial.println(HELP_SNIFF_BEACON_CMD);
     Serial.println(HELP_SNIFF_PROBE_CMD);
@@ -131,10 +232,11 @@ void CommandLine::runCommand(String input) {
     // WiFi Aux
     Serial.println(HELP_LIST_AP_CMD_A);
     Serial.println(HELP_LIST_AP_CMD_B);
+    Serial.println(HELP_LIST_AP_CMD_C);
     Serial.println(HELP_SEL_CMD_A);
-    Serial.println(HELP_SEL_CMD_B);
     Serial.println(HELP_SSID_CMD_A);
     Serial.println(HELP_SSID_CMD_B);
+    Serial.println(HELP_JOIN_WIFI_CMD);
     
     // Bluetooth sniff/scan
     Serial.println(HELP_BT_SNIFF_CMD);
@@ -183,12 +285,28 @@ void CommandLine::runCommand(String input) {
   else if (cmd_args.get(0) == CLEARAP_CMD) {
     int ap_sw = this->argSearch(&cmd_args, "-a"); // APs
     int ss_sw = this->argSearch(&cmd_args, "-s"); // SSIDs
+    int cl_sw = this->argSearch(&cmd_args, "-c"); // Stations
 
-    if (ap_sw != -1)
+    if (ap_sw != -1) {
+      #ifdef HAS_SCREEN
+        menu_function_obj.changeMenu(&menu_function_obj.clearAPsMenu);
+      #endif
       wifi_scan_obj.RunClearAPs();
+    }
 
-    if (ss_sw != -1)
+    if (ss_sw != -1) {
+      #ifdef HAS_SCREEN
+        menu_function_obj.changeMenu(&menu_function_obj.clearSSIDsMenu);
+      #endif
       wifi_scan_obj.RunClearSSIDs();
+    }
+
+    if (cl_sw != -1) {
+      #ifdef HAS_SCREEN
+        menu_function_obj.changeMenu(&menu_function_obj.clearAPsMenu);
+      #endif
+      wifi_scan_obj.RunClearStations();
+    }
   }
 
   else if (cmd_args.get(0) == SETTINGS_CMD) {
@@ -258,6 +376,18 @@ void CommandLine::runCommand(String input) {
       #endif
       wifi_scan_obj.StartScan(WIFI_SCAN_RAW_CAPTURE, TFT_WHITE);
     }
+    // Scan stations
+    else if (cmd_args.get(0) == SCANSTA_CMD) {    
+      if(access_points->size() < 1)
+        Serial.println("The AP list is empty. Scan APs first with " + (String)SCANAP_CMD);  
+
+      Serial.println("Starting Station scan. Stop with " + (String)STOPSCAN_CMD);  
+      #ifdef HAS_SCREEN
+        display_obj.clearScreen();
+        menu_function_obj.drawStatusBar();
+      #endif
+      wifi_scan_obj.StartScan(WIFI_SCAN_STATION, TFT_ORANGE);
+    }
     // Beacon sniff
     else if (cmd_args.get(0) == SNIFF_BEACON_CMD) {
       Serial.println("Starting Beacon sniff. Stop with " + (String)STOPSCAN_CMD);
@@ -307,6 +437,14 @@ void CommandLine::runCommand(String input) {
     else if (cmd_args.get(0) == SNIFF_PMKID_CMD) {
       int ch_sw = this->argSearch(&cmd_args, "-c");
       int d_sw = this->argSearch(&cmd_args, "-d"); // Deauth for pmkid
+      int l_sw = this->argSearch(&cmd_args, "-l"); // Only run on list
+
+      if (l_sw != -1) {
+        if (!this->apSelected()) {
+          Serial.println("You don't have any targets selected. Use " + (String)SEL_CMD);
+          return;
+        }
+      }
       
       if (ch_sw != -1) {
         wifi_scan_obj.set_channel = cmd_args.get(ch_sw + 1).toInt();
@@ -319,11 +457,15 @@ void CommandLine::runCommand(String input) {
         Serial.println("Starting PMKID sniff on channel " + (String)wifi_scan_obj.set_channel + ". Stop with " + (String)STOPSCAN_CMD);
         wifi_scan_obj.StartScan(WIFI_SCAN_EAPOL, TFT_VIOLET);
       }
+      else if ((d_sw != -1) && (l_sw != -1)) {
+        Serial.println("Starting TARGETED PMKID sniff with deauthentication on channel " + (String)wifi_scan_obj.set_channel + ". Stop with " + (String)STOPSCAN_CMD);
+        wifi_scan_obj.StartScan(WIFI_SCAN_ACTIVE_LIST_EAPOL, TFT_VIOLET);
+      }
       else {
         Serial.println("Starting PMKID sniff with deauthentication on channel " + (String)wifi_scan_obj.set_channel + ". Stop with " + (String)STOPSCAN_CMD);
         wifi_scan_obj.StartScan(WIFI_SCAN_ACTIVE_EAPOL, TFT_VIOLET);
       }
-    }
+    }    
 
     //// WiFi attack commands
     // attack
@@ -334,6 +476,7 @@ void CommandLine::runCommand(String input) {
       int ap_beacon_sw = this->argSearch(&cmd_args, "-a");
       int src_addr_sw = this->argSearch(&cmd_args, "-s");
       int dst_addr_sw = this->argSearch(&cmd_args, "-d");
+      int targ_sw = this->argSearch(&cmd_args, "-c");
   
       if (attack_type_switch == -1) {
         Serial.println("You must specify an attack type");
@@ -345,14 +488,21 @@ void CommandLine::runCommand(String input) {
         // Branch on attack type
         // Deauth
         if (attack_type == ATTACK_TYPE_DEAUTH) {
-          if (dst_addr_sw == -1) {
+          // Default to broadcast
+          if ((dst_addr_sw == -1) && (targ_sw == -1)) {
             Serial.println("Sending to broadcast...");
             wifi_scan_obj.dst_mac = "ff:ff:ff:ff:ff:ff";
           }
-          else {
+          // Dest addr specified
+          else if (dst_addr_sw != -1) {
             wifi_scan_obj.dst_mac = cmd_args.get(dst_addr_sw + 1);
             Serial.println("Sending to " + wifi_scan_obj.dst_mac + "...");
           }
+          // Station list specified
+          else if (targ_sw != -1)
+            Serial.println("Sending to Station list");
+
+          // Source addr not specified
           if (src_addr_sw == -1) {
             if (!this->apSelected()) {
               Serial.println("You don't have any targets selected. Use " + (String)SEL_CMD);
@@ -363,8 +513,14 @@ void CommandLine::runCommand(String input) {
               menu_function_obj.drawStatusBar();
             #endif
             Serial.println("Starting Deauthentication attack. Stop with " + (String)STOPSCAN_CMD);
-            wifi_scan_obj.StartScan(WIFI_ATTACK_DEAUTH, TFT_RED);
+            // Station list not specified
+            if (targ_sw == -1)
+              wifi_scan_obj.StartScan(WIFI_ATTACK_DEAUTH, TFT_RED);
+            // Station list specified
+            else
+              wifi_scan_obj.StartScan(WIFI_ATTACK_DEAUTH_TARGETED, TFT_ORANGE);
           }
+          // Source addr specified
           else {
             String src_mac_str = cmd_args.get(src_addr_sw + 1);
             sscanf(src_mac_str.c_str(), "%2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx", 
@@ -449,21 +605,29 @@ void CommandLine::runCommand(String input) {
     //// Bluetooth scan/attack commands
     // Bluetooth scan
     if (cmd_args.get(0) == BT_SNIFF_CMD) {
-      Serial.println("Starting Bluetooth scan. Stop with " + (String)STOPSCAN_CMD);
-      #ifdef HAS_SCREEN
-        display_obj.clearScreen();
-        menu_function_obj.drawStatusBar();
+      #ifdef HAS_BT
+        Serial.println("Starting Bluetooth scan. Stop with " + (String)STOPSCAN_CMD);
+        #ifdef HAS_SCREEN
+          display_obj.clearScreen();
+          menu_function_obj.drawStatusBar();
+        #endif
+        wifi_scan_obj.StartScan(BT_SCAN_ALL, TFT_GREEN);
+      #else
+        Serial.println("Bluetooth not supported");
       #endif
-      wifi_scan_obj.StartScan(BT_SCAN_ALL, TFT_GREEN);
     }
     // Bluetooth CC Skimmer scan
     else if (cmd_args.get(0) == BT_SKIM_CMD) {
-      Serial.println("Starting Bluetooth CC Skimmer scan. Stop with " + (String)STOPSCAN_CMD);
-      #ifdef HAS_SCREEN
-        display_obj.clearScreen();
-        menu_function_obj.drawStatusBar();
+      #ifdef HAS_BT
+        Serial.println("Starting Bluetooth CC Skimmer scan. Stop with " + (String)STOPSCAN_CMD);
+        #ifdef HAS_SCREEN
+          display_obj.clearScreen();
+          menu_function_obj.drawStatusBar();
+        #endif
+        wifi_scan_obj.StartScan(BT_SCAN_SKIMMERS, TFT_MAGENTA);
+      #else
+        Serial.println("Bluetooth not supported");
       #endif
-      wifi_scan_obj.StartScan(BT_SCAN_SKIMMERS, TFT_MAGENTA);
     }
 
     // Update command
@@ -482,38 +646,73 @@ void CommandLine::runCommand(String input) {
       }
       // Update via SD
       else if (sd_sw != -1) {
-        if (!sd_obj.supported) {
-          Serial.println("SD card is not connected. Cannot perform SD Update");
-          return;
-        }
+        #ifndef WRITE_PACKETS_SERIAL
+          if (!sd_obj.supported) {
+            Serial.println("SD card is not connected. Cannot perform SD Update");
+            return;
+          }
+          wifi_scan_obj.currentScanMode = OTA_UPDATE;
+          sd_obj.runUpdate();
+        #else
+          Serial.println("SD card not initialized. Cannot perform SD Update");
+        #endif
       }
     }
   }
 
 
+  int count_selected = 0;
   //// WiFi aux commands
   // List access points
   if (cmd_args.get(0) == LIST_AP_CMD) {
     int ap_sw = this->argSearch(&cmd_args, "-a");
     int ss_sw = this->argSearch(&cmd_args, "-s");
+    int cl_sw = this->argSearch(&cmd_args, "-c");
 
     // List APs
     if (ap_sw != -1) {
       for (int i = 0; i < access_points->size(); i++) {
-        if (access_points->get(i).selected)
-          Serial.println("[" + (String)i + "] " + access_points->get(i).essid + " " + (String)access_points->get(i).rssi + " (selected)");
+        if (access_points->get(i).selected) {
+          Serial.println("[" + (String)i + "][CH:" + (String)access_points->get(i).channel + "] " + access_points->get(i).essid + " " + (String)access_points->get(i).rssi + " (selected)");
+          count_selected += 1;
+        } 
         else
-          Serial.println("[" + (String)i + "] " + access_points->get(i).essid + " " + (String)access_points->get(i).rssi);
+          Serial.println("[" + (String)i + "][CH:" + (String)access_points->get(i).channel + "] " + access_points->get(i).essid + " " + (String)access_points->get(i).rssi);
       }
+      this->showCounts(count_selected);
     }
     // List SSIDs
     else if (ss_sw != -1) {
       for (int i = 0; i < ssids->size(); i++) {
-        if (ssids->get(i).selected)
+        if (ssids->get(i).selected) {
           Serial.println("[" + (String)i + "] " + ssids->get(i).essid + " (selected)");
+          count_selected += 1;
+        } 
         else
           Serial.println("[" + (String)i + "] " + ssids->get(i).essid);
       }
+      this->showCounts(count_selected);
+    }
+    // List Stations
+    else if (cl_sw != -1) {
+      char sta_mac[] = "00:00:00:00:00:00";
+      for (int x = 0; x < access_points->size(); x++) {
+        Serial.println("[" + (String)x + "] " + access_points->get(x).essid + " " + (String)access_points->get(x).rssi + ":");
+        for (int i = 0; i < access_points->get(x).stations->size(); i++) {
+          wifi_scan_obj.getMAC(sta_mac, stations->get(access_points->get(x).stations->get(i)).mac, 0);
+          if (stations->get(access_points->get(x).stations->get(i)).selected) {
+            Serial.print("  [" + (String)access_points->get(x).stations->get(i) + "] ");
+            Serial.print(sta_mac);
+            Serial.println(" (selected)");
+            count_selected += 1;
+          }
+          else {
+            Serial.print("  [" + (String)access_points->get(x).stations->get(i) + "] ");
+            Serial.println(sta_mac);
+          }
+        }
+      }
+      this->showCounts(count_selected);
     }
     else {
       Serial.println("You did not specify which list to show");
@@ -525,51 +724,118 @@ void CommandLine::runCommand(String input) {
     // Get switches
     int ap_sw = this->argSearch(&cmd_args, "-a");
     int ss_sw = this->argSearch(&cmd_args, "-s");
+    int cl_sw = this->argSearch(&cmd_args, "-c");
+    int filter_sw = this->argSearch(&cmd_args, "-f");
 
+    count_selected = 0;
+    int count_unselected = 0;
     // select Access points
     if (ap_sw != -1) {
-      // Get list of indices
-      LinkedList<String> ap_index = this->parseCommand(cmd_args.get(ap_sw + 1), ",");
 
-      // Select ALL APs
-      if (cmd_args.get(ap_sw + 1) == "all") {
-        for (int i = 0; i < access_points->size(); i++) {
-          if (access_points->get(i).selected) {
+      // If the filters parameter was specified
+      if (filter_sw != -1) {
+        String filter_ap = cmd_args.get(filter_sw + 1);
+        this->filterAccessPoints(filter_ap);
+      } else {
+        // Get list of indices
+        LinkedList<String> ap_index = this->parseCommand(cmd_args.get(ap_sw + 1), ",");
+
+        // Select ALL APs
+        if (cmd_args.get(ap_sw + 1) == "all") {
+          for (int i = 0; i < access_points->size(); i++) {
+            if (access_points->get(i).selected) {
+              // Unselect "selected" ap
+              AccessPoint new_ap = access_points->get(i);
+              new_ap.selected = false;
+              access_points->set(i, new_ap);
+              count_unselected += 1;
+            }
+            else {
+              // Select "unselected" ap
+              AccessPoint new_ap = access_points->get(i);
+              new_ap.selected = true;
+              access_points->set(i, new_ap);
+              count_selected += 1;
+            }
+          }
+          this->showCounts(count_selected, count_unselected);
+        }
+        // Select specific APs
+        else {
+          // Mark APs as selected
+          for (int i = 0; i < ap_index.size(); i++) {
+            int index = ap_index.get(i).toInt();
+            if (!this->inRange(access_points->size(), index)) {
+              Serial.println("Index not in range: " + (String)index);
+              continue;
+            }
+            if (access_points->get(index).selected) {
+              // Unselect "selected" ap
+              AccessPoint new_ap = access_points->get(index);
+              new_ap.selected = false;
+              access_points->set(index, new_ap);
+              count_unselected += 1;
+            }
+            else {
+              // Select "unselected" ap
+              AccessPoint new_ap = access_points->get(index);
+              new_ap.selected = true;
+              access_points->set(index, new_ap);
+              count_selected += 1;
+            }
+          }
+          this->showCounts(count_selected, count_unselected);
+        }
+      }
+    }
+    else if (cl_sw != -1) {
+      LinkedList<String> sta_index = this->parseCommand(cmd_args.get(cl_sw + 1), ",");
+      
+      // Select all Stations
+      if (cmd_args.get(cl_sw + 1) == "all") {
+        for (int i = 0; i < stations->size(); i++) {
+          if (stations->get(i).selected) {
             // Unselect "selected" ap
-            AccessPoint new_ap = access_points->get(i);
-            new_ap.selected = false;
-            access_points->set(i, new_ap);
+            Station new_sta = stations->get(i);
+            new_sta.selected = false;
+            stations->set(i, new_sta);
+            count_unselected += 1;
           }
           else {
             // Select "unselected" ap
-            AccessPoint new_ap = access_points->get(i);
-            new_ap.selected = true;
-            access_points->set(i, new_ap);
+            Station new_sta = stations->get(i);
+            new_sta.selected = true;
+            stations->set(i, new_sta);
+            count_selected += 1;
           }
         }
+        this->showCounts(count_selected, count_unselected);
       }
-      // Select specific APs
+      // Select specific Stations
       else {
-        // Mark APs as selected
-        for (int i = 0; i < ap_index.size(); i++) {
-          int index = ap_index.get(i).toInt();
-          if (!this->inRange(access_points->size(), index)) {
+        // Mark Stations as selected
+        for (int i = 0; i < sta_index.size(); i++) {
+          int index = sta_index.get(i).toInt();
+          if (!this->inRange(stations->size(), index)) {
             Serial.println("Index not in range: " + (String)index);
             continue;
           }
-          if (access_points->get(index).selected) {
+          if (stations->get(index).selected) {
             // Unselect "selected" ap
-            AccessPoint new_ap = access_points->get(index);
-            new_ap.selected = false;
-            access_points->set(index, new_ap);
+            Station new_sta = stations->get(index);
+            new_sta.selected = false;
+            stations->set(index, new_sta);
+            count_unselected += 1;
           }
           else {
             // Select "unselected" ap
-            AccessPoint new_ap = access_points->get(index);
-            new_ap.selected = true;
-            access_points->set(index, new_ap);
+            Station new_sta = stations->get(index);
+            new_sta.selected = true;
+            stations->set(index, new_sta);
+            count_selected += 1;
           }
         }
+        this->showCounts(count_selected, count_unselected);
       }
     }
     // select ssids
@@ -589,14 +855,17 @@ void CommandLine::runCommand(String input) {
           ssid new_ssid = ssids->get(index);
           new_ssid.selected = false;
           ssids->set(index, new_ssid);
+          count_unselected += 1;
         }
         else {
           // Select "unselected" ap
           ssid new_ssid = ssids->get(index);
           new_ssid.selected = true;
           ssids->set(index, new_ssid);
+          count_selected += 1;
         }
       }
+      this->showCounts(count_selected, count_unselected);
     }
     else {
       Serial.println("You did not specify which list to select from");
@@ -640,4 +909,41 @@ void CommandLine::runCommand(String input) {
       return;
     }
   }
+  // Join WiFi
+  else if (cmd_args.get(0) == JOINWIFI_CMD) {
+    int n_sw = this->argSearch(&cmd_args, "-n"); // name
+    int a_sw = this->argSearch(&cmd_args, "-a"); // access point
+    int s_sw = this->argSearch(&cmd_args, "-s"); // ssid
+    int p_sw = this->argSearch(&cmd_args, "-p");   
+    
+    String essid = "";
+    String pwx = "";
+    
+    if (s_sw != -1) {
+      int index = cmd_args.get(s_sw + 1).toInt();
+      if (!this->inRange(ssids->size(), index)) {
+        Serial.println("Index not in range: " + (String)index);
+        return;
+      }
+      essid = ssids->get(index).essid;
+    } else if (a_sw != -1) {
+      int index = cmd_args.get(a_sw + 1).toInt();
+      if (!this->inRange(access_points->size(), index)) {
+        Serial.println("Index not in range: " + (String)index);
+        return;
+      }
+      essid = access_points->get(index).essid;
+    } else if (n_sw != -1) {
+      essid = cmd_args.get(n_sw + 1);
+    } else {
+      Serial.println("You must specify an access point or ssid");
+      return;
+    }
+    
+    if (p_sw != -1) {
+      pwx = cmd_args.get(p_sw + 1);
+    }
+    Serial.println("Attempting to join WiFi with ssid " + (String)essid);
+    wifi_scan_obj.joinWiFi(essid, pwx);
+  }
 }

esp32_marauder/CommandLine.h

@@ -24,6 +24,7 @@ extern SDInterface sd_obj;
 extern Settings settings_obj;
 extern LinkedList<AccessPoint>* access_points;
 extern LinkedList<ssid>* ssids;
+extern LinkedList<Station>* stations;
 extern const String PROGMEM version_number;
 
 //// Commands
@@ -38,6 +39,7 @@ const char PROGMEM SETTINGS_CMD[] = "settings";
 
 // WiFi sniff/scan
 const char PROGMEM SCANAP_CMD[] = "scanap";
+const char PROGMEM SCANSTA_CMD[] = "scansta";
 const char PROGMEM SNIFF_RAW_CMD[] = "sniffraw";
 const char PROGMEM SNIFF_BEACON_CMD[] = "sniffbeacon";
 const char PROGMEM SNIFF_PROBE_CMD[] = "sniffprobe";
@@ -58,6 +60,7 @@ const char PROGMEM ATTACK_TYPE_RR[] = "rickroll";
 const char PROGMEM LIST_AP_CMD[] = "list";
 const char PROGMEM SEL_CMD[] = "select";
 const char PROGMEM SSID_CMD[] = "ssid";
+const char PROGMEM JOINWIFI_CMD[] = "join";
 
 // Bluetooth sniff/scan
 const char PROGMEM BT_SNIFF_CMD[] = "sniffbt";
@@ -68,32 +71,32 @@ const char PROGMEM BT_SKIM_CMD[] = "sniffskim";
 // Admin
 const char PROGMEM HELP_HEAD[] = "============ Commands ============";
 const char PROGMEM HELP_CH_CMD[] = "channel [-s <channel>]";
-const char PROGMEM HELP_CLEARAP_CMD_A[] = "clearlist -a";
-const char PROGMEM HELP_CLEARAP_CMD_B[] = "clearlist -s";
+const char PROGMEM HELP_CLEARAP_CMD_A[] = "clearlist -a/-c/-s";
 const char PROGMEM HELP_REBOOT_CMD[] = "reboot";
-const char PROGMEM HELP_UPDATE_CMD_A[] = "update -s";
-const char PROGMEM HELP_UPDATE_CMD_B[] = "update -w";
+const char PROGMEM HELP_UPDATE_CMD_A[] = "update -s/-w";
 const char PROGMEM HELP_SETTINGS_CMD[] = "settings [-s <setting> enable/disable>]/[-r]";
 
 // WiFi sniff/scan
 const char PROGMEM HELP_SCANAP_CMD[] = "scanap";
+const char PROGMEM HELP_SCANSTA_CMD[] = "scansta";
 const char PROGMEM HELP_SNIFF_RAW_CMD[] = "sniffraw";
 const char PROGMEM HELP_SNIFF_BEACON_CMD[] = "sniffbeacon";
 const char PROGMEM HELP_SNIFF_PROBE_CMD[] = "sniffprobe";
 const char PROGMEM HELP_SNIFF_PWN_CMD[] = "sniffpwn";
 const char PROGMEM HELP_SNIFF_ESP_CMD[] = "sniffesp";
 const char PROGMEM HELP_SNIFF_DEAUTH_CMD[] = "sniffdeauth";
-const char PROGMEM HELP_SNIFF_PMKID_CMD[] = "sniffpmkid [-c <channel>]";
+const char PROGMEM HELP_SNIFF_PMKID_CMD[] = "sniffpmkid [-c <channel>][-d][-l]";
 const char PROGMEM HELP_STOPSCAN_CMD[] = "stopscan";
+const char PROGMEM HELP_JOIN_WIFI_CMD[] = "join [-n <ssid_name>/-s <ssid_index>/-a <access_point_index>] -p <password>";
 
 // WiFi attack
-const char PROGMEM HELP_ATTACK_CMD[] = "attack -t <beacon [-l/-r/-a]/deauth [-s <src mac>] [-d <dst mac>]/probe/rickroll>";
+const char PROGMEM HELP_ATTACK_CMD[] = "attack -t <beacon [-l/-r/-a]/deauth [-c]/[-s <src mac>] [-d <dst mac>]/probe/rickroll>";
 
 // WiFi Aux
 const char PROGMEM HELP_LIST_AP_CMD_A[] = "list -s";
 const char PROGMEM HELP_LIST_AP_CMD_B[] = "list -a";
-const char PROGMEM HELP_SEL_CMD_A[] = "select -a <index (comma separated)>";
-const char PROGMEM HELP_SEL_CMD_B[] = "select -s <index (comma separated)>";
+const char PROGMEM HELP_LIST_AP_CMD_C[] = "list -c";
+const char PROGMEM HELP_SEL_CMD_A[] = "select -a/-s/-c <index (comma separated)>/-f \"equals <String> or contains <String>\"";
 const char PROGMEM HELP_SSID_CMD_A[] = "ssid -a [-g <count>/-n <name>]";
 const char PROGMEM HELP_SSID_CMD_B[] = "ssid -r <index>";
 
@@ -107,11 +110,14 @@ class CommandLine {
   private:
     String getSerialInput();
     LinkedList<String> parseCommand(String input, char* delim);
+    String toLowerCase(String str);
+    void filterAccessPoints(String filter);
     void runCommand(String input);
     bool checkValueExists(LinkedList<String>* cmd_args_list, int index);
     bool inRange(int max, int index);
     bool apSelected();
     bool hasSSIDs();
+    void showCounts(int selected, int unselected = -1);
     int argSearch(LinkedList<String>* cmd_args, String key);
 
     const char* ascii_art =

esp32_marauder/LedInterface.cpp

@@ -18,6 +18,50 @@ void LedInterface::RunSetup() {
 }
 
 void LedInterface::main(uint32_t currentTime) {
+  if ((!settings_obj.loadSetting<bool>("EnableLED")) ||
+      (this->current_mode == MODE_OFF)) {
+    this->ledOff();
+    return;
+  }
+
+  else if (this->current_mode == MODE_RAINBOW) {
+    this->rainbow();
+  }
+  else if (this->current_mode == MODE_ATTACK) {
+    this->attackLed();
+  }
+  else if (this->current_mode == MODE_SNIFF) {
+    this->sniffLed();
+  }
+  else {
+    this->ledOff();
+  }
+};
+
+void LedInterface::setMode(uint8_t new_mode) {
+  this->current_mode = new_mode;
+}
+
+uint8_t LedInterface::getMode() {
+  return this->current_mode;
+}
+
+void LedInterface::sniffLed() {
+  strip.setPixelColor(0, strip.Color(0, 0, 255));
+  strip.show();
+}
+
+void LedInterface::attackLed() {
+  strip.setPixelColor(0, strip.Color(255, 0, 0));
+  strip.show();
+}
+
+void LedInterface::ledOff() {
+  strip.setPixelColor(0, strip.Color(0, 0, 0));
+  strip.show();
+}
+
+void LedInterface::rainbow() {
   strip.setPixelColor(0, this->Wheel((0 * 256 / 100 + this->wheel_pos) % 256));
   strip.show();
     
@@ -26,7 +70,7 @@ void LedInterface::main(uint32_t currentTime) {
   this->wheel_pos = this->wheel_pos - this->wheel_speed;
   if (this->wheel_pos < 0)
     this->wheel_pos = 255;
-};
+}
 
 uint32_t LedInterface::Wheel(byte WheelPos) {
   WheelPos = 255 - WheelPos;

esp32_marauder/LedInterface.h

@@ -1,12 +1,19 @@
 #ifndef LedInterface_h
 #define LedInterface_h
 
+#include "configs.h"
+#include "settings.h"
 #include <Arduino.h>
 #include <Adafruit_NeoPixel.h>
 
-#define PIN 25
 #define Pixels 1
 
+#define MODE_OFF 0
+#define MODE_RAINBOW 1
+#define MODE_ATTACK 2
+#define MODE_SNIFF 3
+
+extern Settings settings_obj;
 extern Adafruit_NeoPixel strip;
 
 class LedInterface {
@@ -19,12 +26,23 @@ class LedInterface {
     int wheel_speed = 1; // lower = slower
 
     uint32_t Wheel(byte WheelPos);
+
+    uint8_t current_mode = MODE_OFF;
+
+    void rainbow();
+    void ledOff();
+    void attackLed();
+    void sniffLed();
   
   public:
     LedInterface();
 
     void RunSetup();
     void main(uint32_t currentTime);
+
+    void setMode(uint8_t);
+    uint8_t getMode();
+    
   
 };
 

esp32_marauder/MenuFunctions.cpp

@@ -132,27 +132,29 @@ MenuFunctions::MenuFunctions()
     lv_textarea_set_text(ta1, "");
     lv_textarea_set_placeholder_text(ta1, "Ducky script");
   
-    if (sd_obj.supported) {
-      // Create load button
-      lv_obj_t * label;
-      lv_obj_t * load_btn = lv_btn_create(lv_scr_act(), NULL);
-      lv_obj_set_event_cb(load_btn, load_btn_cb);
-      lv_obj_set_height(load_btn, 35);
-      lv_obj_set_width(load_btn, LV_HOR_RES / 3);
-      lv_obj_align(load_btn, ta1, LV_ALIGN_IN_TOP_RIGHT, NULL, (LV_VER_RES / 2) - 35); // align to text area
-      label = lv_label_create(load_btn, NULL);
-      lv_label_set_text(label, text05);
-    
-      // Create Save As button
-      lv_obj_t * label2;
-      lv_obj_t * save_as_btn = lv_btn_create(lv_scr_act(), NULL);
-      lv_obj_set_event_cb(save_as_btn, load_btn_cb);
-      lv_obj_set_height(save_as_btn, 35);
-      lv_obj_set_width(save_as_btn, LV_HOR_RES / 3);
-      lv_obj_align(save_as_btn, ta1, LV_ALIGN_IN_TOP_MID, NULL, (LV_VER_RES / 2) - 35); // align to text area
-      label2 = lv_label_create(save_as_btn, NULL);
-      lv_label_set_text(label2, text06);
-    }
+    #ifndef WRITE_PACKETS_SERIAL
+      if (sd_obj.supported) {
+        // Create load button
+        lv_obj_t * label;
+        lv_obj_t * load_btn = lv_btn_create(lv_scr_act(), NULL);
+        lv_obj_set_event_cb(load_btn, load_btn_cb);
+        lv_obj_set_height(load_btn, 35);
+        lv_obj_set_width(load_btn, LV_HOR_RES / 3);
+        lv_obj_align(load_btn, ta1, LV_ALIGN_IN_TOP_RIGHT, NULL, (LV_VER_RES / 2) - 35); // align to text area
+        label = lv_label_create(load_btn, NULL);
+        lv_label_set_text(label, text05);
+      
+        // Create Save As button
+        lv_obj_t * label2;
+        lv_obj_t * save_as_btn = lv_btn_create(lv_scr_act(), NULL);
+        lv_obj_set_event_cb(save_as_btn, load_btn_cb);
+        lv_obj_set_height(save_as_btn, 35);
+        lv_obj_set_width(save_as_btn, LV_HOR_RES / 3);
+        lv_obj_align(save_as_btn, ta1, LV_ALIGN_IN_TOP_MID, NULL, (LV_VER_RES / 2) - 35); // align to text area
+        label2 = lv_label_create(save_as_btn, NULL);
+        lv_label_set_text(label2, text06);
+      }
+    #endif
     
     // Focus it on one of the text areas to start
     lv_keyboard_set_textarea(kb, ta1);
@@ -213,34 +215,6 @@ MenuFunctions::MenuFunctions()
         }
       }
     }
-  
-    /*
-    if (event == LV_EVENT_VALUE_CHANGED) {      
-      if (lv_btn_get_state(btn) == LV_BTN_STATE_CHECKED_RELEASED) {
-        //Serial.print("Toggle on: ");
-        //Serial.println(btn_text);
-        for (int i = 0; i < access_points->size(); i++) {
-          if (access_points->get(i).essid == btn_text) {
-            Serial.println("Adding AP: " + (String)access_points->get(i).essid);
-            AccessPoint ap = access_points->get(i);
-            ap.selected = true;
-            access_points->set(i, ap);
-          }
-        }
-      }
-      else {
-        //Serial.print("Toggle off: ");
-        //Serial.println(btn_text);
-        for (int i = 0; i < access_points->size(); i++) {
-          if (access_points->get(i).essid == btn_text) {
-            Serial.println("Removing AP: " + (String)access_points->get(i).essid);
-            AccessPoint ap = access_points->get(i);
-            ap.selected = false;
-            access_points->set(i, ap);
-          }
-        }
-      }
-    }*/
   }
   
   void MenuFunctions::displaySettingsGFX(){
@@ -273,35 +247,119 @@ MenuFunctions::MenuFunctions()
       list_btn = lv_list_add_btn(list1, LV_SYMBOL_WIFI, buf);
       lv_btn_set_checkable(list_btn, false);
       lv_obj_set_event_cb(list_btn, settings_list_cb);
+    }
+  }
+
+  // GFX Function to build a list showing all Stations scanned
+  void MenuFunctions::addStationGFX(){
+    extern LinkedList<Station>* stations;
+    extern LinkedList<AccessPoint>* access_points;
+    extern WiFiScan wifi_scan_obj;
   
-      //lv_list_add_text(list1, buf);
+    lv_obj_t * list1 = lv_list_create(lv_scr_act(), NULL);
+    lv_obj_set_size(list1, 160, 200);
+    lv_obj_set_width(list1, LV_HOR_RES);
+    lv_obj_align(list1, NULL, LV_ALIGN_CENTER, 0, 0);
   
-      // Create the dropdown menu
-      /*lv_obj_t * dd = lv_dropdown_create(list1, NULL);
-      lv_dropdown_set_options(dd, "Apple\n"
-                                  "Banana\n"
-                                  "Orange\n"
-                                  "Cherry\n"
-                                  "Grape\n"
-                                  "Raspberry\n"
-                                  "Melon\n"
-                                  "Orange\n"
-                                  "Lemon\n"
-                                  "Nuts");
+    lv_obj_t * list_btn;
   
-      //lv_obj_align(dd, LV_ALIGN_IN_RIGHT_MID, 0, 20);
-      lv_obj_align(dd, NULL, LV_ALIGN_IN_RIGHT_MID, 0, 0);
-      lv_obj_set_width(dd, LV_HOR_RES / 3);
-      lv_obj_set_event_cb(dd, setting_dropdown_cb);
-      //lv_obj_add_event_cb(dd, setting_dropdown_cb, LV_EVENT_ALL, NULL);*/
+    lv_obj_t * label;
+  
+    list_btn = lv_list_add_btn(list1, LV_SYMBOL_CLOSE, text09);
+    lv_obj_set_event_cb(list_btn, station_list_cb);
+
+    char addr[] = "00:00:00:00:00:00";
+    for (int x = 0; x < access_points->size(); x++) {
+      AccessPoint cur_ap = access_points->get(x);
+
+      // Add non clickable button for AP
+      String full_label = "AP: " + cur_ap.essid;
+      char buf[full_label.length() + 1] = {};
+      full_label.toCharArray(buf, full_label.length() + 1);
+      list_btn = lv_list_add_btn(list1, NULL, buf);
+      lv_btn_set_checkable(list_btn, false);
       
-      //if (access_points->get(i).selected)
-      //  lv_btn_toggle(list_btn);
+      int cur_ap_sta_len = access_points->get(x).stations->size();
+      for (int y = 0; y < cur_ap_sta_len; y++) {
+        Station cur_sta = stations->get(cur_ap.stations->get(y));
+        // Convert uint8_t MAC to char array
+        wifi_scan_obj.getMAC(addr, cur_sta.mac, 0);
+        
+        //char buf[stations->get(i).mac.length() + 1] = {};
+        //stations->get(i).mac.toCharArray(buf, stations->get(i).mac.length() + 1);
+        
+        list_btn = lv_list_add_btn(list1, LV_SYMBOL_WIFI, addr);
+        lv_btn_set_checkable(list_btn, true);
+        lv_obj_set_event_cb(list_btn, station_list_cb);
+    
+        if (cur_sta.selected)
+          lv_btn_toggle(list_btn);
+      }
+    }
+  }
+
+  // Function to work with list of Stations
+  void station_list_cb(lv_obj_t * btn, lv_event_t event) {
+    extern LinkedList<Station>* stations;
+    extern MenuFunctions menu_function_obj;
+    extern WiFiScan wifi_scan_obj;
   
-      //lv_obj_t * btn1 = lv_btn_create(list_btn, NULL);
-      //lv_obj_set_event_cb(btn1, ap_list_cb);
-      //lv_obj_align(btn1, NULL, LV_ALIGN_CENTER, 0, 0);
-      //lv_btn_set_checkable(btn1, true);
+    String btn_text = lv_list_get_btn_text(btn);
+    String display_string = "";
+    char addr[] = "00:00:00:00:00:00";
+    
+    if (event == LV_EVENT_CLICKED) {
+      if (btn_text != text09) {
+        //lv_list_focus_btn(lv_obj_get_parent(lv_obj_get_parent(btn)), btn);
+      }
+      else {
+        Serial.println("Exiting...");
+        lv_obj_del_async(lv_obj_get_parent(lv_obj_get_parent(btn)));
+  
+        for (int i = 0; i < stations->size(); i++) {
+          if (stations->get(i).selected) {
+            wifi_scan_obj.getMAC(addr, stations->get(i).mac, 0);
+            Serial.print("Selected: ");
+            Serial.println(addr);
+          }
+        }
+  
+        printf("LV_EVENT_CANCEL\n");
+        menu_function_obj.deinitLVGL();
+        wifi_scan_obj.StartScan(WIFI_SCAN_OFF);
+        display_obj.exit_draw = true; // set everything back to normal
+      }
+    }
+    
+    if (event == LV_EVENT_VALUE_CHANGED) {     
+      if (lv_btn_get_state(btn) == LV_BTN_STATE_CHECKED_RELEASED) {
+        //Serial.print("Toggle on: ");
+        //Serial.println(btn_text);
+        for (int i = 0; i < stations->size(); i++) {
+          wifi_scan_obj.getMAC(addr, stations->get(i).mac, 0); 
+          if (strcmp(addr, btn_text.c_str()) == 0) {
+            Serial.print("Adding Station: ");
+            Serial.println(addr);
+            Station sta = stations->get(i);
+            sta.selected = true;
+            stations->set(i, sta);
+          }
+        }
+      }
+      else {
+        //Serial.print("Toggle off: ");
+        //Serial.println(btn_text);
+        for (int i = 0; i < stations->size(); i++) {
+          wifi_scan_obj.getMAC(addr, stations->get(i).mac, 0); 
+          if (strcmp(addr, btn_text.c_str()) == 0) {
+            Serial.print("Removing Station: ");
+            Serial.println(addr);
+            Station sta = stations->get(i);
+            sta.selected = false;
+            stations->set(i, sta);
+          }
+        }
+      }
     }
   }
   
@@ -331,14 +389,6 @@ MenuFunctions::MenuFunctions()
   
       if (access_points->get(i).selected)
         lv_btn_toggle(list_btn);
-  
-      //lv_obj_t * btn1 = lv_btn_create(list_btn, NULL);
-      //lv_obj_set_event_cb(btn1, ap_list_cb);
-      //lv_obj_align(btn1, NULL, LV_ALIGN_CENTER, 0, 0);
-      //lv_btn_set_checkable(btn1, true);
-  
-      //label = lv_label_create(btn1, NULL);
-      //lv_label_set_text(label, buf);
     }
   }
   
@@ -841,6 +891,7 @@ void MenuFunctions::main(uint32_t currentTime)
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_AUTH) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH_MANUAL) &&
+      (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH_TARGETED) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_MIMIC) &&
       (wifi_scan_obj.currentScanMode != WIFI_ATTACK_RICK_ROLL))
     display_obj.displayBuffer();
@@ -850,7 +901,6 @@ void MenuFunctions::main(uint32_t currentTime)
   int pre_getTouch = millis();
 
   // getTouch causes a 10ms delay which makes beacon spam less effective
-  //if (wifi_scan_obj.currentScanMode == WIFI_SCAN_OFF)
   #ifndef MARAUDER_MINI
     pressed = display_obj.tft.getTouch(&t_x, &t_y);
   #endif
@@ -867,6 +917,7 @@ void MenuFunctions::main(uint32_t currentTime)
       // Stop the current scan
       if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_PROBE) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_RAW_CAPTURE) ||
+          (wifi_scan_obj.currentScanMode == WIFI_SCAN_STATION) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP_FULL) ||
@@ -879,13 +930,13 @@ void MenuFunctions::main(uint32_t currentTime)
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_AUTH) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH_MANUAL) ||
+          (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH_TARGETED) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_MIMIC) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_RICK_ROLL) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_BEACON_LIST) ||
           (wifi_scan_obj.currentScanMode == BT_SCAN_ALL) ||
           (wifi_scan_obj.currentScanMode == BT_SCAN_SKIMMERS))
       {
-        //Serial.println("Stopping scan...");
         wifi_scan_obj.StartScan(WIFI_SCAN_OFF);
   
         // If we don't do this, the text and button coordinates will be off
@@ -915,6 +966,7 @@ void MenuFunctions::main(uint32_t currentTime)
       // Stop the current scan
       if ((wifi_scan_obj.currentScanMode == WIFI_SCAN_PROBE) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_RAW_CAPTURE) ||
+          (wifi_scan_obj.currentScanMode == WIFI_SCAN_STATION) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_TARGET_AP_FULL) ||
@@ -927,6 +979,7 @@ void MenuFunctions::main(uint32_t currentTime)
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_AUTH) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH_MANUAL) ||
+          (wifi_scan_obj.currentScanMode == WIFI_ATTACK_DEAUTH_TARGETED) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_MIMIC) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_RICK_ROLL) ||
           (wifi_scan_obj.currentScanMode == WIFI_ATTACK_BEACON_LIST) ||
@@ -934,9 +987,9 @@ void MenuFunctions::main(uint32_t currentTime)
           (wifi_scan_obj.currentScanMode == BT_SCAN_SKIMMERS) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_EAPOL) ||
           (wifi_scan_obj.currentScanMode == WIFI_SCAN_ACTIVE_EAPOL) ||
+          (wifi_scan_obj.currentScanMode == WIFI_SCAN_ACTIVE_LIST_EAPOL) ||
           (wifi_scan_obj.currentScanMode == WIFI_PACKET_MONITOR))
       {
-        //Serial.println("Stopping scan...");
         wifi_scan_obj.StartScan(WIFI_SCAN_OFF);
   
         // If we don't do this, the text and button coordinates will be off
@@ -963,9 +1016,9 @@ void MenuFunctions::main(uint32_t currentTime)
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_AUTH) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH_MANUAL) &&
+        (wifi_scan_obj.currentScanMode != WIFI_ATTACK_DEAUTH_TARGETED) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_MIMIC) &&
         (wifi_scan_obj.currentScanMode != WIFI_ATTACK_RICK_ROLL))
-        //(wifi_scan_obj.currentScanMode != WIFI_ATTACK_BEACON_LIST))
     {
       // Need this to set all keys to false
       for (uint8_t b = 0; b < BUTTON_ARRAY_LEN; b++) {
@@ -980,8 +1033,6 @@ void MenuFunctions::main(uint32_t currentTime)
       for (uint8_t b = 0; b < current_menu->list->size(); b++) {
         display_obj.tft.setFreeFont(MENU_FONT);
         if (display_obj.key[b].justPressed()) {
-          //display_obj.key[b].drawButton2(current_menu->list->get(b).name, true);  // draw invert
-          //display_obj.key[b].drawButton(ML_DATUM, BUTTON_PADDING, current_menu->list->get(b).name, true);
           display_obj.key[b].drawButton(true, current_menu->list->get(b).name);
           if (current_menu->list->get(b).name != text09)
             display_obj.tft.drawXBitmap(0,
@@ -992,14 +1043,10 @@ void MenuFunctions::main(uint32_t currentTime)
                                         current_menu->list->get(b).color,
                                         TFT_BLACK);
         }
-        //else if (pressed)
-        //  display_obj.key[b].drawButton(false, current_menu->list->get(b).name);
   
         // If button was just release, execute the button's function
         if ((display_obj.key[b].justReleased()) && (!pressed))
         {
-          //display_obj.key[b].drawButton2(current_menu->list->get(b).name);     // draw normal
-          //display_obj.key[b].drawButton(ML_DATUM, BUTTON_PADDING, current_menu->list->get(b).name);
           display_obj.key[b].drawButton(false, current_menu->list->get(b).name);
           current_menu->list->get(b).callable();
         }
@@ -1230,10 +1277,14 @@ void MenuFunctions::updateStatusBar()
   MenuFunctions::battery(false);
 
   // Draw SD info
-  if (sd_obj.supported)
-    the_color = TFT_GREEN;
-  else
+  #ifndef WRITE_PACKETS_SERIAL
+    if (sd_obj.supported)
+      the_color = TFT_GREEN;
+    else
+      the_color = TFT_RED;
+  #else
     the_color = TFT_RED;
+  #endif
 
   #ifndef MARAUDER_MINI
     display_obj.tft.drawXBitmap(170,
@@ -1316,10 +1367,14 @@ void MenuFunctions::drawStatusBar()
   MenuFunctions::battery2(true);
 
   // Draw SD info
-  if (sd_obj.supported)
-    the_color = TFT_GREEN;
-  else
+  #ifndef WRITE_PACKETS_SERIAL
+    if (sd_obj.supported)
+      the_color = TFT_GREEN;
+    else
+      the_color = TFT_RED;
+  #else
     the_color = TFT_RED;
+  #endif
 
   #ifndef MARAUDER_MINI
     display_obj.tft.drawXBitmap(170,
@@ -1565,11 +1620,11 @@ void MenuFunctions::RunSetup()
     this->drawStatusBar();
     wifi_scan_obj.StartScan(WIFI_SCAN_PWN, TFT_RED);
   });
-  addNodes(&wifiSnifferMenu, text_table1[48], TFT_ORANGE, NULL, ESPRESSIF, [this]() {
+  /*addNodes(&wifiSnifferMenu, text_table1[48], TFT_ORANGE, NULL, ESPRESSIF, [this]() {
     display_obj.clearScreen();
     this->drawStatusBar();
     wifi_scan_obj.StartScan(WIFI_SCAN_ESPRESSIF, TFT_ORANGE);
-  });
+  });*/
   addNodes(&wifiSnifferMenu, text_table1[49], TFT_MAGENTA, NULL, BEACON_SNIFF, [this]() {
     display_obj.clearScreen();
     this->drawStatusBar();
@@ -1580,6 +1635,11 @@ void MenuFunctions::RunSetup()
     this->drawStatusBar();
     wifi_scan_obj.StartScan(WIFI_SCAN_RAW_CAPTURE, TFT_WHITE);
   });
+  addNodes(&wifiSnifferMenu, text_table1[59], TFT_ORANGE, NULL, PACKET_MONITOR, [this]() {
+    display_obj.clearScreen();
+    this->drawStatusBar();
+    wifi_scan_obj.StartScan(WIFI_SCAN_STATION, TFT_WHITE);
+  });
 
   // Build WiFi attack menu
   wifiAttackMenu.parentMenu = &wifiMenu; // Main Menu is second menu parent
@@ -1616,6 +1676,11 @@ void MenuFunctions::RunSetup()
     this->drawStatusBar();
     wifi_scan_obj.StartScan(WIFI_ATTACK_AP_SPAM, TFT_MAGENTA);
   });
+  addNodes(&wifiAttackMenu, text_table1[62], TFT_RED, NULL, DEAUTH_SNIFF, [this]() {
+    display_obj.clearScreen();
+    this->drawStatusBar();
+    wifi_scan_obj.StartScan(WIFI_ATTACK_DEAUTH_TARGETED, TFT_ORANGE);
+  });
   //addNodes(&wifiAttackMenu, "AP Mimic Flood", TFT_PURPLE, NULL, DEAUTH_SNIFF, [this]() {
   //  display_obj.clearScreen();
   //  this->drawStatusBar();
@@ -1659,6 +1724,10 @@ void MenuFunctions::RunSetup()
     changeMenu(&clearAPsMenu);
     wifi_scan_obj.RunClearAPs();
   });
+  addNodes(&wifiGeneralMenu, text_table1[60], TFT_BLUE, NULL, CLEAR_ICO, [this]() {
+    changeMenu(&clearAPsMenu);
+    wifi_scan_obj.RunClearStations();
+  });
   #ifndef MARAUDER_MINI
     // Select APs on OG
     addNodes(&wifiGeneralMenu, text_table1[56], TFT_NAVY, NULL, KEYBOARD_ICO, [this](){
@@ -1667,6 +1736,12 @@ void MenuFunctions::RunSetup()
       wifi_scan_obj.StartScan(LV_ADD_SSID, TFT_RED);  
       addAPGFX();
     });
+    addNodes(&wifiGeneralMenu, text_table1[61], TFT_LIGHTGREY, NULL, KEYBOARD_ICO, [this](){
+      display_obj.clearScreen(); 
+      wifi_scan_obj.currentScanMode = LV_ADD_SSID; 
+      wifi_scan_obj.StartScan(LV_ADD_SSID, TFT_RED);  
+      addStationGFX();
+    });
   #else
     // Select APs on Mini
     addNodes(&wifiGeneralMenu, text_table1[56], TFT_NAVY, NULL, KEYBOARD_ICO, [this](){
@@ -1879,10 +1954,12 @@ void MenuFunctions::RunSetup()
     changeMenu(&updateMenu);
     web_obj.setupOTAupdate();
   });
-  if (sd_obj.supported) addNodes(&whichUpdateMenu, text_table1[40], TFT_MAGENTA, NULL, SD_UPDATE, [this]() {
-    wifi_scan_obj.currentScanMode = OTA_UPDATE;
-    changeMenu(&confirmMenu);
-  });
+  #ifndef WRITE_PACKETS_SERIAL
+    if (sd_obj.supported) addNodes(&whichUpdateMenu, text_table1[40], TFT_MAGENTA, NULL, SD_UPDATE, [this]() {
+      wifi_scan_obj.currentScanMode = OTA_UPDATE;
+      changeMenu(&confirmMenu);
+    });
+  #endif
   addNodes(&whichUpdateMenu, text_table1[41], TFT_RED, NULL, ESP_UPDATE_ICO, [this]() {
     wifi_scan_obj.currentScanMode = ESP_UPDATE;
     changeMenu(&espUpdateMenu);

esp32_marauder/MenuFunctions.h

@@ -93,6 +93,7 @@ PROGMEM static void write_bad_usb_keyboard_event_cb(lv_obj_t * keyboard, lv_even
 PROGMEM static void load_btn_cb(lv_obj_t * load_btn, lv_event_t event);
 PROGMEM static void test_btn_cb(lv_obj_t * load_btn, lv_event_t event);
 PROGMEM static void ap_list_cb(lv_obj_t * btn, lv_event_t event);
+PROGMEM static void station_list_cb(lv_obj_t * btn, lv_event_t event);
 PROGMEM static void setting_dropdown_cb(lv_obj_t * btn, lv_event_t event);
 PROGMEM static void save_as_keyboard_event_cb(lv_obj_t * keyboard, lv_event_t event);
 
@@ -167,8 +168,6 @@ class MenuFunctions
     Menu shutdownWiFiMenu;
     Menu shutdownBLEMenu;
     Menu generateSSIDsMenu;
-    Menu clearSSIDsMenu;
-    Menu clearAPsMenu;
 
     static void lv_tick_handler();
 
@@ -192,6 +191,8 @@ class MenuFunctions
     MenuFunctions();
 
     Menu* current_menu;
+    Menu clearSSIDsMenu;
+    Menu clearAPsMenu;
 
     Ticker tick;
 
@@ -205,6 +206,7 @@ class MenuFunctions
     void joinWiFiGFX();
     void addSSIDGFX();
     void addAPGFX();
+    void addStationGFX();
     void displaySettingsGFX();
     void writeBadUSB();
 

esp32_marauder/SDInterface.cpp

@@ -77,7 +77,8 @@ void SDInterface::addPacket(uint8_t* buf, uint32_t len) {
 
 void SDInterface::openCapture(String file_name) {
   if (this->supported)
-    buffer_obj.open(&SD, file_name);
+    buffer_obj.createPcapFile(&SD, file_name);
+    buffer_obj.open();
 }
 
 void SDInterface::runUpdate() {
@@ -97,7 +98,7 @@ void SDInterface::runUpdate() {
         display_obj.tft.setTextColor(TFT_RED);
         display_obj.tft.println(F(text_table2[0]));
       #endif
-      Serial.println(F("Error, update.bin is not a file"));
+      Serial.println(F("Error, could not find \"update.bin\""));
       #ifdef HAS_SCREEN
         display_obj.tft.setTextColor(TFT_WHITE);
       #endif
@@ -111,7 +112,7 @@ void SDInterface::runUpdate() {
       #ifdef HAS_SCREEN
         display_obj.tft.println(F(text_table2[1]));
       #endif
-      Serial.println(F("Try to start update"));
+      Serial.println(F("Starting update over SD. Please wait..."));
       this->performUpdate(updateBin, updateSize);
     }
     else {

esp32_marauder/WiFiScan.h

@@ -31,6 +31,7 @@
 #include "settings.h"
 #include "Assets.h"
 #include "flipperLED.h"
+#include "LedInterface.h"
 //#include "MenuFunctions.h"
 
 #define bad_list_length 3
@@ -64,6 +65,9 @@
 #define WIFI_SCAN_ACTIVE_EAPOL 23
 #define WIFI_ATTACK_DEAUTH_MANUAL 24
 #define WIFI_SCAN_RAW_CAPTURE 25
+#define WIFI_SCAN_STATION 26
+#define WIFI_ATTACK_DEAUTH_TARGETED 27
+#define WIFI_SCAN_ACTIVE_LIST_EAPOL 28
 
 #define GRAPH_REFRESH 100
 
@@ -78,12 +82,14 @@ extern BatteryInterface battery_obj;
 extern TemperatureInterface temp_obj;
 extern Settings settings_obj;
 extern flipperLED flipper_led;
+extern LedInterface led_obj;
 
 esp_err_t esp_wifi_80211_tx(wifi_interface_t ifx, const void *buffer, int len, bool en_sys_seq);
 //int ieee80211_raw_frame_sanity_check(int32_t arg, int32_t arg2, int32_t arg3);
 
 struct ssid {
   String essid;
+  int channel;
   int bssid[6];
   bool selected;
 };
@@ -95,6 +101,12 @@ struct AccessPoint {
   bool selected;
   LinkedList<char>* beacon;
   int rssi;
+  LinkedList<int>* stations;
+};
+
+struct Station {
+  uint8_t mac[6];
+  bool selected;
 };
 
 class WiFiScan
@@ -237,6 +249,7 @@ class WiFiScan
     void sendProbeAttack(uint32_t currentTime);
     void sendDeauthAttack(uint32_t currentTime, String dst_mac_str = "ff:ff:ff:ff:ff:ff");
     void sendDeauthFrame(uint8_t bssid[6], int channel, String dst_mac_str = "ff:ff:ff:ff:ff:ff");
+    void sendDeauthFrame(int bssid[6], int channel, uint8_t mac[6]);
     void broadcastRandomSSID(uint32_t currentTime);
     void broadcastCustomBeacon(uint32_t current_time, ssid custom_ssid);
     void broadcastCustomBeacon(uint32_t current_time, AccessPoint custom_ssid);
@@ -252,6 +265,7 @@ class WiFiScan
     void RunPwnScan(uint8_t scan_mode, uint16_t color);
     void RunBeaconScan(uint8_t scan_mode, uint16_t color);
     void RunRawScan(uint8_t scan_mode, uint16_t color);
+    void RunStationScan(uint8_t scan_mode, uint16_t color);
     void RunDeauthScan(uint8_t scan_mode, uint16_t color);
     void RunEapolScan(uint8_t scan_mode, uint16_t color);
     void RunProbeScan(uint8_t scan_mode, uint16_t color);
@@ -289,11 +303,13 @@ class WiFiScan
     //lv_obj_t * scr = lv_cont_create(NULL, NULL);
 
     wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT(); 
+    wifi_config_t ap_config;
 
     char* stringToChar(String string);
     void RunSetup();
     int clearSSIDs();
     int clearAPs();
+    int clearStations();
     bool addSSID(String essid);
     int generateSSIDs(int count = 20);
     bool shutdownWiFi();
@@ -311,6 +327,7 @@ class WiFiScan
     void RunGenerateSSIDs(int count = 20);
     void RunClearSSIDs();
     void RunClearAPs();
+    void RunClearStations();
     void channelHop();
     uint8_t currentScanMode = 0;
     void main(uint32_t currentTime);
@@ -322,6 +339,7 @@ class WiFiScan
     static void pwnSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void beaconSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void rawSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
+    static void stationSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void apSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void apSnifferCallbackFull(void* buf, wifi_promiscuous_pkt_type_t type);
     static void deauthSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
@@ -330,5 +348,6 @@ class WiFiScan
     static void activeEapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void eapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void wifiSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
+    static void addPacket(wifi_promiscuous_pkt_t *snifferPacket, int len);
 };
 #endif

esp32_marauder/configs.h

@@ -3,6 +3,10 @@
   #define configs_h
 
   #define POLISH_POTATO
+
+  //Indicates that it must redirect the stream with the captured packets to serial (1)
+  //If not defined, will write packages to SD card if supported
+  //#define WRITE_PACKETS_SERIAL
   
   //#define MARAUDER_MINI
   //#define MARAUDER_V4
@@ -10,8 +14,10 @@
   //#define MARAUDER_KIT
   //#define GENERIC_ESP32
   #define MARAUDER_FLIPPER
+  //#define ESP32_LDDB
+  //#define MARAUDER_DEV_BOARD_PRO
 
-  #define MARAUDER_VERSION "v0.9.18"
+  #define MARAUDER_VERSION "v0.10.4"
 
   //// BUTTON DEFINITIONS
   #ifdef MARAUDER_MINI
@@ -353,6 +359,14 @@
   #ifdef MARAUDER_FLIPPER
     #define SD_CS 10
   #endif
+
+  #ifdef ESP32_LDDB
+    #define SD_CS 4
+  #endif
+
+  #ifdef MARAUDER_DEV_BOARD_PRO
+    #define SD_CS 4
+  #endif
   //// END SD DEFINITIONS
 
   //// SCREEN STUFF
@@ -403,4 +417,14 @@
   #endif
   //// END SCREEN STUFF
 
+  //// NEOPIXEL STUFF  
+  #if defined(ESP32_LDDB)
+    #define PIN 17
+  #elif defined(MARAUDER_DEV_BOARD_PRO)
+    #define PIN 16
+  #else
+    #define PIN 25
+  #endif
+  
+
 #endif

esp32_marauder/esp32_marauder.ino

@@ -129,8 +129,11 @@ void setup()
   delay(10);
 
   Serial.begin(115200);
-  
-  //Serial.begin(115200);
+
+  #ifdef WRITE_PACKETS_SERIAL
+    // Starts a second serial channel to stream the captured packets
+    Serial1.begin(115200);
+  #endif
 
   //Serial.println("\n\nHello, World!\n");
 
@@ -142,10 +145,6 @@ void setup()
   //  Serial.println("Does not have screen");
   //#endif
 
-  #ifdef MARAUDER_FLIPPER
-    flipper_led.RunSetup();
-  #endif
-
   #ifdef HAS_SCREEN
     display_obj.RunSetup();
     display_obj.tft.setTextColor(TFT_WHITE, TFT_BLACK);
@@ -191,6 +190,10 @@ void setup()
 
   settings_obj.begin();
 
+  #ifdef MARAUDER_FLIPPER
+    flipper_led.RunSetup();
+  #endif
+
   //Serial.println("This is a test Channel: " + (String)settings_obj.loadSetting<uint8_t>("Channel"));
   //if (settings_obj.loadSetting<bool>( "Force PMKID"))
   //  Serial.println("This is a test Force PMKID: true");
@@ -205,21 +208,23 @@ void setup()
     display_obj.tft.println(F(text_table0[2]));
   #endif
 
-  // Do some SD stuff
-  if(sd_obj.initSD()) {
-    //Serial.println(F("SD Card supported"));
-    #ifdef HAS_SCREEN
-      display_obj.tft.println(F(text_table0[3]));
-    #endif
-  }
-  else {
-    Serial.println(F("SD Card NOT Supported"));
-    #ifdef HAS_SCREEN
-      display_obj.tft.setTextColor(TFT_RED, TFT_BLACK);
-      display_obj.tft.println(F(text_table0[4]));
-      display_obj.tft.setTextColor(TFT_CYAN, TFT_BLACK);
-    #endif
-  }
+  #ifdef WRITE_PACKETS_SERIAL
+    buffer_obj = Buffer();
+  #else
+    // Do some SD stuff
+    if(sd_obj.initSD()) {
+      #ifdef HAS_SCREEN
+        display_obj.tft.println(F(text_table0[3]));
+      #endif
+    } else {
+      Serial.println(F("SD Card NOT Supported"));
+      #ifdef HAS_SCREEN
+        display_obj.tft.setTextColor(TFT_RED, TFT_BLACK);
+        display_obj.tft.println(F(text_table0[4]));
+        display_obj.tft.setTextColor(TFT_CYAN, TFT_BLACK);
+      #endif
+    }
+  #endif
 
   battery_obj.RunSetup();
 
@@ -303,7 +308,13 @@ void loop()
       display_obj.main(wifi_scan_obj.currentScanMode);
     #endif
     wifi_scan_obj.main(currentTime);
-    sd_obj.main();
+
+    #ifdef WRITE_PACKETS_SERIAL
+      buffer_obj.forceSaveSerial();
+    #else
+      sd_obj.main();
+    #endif
+
     #ifndef MARAUDER_FLIPPER
       battery_obj.main(currentTime);
       temp_obj.main(currentTime);
@@ -314,6 +325,9 @@ void loop()
       #ifdef HAS_SCREEN
         menu_function_obj.main(currentTime);
       #endif
+      #ifndef MARAUDER_FLIPPER
+        led_obj.main(currentTime);
+      #endif
       //cli_obj.main(currentTime);
     }
       if (wifi_scan_obj.currentScanMode == OTA_UPDATE)
@@ -336,6 +350,9 @@ void loop()
       display_obj.main(wifi_scan_obj.currentScanMode);
       menu_function_obj.main(currentTime);
     #endif
+    #ifndef MARAUDER_FLIPPER
+      led_obj.main(currentTime);
+    #endif
     //cli_obj.main(currentTime);
     delay(1);
   }

esp32_marauder/flipperLED.cpp

@@ -5,6 +5,13 @@ void flipperLED::RunSetup() {
   pinMode(G_PIN, OUTPUT);
   pinMode(R_PIN, OUTPUT);
 
+  if (!settings_obj.loadSetting<bool>("EnableLED")) {
+    digitalWrite(B_PIN, HIGH);
+    digitalWrite(G_PIN, HIGH);
+    digitalWrite(R_PIN, HIGH);
+    return;
+  }
+    
   delay(50);
 
   digitalWrite(B_PIN, LOW);
@@ -19,14 +26,20 @@ void flipperLED::RunSetup() {
 }
 
 void flipperLED::attackLED() {
+  if (!settings_obj.loadSetting<bool>("EnableLED"))
+    return;
+    
   digitalWrite(B_PIN, HIGH);
   digitalWrite(G_PIN, HIGH);
-  digitalWrite(R_PIN, HIGH);
+  digitalWrite(R_PIN, HIGH); 
   delay(10);
   digitalWrite(R_PIN, LOW);
 }
 
 void flipperLED::sniffLED() {
+  if (!settings_obj.loadSetting<bool>("EnableLED"))
+    return;
+    
   digitalWrite(B_PIN, HIGH);
   digitalWrite(G_PIN, HIGH);
   digitalWrite(R_PIN, HIGH);
@@ -35,6 +48,9 @@ void flipperLED::sniffLED() {
 }
 
 void flipperLED::offLED() {
+  if (!settings_obj.loadSetting<bool>("EnableLED"))
+    return;
+    
   digitalWrite(B_PIN, HIGH);
   digitalWrite(G_PIN, HIGH);
   digitalWrite(R_PIN, HIGH);

esp32_marauder/flipperLED.h

@@ -1,12 +1,17 @@
 #ifndef flipperLED_h
 #define flipperLED_h
 
+#include "configs.h"
+#include "settings.h"
+
 #include <Arduino.h>
 
 #define B_PIN 4
 #define G_PIN 5
 #define R_PIN 6
 
+extern Settings settings_obj;
+
 class flipperLED {
 
   public:

esp32_marauder/lang_var.h

@@ -97,6 +97,10 @@ PROGMEM const char text1_55[] = "Join WiFi";
 PROGMEM const char text1_56[] = "Select APs";
 PROGMEM const char text1_57[] = "AP Clone Spam";
 PROGMEM const char text1_58[] = "Raw Capture";
+PROGMEM const char text1_59[] = "Station Sniff";
+PROGMEM const char text1_60[] = "Clear Stations";
+PROGMEM const char text1_61[] = "Select Stations";
+PROGMEM const char text1_62[] = "Deauth Targeted";
 
 
 //SDInterface.cpp texts
@@ -170,12 +174,16 @@ PROGMEM const char text4_41[] = " Bluetooth Sniff ";
 PROGMEM const char text4_42[] = " Detect Card Skimmers ";
 PROGMEM const char text4_43[] = "Scanning for\nBluetooth-enabled skimmers\nHC-03, HC-05, and HC-06...";
 PROGMEM const char text4_44[] = " AP Scan ";
+PROGMEM const char text4_45[] = "Clearing Stations...";
+PROGMEM const char text4_46[] = "Stations Cleared: ";
+PROGMEM const char text4_47[] = "Targeted Deauth";
+PROGMEM const char text4_48[] = "Using serial to transmit packets";
 
 //Making tables
 PROGMEM const char *text_table0[] = {text0_0,text0_1, text0_2, text0_3, text0_4, text0_5, text0_6, text0_7, text0_8};
-PROGMEM const char *text_table1[] = {text1_0,text1_1,text1_2,text1_3,text1_4,text1_5,text1_6,text1_7,text1_8,text1_9,text1_10,text1_11,text1_12,text1_13,text1_14,text1_15,text1_16,text1_17,text1_18,text1_19,text1_20,text1_21,text1_22,text1_23,text1_24,text1_25,text1_26,text1_27,text1_28,text1_29,text1_30,text1_31,text1_32,text1_33,text1_34,text1_35,text1_36,text1_37,text1_38,text1_39,text1_40,text1_41,text1_42,text1_43,text1_44,text1_45,text1_46,text1_47,text1_48,text1_49,text1_50,text1_51,text1_52,text1_53,text1_54,text1_55,text1_56,text1_57,text1_58};
+PROGMEM const char *text_table1[] = {text1_0,text1_1,text1_2,text1_3,text1_4,text1_5,text1_6,text1_7,text1_8,text1_9,text1_10,text1_11,text1_12,text1_13,text1_14,text1_15,text1_16,text1_17,text1_18,text1_19,text1_20,text1_21,text1_22,text1_23,text1_24,text1_25,text1_26,text1_27,text1_28,text1_29,text1_30,text1_31,text1_32,text1_33,text1_34,text1_35,text1_36,text1_37,text1_38,text1_39,text1_40,text1_41,text1_42,text1_43,text1_44,text1_45,text1_46,text1_47,text1_48,text1_49,text1_50,text1_51,text1_52,text1_53,text1_54,text1_55,text1_56,text1_57,text1_58,text1_59,text1_60,text1_61,text1_62};
 PROGMEM const char *text_table2[] = {text2_0,text2_1,text2_2,text2_3,text2_4,text2_5,text2_6,text2_7,text2_8,text2_9,text2_10,text2_11,text2_12,text2_13,text2_14};
 PROGMEM const char *text_table3[] = {text3_0,text3_1,text3_2,text3_3,text3_4,text3_5};
-PROGMEM const char *text_table4[] = {text4_0,text4_1,text4_2,text4_3,text4_4,text4_5,text4_6,text4_7,text1_54,text4_9,text4_10,text4_11,text4_12,text4_13,text4_14,text4_15,text4_16,text4_17,text4_18,text4_19,text4_20,text4_21,text4_22,text4_23,text4_24,text4_25,text4_26,text4_27,text4_28,text4_29,text4_30,text4_31,text4_32,text4_33,text4_34,text4_35,text4_36,text4_37,text4_38,text4_39,text4_40,text4_41,text4_42,text4_43,text4_44};
+PROGMEM const char *text_table4[] = {text4_0,text4_1,text4_2,text4_3,text4_4,text4_5,text4_6,text4_7,text1_54,text4_9,text4_10,text4_11,text4_12,text4_13,text4_14,text4_15,text4_16,text4_17,text4_18,text4_19,text4_20,text4_21,text4_22,text4_23,text4_24,text4_25,text4_26,text4_27,text4_28,text4_29,text4_30,text4_31,text4_32,text4_33,text4_34,text4_35,text4_36,text4_37,text4_38,text4_39,text4_40,text4_41,text4_42,text4_43,text4_44,text4_45,text4_46,text4_47, text4_48};
 
 #endif