Merge pull request #840 from justcallmekoko/develop

Merge develop into master

.github/workflows/build_parallel.yml

@@ -18,7 +18,7 @@ jobs:
       matrix:
         board:
           - { name: "Flipper Zero WiFi Dev Board",   flag: "MARAUDER_FLIPPER",         fbqn: "esp32:esp32:esp32s2:PartitionScheme=min_spiffs,FlashSize=4M,PSRAM=enabled",                     file_name: "flipper",                 tft: false, tft_file: "",                                   build_dir: "esp32s2",                    addr: "0x1000" }
-          - { name: "Flipper Zero Multi Board",      flag: "MARAUDER_FLIPPER",         fbqn: "esp32:esp32:esp32s3:PartitionScheme=min_spiffs,FlashSize=8M,PSRAM=enabled",                     file_name: "multiboardS3",            tft: false, tft_file: "",                                   build_dir: "esp32s3",                    addr: "0x0" }
+          - { name: "Flipper Zero Multi Board S3",   flag: "MARAUDER_MULTIBOARD_S3",   fbqn: "esp32:esp32:esp32s3:PartitionScheme=min_spiffs,FlashSize=4M",                                   file_name: "multiboardS3",            tft: false, tft_file: "",                                   build_dir: "esp32s3",                    addr: "0x0" }
           - { name: "OG Marauder",                   flag: "MARAUDER_V4",              fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs",                                                    file_name: "og",                      tft: true,  tft_file: "User_Setup_og_marauder.h",           build_dir: "d32",                        addr: "0x1000" }
           - { name: "Marauder v6",                   flag: "MARAUDER_V6",              fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs",                                                    file_name: "v6",                      tft: true,  tft_file: "User_Setup_og_marauder.h",           build_dir: "d32",                        addr: "0x1000" }
           - { name: "Marauder v6.1",                 flag: "MARAUDER_V6_1",            fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs",                                                    file_name: "v6_1",                    tft: true,  tft_file: "User_Setup_og_marauder.h",           build_dir: "d32",                        addr: "0x1000" }
@@ -32,7 +32,9 @@ jobs:
           - { name: "Marauder v7",                   flag: "MARAUDER_V7",              fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs",                                                    file_name: "marauder_v7",             tft: true,  tft_file: "User_Setup_dual_nrf24.h",            build_dir: "d32",                        addr: "0x1000" }
           - { name: "Marauder CYD 2432S028",         flag: "MARAUDER_CYD_MICRO",       fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs",                                                    file_name: "cyd_2432S028",            tft: true,  tft_file: "User_Setup_cyd_micro.h",             build_dir: "d32",                        addr: "0x1000" }
           - { name: "Marauder CYD 2432S024 GUITION", flag: "MARAUDER_CYD_GUITION",     fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs",                                                    file_name: "cyd_2432S024_guition",    tft: true,  tft_file: "User_Setup_cyd_guition.h",           build_dir: "d32",                        addr: "0x1000" }
+          - { name: "Marauder CYD 2432S028 2 USB",   flag: "MARAUDER_CYD_2USB",        fbqn: "esp32:esp32:d32:PartitionScheme=min_spiffs",                                                    file_name: "cyd_2432S028_2usb",       tft: true,  tft_file: "User_Setup_cyd_2usb.h",              build_dir: "d32",                        addr: "0x1000" }
           - { name: "Marauder v7.1",                 flag: "MARAUDER_V7_1",            fbqn: "esp32:esp32:dfrobot_firebeetle2_esp32e:FlashSize=16M,PartitionScheme=min_spiffs,PSRAM=enabled", file_name: "marauder_v7_1",           tft: true,  tft_file: "User_Setup_dual_nrf24.h",            build_dir: "dfrobot_firebeetle2_esp32e", addr: "0x1000" }
+          - { name: "M5Cardputer",                   flag: "MARAUDER_CARDPUTER",       fbqn: "esp32:esp32:esp32s3:PartitionScheme=min_spiffs,FlashSize=8M,PSRAM=disabled",                    file_name: "m5cardputer",             tft: true,  tft_file: "User_Setup_marauder_m5cardputer.h",  build_dir: "esp32s3",                    addr: "0x1000" }
           
     steps:
       - name: Checkout Code
@@ -68,6 +70,13 @@ jobs:
         run: |
           find /home/runner/.arduino15/packages/esp32/hardware/
           
+      - name: Install ESP32Ping
+        uses: actions/checkout@v2
+        with:
+          repository: marian-craciunescu/ESP32Ping
+          ref: 1.6
+          path: CustomESP32Ping
+          
       - name: Install AsyncTCP
         uses: actions/checkout@v2
         with:
@@ -121,7 +130,7 @@ jobs:
         uses: actions/checkout@v2
         with:
           repository: h2zero/NimBLE-Arduino
-          ref: 1.3.5
+          ref: 1.3.8
           path: CustomNimBLE-Arduino
 
       - name: Install Adafruit_NeoPixel

C5_Py_Flasher/c5_flasher.py

@@ -0,0 +1,164 @@
+# === ESP32-C5 Auto Flasher Script By: AWOK ===
+
+import sys
+import subprocess
+import os
+import platform   # Placeholder for possible OS checks
+import glob
+import time
+import shutil
+import argparse
+
+def ensure_package(pkg):
+    try:
+        __import__(pkg if pkg != 'gitpython' else 'git')
+    except ImportError:
+        print(f"Installing missing package: {pkg}")
+        subprocess.check_call([sys.executable, '-m', 'pip', 'install', '--upgrade', pkg])
+
+try:
+    import serial.tools.list_ports
+except ImportError:
+    ensure_package('pyserial')
+try:
+    import esptool
+except ImportError:
+    ensure_package('esptool')
+try:
+    from colorama import Fore, Style
+except ImportError:
+    ensure_package('colorama')
+
+# Dependency check and install if needed
+REQUIRED_PACKAGES = [
+    'pyserial',
+    'esptool',
+    'colorama'
+]
+
+def ensure_requirements():
+    for pkg in REQUIRED_PACKAGES:
+        ensure_package(pkg)
+ensure_requirements()
+
+# Finds the first file from a list of possible names in the bins folder
+def find_file(name_options, bins_dir):
+    for name in name_options:
+        files = glob.glob(os.path.join(bins_dir, name))
+        if files:
+            return files[0]
+    return None
+
+def main():
+    parser = argparse.ArgumentParser(description="ESP32-C5 Auto Flasher (bins subdir)")
+    parser.parse_args()
+
+    bins_dir = os.path.join(os.path.dirname(__file__), 'bins')
+    if not os.path.isdir(bins_dir):
+        print(Fore.RED + f"Bins directory not found: {bins_dir}\nPlease create a 'bins' folder with your .bin files." + Style.RESET_ALL)
+        exit(1)
+
+    # Logo and splash, both centered and purple
+    terminal_width = shutil.get_terminal_size((100, 20)).columns
+    def center(text): return text.center(terminal_width)
+    logo_lines = [
+        "                                            @@@@@@                              ",
+        "                                @@@@@@@@  @@@@@ @@@@                            ",
+        "                               @@@    @@@@@@@     @@@     @@@@@@@@              ",
+        "                    @@@@@@@@@@@@@      @@@@@       @@@  @@@@    @@@             ",
+        "                   @@@      @@@@@       @@@         @@@@@@       @@@            ",
+        "                  @@@         @@@        @@         @@@@         @@@            ",
+        "         @@@@@@@@@@@@          @@        @          @@@         @@@     @@      ",
+        "        @@@     @@@@@           @@           @@@    @@          @@@@@@@@@@@@@@  ",
+        "       @@@         @@@           @@          @@@               @@@@@        @@@@",
+        "       @@@           @@                     @@@@              @@@            @@@",
+        "      @@@@@            @@                   @@@@                             @@@",
+        "   @@@@@@  @@                @@         @   @@@                            @@@@ ",
+        "  @@@                         @@       @@         @                     @@@@@@  ",
+        " @@@                           @@     @@@        @@            @@@@@@@@@@@@@@@  ",
+        "@@@       @@@@      @          @@@@  @@@@@     @@@        @      @@@@  @@@ @@@  ",
+        "@@@       @@@@@@@    @@@       @@@@@@@@@@@@@@@@@@@       @@        @@@ @@@      ",
+        "@@@        @@@@@ @@@  @@@@@  @@@@ @@@@  @@@@@@@@@@      @@@@        @@@         ",
+        "@@@@            @@@@@@@@@@@@@@@@  @@@   @@@ @@  @@@@@@@@@@@@         @@@        ",
+        " @@@@          @@@@@@@@@@@@@@@@   @@@       @@   @@@@@@@@@@@@        @@@        ",
+        "  @@@@@@     @@@@@   @@@     @@    @               @@  @@  @@@@    @@@@         ",
+        "   @@@@@@@@@@@@@     @@@     @@                    @@  @@   @@@@@@@@@@@         ",
+        "   @@@@@@@@@@@@      @@@     @@                   @@@  @     @@@@@@@@           ",
+        "        @@  @@                                    @@@        @@  @@@            ",
+        "        @   @@                                               @@  @@@            ",
+        "           @@@                                                   @@@            ",
+        "           @@@                                                                  ",
+        ""
+    ]
+    splash_lines = [
+        "--  ESP32 C5 Flasher --",
+        "By AWOK",
+        "Inspired from LordSkeletonMans ESP32 FZEasyFlasher",
+        "Shout out to JCMK for the inspiration on setting up the C5",
+        ""
+    ]
+    print(Fore.MAGENTA + "\n" + "\n".join(center(line) for line in logo_lines + splash_lines) + Style.RESET_ALL)
+
+    # Wait for ESP32 device to show up as a new serial port
+    existing_ports = set([port.device for port in serial.tools.list_ports.comports()])
+    print(Fore.YELLOW + "Waiting for ESP32-C5 device to be connected..." + Style.RESET_ALL)
+    while True:
+        current_ports = set([port.device for port in serial.tools.list_ports.comports()])
+        new_ports = current_ports - existing_ports
+        if new_ports:
+            serial_port = new_ports.pop()
+            break
+        time.sleep(0.5)
+    print(Fore.GREEN + f"Detected ESP32-C5 on port: {serial_port}" + Style.RESET_ALL)
+
+    # Find bin files for each firmware component
+    bootloader = find_file(['bootloader.bin'], bins_dir)
+    partitions = find_file(['partition-table.bin', 'partitions.bin'], bins_dir)
+    ota_data = find_file(['ota_data_initial.bin'], bins_dir)
+
+    # Main firmware: largest bin in the folder that's not bootloader, partition, or OTA
+    all_bins = glob.glob(os.path.join(bins_dir, "*.bin"))
+    exclude = {bootloader, partitions, ota_data}
+    firmware_bins = [f for f in all_bins if f not in exclude and os.path.isfile(f)]
+    if not firmware_bins:
+        print(Fore.RED + "No application firmware .bin file found in the 'bins' folder!" + Style.RESET_ALL)
+        exit(1)
+    app_bin = max(firmware_bins, key=lambda f: os.path.getsize(f))
+
+    # Print summary, ask for confirmation before flashing
+    print(Fore.CYAN + f"\nBootloader:   {bootloader or 'NOT FOUND'}")
+    print(f"Partitions:   {partitions or 'NOT FOUND'}")
+    print(f"OTA Data:     {ota_data or 'NOT FOUND'}")
+    print(f"App (main):   {app_bin}\n" + Style.RESET_ALL)
+    if not (bootloader and partitions):
+        print(Fore.RED + "Missing bootloader or partition table. Both are required for a complete flash!" + Style.RESET_ALL)
+        exit(1)
+    confirm = input(Fore.YELLOW + "Ready to flash these files to ESP32-C5? (y/N): " + Style.RESET_ALL)
+    if confirm.strip().lower() != 'y':
+        print("Aborting.")
+        exit(0)
+
+    # Flash using esptool, with offsets for C5
+    esptool_args = [
+        '--chip', 'esp32c5',
+        '--port', serial_port,
+        '--baud', '921600',
+        '--before', 'default_reset',
+        '--after', 'hard_reset',
+        'write_flash', '-z',
+        '0x2000', bootloader,
+        '0x8000', partitions,
+    ]
+    if ota_data:
+        esptool_args += ['0xd000', ota_data]
+    esptool_args += ['0x10000', app_bin]
+
+    print(Fore.YELLOW + "Flashing ESP32-C5 with bootloader, partition table, and application..." + Style.RESET_ALL)
+    try:
+        esptool.main(esptool_args)
+        print(Fore.GREEN + "Flashing complete!" + Style.RESET_ALL)
+    except Exception as e:
+        print(Fore.RED + f"Flashing failed: {e}" + Style.RESET_ALL)
+
+if __name__ == "__main__":
+    main()

README.md

@@ -4,7 +4,7 @@
 <!---Shields/Badges https://shields.io/--->
 
 # ESP32 Marauder
-<p align="center"><img alt="Marauder logo" src="https://github.com/justcallmekoko/ESP32Marauder/blob/master/pictures/marauder3L.jpg?raw=true" width="300"></p>
+<p align="center"><img alt="Marauder logo" src="https://github.com/justcallmekoko/ESP32Marauder/blob/master/pictures/marauder_skull_patch_04_full_final.png?raw=true" width="300"></p>
 <p align="center">
   <b>A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32</b>
   <br><br>

User_Setup_Select.h

@@ -30,8 +30,11 @@
 //#include <User_Setup_pocket_sdr.h>
 //#include <User_Setup_dual_nrf24.h>
 //#include <User_Setup_pocket_sdr_2.h>
+//#include <User_Setup_pocket_sdr_3.h>
 //#include <User_Setup_cyd_micro.h>
 //#include <User_Setup_cyd_guition.h>
+//#include <User_Setup_cyd_2usb.h>
+//#include <User_Setup_marauder_m5cardputer.h>
 
 //#include <User_Setups/Setup1_ILI9341.h>  // Setup file configured for my ILI9341
 //#include <User_Setups/Setup2_ST7735.h>   // Setup file configured for my ST7735

User_Setup_cyd_2usb.h

@@ -0,0 +1,316 @@
+//                            USER DEFINED SETTINGS
+//   Set driver type, fonts to be loaded, pins used and SPI control method etc
+//
+//   See the User_Setup_Select.h file if you wish to be able to define multiple
+//   setups and then easily select which setup file is used by the compiler.
+//
+//   If this file is edited correctly then all the library example sketches should
+//   run without the need to make any more changes for a particular hardware setup!
+//   Note that some sketches are designed for a particular TFT pixel width/height
+
+
+// ##################################################################################
+//
+// Section 1. Call up the right driver file and any options for it
+//
+// ##################################################################################
+
+// Display type -  only define if RPi display
+//#define RPI_DRIVER
+
+// Only define one driver, the other ones must be commented out
+//#define ILI9341_DRIVER // OG Marauder
+//#define ST7735_DRIVER    // Marauder Mini  // Define additional parameters below for this display
+//#define ILI9163_DRIVER     // Define additional parameters below for this display
+//#define S6D02A1_DRIVER
+//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
+//#define HX8357D_DRIVER
+//#define ILI9481_DRIVER
+//#define ILI9486_DRIVER
+//#define ILI9488_DRIVER     // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
+#define ST7789_DRIVER      // Full configuration option, define additional parameters below for this display
+//#define ST7789_2_DRIVER    // Minimal configuration option, define additional parameters below for this display
+//#define R61581_DRIVER
+//#define RM68140_DRIVER
+//#define ST7796_DRIVER
+
+// Some displays support SPI reads via the MISO pin, other displays have a single
+// bi-directional SDA pin and the library will try to read this via the MOSI line.
+// To use the SDA line for reading data from the TFT uncomment the following line:
+
+// #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
+
+// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
+// Try ONE option at a time to find the correct colour order for your display
+
+//  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
+
+// #define M5STACK
+
+// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation
+// #define TFT_WIDTH  80
+// #define TFT_WIDTH  128 // Marauder Mini
+ #define TFT_WIDTH  240 // ST7789 240 x 240 and 240 x 320
+// #define TFT_HEIGHT 160
+// #define TFT_HEIGHT 128 // Marauder Mini
+// #define TFT_HEIGHT 240 // ST7789 240 x 240
+ #define TFT_HEIGHT 320 // ST7789 240 x 320
+
+// For ST7735 ONLY, define the type of display, originally this was based on the
+// colour of the tab on the screen protector film but this is not always true, so try
+// out the different options below if the screen does not display graphics correctly,
+// e.g. colours wrong, mirror images, or tray pixels at the edges.
+// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
+// this User_Setup file, then rebuild and upload the sketch to the board again:
+
+// #define ST7735_INITB
+// #define ST7735_GREENTAB
+// #define ST7735_GREENTAB2
+// #define ST7735_GREENTAB3
+// #define ST7735_GREENTAB128    // For 128 x 128 display
+// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
+// #define ST7735_REDTAB
+// #define ST7735_BLACKTAB
+// #define ST7735_REDTAB160x80   // For 160 x 80 display with 24 pixel offset
+
+// If colours are inverted (white shows as black) then uncomment one of the next
+// 2 lines try both options, one of the options should correct the inversion.
+
+// #define TFT_INVERSION_ON
+ #define TFT_INVERSION_OFF
+
+// If a backlight control signal is available then define the TFT_BL pin in Section 2
+// below. The backlight will be turned ON when tft.begin() is called, but the library
+// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
+// driven with a PWM signal or turned OFF/ON then this must be handled by the user
+// sketch. e.g. with digitalWrite(TFT_BL, LOW);
+
+// #define TFT_BACKLIGHT_ON LOW  // HIGH or LOW are options
+
+// ##################################################################################
+//
+// Section 2. Define the pins that are used to interface with the display here
+//
+// ##################################################################################
+
+// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
+// Typical setup for ESP8266 NodeMCU ESP-12 is :
+//
+// Display SDO/MISO  to NodeMCU pin D6 (or leave disconnected if not reading TFT)
+// Display LED       to NodeMCU pin VIN (or 5V, see below)
+// Display SCK       to NodeMCU pin D5
+// Display SDI/MOSI  to NodeMCU pin D7
+// Display DC (RS/AO)to NodeMCU pin D3
+// Display RESET     to NodeMCU pin D4 (or RST, see below)
+// Display CS        to NodeMCU pin D8 (or GND, see below)
+// Display GND       to NodeMCU pin GND (0V)
+// Display VCC       to NodeMCU 5V or 3.3V
+//
+// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
+//
+// The DC (Data Command) pin may be labeled AO or RS (Register Select)
+//
+// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
+// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
+// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
+// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
+//
+// The NodeMCU D0 pin can be used for RST
+//
+//
+// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin
+// If 5V is not available at a pin you can use 3.3V but backlight brightness
+// will be lower.
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ######
+
+// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
+//#define TFT_CS   PIN_D8  // Chip select control pin D8
+//#define TFT_DC   PIN_D3  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1    // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+//#define TFT_BL PIN_D1  // LED back-light (only for ST7789 with backlight control pin)
+
+//#define TOUCH_CS PIN_D2     // Chip select pin (T_CS) of touch screen
+
+//#define TFT_WR PIN_D2       // Write strobe for modified Raspberry Pi TFT only
+
+
+// ######  FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES  ######
+
+// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact
+// but saves pins for other functions. It is best not to connect MISO as some displays
+// do not tristate that line wjen chip select is high!
+// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode
+// On NodeMCU V3  S0 =MISO, S1 =MOSI, S2 =SCLK
+// In ESP8266 overlap mode the following must be defined
+
+//#define TFT_SPI_OVERLAP
+
+// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3
+//#define TFT_CS   PIN_D3
+//#define TFT_DC   PIN_D5  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP   ######
+
+// For ESP32 Dev board (only tested with ILI9341 display)
+// The hardware SPI can be mapped to any pins
+
+// Marauder Mini
+/*
+#define TFT_CS   17  // Chip select control pin D8
+#define TFT_DC   16  // Data Command control pin
+#define TFT_RST  5  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_BL   32
+*/
+
+// ESP32 Marauder 
+#define TFT_MISO 12
+#define TFT_MOSI 13
+#define TFT_SCLK 14
+#define TFT_CS   15  // Chip select control pin
+#define TFT_DC   2  // Data Command control pin
+#define TFT_RST   -1  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   21  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS   33     // Chip select pin (T_CS) of touch screen
+
+/////////////////////////////
+
+// ESP32 Centauri
+/*
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   27  // Chip select control pin
+#define TFT_DC   26  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+//#define TFT_WR 22    // Write strobe for modified Raspberry Pi TFT only
+
+// For the M5Stack module use these #define lines
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_CS   14  // Chip select control pin
+//#define TFT_DC   27  // Data Command control pin
+//#define TFT_RST  33  // Reset pin (could connect to Arduino RESET pin)
+//#define TFT_BL   32  // LED back-light (required for M5Stack)
+
+// ######       EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP        ######
+
+// The library supports 8 bit parallel TFTs with the ESP32, the pin
+// selection below is compatible with ESP32 boards in UNO format.
+// Wemos D32 boards need to be modified, see diagram in Tools folder.
+// Only ILI9481 and ILI9341 based displays have been tested!
+
+// Parallel bus is only supported on ESP32
+// Uncomment line below to use ESP32 Parallel interface instead of SPI
+
+//#define ESP32_PARALLEL
+
+// The ESP32 and TFT the pins used for testing are:
+//#define TFT_CS   33  // Chip select control pin (library pulls permanently low
+//#define TFT_DC   15  // Data Command control pin - must use a pin in the range 0-31
+//#define TFT_RST  32  // Reset pin, toggles on startup
+
+//#define TFT_WR    4  // Write strobe control pin - must use a pin in the range 0-31
+//#define TFT_RD    2  // Read strobe control pin
+
+//#define TFT_D0   12  // Must use pins in the range 0-31 for the data bus
+//#define TFT_D1   13  // so a single register write sets/clears all bits.
+//#define TFT_D2   26  // Pins can be randomly assigned, this does not affect
+//#define TFT_D3   25  // TFT screen update performance.
+//#define TFT_D4   17
+//#define TFT_D5   16
+//#define TFT_D6   27
+//#define TFT_D7   14
+
+
+// ##################################################################################
+//
+// Section 3. Define the fonts that are to be used here
+//
+// ##################################################################################
+
+// Comment out the #defines below with // to stop that font being loaded
+// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
+// normally necessary. If all fonts are loaded the extra FLASH space required is
+// about 17Kbytes. To save FLASH space only enable the fonts you need!
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
+// this will save ~20kbytes of FLASH
+#define SMOOTH_FONT
+
+
+// ##################################################################################
+//
+// Section 4. Other options
+//
+// ##################################################################################
+
+// Define the SPI clock frequency, this affects the graphics rendering speed. Too
+// fast and the TFT driver will not keep up and display corruption appears.
+// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
+// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
+// With an ILI9163 display 27 MHz works OK.
+
+// #define SPI_FREQUENCY   1000000
+//#define SPI_FREQUENCY   5000000
+// #define SPI_FREQUENCY  10000000
+// #define SPI_FREQUENCY  20000000
+#define SPI_FREQUENCY  27000000 // Marauder // Actually sets it to 26.67MHz = 80/3
+// #define SPI_FREQUENCY  40000000
+// #define SPI_FREQUENCY  80000000
+
+// Optional reduced SPI frequency for reading TFT
+#define SPI_READ_FREQUENCY  20000000
+
+// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
+// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
+// then uncomment the following line:
+#define USE_HSPI_PORT
+
+// Comment out the following #define if "SPI Transactions" do not need to be
+// supported. When commented out the code size will be smaller and sketches will
+// run slightly faster, so leave it commented out unless you need it!
+
+// Transaction support is needed to work with SD library but not needed with TFT_SdFat
+// Transaction support is required if other SPI devices are connected.
+
+// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
+// so changing it here has no effect
+
+// #define SUPPORT_TRANSACTIONS

User_Setup_marauder_m5cardputer.h

@@ -0,0 +1,328 @@
+//                            USER DEFINED SETTINGS
+//   Set driver type, fonts to be loaded, pins used and SPI control method etc
+//
+//   See the User_Setup_Select.h file if you wish to be able to define multiple
+//   setups and then easily select which setup file is used by the compiler.
+//
+//   If this file is edited correctly then all the library example sketches should
+//   run without the need to make any more changes for a particular hardware setup!
+//   Note that some sketches are designed for a particular TFT pixel width/height
+
+
+// ##################################################################################
+//
+// Section 1. Call up the right driver file and any options for it
+//
+// ##################################################################################
+
+// Display type -  only define if RPi display
+//#define RPI_DRIVER
+
+#define CGRAM_OFFSET
+
+// Only define one driver, the other ones must be commented out
+//#define ILI9341_DRIVER // OG Marauder
+//#define ST7735_DRIVER    // Marauder Mini  // Define additional parameters below for this display
+//#define ILI9163_DRIVER     // Define additional parameters below for this display
+//#define S6D02A1_DRIVER
+//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
+//#define HX8357D_DRIVER
+//#define ILI9481_DRIVER
+//#define ILI9486_DRIVER
+//#define ILI9488_DRIVER     // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
+//#define ST7789_DRIVER      // Full configuration option, define additional parameters below for this display
+#define ST7789_2_DRIVER    // Minimal configuration option, define additional parameters below for this display
+//#define R61581_DRIVER
+//#define RM68140_DRIVER
+//#define ST7796_DRIVER
+
+// Some displays support SPI reads via the MISO pin, other displays have a single
+// bi-directional SDA pin and the library will try to read this via the MOSI line.
+// To use the SDA line for reading data from the TFT uncomment the following line:
+
+// #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
+
+// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
+// Try ONE option at a time to find the correct colour order for your display
+
+  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
+
+// #define M5STACK
+
+// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation
+// #define TFT_WIDTH  80
+ #define TFT_WIDTH  135 // Marauder Mini
+// #define TFT_WIDTH  240 // ST7789 240 x 240 and 240 x 320
+// #define TFT_HEIGHT 160
+ #define TFT_HEIGHT 240 // Marauder Mini
+// #define TFT_HEIGHT 240 // ST7789 240 x 240
+// #define TFT_HEIGHT 320 // ST7789 240 x 320
+
+// For ST7735 ONLY, define the type of display, originally this was based on the
+// colour of the tab on the screen protector film but this is not always true, so try
+// out the different options below if the screen does not display graphics correctly,
+// e.g. colours wrong, mirror images, or tray pixels at the edges.
+// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
+// this User_Setup file, then rebuild and upload the sketch to the board again:
+
+// #define ST7735_INITB
+// #define ST7735_GREENTAB
+// #define ST7735_GREENTAB2
+// #define ST7735_GREENTAB3
+// #define ST7735_GREENTAB128    // For 128 x 128 display
+// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
+// #define ST7735_REDTAB
+// #define ST7735_BLACKTAB
+// #define ST7735_REDTAB160x80   // For 160 x 80 display with 24 pixel offset
+
+// If colours are inverted (white shows as black) then uncomment one of the next
+// 2 lines try both options, one of the options should correct the inversion.
+
+// #define TFT_INVERSION_ON
+// #define TFT_INVERSION_OFF
+
+// If a backlight control signal is available then define the TFT_BL pin in Section 2
+// below. The backlight will be turned ON when tft.begin() is called, but the library
+// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
+// driven with a PWM signal or turned OFF/ON then this must be handled by the user
+// sketch. e.g. with digitalWrite(TFT_BL, LOW);
+
+ #define TFT_BACKLIGHT_ON HIGH  // HIGH or LOW are options
+
+// ##################################################################################
+//
+// Section 2. Define the pins that are used to interface with the display here
+//
+// ##################################################################################
+
+// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
+// Typical setup for ESP8266 NodeMCU ESP-12 is :
+//
+// Display SDO/MISO  to NodeMCU pin D6 (or leave disconnected if not reading TFT)
+// Display LED       to NodeMCU pin VIN (or 5V, see below)
+// Display SCK       to NodeMCU pin D5
+// Display SDI/MOSI  to NodeMCU pin D7
+// Display DC (RS/AO)to NodeMCU pin D3
+// Display RESET     to NodeMCU pin D4 (or RST, see below)
+// Display CS        to NodeMCU pin D8 (or GND, see below)
+// Display GND       to NodeMCU pin GND (0V)
+// Display VCC       to NodeMCU 5V or 3.3V
+//
+// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
+//
+// The DC (Data Command) pin may be labeled AO or RS (Register Select)
+//
+// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
+// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
+// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
+// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
+//
+// The NodeMCU D0 pin can be used for RST
+//
+//
+// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin
+// If 5V is not available at a pin you can use 3.3V but backlight brightness
+// will be lower.
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ######
+
+// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
+//#define TFT_CS   PIN_D8  // Chip select control pin D8
+//#define TFT_DC   PIN_D3  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1    // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+//#define TFT_BL PIN_D1  // LED back-light (only for ST7789 with backlight control pin)
+
+//#define TOUCH_CS PIN_D2     // Chip select pin (T_CS) of touch screen
+
+//#define TFT_WR PIN_D2       // Write strobe for modified Raspberry Pi TFT only
+
+
+// ######  FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES  ######
+
+// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact
+// but saves pins for other functions. It is best not to connect MISO as some displays
+// do not tristate that line wjen chip select is high!
+// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode
+// On NodeMCU V3  S0 =MISO, S1 =MOSI, S2 =SCLK
+// In ESP8266 overlap mode the following must be defined
+
+//#define TFT_SPI_OVERLAP
+
+// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3
+//#define TFT_CS   PIN_D3
+//#define TFT_DC   PIN_D5  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP   ######
+
+// For ESP32 Dev board (only tested with ILI9341 display)
+// The hardware SPI can be mapped to any pins
+
+// M5 Cardputer
+#define TFT_BL   38
+#define TFT_RST  33  // Reset pin (could connect to NodeMCU RST, see next line)
+#define TFT_DC   34  // Data Command control pin
+#define TFT_MOSI 35
+#define TFT_SCLK 36
+#define TFT_CS   37  // Chip select control pin D8
+#define TOUCH_CS -1
+// #define TFT_MISO -1
+
+// Display SDO/MISO  to NodeMCU pin D6 (or leave disconnected if not reading TFT)
+// Display LED       to NodeMCU pin VIN (or 5V, see below)
+// Display SCK       to NodeMCU pin D5
+// Display SDI/MOSI  to NodeMCU pin D7
+// Display DC (RS/AO)to NodeMCU pin D3
+// Display RESET     to NodeMCU pin D4 (or RST, see below)
+// Display CS        to NodeMCU pin D8 (or GND, see below)
+// Display GND       to NodeMCU pin GND (0V)
+// Display VCC       to NodeMCU 5V or 3.3V
+
+/*
+// ESP32 Marauder 
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   17  // Chip select control pin
+#define TFT_DC   16  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+// ESP32 Centauri
+/*
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   27  // Chip select control pin
+#define TFT_DC   26  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+//#define TFT_WR 22    // Write strobe for modified Raspberry Pi TFT only
+
+// For the M5Stack module use these #define lines
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_CS   14  // Chip select control pin
+//#define TFT_DC   27  // Data Command control pin
+//#define TFT_RST  33  // Reset pin (could connect to Arduino RESET pin)
+//#define TFT_BL   32  // LED back-light (required for M5Stack)
+
+// ######       EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP        ######
+
+// The library supports 8 bit parallel TFTs with the ESP32, the pin
+// selection below is compatible with ESP32 boards in UNO format.
+// Wemos D32 boards need to be modified, see diagram in Tools folder.
+// Only ILI9481 and ILI9341 based displays have been tested!
+
+// Parallel bus is only supported on ESP32
+// Uncomment line below to use ESP32 Parallel interface instead of SPI
+
+//#define ESP32_PARALLEL
+
+// The ESP32 and TFT the pins used for testing are:
+//#define TFT_CS   33  // Chip select control pin (library pulls permanently low
+//#define TFT_DC   15  // Data Command control pin - must use a pin in the range 0-31
+//#define TFT_RST  32  // Reset pin, toggles on startup
+
+//#define TFT_WR    4  // Write strobe control pin - must use a pin in the range 0-31
+//#define TFT_RD    2  // Read strobe control pin
+
+//#define TFT_D0   12  // Must use pins in the range 0-31 for the data bus
+//#define TFT_D1   13  // so a single register write sets/clears all bits.
+//#define TFT_D2   26  // Pins can be randomly assigned, this does not affect
+//#define TFT_D3   25  // TFT screen update performance.
+//#define TFT_D4   17
+//#define TFT_D5   16
+//#define TFT_D6   27
+//#define TFT_D7   14
+
+
+// ##################################################################################
+//
+// Section 3. Define the fonts that are to be used here
+//
+// ##################################################################################
+
+// Comment out the #defines below with // to stop that font being loaded
+// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
+// normally necessary. If all fonts are loaded the extra FLASH space required is
+// about 17Kbytes. To save FLASH space only enable the fonts you need!
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
+// this will save ~20kbytes of FLASH
+#define SMOOTH_FONT
+
+
+// ##################################################################################
+//
+// Section 4. Other options
+//
+// ##################################################################################
+
+// Define the SPI clock frequency, this affects the graphics rendering speed. Too
+// fast and the TFT driver will not keep up and display corruption appears.
+// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
+// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
+// With an ILI9163 display 27 MHz works OK.
+
+// #define SPI_FREQUENCY   1000000
+//#define SPI_FREQUENCY   5000000
+// #define SPI_FREQUENCY  10000000
+ #define SPI_FREQUENCY  20000000
+//#define SPI_FREQUENCY  27000000 // Marauder // Actually sets it to 26.67MHz = 80/3
+// #define SPI_FREQUENCY  40000000
+// #define SPI_FREQUENCY  80000000
+
+// Optional reduced SPI frequency for reading TFT
+#define SPI_READ_FREQUENCY  20000000
+
+// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
+// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
+// then uncomment the following line:
+//#define USE_HSPI_PORT
+
+// Comment out the following #define if "SPI Transactions" do not need to be
+// supported. When commented out the code size will be smaller and sketches will
+// run slightly faster, so leave it commented out unless you need it!
+
+// Transaction support is needed to work with SD library but not needed with TFT_SdFat
+// Transaction support is required if other SPI devices are connected.
+
+// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
+// so changing it here has no effect
+
+// #define SUPPORT_TRANSACTIONS

User_Setup_pocket_sdr_3.h

@@ -0,0 +1,330 @@
+//                            USER DEFINED SETTINGS
+//   Set driver type, fonts to be loaded, pins used and SPI control method etc
+//
+//   See the User_Setup_Select.h file if you wish to be able to define multiple
+//   setups and then easily select which setup file is used by the compiler.
+//
+//   If this file is edited correctly then all the library example sketches should
+//   run without the need to make any more changes for a particular hardware setup!
+//   Note that some sketches are designed for a particular TFT pixel width/height
+
+
+// ##################################################################################
+//
+// Section 1. Call up the right driver file and any options for it
+//
+// ##################################################################################
+
+// Display type -  only define if RPi display
+//#define RPI_DRIVER
+
+// Only define one driver, the other ones must be commented out
+//#define ILI9341_DRIVER // OG Marauder
+#define ST7735_DRIVER    // Marauder Mini  // Define additional parameters below for this display
+//#define ILI9163_DRIVER     // Define additional parameters below for this display
+//#define S6D02A1_DRIVER
+//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
+//#define HX8357D_DRIVER
+//#define ILI9481_DRIVER
+//#define ILI9486_DRIVER
+//#define ILI9488_DRIVER     // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
+//#define ST7789_DRIVER      // Full configuration option, define additional parameters below for this display
+//#define ST7789_2_DRIVER    // Minimal configuration option, define additional parameters below for this display
+//#define R61581_DRIVER
+//#define RM68140_DRIVER
+//#define ST7796_DRIVER
+
+// Some displays support SPI reads via the MISO pin, other displays have a single
+// bi-directional SDA pin and the library will try to read this via the MOSI line.
+// To use the SDA line for reading data from the TFT uncomment the following line:
+
+// #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
+
+// For ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
+// Try ONE option at a time to find the correct colour order for your display
+
+//  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// For M5Stack ESP32 module with integrated ILI9341 display ONLY, remove // in line below
+
+// #define M5STACK
+
+// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation
+ #define TFT_WIDTH  80
+// #define TFT_WIDTH  128 // Marauder Mini
+// #define TFT_WIDTH  240 // ST7789 240 x 240 and 240 x 320
+ #define TFT_HEIGHT 160
+// #define TFT_HEIGHT 128 // Marauder Mini
+// #define TFT_HEIGHT 240 // ST7789 240 x 240
+// #define TFT_HEIGHT 320 // ST7789 240 x 320
+
+// For ST7735 ONLY, define the type of display, originally this was based on the
+// colour of the tab on the screen protector film but this is not always true, so try
+// out the different options below if the screen does not display graphics correctly,
+// e.g. colours wrong, mirror images, or tray pixels at the edges.
+// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
+// this User_Setup file, then rebuild and upload the sketch to the board again:
+
+// #define ST7735_INITB
+// #define ST7735_GREENTAB
+// #define ST7735_GREENTAB2
+// #define ST7735_GREENTAB3
+// #define ST7735_GREENTAB128    // For 128 x 128 display
+// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
+// #define ST7735_REDTAB
+// #define ST7735_BLACKTAB
+ #define ST7735_REDTAB160x80   // For 160 x 80 display with 24 pixel offset
+
+// If colours are inverted (white shows as black) then uncomment one of the next
+// 2 lines try both options, one of the options should correct the inversion.
+
+// #define TFT_INVERSION_ON
+ #define TFT_INVERSION_OFF
+
+// If a backlight control signal is available then define the TFT_BL pin in Section 2
+// below. The backlight will be turned ON when tft.begin() is called, but the library
+// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
+// driven with a PWM signal or turned OFF/ON then this must be handled by the user
+// sketch. e.g. with digitalWrite(TFT_BL, LOW);
+
+ #define TFT_BACKLIGHT_ON LOW  // HIGH or LOW are options
+
+// ##################################################################################
+//
+// Section 2. Define the pins that are used to interface with the display here
+//
+// ##################################################################################
+
+// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
+// Typical setup for ESP8266 NodeMCU ESP-12 is :
+//
+// Display SDO/MISO  to NodeMCU pin D6 (or leave disconnected if not reading TFT)
+// Display LED       to NodeMCU pin VIN (or 5V, see below)
+// Display SCK       to NodeMCU pin D5
+// Display SDI/MOSI  to NodeMCU pin D7
+// Display DC (RS/AO)to NodeMCU pin D3
+// Display RESET     to NodeMCU pin D4 (or RST, see below)
+// Display CS        to NodeMCU pin D8 (or GND, see below)
+// Display GND       to NodeMCU pin GND (0V)
+// Display VCC       to NodeMCU 5V or 3.3V
+//
+// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
+//
+// The DC (Data Command) pin may be labeled AO or RS (Register Select)
+//
+// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
+// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
+// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
+// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
+//
+// The NodeMCU D0 pin can be used for RST
+//
+//
+// Note: only some versions of the NodeMCU provide the USB 5V on the VIN pin
+// If 5V is not available at a pin you can use 3.3V but backlight brightness
+// will be lower.
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP8266 SETUP ######
+
+// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
+//#define TFT_CS   PIN_D8  // Chip select control pin D8
+//#define TFT_DC   PIN_D3  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1    // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+//#define TFT_BL PIN_D1  // LED back-light (only for ST7789 with backlight control pin)
+
+//#define TOUCH_CS PIN_D2     // Chip select pin (T_CS) of touch screen
+
+//#define TFT_WR PIN_D2       // Write strobe for modified Raspberry Pi TFT only
+
+
+// ######  FOR ESP8266 OVERLAP MODE EDIT THE PIN NUMBERS IN THE FOLLOWING LINES  ######
+
+// Overlap mode shares the ESP8266 FLASH SPI bus with the TFT so has a performance impact
+// but saves pins for other functions. It is best not to connect MISO as some displays
+// do not tristate that line wjen chip select is high!
+// On NodeMCU 1.0 SD0=MISO, SD1=MOSI, CLK=SCLK to connect to TFT in overlap mode
+// On NodeMCU V3  S0 =MISO, S1 =MOSI, S2 =SCLK
+// In ESP8266 overlap mode the following must be defined
+
+//#define TFT_SPI_OVERLAP
+
+// In ESP8266 overlap mode the TFT chip select MUST connect to pin D3
+//#define TFT_CS   PIN_D3
+//#define TFT_DC   PIN_D5  // Data Command control pin
+//#define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
+
+
+// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR ESP32 SETUP   ######
+
+// For ESP32 Dev board (only tested with ILI9341 display)
+// The hardware SPI can be mapped to any pins
+
+// Marauder Mini
+// Drone Detector v1
+
+#define TFT_CS   23  // Chip select control pin D8
+#define TFT_DC   24  // Data Command control pin
+#define TFT_RST  -1  // Reset pin (could connect to NodeMCU RST, see next line)
+#define TOUCH_CS -1
+//#define TFT_MISO 16
+#define TFT_MOSI 7
+#define TFT_SCLK 6
+#define TFT_BL   27
+
+
+// Drone Detector v2
+/*
+#define TFT_CS   17  // Chip select control pin D8
+#define TFT_DC   26  // Data Command control pin
+#define TFT_RST  -1  // Reset pin (could connect to NodeMCU RST, see next line)
+#define TOUCH_CS -1
+//#define TFT_MISO 16
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_BL   32
+*/
+/*
+// ESP32 Marauder 
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   17  // Chip select control pin
+#define TFT_DC   16  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+// ESP32 Centauri
+/*
+#define TFT_MISO 19
+#define TFT_MOSI 23
+#define TFT_SCLK 18
+#define TFT_CS   27  // Chip select control pin
+#define TFT_DC   26  // Data Command control pin
+#define TFT_RST   5  // Reset pin (could connect to RST pin)
+//#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
+
+#define TFT_BL   32  // LED back-light (only for ST7789 with backlight control pin)
+
+#define TOUCH_CS 21     // Chip select pin (T_CS) of touch screen
+*/
+/////////////////////////////
+
+//#define TFT_WR 22    // Write strobe for modified Raspberry Pi TFT only
+
+// For the M5Stack module use these #define lines
+//#define TFT_MISO 19
+//#define TFT_MOSI 23
+//#define TFT_SCLK 18
+//#define TFT_CS   14  // Chip select control pin
+//#define TFT_DC   27  // Data Command control pin
+//#define TFT_RST  33  // Reset pin (could connect to Arduino RESET pin)
+//#define TFT_BL   32  // LED back-light (required for M5Stack)
+
+// ######       EDIT THE PINs BELOW TO SUIT YOUR ESP32 PARALLEL TFT SETUP        ######
+
+// The library supports 8 bit parallel TFTs with the ESP32, the pin
+// selection below is compatible with ESP32 boards in UNO format.
+// Wemos D32 boards need to be modified, see diagram in Tools folder.
+// Only ILI9481 and ILI9341 based displays have been tested!
+
+// Parallel bus is only supported on ESP32
+// Uncomment line below to use ESP32 Parallel interface instead of SPI
+
+//#define ESP32_PARALLEL
+
+// The ESP32 and TFT the pins used for testing are:
+//#define TFT_CS   33  // Chip select control pin (library pulls permanently low
+//#define TFT_DC   15  // Data Command control pin - must use a pin in the range 0-31
+//#define TFT_RST  32  // Reset pin, toggles on startup
+
+//#define TFT_WR    4  // Write strobe control pin - must use a pin in the range 0-31
+//#define TFT_RD    2  // Read strobe control pin
+
+//#define TFT_D0   12  // Must use pins in the range 0-31 for the data bus
+//#define TFT_D1   13  // so a single register write sets/clears all bits.
+//#define TFT_D2   26  // Pins can be randomly assigned, this does not affect
+//#define TFT_D3   25  // TFT screen update performance.
+//#define TFT_D4   17
+//#define TFT_D5   16
+//#define TFT_D6   27
+//#define TFT_D7   14
+
+
+// ##################################################################################
+//
+// Section 3. Define the fonts that are to be used here
+//
+// ##################################################################################
+
+// Comment out the #defines below with // to stop that font being loaded
+// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
+// normally necessary. If all fonts are loaded the extra FLASH space required is
+// about 17Kbytes. To save FLASH space only enable the fonts you need!
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
+// this will save ~20kbytes of FLASH
+#define SMOOTH_FONT
+
+
+// ##################################################################################
+//
+// Section 4. Other options
+//
+// ##################################################################################
+
+// Define the SPI clock frequency, this affects the graphics rendering speed. Too
+// fast and the TFT driver will not keep up and display corruption appears.
+// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
+// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
+// With an ILI9163 display 27 MHz works OK.
+
+// #define SPI_FREQUENCY   1000000
+//#define SPI_FREQUENCY   5000000
+// #define SPI_FREQUENCY  10000000
+// #define SPI_FREQUENCY  20000000
+#define SPI_FREQUENCY  27000000 // Marauder // Actually sets it to 26.67MHz = 80/3
+// #define SPI_FREQUENCY  40000000
+// #define SPI_FREQUENCY  80000000
+
+// Optional reduced SPI frequency for reading TFT
+//#define SPI_READ_FREQUENCY  20000000
+
+// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
+//#define SPI_TOUCH_FREQUENCY  2500000
+
+// The ESP32 has 2 free SPI ports i.e. VSPI and HSPI, the VSPI is the default.
+// If the VSPI port is in use and pins are not accessible (e.g. TTGO T-Beam)
+// then uncomment the following line:
+//#define USE_HSPI_PORT
+
+// Comment out the following #define if "SPI Transactions" do not need to be
+// supported. When commented out the code size will be smaller and sketches will
+// run slightly faster, so leave it commented out unless you need it!
+
+// Transaction support is needed to work with SD library but not needed with TFT_SdFat
+// Transaction support is required if other SPI devices are connected.
+
+// Transactions are automatically enabled by the library for an ESP32 (to use HAL mutex)
+// so changing it here has no effect
+
+// #define SUPPORT_TRANSACTIONS

esp32_marauder/Assets.h

@@ -215,7 +215,19 @@ PROGMEM static const unsigned char menu_icons[][66] = {
     0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 
     0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 
     0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
+    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
+    {0xFF, 0xFF, 0x3F, 0xFF, 0xF7, 0x3F, 0x7F, 0x96, 0x3F, 0xFF, 0xED, 0x3F, // PINESCAN_SNIFF: 37
+    0x3F, 0x25, 0x3F, 0xDF, 0xD2, 0x3E, 0xFF, 0xED, 0x3F, 0x7F, 0x8E, 0x3F, 
+    0x3B, 0x77, 0x37, 0xBD, 0x6A, 0x2F, 0xD6, 0xBD, 0x1A, 0xDA, 0xDA, 0x16, 
+    0x5A, 0x6F, 0x16, 0x9A, 0xF7, 0x16, 0xD6, 0x5A, 0x1A, 0xDD, 0xBD, 0x2E, 
+    0xBB, 0x5A, 0x37, 0x3F, 0x6F, 0x3F, 0x7F, 0xB7, 0x3F, 0xFF, 0xCC, 0x3F, 
+    0xFF, 0xF3, 0x3F, 0xFF, 0xFF, 0x3F},
+    {0xFF, 0xFF, 0xFF, 0xFF, 0x07, 0xFF, 0xFF, 0xFC, 0xFF, 0xF3, 0x87, 0xF7, // JOINED: 38
+    0x7F, 0xEE, 0xFF, 0xED, 0xC7, 0xDD, 0xBF, 0xDB, 0x7F, 0xDB, 0x67, 0xDB, 
+    0x67, 0xDB, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
+    {0xFF, 0xFF, 0x1F, 0xF8, 0x0F, 0xF0, 0x07, 0xE0, 0x07, 0xE0, 0x07, 0xE0, // FORCE: 39
+    0x67, 0xE6, 0x77, 0xEE, 0x87, 0xE0, 0x8F, 0xF1, 0x0F, 0xF0, 0x4F, 0xF5, 
+    0x1F, 0xF8, 0x3F, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF}
 };
 
 /*#ifndef MARAUDER_MINI

esp32_marauder/CommandLine.cpp

@@ -221,6 +221,8 @@ void CommandLine::runCommand(String input) {
     // WiFi sniff/scan
     Serial.println(HELP_EVIL_PORTAL_CMD);
     Serial.println(HELP_PACKET_COUNT_CMD);
+    Serial.println(HELP_PING_CMD);
+    Serial.println(HELP_PORT_SCAN_CMD);
     Serial.println(HELP_SIGSTREN_CMD);
     Serial.println(HELP_SCAN_ALL_CMD);
     Serial.println(HELP_SCANAP_CMD);
@@ -229,6 +231,8 @@ void CommandLine::runCommand(String input) {
     Serial.println(HELP_SNIFF_BEACON_CMD);
     Serial.println(HELP_SNIFF_PROBE_CMD);
     Serial.println(HELP_SNIFF_PWN_CMD);
+    Serial.println(HELP_SNIFF_PINESCAN_CMD);
+    Serial.println(HELP_SNIFF_MULTISSID_CMD);
     Serial.println(HELP_SNIFF_ESP_CMD);
     Serial.println(HELP_SNIFF_DEAUTH_CMD);
     Serial.println(HELP_SNIFF_PMKID_CMD);
@@ -246,11 +250,13 @@ void CommandLine::runCommand(String input) {
     Serial.println(HELP_LIST_AP_CMD_B);
     Serial.println(HELP_LIST_AP_CMD_C);
     Serial.println(HELP_LIST_AP_CMD_D);
+    Serial.println(HELP_LIST_AP_CMD_E);
     Serial.println(HELP_SEL_CMD_A);
     Serial.println(HELP_SSID_CMD_A);
     Serial.println(HELP_SSID_CMD_B);
     Serial.println(HELP_SAVE_CMD);
     Serial.println(HELP_LOAD_CMD);
+    Serial.println(HELP_JOIN_CMD);
     
     // Bluetooth sniff/scan
     #ifdef HAS_BT
@@ -280,9 +286,16 @@ void CommandLine::runCommand(String input) {
     //  web_obj.shutdownServer();
     //  return;
     //}
+
+    int f_arg = this->argSearch(&cmd_args, "-f");
     
     uint8_t old_scan_mode=wifi_scan_obj.currentScanMode;
 
+    if (f_arg != -1) {
+      WiFi.disconnect(true);
+      delay(100);
+    }
+
     wifi_scan_obj.StartScan(WIFI_SCAN_OFF);
 
     if(old_scan_mode == WIFI_SCAN_GPS_NMEA)
@@ -683,6 +696,24 @@ void CommandLine::runCommand(String input) {
       #endif
       wifi_scan_obj.StartScan(WIFI_SCAN_PWN, TFT_MAGENTA);
     }
+    // PineScan sniff
+    else if (cmd_args.get(0) == SNIFF_PINESCAN_CMD) {
+      Serial.println("Starting Pinescan sniff. Stop with " + (String)STOPSCAN_CMD);
+      #ifdef HAS_SCREEN
+        display_obj.clearScreen();
+        menu_function_obj.drawStatusBar();
+      #endif
+      wifi_scan_obj.StartScan(WIFI_SCAN_PINESCAN, TFT_MAGENTA);
+    }
+    // MultiSSID sniff
+    else if (cmd_args.get(0) == SNIFF_MULTISSID_CMD) {
+      Serial.println("Starting MultiSSID sniff. Stop with " + (String)STOPSCAN_CMD);
+      #ifdef HAS_SCREEN
+        display_obj.clearScreen();
+        menu_function_obj.drawStatusBar();
+      #endif
+      wifi_scan_obj.StartScan(WIFI_SCAN_MULTISSID, TFT_MAGENTA);
+    }
     // Espressif sniff
     else if (cmd_args.get(0) == SNIFF_ESP_CMD) {
       Serial.println("Starting Espressif device sniff. Stop with " + (String)STOPSCAN_CMD);
@@ -1140,6 +1171,52 @@ void CommandLine::runCommand(String input) {
     }
   }
 
+  if (wifi_scan_obj.wifi_connected) {
+    // Ping Scan
+    if (cmd_args.get(0) == PING_CMD) {
+      Serial.println("Starting Ping Scan. Stop with " + (String)STOPSCAN_CMD);
+      #ifdef HAS_SCREEN
+        display_obj.clearScreen();
+        menu_function_obj.drawStatusBar();
+      #endif
+      wifi_scan_obj.StartScan(WIFI_PING_SCAN, TFT_GREEN);
+    }
+
+    // Port Scan
+    if (cmd_args.get(0) == PORT_SCAN_CMD) {
+      int all_sw = this->argSearch(&cmd_args, "-a");
+      int ip_sw = this->argSearch(&cmd_args, "-t");
+
+      // Check they specified ip index
+      if (ip_sw != -1) {
+        int ip_index = cmd_args.get(ip_sw + 1).toInt();
+
+        // Check provided index is in list
+        if (ip_index < ipList->size()) {
+
+          // Full port scan
+          if (all_sw != -1) {
+            Serial.println("Selected: " + ipList->get(ip_index).toString());
+            wifi_scan_obj.current_scan_ip = ipList->get(ip_index);
+            #ifdef HAS_SCREEN
+              display_obj.clearScreen();
+              menu_function_obj.drawStatusBar();
+            #endif
+            wifi_scan_obj.StartScan(WIFI_PORT_SCAN_ALL, TFT_BLUE);
+          }
+        }
+        else {
+          Serial.println("The IP index specified is out of range");
+          return;
+        }
+      }
+      else {
+        Serial.println("You did not specify an IP index");
+        return;
+      }
+    }
+  }
+
 
   int count_selected = 0;
   //// WiFi aux commands
@@ -1149,6 +1226,7 @@ void CommandLine::runCommand(String input) {
     int ss_sw = this->argSearch(&cmd_args, "-s");
     int cl_sw = this->argSearch(&cmd_args, "-c");
     int at_sw = this->argSearch(&cmd_args, "-t");
+    int ip_sw = this->argSearch(&cmd_args, "-i");
 
     // List APs
     if (ap_sw != -1) {
@@ -1162,6 +1240,12 @@ void CommandLine::runCommand(String input) {
       }
       this->showCounts(count_selected);
     }
+    // List IPs
+    else if (ip_sw != -1) {
+      for (int i = 0; i < ipList->size(); i++) {
+        Serial.println("[" + (String)i + "] " + ipList->get(i).toString());
+      }
+    }
     // List SSIDs
     else if (ss_sw != -1) {
       for (int i = 0; i < ssids->size(); i++) {
@@ -1221,6 +1305,28 @@ void CommandLine::runCommand(String input) {
       wifi_scan_obj.RunInfo();
     }
   }
+  else if (cmd_args.get(0) == JOIN_CMD) {
+    int ap_sw = this->argSearch(&cmd_args, "-a");
+    int pw_sw = this->argSearch(&cmd_args, "-p");
+
+    if ((ap_sw != -1) && (pw_sw != -1)) {
+      int index = cmd_args.get(ap_sw + 1).toInt();
+      String password = cmd_args.get(pw_sw + 1);
+      Serial.println("Using SSID: " + (String)access_points->get(index).essid + " Password: " + (String)password);
+      //wifi_scan_obj.currentScanMode = LV_JOIN_WIFI;
+      //wifi_scan_obj.StartScan(LV_JOIN_WIFI, TFT_YELLOW); 
+      wifi_scan_obj.joinWiFi(access_points->get(index).essid, password, false);
+      #ifdef HAS_SCREEN
+        #ifdef HAS_MINI_KB
+          menu_function_obj.changeMenu(menu_function_obj.current_menu);
+        #endif
+      #endif
+    }
+    else {
+      Serial.println("You did not provide the proper args");
+      return;
+    }
+  }
   // Select access points or stations
   else if (cmd_args.get(0) == SEL_CMD) {
     // Get switches

esp32_marauder/CommandLine.h

@@ -34,6 +34,7 @@ extern LinkedList<AccessPoint>* access_points;
 extern LinkedList<AirTag>* airtags;
 extern LinkedList<ssid>* ssids;
 extern LinkedList<Station>* stations;
+extern LinkedList<IPAddress>* ipList;
 extern const String PROGMEM version_number;
 extern const String PROGMEM board_target;
 
@@ -63,11 +64,15 @@ const char PROGMEM SNIFF_RAW_CMD[] = "sniffraw";
 const char PROGMEM SNIFF_BEACON_CMD[] = "sniffbeacon";
 const char PROGMEM SNIFF_PROBE_CMD[] = "sniffprobe";
 const char PROGMEM SNIFF_PWN_CMD[] = "sniffpwn";
+const char PROGMEM SNIFF_PINESCAN_CMD[] = "sniffpinescan";
+const char PROGMEM SNIFF_MULTISSID_CMD[] = "sniffmultissid";
 const char PROGMEM SNIFF_ESP_CMD[] = "sniffesp";
 const char PROGMEM SNIFF_DEAUTH_CMD[] = "sniffdeauth";
 const char PROGMEM SNIFF_PMKID_CMD[] = "sniffpmkid";
 const char PROGMEM STOPSCAN_CMD[] = "stopscan";
 const char PROGMEM WARDRIVE_CMD[] = "wardrive";
+const char PROGMEM PING_CMD[] = "pingscan";
+const char PROGMEM PORT_SCAN_CMD[] = "portscan";
 
 // WiFi attack
 const char PROGMEM ATTACK_CMD[] = "attack";
@@ -83,6 +88,7 @@ const char PROGMEM SEL_CMD[] = "select";
 const char PROGMEM SSID_CMD[] = "ssid";
 const char PROGMEM SAVE_CMD[] = "save";
 const char PROGMEM LOAD_CMD[] = "load";
+const char PROGMEM JOIN_CMD[] = "join";
 
 // Bluetooth sniff/scan
 const char PROGMEM BT_SPAM_CMD[] = "blespam";
@@ -121,11 +127,15 @@ const char PROGMEM HELP_SNIFF_RAW_CMD[] = "sniffraw";
 const char PROGMEM HELP_SNIFF_BEACON_CMD[] = "sniffbeacon";
 const char PROGMEM HELP_SNIFF_PROBE_CMD[] = "sniffprobe";
 const char PROGMEM HELP_SNIFF_PWN_CMD[] = "sniffpwn";
+const char PROGMEM HELP_SNIFF_PINESCAN_CMD[] = "sniffpinescan";
+const char PROGMEM HELP_SNIFF_MULTISSID_CMD[] = "sniffmultissid";
 const char PROGMEM HELP_SNIFF_ESP_CMD[] = "sniffesp";
 const char PROGMEM HELP_SNIFF_DEAUTH_CMD[] = "sniffdeauth";
 const char PROGMEM HELP_SNIFF_PMKID_CMD[] = "sniffpmkid [-c <channel>][-d][-l]";
-const char PROGMEM HELP_STOPSCAN_CMD[] = "stopscan";
+const char PROGMEM HELP_STOPSCAN_CMD[] = "stopscan [-f]";
 const char PROGMEM HELP_WARDRIVE_CMD[] = "wardrive [-s]";
+const char PROGMEM HELP_PING_CMD[] = "pingscan";
+const char PROGMEM HELP_PORT_SCAN_CMD[] = "portscan [-a] -t <ip index>";
 
 // WiFi attack
 const char PROGMEM HELP_ATTACK_CMD[] = "attack -t <beacon [-l/-r/-a]/deauth [-c]/[-s <src mac>] [-d <dst mac>]/probe/rickroll>";
@@ -135,12 +145,14 @@ const char PROGMEM HELP_LIST_AP_CMD_A[] = "list -s";
 const char PROGMEM HELP_LIST_AP_CMD_B[] = "list -a";
 const char PROGMEM HELP_LIST_AP_CMD_C[] = "list -c";
 const char PROGMEM HELP_LIST_AP_CMD_D[] = "list -t";
+const char PROGMEM HELP_LIST_AP_CMD_E[] = "list -i";
 const char PROGMEM HELP_INFO_CMD[] = "info [-a <index>]";
 const char PROGMEM HELP_SEL_CMD_A[] = "select -a/-s/-c <index (comma separated)>/-f \"equals <String> or contains <String>\"";
 const char PROGMEM HELP_SSID_CMD_A[] = "ssid -a [-g <count>/-n <name>]";
 const char PROGMEM HELP_SSID_CMD_B[] = "ssid -r <index>";
 const char PROGMEM HELP_SAVE_CMD[] = "save -a/-s";
 const char PROGMEM HELP_LOAD_CMD[] = "load -a/-s";
+const char PROGMEM HELP_JOIN_CMD[] = "join -a <index> -p <password>";
 
 // Bluetooth sniff/scan
 const char PROGMEM HELP_BT_SNIFF_CMD[] = "sniffbt [-t] <airtag/flipper>";

esp32_marauder/Display.cpp

@@ -11,6 +11,34 @@ Display::Display()
 {
 }
 
+int8_t Display::menuButton(uint16_t *x, uint16_t *y, bool pressed, bool check_hold) {
+  #ifdef HAS_ILI9341
+    for (uint8_t b = BUTTON_ARRAY_LEN; b < BUTTON_ARRAY_LEN + 3; b++) {
+      if (pressed && this->key[b].contains(*x, *y)) {
+        this->key[b].press(true);  // tell the button it is pressed
+      } else {
+        this->key[b].press(false);  // tell the button it is NOT pressed
+      }
+    }
+
+    for (uint8_t b = BUTTON_ARRAY_LEN; b < BUTTON_ARRAY_LEN + 3; b++) {
+      if (!check_hold) {
+        if ((this->key[b].justReleased()) && (!pressed)) {
+          return b - BUTTON_ARRAY_LEN;
+        }
+      }
+      else {
+        if ((this->key[b].isPressed())) {
+          return b - BUTTON_ARRAY_LEN;
+        }
+      }
+    }
+
+  #endif
+
+  return -1;
+}
+
 uint8_t Display::updateTouch(uint16_t *x, uint16_t *y, uint16_t threshold) {
   #ifdef HAS_ILI9341
     if (!this->headless_mode)
@@ -25,6 +53,10 @@ uint8_t Display::updateTouch(uint16_t *x, uint16_t *y, uint16_t threshold) {
 
           uint8_t rot = this->tft.getRotation();
 
+          //#ifdef HAS_CYD_PORTRAIT
+          //  rot = 0;
+          //#endif
+
           switch (rot) {
             case 0: // Standard Protrait
               *x = map(p.x, 200, 3700, 1, TFT_WIDTH);
@@ -55,6 +87,28 @@ uint8_t Display::updateTouch(uint16_t *x, uint16_t *y, uint16_t threshold) {
   return 0;
 }
 
+bool Display::isTouchHeld(uint16_t threshold) {
+  static unsigned long touchStartTime = 0;
+  static bool touchHeld = false;
+  uint16_t x, y;
+
+  if (this->updateTouch(&x, &y, threshold)) {
+    // Touch detected
+    if (touchStartTime == 0) {
+      touchStartTime = millis();  // First touch timestamp
+    } else if (!touchHeld && millis() - touchStartTime >= 1000) {
+      touchHeld = true;  // Held for at least 1000ms
+      return true;
+    }
+  } else {
+    // Touch released
+    touchStartTime = 0;
+    touchHeld = false;
+  }
+
+  return false;
+}
+
 // Function to prepare the display and the menus
 void Display::RunSetup()
 {
@@ -74,17 +128,8 @@ void Display::RunSetup()
   #endif
   
   tft.init();
-  #ifndef MARAUDER_M5STICKC
-    tft.setRotation(0); // Portrait
-  #endif
 
-  #ifdef MARAUDER_M5STICKC
-    tft.setRotation(1);
-  #endif
-
-  #ifdef MARAUDER_REV_FEATHER
-    tft.setRotation(1);
-  #endif
+  tft.setRotation(SCREEN_ORIENTATION);
 
   tft.setCursor(0, 0);
 
@@ -93,23 +138,16 @@ void Display::RunSetup()
     #ifndef HAS_CYD_TOUCH
       #ifdef TFT_SHIELD
         uint16_t calData[5] = { 275, 3494, 361, 3528, 4 }; // tft.setRotation(0); // Portrait with TFT Shield
-        //Serial.println(F("Using TFT Shield"));
       #elif defined(TFT_DIY)
         uint16_t calData[5] = { 339, 3470, 237, 3438, 2 }; // tft.setRotation(0); // Portrait with DIY TFT
-        //Serial.println(F("Using TFT DIY"));
       #endif
       tft.setTouch(calData);
     #endif
 
   #endif
 
-  //tft.fillScreen(TFT_BLACK);
   clearScreen();
 
-  //Serial.println("SPI_FREQUENCY: " + (String)SPI_FREQUENCY);
-  //Serial.println("SPI_READ_FREQUENCY:" + (String)SPI_READ_FREQUENCY);
-  //Serial.println("SPI_TOUCH_FREQUENCY: " + (String)SPI_TOUCH_FREQUENCY);
-
   #ifdef KIT
     pinMode(KIT_LED_BUILTIN, OUTPUT);
   #endif
@@ -532,7 +570,11 @@ void Display::setupScrollArea(uint16_t tfa, uint16_t bfa) {
   //Serial.println("   bfa: " + (String)bfa);
   //Serial.println("yStart: " + (String)this->yStart);
   #ifdef HAS_ILI9341
-    tft.writecommand(ILI9341_VSCRDEF); // Vertical scroll definition
+    #ifdef HAS_ST7789
+      tft.writecommand(ST7789_VSCRDEF); // Vertical scroll definition
+    #else
+      tft.writecommand(ILI9341_VSCRDEF);
+    #endif
     tft.writedata(tfa >> 8);           // Top Fixed Area line count
     tft.writedata(tfa);
     tft.writedata((YMAX-tfa-bfa)>>8);  // Vertical Scrolling Area line count
@@ -545,7 +587,11 @@ void Display::setupScrollArea(uint16_t tfa, uint16_t bfa) {
 
 void Display::scrollAddress(uint16_t vsp) {
   #ifdef HAS_ILI9341
-    tft.writecommand(ILI9341_VSCRSADD); // Vertical scrolling pointer
+    #ifdef HAS_ST7789
+      tft.writecommand(ST7789_VSCRDEF); // Vertical scroll definition
+    #else
+      tft.writecommand(ILI9341_VSCRDEF);
+    #endif
     tft.writedata(vsp>>8);
     tft.writedata(vsp);
   #endif
@@ -665,7 +711,7 @@ void Display::drawStylus()
 //====================================================================================
 //   Decode and render the Jpeg image onto the TFT screen
 //====================================================================================
-void Display::jpegRender(int xpos, int ypos) {
+/*void Display::jpegRender(int xpos, int ypos) {
 
   // retrieve infomration about the image
   uint16_t  *pImg;
@@ -732,13 +778,13 @@ void Display::jpegRender(int xpos, int ypos) {
 
   // calculate how long it took to draw the image
   drawTime = millis() - drawTime; // Calculate the time it took
-}
+}*/
 
 //====================================================================================
 //   Print information decoded from the Jpeg image
 //====================================================================================
-void Display::jpegInfo() {
-/*
+/*void Display::jpegInfo() {
+
   Serial.println("===============");
   Serial.println("JPEG image info");
   Serial.println("===============");
@@ -752,13 +798,12 @@ void Display::jpegInfo() {
   Serial.print  ("MCU height :"); Serial.println(JpegDec.MCUHeight);
   Serial.println("===============");
   Serial.println("");
-  */
-}
+}*/
 
 //====================================================================================
 //   Open a Jpeg file and send it to the Serial port in a C array compatible format
 //====================================================================================
-void createArray(const char *filename) {
+/*void createArray(const char *filename) {
 
   // Open the named file
   fs::File jpgFile = SPIFFS.open( filename, "r");    // File handle reference for SPIFFS
@@ -798,7 +843,7 @@ void createArray(const char *filename) {
 
   Serial.println("};\r\n");
   jpgFile.close();
-}
+}*/
 
 // End JPEG_functions
 

esp32_marauder/Display.h

@@ -9,7 +9,7 @@
 
 #include <FS.h>
 #include <functional>
-#include <JPEGDecoder.h>
+//#include <JPEGDecoder.h>
 #include <LinkedList.h>
 #include <SPI.h>
 #include <lvgl.h>
@@ -49,6 +49,10 @@
 #define MAGENTA_KEY ";mgn;"
 #define WHITE_KEY ";wht;"
 
+#define UP_BUTTON     0
+#define SELECT_BUTTON 1
+#define DOWN_BUTTON   2
+
 class Display
 {
   private:
@@ -73,7 +77,7 @@ class Display
   public:
     Display();
     TFT_eSPI tft = TFT_eSPI();
-    TFT_eSPI_Button key[BUTTON_ARRAY_LEN];
+    TFT_eSPI_Button key[BUTTON_ARRAY_LEN + 3];
     const String PROGMEM version_number = MARAUDER_VERSION;
 
     #ifdef HAS_CYD_TOUCH
@@ -114,7 +118,9 @@ class Display
     // We can speed up scrolling of short text lines by just blanking the character we drew
     int blank[19]; // We keep all the strings pixel lengths to optimise the speed of the top line blanking
 
+    int8_t menuButton(uint16_t *x, uint16_t *y, bool pressed, bool check_hold = false);
     uint8_t updateTouch(uint16_t *x, uint16_t *y, uint16_t threshold = 600);
+    bool isTouchHeld(uint16_t threshold = 600);
     void tftDrawRedOnOffButton();
     void tftDrawGreenOnOffButton();
     void tftDrawGraphObjects(byte x_scale);
@@ -130,8 +136,8 @@ class Display
     //void drawJpeg(const char *filename, int xpos, int ypos);
     void getTouchWhileFunction(bool pressed);
     void initScrollValues(bool tte = false);
-    void jpegInfo();
-    void jpegRender(int xpos, int ypos);
+    //void jpegInfo();
+    //void jpegRender(int xpos, int ypos);
     void listDir(fs::FS &fs, const char * dirname, uint8_t levels);
     void listFiles();
     void main(uint8_t scan_mode);

esp32_marauder/EvilPortal.cpp

@@ -1,5 +1,9 @@
 #include "EvilPortal.h"
 
+#ifdef HAS_PSRAM
+  char* index_html = nullptr;
+#endif
+
 AsyncWebServer server(80);
 
 EvilPortal::EvilPortal() {
@@ -23,6 +27,13 @@ void EvilPortal::setup() {
   #endif
 }
 
+void EvilPortal::cleanup() {
+  #ifdef HAS_PSRAM
+    free(index_html);
+    index_html = nullptr;
+  #endif
+}
+
 bool EvilPortal::begin(LinkedList<ssid>* ssids, LinkedList<AccessPoint>* access_points) {
   if (!this->setAP(ssids, access_points))
     return false;
@@ -43,13 +54,47 @@ String EvilPortal::get_password() {
 }
 
 void EvilPortal::setupServer() {
-  server.on("/", HTTP_GET, [this](AsyncWebServerRequest *request) {
-    request->send_P(200, "text/html", index_html);
-    Serial.println("client connected");
-    #ifdef HAS_SCREEN
-      this->sendToDisplay("Client connected to server");
+  #ifndef HAS_PSRAM
+    server.on("/", HTTP_GET, [this](AsyncWebServerRequest *request) {
+      request->send_P(200, "text/html", index_html);
+      Serial.println("client connected");
+      #ifdef HAS_SCREEN
+        this->sendToDisplay("Client connected to server");
+      #endif
+    });
+  #else
+    server.on("/", HTTP_GET, [this](AsyncWebServerRequest *request) {
+      request->send(200, "text/html", index_html);
+      Serial.println("client connected");
+      #ifdef HAS_SCREEN
+        this->sendToDisplay("Client connected to server");
+      #endif
+    });
+  #endif
+
+  const char* captiveEndpoints[] = {
+    "/hotspot-detect.html",
+    "/library/test/success.html",
+    "/success.txt",
+    "/generate_204",
+    "/gen_204",
+    "/ncsi.txt",
+    "/connecttest.txt",
+    "/redirect"
+  };
+
+  for (int i = 0; i < sizeof(captiveEndpoints) / sizeof(captiveEndpoints[0]); i++) {
+    
+    #ifndef HAS_PSRAM
+      server.on(captiveEndpoints[i], HTTP_GET, [this](AsyncWebServerRequest *request){
+        request->send_P(200, "text/html", index_html);
+      });
+    #else
+      server.on(captiveEndpoints[i], HTTP_GET, [this](AsyncWebServerRequest *request){
+        request->send(200, "text/html", index_html);
+      });
     #endif
-  });
+  }
 
   server.on("/get-ap-name", HTTP_GET, [this](AsyncWebServerRequest *request) {
     request->send(200, "text/plain", WiFi.softAPSSID());
@@ -82,7 +127,13 @@ void EvilPortal::setupServer() {
 void EvilPortal::setHtmlFromSerial() {
   Serial.println("Setting HTML from serial...");
   const char *htmlStr = Serial.readString().c_str();
-  strncpy(index_html, htmlStr, strlen(htmlStr));
+  #ifdef HAS_PSRAM
+    index_html = (char*) ps_malloc(MAX_HTML_SIZE);
+  #endif
+  strlcpy(index_html, htmlStr, strlen(htmlStr));
+  #ifdef HAS_PSRAM
+    index_html[MAX_HTML_SIZE - 1] = '\0';
+  #endif
   this->has_html = true;
   this->using_serial_html = true;
   Serial.println("html set");
@@ -123,7 +174,13 @@ bool EvilPortal::setHtml() {
       if (isPrintable(c))
         html.concat(c);
     }
-    strncpy(index_html, html.c_str(), strlen(html.c_str()));
+    #ifdef HAS_PSRAM
+      index_html = (char*) ps_malloc(MAX_HTML_SIZE);
+    #endif
+    strlcpy(index_html, html.c_str(), strlen(html.c_str()));
+    #ifdef HAS_PSRAM
+      index_html[MAX_HTML_SIZE - 1] = '\0';
+    #endif
     this->has_html = true;
     Serial.println("html set");
     html_file.close();

esp32_marauder/EvilPortal.h

@@ -37,7 +37,12 @@ extern Buffer buffer_obj;
 #define WIFI_SCAN_EVIL_PORTAL 30
 
 char apName[MAX_AP_NAME_SIZE] = "PORTAL";
-char index_html[MAX_HTML_SIZE] = "TEST";
+
+#ifndef HAS_PSRAM
+  char index_html[MAX_HTML_SIZE] = "TEST";
+#else
+  extern char* index_html;
+#endif
 
 struct ssid {
   String essid;
@@ -51,7 +56,8 @@ struct AccessPoint {
   uint8_t channel;
   uint8_t bssid[6];
   bool selected;
-  LinkedList<char>* beacon;
+ // LinkedList<char>* beacon;
+  char beacon[2];
   int8_t rssi;
   LinkedList<uint16_t>* stations;
   uint16_t packets;
@@ -106,6 +112,7 @@ class EvilPortal {
 
     LinkedList<String>* html_files;
 
+    void cleanup();
     String get_user_name();
     String get_password();
     void setup();

esp32_marauder/Keyboard.cpp

@@ -0,0 +1,269 @@
+#include "Keyboard.h"
+
+#ifdef MARAUDER_CARDPUTER
+#include <driver/gpio.h>
+#include <Arduino.h>
+
+#define digitalWrite(pin, level) gpio_set_level((gpio_num_t)pin, level)
+#define digitalRead(pin) gpio_get_level((gpio_num_t)pin)
+
+void Keyboard_Class::_set_output(const std::vector<int> &pinList,
+                                 uint8_t output)
+{
+    output = output & 0B00000111;
+
+    digitalWrite(pinList[0], (output & 0B00000001));
+    digitalWrite(pinList[1], (output & 0B00000010));
+    digitalWrite(pinList[2], (output & 0B00000100));
+}
+
+uint8_t Keyboard_Class::_get_input(const std::vector<int> &pinList)
+{
+    uint8_t buffer = 0x00;
+    uint8_t pin_value = 0x00;
+
+    for (int i = 0; i < 7; i++)
+    {
+        pin_value = (digitalRead(pinList[i]) == 1) ? 0x00 : 0x01;
+        pin_value = pin_value << i;
+        buffer = buffer | pin_value;
+    }
+
+    return buffer;
+}
+
+void Keyboard_Class::begin()
+{
+    for (auto i : output_list)
+    {
+        gpio_reset_pin((gpio_num_t)i);
+        gpio_set_direction((gpio_num_t)i, GPIO_MODE_OUTPUT);
+        gpio_set_pull_mode((gpio_num_t)i, GPIO_PULLUP_PULLDOWN);
+        digitalWrite(i, 0);
+    }
+
+    for (auto i : input_list)
+    {
+        gpio_reset_pin((gpio_num_t)i);
+        gpio_set_direction((gpio_num_t)i, GPIO_MODE_INPUT);
+        gpio_set_pull_mode((gpio_num_t)i, GPIO_PULLUP_ONLY);
+    }
+
+    _set_output(output_list, 0);
+}
+
+uint8_t Keyboard_Class::getKey(Point2D_t keyCoor)
+{
+    uint8_t ret = 0;
+
+    if ((keyCoor.x < 0) || (keyCoor.y < 0))
+    {
+        return 0;
+    }
+    if (_keys_state_buffer.ctrl || _keys_state_buffer.shift ||
+        _is_caps_locked)
+    {
+        ret = _key_value_map[keyCoor.y][keyCoor.x].value_second;
+    }
+    else
+    {
+        ret = _key_value_map[keyCoor.y][keyCoor.x].value_first;
+    }
+    return ret;
+}
+
+void Keyboard_Class::updateKeyList()
+{
+    _key_list_buffer.clear();
+    Point2D_t coor;
+    uint8_t input_value = 0;
+
+    for (int i = 0; i < 8; i++)
+    {
+        _set_output(output_list, i);
+        input_value = _get_input(input_list);
+        /* If key pressed */
+
+        if (input_value)
+        {
+            /* Get X */
+            for (int j = 0; j < 7; j++)
+            {
+                if (input_value & (0x01 << j))
+                {
+                    coor.x = (i > 3) ? X_map_chart[j].x_1 : X_map_chart[j].x_2;
+
+                    /* Get Y */
+                    coor.y = (i > 3) ? (i - 4) : i;
+                    // printf("%d,%d\t", coor.x, coor.y);
+
+                    /* Keep the same as picture */
+                    coor.y = -coor.y;
+                    coor.y = coor.y + 3;
+
+                    _key_list_buffer.push_back(coor);
+                }
+            }
+        }
+    }
+}
+
+uint8_t Keyboard_Class::isPressed()
+{
+    return _key_list_buffer.size();
+}
+
+bool Keyboard_Class::isChange()
+{
+    if (_last_key_size != _key_list_buffer.size())
+    {
+        _last_key_size = _key_list_buffer.size();
+        return true;
+    }
+    else
+    {
+        return false;
+    }
+}
+
+String Keyboard_Class::getPressedKeysString() {
+    updateKeyList();
+    String pressed = "";
+
+    for (auto &keyCoor : _key_list_buffer) {
+        pressed += getKey(keyCoor);
+    }
+
+    return pressed;
+}
+
+bool Keyboard_Class::isKeyPressed(char c)
+{
+    if (_key_list_buffer.size())
+    {
+        for (const auto &i : _key_list_buffer)
+        {
+            if (getKey(i) == c)
+                return true;
+        }
+    }
+    return false;
+}
+
+#include <cstring>
+
+void Keyboard_Class::updateKeysState()
+{
+    _keys_state_buffer.reset();
+    _key_pos_print_keys.clear();
+    _key_pos_hid_keys.clear();
+    _key_pos_modifier_keys.clear();
+
+    // Get special keys
+    for (auto &i : _key_list_buffer)
+    {
+        // modifier
+        if (getKeyValue(i).value_first == KEY_FN)
+        {
+            _keys_state_buffer.fn = true;
+            continue;
+        }
+        if (getKeyValue(i).value_first == KEY_OPT)
+        {
+            _keys_state_buffer.opt = true;
+            continue;
+        }
+
+        if (getKeyValue(i).value_first == KEY_LEFT_CTRL)
+        {
+            _keys_state_buffer.ctrl = true;
+            _key_pos_modifier_keys.push_back(i);
+            continue;
+        }
+
+        if (getKeyValue(i).value_first == KEY_LEFT_SHIFT)
+        {
+            _keys_state_buffer.shift = true;
+            _key_pos_modifier_keys.push_back(i);
+            continue;
+        }
+
+        if (getKeyValue(i).value_first == KEY_LEFT_ALT)
+        {
+            _keys_state_buffer.alt = true;
+            _key_pos_modifier_keys.push_back(i);
+            continue;
+        }
+
+        // function
+        if (getKeyValue(i).value_first == KEY_TAB)
+        {
+            _keys_state_buffer.tab = true;
+            _key_pos_hid_keys.push_back(i);
+            continue;
+        }
+
+        if (getKeyValue(i).value_first == KEY_BACKSPACE)
+        {
+            _keys_state_buffer.del = true;
+            _key_pos_hid_keys.push_back(i);
+            continue;
+        }
+
+        if (getKeyValue(i).value_first == KEY_ENTER)
+        {
+            _keys_state_buffer.enter = true;
+            _key_pos_hid_keys.push_back(i);
+            continue;
+        }
+
+        if (getKeyValue(i).value_first == ' ')
+        {
+            _keys_state_buffer.space = true;
+        }
+        _key_pos_hid_keys.push_back(i);
+        _key_pos_print_keys.push_back(i);
+    }
+
+    for (auto &i : _key_pos_modifier_keys)
+    {
+        uint8_t key = getKeyValue(i).value_first;
+        _keys_state_buffer.modifier_keys.push_back(key);
+    }
+
+    for (auto &k : _keys_state_buffer.modifier_keys)
+    {
+        _keys_state_buffer.modifiers |= (1 << (k - 0x80));
+    }
+
+    for (auto &i : _key_pos_hid_keys)
+    {
+        uint8_t k = getKeyValue(i).value_first;
+        if (k == KEY_TAB || k == KEY_BACKSPACE || k == KEY_ENTER)
+        {
+            _keys_state_buffer.hid_keys.push_back(k);
+            continue;
+        }
+        uint8_t key = _kb_asciimap[k];
+        if (key)
+        {
+            _keys_state_buffer.hid_keys.push_back(key);
+        }
+    }
+
+    // Deal what left
+    for (auto &i : _key_pos_print_keys)
+    {
+        if (_keys_state_buffer.ctrl || _keys_state_buffer.shift ||
+            _is_caps_locked)
+        {
+            _keys_state_buffer.word.push_back(getKeyValue(i).value_second);
+        }
+        else
+        {
+            _keys_state_buffer.word.push_back(getKeyValue(i).value_first);
+        }
+    }
+}
+
+#endif

esp32_marauder/Keyboard.h

@@ -0,0 +1,206 @@
+#pragma once
+
+#ifndef Keyboard_h
+#define Keyboard_h
+
+#include "configs.h"
+
+#ifdef MARAUDER_CARDPUTER
+
+/**
+ * @file keyboard.h
+ * @author Forairaaaaa
+ * @brief
+ * @version 0.1
+ * @date 2023-09-22
+ *
+ * @copyright Copyright (c) 2023
+ *
+ */
+#include <iostream>
+#include <vector>
+#include "Arduino.h"
+#include "Keyboard_def.h"
+#include "configs.h"
+
+struct Chart_t
+{
+    uint8_t value;
+    uint8_t x_1;
+    uint8_t x_2;
+};
+
+struct Point2D_t
+{
+    int x;
+    int y;
+};
+
+const std::vector<int> output_list = {8, 9, 11};
+const std::vector<int> input_list = {13, 15, 3, 4, 5, 6, 7};
+
+const Chart_t X_map_chart[7] = {{1, 0, 1}, {2, 2, 3}, {4, 4, 5}, {8, 6, 7}, {16, 8, 9}, {32, 10, 11}, {64, 12, 13}};
+
+struct KeyValue_t
+{
+    const char value_first;
+    const char value_second;
+};
+
+const KeyValue_t _key_value_map[4][14] = {{{'`', '~'},
+                                           {'1', '!'},
+                                           {'2', '@'},
+                                           {'3', '#'},
+                                           {'4', '$'},
+                                           {'5', '%'},
+                                           {'6', '^'},
+                                           {'7', '&'},
+                                           {'8', '*'},
+                                           {'9', '('},
+                                           {'0', ')'},
+                                           {'-', '_'},
+                                           {'=', '+'},
+                                           {KEY_BACKSPACE, KEY_BACKSPACE}},
+                                          {{KEY_TAB, KEY_TAB},
+                                           {'q', 'Q'},
+                                           {'w', 'W'},
+                                           {'e', 'E'},
+                                           {'r', 'R'},
+                                           {'t', 'T'},
+                                           {'y', 'Y'},
+                                           {'u', 'U'},
+                                           {'i', 'I'},
+                                           {'o', 'O'},
+                                           {'p', 'P'},
+                                           {'[', '{'},
+                                           {']', '}'},
+                                           {'\\', '|'}},
+                                          {{KEY_FN, KEY_FN},
+                                           {KEY_LEFT_SHIFT, KEY_LEFT_SHIFT},
+                                           {'a', 'A'},
+                                           {'s', 'S'},
+                                           {'d', 'D'},
+                                           {'f', 'F'},
+                                           {'g', 'G'},
+                                           {'h', 'H'},
+                                           {'j', 'J'},
+                                           {'k', 'K'},
+                                           {'l', 'L'},
+                                           {';', ':'},
+                                           {'\'', '\"'},
+                                           {KEY_ENTER, KEY_ENTER}},
+                                          {{KEY_LEFT_CTRL, KEY_LEFT_CTRL},
+                                           {KEY_OPT, KEY_OPT},
+                                           {KEY_LEFT_ALT, KEY_LEFT_ALT},
+                                           {'z', 'Z'},
+                                           {'x', 'X'},
+                                           {'c', 'C'},
+                                           {'v', 'V'},
+                                           {'b', 'B'},
+                                           {'n', 'N'},
+                                           {'m', 'M'},
+                                           {',', '<'},
+                                           {'.', '>'},
+                                           {'/', '?'},
+                                           {' ', ' '}}};
+
+class Keyboard_Class
+{
+public:
+    struct KeysState
+    {
+        bool tab = false;
+        bool fn = false;
+        bool shift = false;
+        bool ctrl = false;
+        bool opt = false;
+        bool alt = false;
+        bool del = false;
+        bool enter = false;
+        bool space = false;
+        uint8_t modifiers = 0;
+
+        std::vector<char> word;
+        std::vector<uint8_t> hid_keys;
+        std::vector<uint8_t> modifier_keys;
+
+        void reset()
+        {
+            tab = false;
+            fn = false;
+            shift = false;
+            ctrl = false;
+            opt = false;
+            alt = false;
+            del = false;
+            enter = false;
+            space = false;
+            modifiers = 0;
+            word.clear();
+            hid_keys.clear();
+            modifier_keys.clear();
+        }
+    };
+
+private:
+    std::vector<Point2D_t> _key_list_buffer;
+    std::vector<Point2D_t> _key_pos_print_keys; // only text: eg A,B,C
+    std::vector<Point2D_t> _key_pos_hid_keys;   // print key + space, enter, del
+    std::vector<Point2D_t>
+        _key_pos_modifier_keys; // modifier key: eg shift, ctrl, alt
+    KeysState _keys_state_buffer;
+    bool _is_caps_locked;
+    uint8_t _last_key_size;
+
+    void _set_output(const std::vector<int> &pinList, uint8_t output);
+    uint8_t _get_input(const std::vector<int> &pinList);
+
+public:
+    const char _ascii_list[95] = {'a','b','c','d','e','f','g','h','i','j','k','l','m','n','o','p',
+                            'q','r','s','t','u','v','w','x','y','z','A','B','C','D','E','F',
+                            'G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V',
+                            'W','X','Y','Z',' ','0','1','2','3','4','5','6','7','8','9','-',
+                            '=','[',']',';','\'',',','.','/','`','\\','_','+','{','}',':',
+                            '"','<','>','?','~','|','!','@','#','$','%','^','&','*','(',')'};
+                            
+    Keyboard_Class() : _is_caps_locked(false)
+    {
+    }
+
+    void begin();
+    uint8_t getKey(Point2D_t keyCoor);
+
+    void updateKeyList();
+    inline std::vector<Point2D_t> &keyList()
+    {
+        return _key_list_buffer;
+    }
+
+    inline KeyValue_t getKeyValue(const Point2D_t &keyCoor)
+    {
+        return _key_value_map[keyCoor.y][keyCoor.x];
+    }
+
+    uint8_t isPressed();
+    bool isChange();
+    bool isKeyPressed(char c);
+    String getPressedKeysString();
+
+    void updateKeysState();
+    inline KeysState &keysState()
+    {
+        return _keys_state_buffer;
+    }
+
+    inline bool capslocked(void)
+    {
+        return _is_caps_locked;
+    }
+    inline void setCapsLocked(bool isLocked)
+    {
+        _is_caps_locked = isLocked;
+    }
+};
+#endif
+
+#endif

esp32_marauder/Keyboard_def.h

@@ -0,0 +1,155 @@
+#ifndef M5CARDPUTER_KB_KEYS_DEF_H
+#define M5CARDPUTER_KB_KEYS_DEF_H
+
+#include "configs.h"
+
+#ifdef MARAUDER_CARDPUTER
+
+#define SHIFT 0x80
+
+#define KEY_LEFT_CTRL 0x80
+#define KEY_LEFT_SHIFT 0x81
+#define KEY_LEFT_ALT 0x82
+
+#define KEY_FN 0xff
+#define KEY_OPT 0x00
+
+#define KEY_BACKSPACE 0x2a
+#define KEY_TAB 0x2b
+#define KEY_ENTER 0x28
+
+const uint8_t _kb_asciimap[128] = {
+    0x00,          // NUL
+    0x00,          // SOH
+    0x00,          // STX
+    0x00,          // ETX
+    0x00,          // EOT
+    0x00,          // ENQ
+    0x00,          // ACK
+    0x00,          // BEL
+    KEY_BACKSPACE, // BS	Backspace
+    KEY_TAB,       // TAB	Tab
+    KEY_ENTER,     // LF	Enter
+    0x00,          // VT
+    0x00,          // FF
+    0x00,          // CR
+    0x00,          // SO
+    0x00,          // SI
+    0x00,          // DEL
+    0x00,          // DC1
+    0x00,          // DC2
+    0x00,          // DC3
+    0x00,          // DC4
+    0x00,          // NAK
+    0x00,          // SYN
+    0x00,          // ETB
+    0x00,          // CAN
+    0x00,          // EM
+    0x00,          // SUB
+    0x00,          // ESC
+    0x00,          // FS
+    0x00,          // GS
+    0x00,          // RS
+    0x00,          // US
+
+    0x2c,         //  ' '
+    0x1e | SHIFT, // !
+    0x34 | SHIFT, // "
+    0x20 | SHIFT, // #
+    0x21 | SHIFT, // $
+    0x22 | SHIFT, // %
+    0x24 | SHIFT, // &
+    0x34,         // '
+    0x26 | SHIFT, // (
+    0x27 | SHIFT, // )
+    0x25 | SHIFT, // *
+    0x2e | SHIFT, // +
+    0x36,         // ,
+    0x2d,         // -
+    0x37,         // .
+    0x38,         // /
+    0x27,         // 0
+    0x1e,         // 1
+    0x1f,         // 2
+    0x20,         // 3
+    0x21,         // 4
+    0x22,         // 5
+    0x23,         // 6
+    0x24,         // 7
+    0x25,         // 8
+    0x26,         // 9
+    0x33 | SHIFT, // :
+    0x33,         // ;
+    0x36 | SHIFT, // <
+    0x2e,         // =
+    0x37 | SHIFT, // >
+    0x38 | SHIFT, // ?
+    0x1f | SHIFT, // @
+    0x04 | SHIFT, // A
+    0x05 | SHIFT, // B
+    0x06 | SHIFT, // C
+    0x07 | SHIFT, // D
+    0x08 | SHIFT, // E
+    0x09 | SHIFT, // F
+    0x0a | SHIFT, // G
+    0x0b | SHIFT, // H
+    0x0c | SHIFT, // I
+    0x0d | SHIFT, // J
+    0x0e | SHIFT, // K
+    0x0f | SHIFT, // L
+    0x10 | SHIFT, // M
+    0x11 | SHIFT, // N
+    0x12 | SHIFT, // O
+    0x13 | SHIFT, // P
+    0x14 | SHIFT, // Q
+    0x15 | SHIFT, // R
+    0x16 | SHIFT, // S
+    0x17 | SHIFT, // T
+    0x18 | SHIFT, // U
+    0x19 | SHIFT, // V
+    0x1a | SHIFT, // W
+    0x1b | SHIFT, // X
+    0x1c | SHIFT, // Y
+    0x1d | SHIFT, // Z
+    0x2f,         // [
+    0x31,         // bslash
+    0x30,         // ]
+    0x23 | SHIFT, // ^
+    0x2d | SHIFT, // _
+    0x35,         // `
+    0x04,         // a
+    0x05,         // b
+    0x06,         // c
+    0x07,         // d
+    0x08,         // e
+    0x09,         // f
+    0x0a,         // g
+    0x0b,         // h
+    0x0c,         // i
+    0x0d,         // j
+    0x0e,         // k
+    0x0f,         // l
+    0x10,         // m
+    0x11,         // n
+    0x12,         // o
+    0x13,         // p
+    0x14,         // q
+    0x15,         // r
+    0x16,         // s
+    0x17,         // t
+    0x18,         // u
+    0x19,         // v
+    0x1a,         // w
+    0x1b,         // x
+    0x1c,         // y
+    0x1d,         // z
+    0x2f | SHIFT, // {
+    0x31 | SHIFT, // |
+    0x30 | SHIFT, // }
+    0x35 | SHIFT, // ~
+    0             // DEL
+};
+
+#endif
+
+#endif

esp32_marauder/LedInterface.cpp

@@ -6,14 +6,17 @@ LedInterface::LedInterface() {
 
 void LedInterface::RunSetup() {
   //Serial.println("Setting neopixel to black...");
-  strip.setBrightness(0);
-  strip.begin();
-  strip.setPixelColor(0, strip.Color(0, 0, 0));
-  strip.show();
-  //delay(100);
-  strip.setBrightness(50);
-  strip.setPixelColor(0, strip.Color(0, 0, 0));
-  strip.show();
+  #ifdef HAS_NEOPIXEL_LED
+    strip.setBrightness(0);
+    strip.begin();
+    strip.setPixelColor(0, strip.Color(0, 0, 0));
+    strip.show();
+    //delay(100);
+    strip.setBrightness(50);
+    strip.setPixelColor(0, strip.Color(0, 0, 0));
+    strip.show();
+  #endif
+
   this->initTime = millis();
 }
 
@@ -50,8 +53,10 @@ uint8_t LedInterface::getMode() {
 }
 
 void LedInterface::setColor(int r, int g, int b) {
-  strip.setPixelColor(0, strip.Color(r, g, b));
-  strip.show();  
+  #ifdef HAS_NEOPIXEL_LED
+    strip.setPixelColor(0, strip.Color(r, g, b));
+    strip.show();
+  #endif
 }
 
 void LedInterface::sniffLed() {
@@ -67,25 +72,29 @@ void LedInterface::ledOff() {
 }
 
 void LedInterface::rainbow() {
-  strip.setPixelColor(0, this->Wheel((0 * 256 / 100 + this->wheel_pos) % 256));
-  strip.show();
+  #ifdef HAS_NEOPIXEL_LED
+    strip.setPixelColor(0, this->Wheel((0 * 256 / 100 + this->wheel_pos) % 256));
+    strip.show();
 
-  this->current_fade_itter++;
+    this->current_fade_itter++;
 
-  this->wheel_pos = this->wheel_pos - this->wheel_speed;
-  if (this->wheel_pos < 0)
-    this->wheel_pos = 255;
+    this->wheel_pos = this->wheel_pos - this->wheel_speed;
+    if (this->wheel_pos < 0)
+      this->wheel_pos = 255;
+  #endif
 }
 
 uint32_t LedInterface::Wheel(byte WheelPos) {
-  WheelPos = 255 - WheelPos;
-  if(WheelPos < 85) {
-    return strip.Color(255 - WheelPos * 3, 0, WheelPos * 3);
-  }
-  if(WheelPos < 170) {
-    WheelPos -= 85;
-    return strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
-  }
-  WheelPos -= 170;
-  return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
+  #ifdef HAS_NEOPIXEL_LED
+    WheelPos = 255 - WheelPos;
+    if(WheelPos < 85) {
+      return strip.Color(255 - WheelPos * 3, 0, WheelPos * 3);
+    }
+    if(WheelPos < 170) {
+      WheelPos -= 85;
+      return strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
+    }
+    WheelPos -= 170;
+    return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
+  #endif
 }

esp32_marauder/MenuFunctions.h

@@ -5,6 +5,10 @@
 
 #include "configs.h"
 
+#ifdef MARAUDER_CARDPUTER
+  #include "Keyboard.h"
+#endif
+
 #ifdef HAS_SCREEN
 
 #define BATTERY_ANALOG_ON 0
@@ -16,11 +20,21 @@
 
 #ifdef HAS_BUTTONS
   #include "Switches.h"
-  extern Switches u_btn;
-  extern Switches d_btn;
-  extern Switches l_btn;
-  extern Switches r_btn;
-  extern Switches c_btn;
+  #if (U_BTN >= 0)
+    extern Switches u_btn;
+  #endif
+  #if (D_BTN >= 0)
+    extern Switches d_btn;
+  #endif
+  #if (L_BTN >= 0)
+    extern Switches l_btn;
+  #endif
+  #if (R_BTN >= 0)
+    extern Switches r_btn;
+  #endif
+  #if (C_BTN >= 0)
+    extern Switches c_btn;
+  #endif
 #endif
 
 extern WiFiScan wifi_scan_obj;
@@ -74,6 +88,10 @@ extern Settings settings_obj;
 #define DISABLE_TOUCH 34
 #define FLIPPER 35
 #define BLANK 36
+#define PINESCAN_SNIFF 37 // Use blanks icon
+#define MULTISSID_SNIFF 37 // Use blanks icon
+#define JOINED 38
+#define FORCE 39
 
 PROGMEM void my_disp_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p);
 PROGMEM bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data);
@@ -82,6 +100,7 @@ PROGMEM static lv_disp_buf_t disp_buf;
 PROGMEM static lv_color_t buf[LV_HOR_RES_MAX * 10];
 
 PROGMEM static void ta_event_cb(lv_obj_t * ta, lv_event_t event);
+PROGMEM static void join_wifi_keyboard_event_cb(lv_obj_t * keyboard, lv_event_t event);
 PROGMEM static void add_ssid_keyboard_event_cb(lv_obj_t * keyboard, lv_event_t event);
 PROGMEM static void html_list_cb(lv_obj_t * btn, lv_event_t event);
 PROGMEM static void ap_list_cb(lv_obj_t * btn, lv_event_t event);
@@ -161,18 +180,20 @@ class MenuFunctions
 
     // WiFi menu stuff
     Menu wifiSnifferMenu;
+    Menu wifiScannerMenu;
     Menu wifiAttackMenu;
     #ifdef HAS_GPS
       Menu wardrivingMenu;
     #endif
     Menu wifiGeneralMenu;
     Menu wifiAPMenu;
+    Menu wifiIPMenu;
     #ifdef HAS_BT
       Menu airtagMenu;
     #endif
-    #ifndef HAS_ILI9341
+    //#ifndef HAS_ILI9341
       Menu wifiStationMenu;
-    #endif
+    //#endif
 
     // WiFi General Menu
     Menu htmlMenu;
@@ -181,6 +202,7 @@ class MenuFunctions
     Menu genAPMacMenu;
     Menu cloneAPMacMenu;
     Menu setMacMenu;
+    Menu selectProbeSSIDsMenu;
 
     // Bluetooth menu stuff
     Menu bluetoothSnifferMenu;
@@ -193,7 +215,7 @@ class MenuFunctions
 
     // Menu icons
 
-
+    void displayMenuButtons();
     uint16_t getColor(uint16_t color);
     void drawAvgLine(int16_t value);
     void drawMaxLine(int16_t value, uint16_t color);
@@ -211,8 +233,13 @@ class MenuFunctions
     void displaySetting(String key, Menu* menu, int index);
     void buttonSelected(int b, int x = -1);
     void buttonNotSelected(int b, int x = -1);
-    #if (!defined(HAS_ILI9341) && defined(HAS_BUTTONS))
-      void miniKeyboard(Menu * targetMenu);
+    //#if (!defined(HAS_ILI9341) && defined(HAS_BUTTONS))
+      String miniKeyboard(Menu * targetMenu, bool do_pass = false);
+    //#endif
+
+    #ifdef MARAUDER_CARDPUTER
+      Keyboard_Class M5CardputerKeyboard = Keyboard_Class();
+      bool isKeyPressed(char c);
     #endif
 
   public:
@@ -247,6 +274,7 @@ class MenuFunctions
 
     String loaded_file = "";
 
+    void joinWiFiGFX(String essid);
     void setGraphScale(float scale);
     void initLVGL();
     void deinitLVGL();

esp32_marauder/SDInterface.cpp

@@ -1,6 +1,10 @@
 #include "SDInterface.h"
 #include "lang_var.h"
 
+#ifdef HAS_C5_SD
+  SDInterface::SDInterface(SPIClass* spi, int cs)
+    : _spi(spi), _cs(cs) {}
+#endif
 
 bool SDInterface::initSD() {
   #ifdef HAS_SD
@@ -21,7 +25,7 @@ bool SDInterface::initSD() {
     pinMode(SD_CS, OUTPUT);
 
     delay(10);
-    #if (defined(MARAUDER_M5STICKC)) || (defined(HAS_CYD_TOUCH))
+    #if (defined(MARAUDER_M5STICKC)) || (defined(HAS_CYD_TOUCH)) || (defined(MARAUDER_CARDPUTER))
       /* Set up SPI SD Card using external pin header
       StickCPlus Header - SPI SD Card Reader
                   3v3   -   3v3
@@ -33,14 +37,22 @@ bool SDInterface::initSD() {
       */
       #if defined(MARAUDER_M5STICKC)
         enum { SPI_SCK = 0, SPI_MISO = 36, SPI_MOSI = 26 };
-      #elif defined(MARAUDER_CYD_MICRO)
+      #elif defined(HAS_CYD_TOUCH) || defined(MARAUDER_CARDPUTER)
         enum { SPI_SCK = SD_SCK, SPI_MISO = SD_MISO, SPI_MOSI = SD_MOSI };
       #else
         enum { SPI_SCK = 0, SPI_MISO = 36, SPI_MOSI = 26 };
       #endif
-      this->spiExt = new SPIClass();
+      #ifndef MARAUDER_CARDPUTER
+        this->spiExt = new SPIClass();
+      #else
+        this->spiExt = new SPIClass(FSPI);
+      #endif
+      Serial.println("Using external SPI configuration...");
       this->spiExt->begin(SPI_SCK, SPI_MISO, SPI_MOSI, SD_CS);
       if (!SD.begin(SD_CS, *(this->spiExt))) {
+    #elif defined(HAS_C5_SD)
+      Serial.println("Using C5 SD configuration...");
+      if (!SD.begin(SD_CS, *_spi)) {
     #else
       if (!SD.begin(SD_CS)) {
     #endif
@@ -51,19 +63,9 @@ bool SDInterface::initSD() {
     else {
       this->supported = true;
       this->cardType = SD.cardType();
-      //if (cardType == CARD_MMC)
-      //  Serial.println(F("SD: MMC Mounted"));
-      //else if(cardType == CARD_SD)
-      //    Serial.println(F("SD: SDSC Mounted"));
-      //else if(cardType == CARD_SDHC)
-      //    Serial.println(F("SD: SDHC Mounted"));
-      //else
-      //    Serial.println(F("SD: UNKNOWN Card Mounted"));
 
       this->cardSizeMB = SD.cardSize() / (1024 * 1024);
     
-      //Serial.printf("SD Card Size: %lluMB\n", this->cardSizeMB);
-
       if (this->supported) {
         const int NUM_DIGITS = log10(this->cardSizeMB) + 1;
 

esp32_marauder/SDInterface.h

@@ -6,7 +6,13 @@
 #include "configs.h"
 
 #include "settings.h"
+#ifdef HAS_C5_SD
+  #include "FS.h"
+#endif
 #include "SD.h"
+#ifdef HAS_C5_SD
+  #include "SPI.h"
+#endif
 #include "Buffer.h"
 #ifdef HAS_SCREEN
   #include "Display.h"
@@ -26,12 +32,19 @@ extern Settings settings_obj;
 class SDInterface {
 
   private:
-  #if (defined(MARAUDER_M5STICKC) || defined(HAS_CYD_TOUCH))
+  #if (defined(MARAUDER_M5STICKC) || defined(HAS_CYD_TOUCH) || defined(MARAUDER_CARDPUTER))
     SPIClass *spiExt;
+  #elif defined(HAS_C5_SD)
+    SPIClass* _spi;
+    int _cs;
   #endif
     bool checkDetectPin();
 
   public:
+    #ifdef HAS_C5_SD
+      SDInterface(SPIClass* spi, int cs);
+    #endif
+
     uint8_t cardType;
     //uint64_t cardSizeBT;
     //uint64_t cardSizeKB;

esp32_marauder/WiFiScan.h

@@ -11,14 +11,18 @@
 #include <vector>
 
 #ifdef HAS_BT
-  #include <NimBLEDevice.h>
+  #include <NimBLEDevice.h> // 1.3.8
 #endif
 
 #include <WiFi.h>
+#include <ESP32Ping.h>
 #include "EvilPortal.h"
 #include <math.h>
 #include "esp_wifi.h"
 #include "esp_wifi_types.h"
+#ifdef HAS_DUAL_BAND
+  #include "esp_system.h"
+#endif
 #ifdef HAS_BT
   #include "esp_bt.h"
 #endif
@@ -102,13 +106,27 @@
 #define BT_SCAN_ANALYZER 47
 #define WIFI_SCAN_PACKET_RATE 48
 #define WIFI_SCAN_AP_STA 49
+#define WIFI_SCAN_PINESCAN 50
+#define WIFI_SCAN_MULTISSID 51
+#define WIFI_CONNECTED 52
+#define WIFI_PING_SCAN 53
+#define WIFI_PORT_SCAN_ALL 54
 
 #define BASE_MULTIPLIER 4
 
 #define ANALYZER_NAME_REFRESH 100 // Number of events to refresh the name
 
+// PineScan and Multi SSID
+#define MULTISSID_THRESHOLD 3 // Threshold For Multi SSID
+#define MAX_MULTISSID_ENTRIES 100 // Max number of confirmed MultiSSIDs to store
+#define MAX_AP_ENTRIES 100 // Max number of APs to track for analysis
+#define MAX_DISPLAY_ENTRIES 1 // Max Unique MACs to display
+#define MAX_PINESCAN_ENTRIES 100 // PineScan Max Entries
+
 #define MAX_CHANNEL     14
 
+#define MAX_PORT 65535
+
 #define WIFI_SECURITY_OPEN   0
 #define WIFI_SECURITY_WEP    1
 #define WIFI_SECURITY_WPA    2
@@ -162,6 +180,10 @@ extern Settings settings_obj;
 
 esp_err_t esp_wifi_80211_tx(wifi_interface_t ifx, const void *buffer, int len, bool en_sys_seq);
 
+#ifdef HAS_DUAL_BAND
+  esp_err_t esp_base_mac_addr_set(uint8_t *Mac);
+#endif
+
 /*struct ssid {
   String essid;
   uint8_t channel;
@@ -201,21 +223,28 @@ struct Flipper {
   String name;
 };
 
+#ifdef HAS_PSRAM
+  extern struct mac_addr* mac_history;
+#endif
+
 class WiFiScan
 {
   private:
     // Wardriver thanks to https://github.com/JosephHewitt
-    struct mac_addr mac_history[mac_history_len];
+    #ifndef HAS_PSRAM
+      struct mac_addr mac_history[mac_history_len];
+    #endif
 
     uint8_t ap_mac[6] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
     uint8_t sta_mac[6] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
 
+    uint8_t dual_band_channels[DUAL_BAND_CHANNELS] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 32, 36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76, 80, 84, 88, 92, 96, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144, 149, 153, 157, 161, 165, 169, 173, 177};
+
+    uint8_t dual_band_channel_index = 0;
+
     // Settings
     uint mac_history_cursor = 0;
     uint8_t channel_hop_delay = 1;
-    bool force_pmkid = false;
-    bool force_probe = false;
-    bool save_pcap = false;
   
     int x_pos; //position along the graph x axis
     float y_pos_x; //current graph y axis position of X value
@@ -232,6 +261,8 @@ class WiFiScan
 
     bool wsl_bypass_enabled = false;
 
+    bool scan_complete = false;
+
     //int num_beacon = 0; // GREEN
     //int num_probe = 0; // BLUE
     //int num_deauth = 0; // RED
@@ -278,6 +309,74 @@ class WiFiScan
       WifiMgmtHdr hdr;
     } wifi_ieee80211_packet_t;
 
+		// Tracking structures for PineScan (similar to MultiSSID)
+    struct PineScanTracker {
+        uint8_t mac[6];
+        bool suspicious_oui;
+        bool tag_and_susp_cap;
+        uint8_t channel;
+        int8_t rssi;
+        bool reported;
+    };
+
+    // For confirmed Pineapple devices
+    struct ConfirmedPineScan {
+        uint8_t mac[6];
+        String detection_type;
+        String essid;
+        uint8_t channel;
+        int8_t rssi;
+        bool displayed;
+    };
+    LinkedList<PineScanTracker>* pinescan_trackers;
+    LinkedList<ConfirmedPineScan>* confirmed_pinescan;
+    bool pinescan_list_full_reported;
+    
+    // Security Conditions For Pineapple detection
+    enum SecurityCondition {
+        NONE = 0x00,
+        SUSPICIOUS_WHEN_OPEN = 0x01,
+        SUSPICIOUS_WHEN_PROTECTED = 0x02,
+        SUSPICIOUS_ALWAYS = 0x04
+    };
+
+    // SuspiciousVendor struct
+    struct SuspiciousVendor {
+        const char* vendor_name;
+        uint8_t security_flags;
+        uint32_t ouis[20];                 // Array of OUIs (max 20 per vendor)
+        uint8_t oui_count;                 // Number of OUIs for this vendor
+    };
+
+    // Declare the table for Pineapple
+    static const SuspiciousVendor suspicious_vendors[];
+    static const int NUM_SUSPICIOUS_VENDORS;
+
+    // Track for AP list limit (Uninitialised, Done in RunSetup)
+    bool ap_list_full_reported;
+
+    // MULTI SSID STRUCTS
+
+    struct MultiSSIDTracker {
+        uint8_t mac[6];
+        uint16_t ssid_hashes[MULTISSID_THRESHOLD];
+        uint8_t unique_ssid_count;
+        bool reported;
+    };
+
+    // New struct for confirmed MultiSSID devices
+    struct ConfirmedMultiSSID {
+        uint8_t mac[6];
+        String essid;
+        uint8_t channel;
+        int8_t rssi;
+        uint8_t ssid_count;
+        bool displayed;
+    };
+    LinkedList<MultiSSIDTracker>* multissid_trackers;
+    LinkedList<ConfirmedMultiSSID>* confirmed_multissid;
+    bool multissid_list_full_reported;
+
     // barebones packet
     uint8_t packet[128] = { 0x80, 0x00, 0x00, 0x00, //Frame Control, Duration
                     /*4*/   0xff, 0xff, 0xff, 0xff, 0xff, 0xff, //Destination address 
@@ -339,6 +438,10 @@ class WiFiScan
       NimBLEAdvertisementData GetUniversalAdvertisementData(EBLEPayloadType type);
     #endif
 
+    void pingScan();
+    void portScan(uint8_t scan_mode = WIFI_PORT_SCAN_ALL);
+    bool isHostAlive(IPAddress ip);
+    bool checkHostPort(IPAddress ip, uint16_t port, uint16_t timeout = 100);
     String extractManufacturer(const uint8_t* payload);
     int checkMatchAP(char addr[]);
     bool beaconHasWPS(const uint8_t* payload, int len);
@@ -383,6 +486,8 @@ class WiFiScan
     void RunGPSNmea();
     void RunMimicFlood(uint8_t scan_mode, uint16_t color);
     void RunPwnScan(uint8_t scan_mode, uint16_t color);
+    void RunPineScan(uint8_t scan_mode, uint16_t color);
+    void RunMultiSSIDScan(uint8_t scan_mode, uint16_t color);
     void RunBeaconScan(uint8_t scan_mode, uint16_t color);
     void RunRawScan(uint8_t scan_mode, uint16_t color);
     void RunStationScan(uint8_t scan_mode, uint16_t color);
@@ -395,6 +500,8 @@ class WiFiScan
     void RunSwiftpairSpam(uint8_t scan_mode, uint16_t color);
     void RunLvJoinWiFi(uint8_t scan_mode, uint16_t color);
     void RunEvilPortal(uint8_t scan_mode, uint16_t color);
+    void RunPingScan(uint8_t scan_mode, uint16_t color);
+    void RunPortScanAll(uint8_t scan_mode, uint16_t color);
     bool checkMem();
     void parseBSSID(const char* bssidStr, uint8_t* bssid);
 
@@ -417,6 +524,10 @@ class WiFiScan
     int8_t min_rssi = 0;
     int8_t max_rssi = -128;
 
+    bool force_pmkid = false;
+    bool force_probe = false;
+    bool save_pcap = false;
+
     String analyzer_name_string = "";
     
     uint8_t analyzer_frames_recvd = 0;
@@ -432,11 +543,20 @@ class WiFiScan
     bool orient_display = false;
     bool wifi_initialized = false;
     bool ble_initialized = false;
+    bool wifi_connected = false;
 
     String free_ram = "";
     String old_free_ram = "";
     String connected_network = "";
 
+    IPAddress ip_addr;
+    IPAddress gateway;
+    IPAddress subnet;
+
+    IPAddress current_scan_ip;
+
+    uint16_t current_scan_port = 1;
+
     String dst_mac = "ff:ff:ff:ff:ff:ff";
     byte src_mac[6] = {};
 
@@ -451,31 +571,35 @@ class WiFiScan
 
     wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
 
-    wifi_init_config_t cfg2 = { \
-        .event_handler = &esp_event_send_internal, \
-        .osi_funcs = &g_wifi_osi_funcs, \
-        .wpa_crypto_funcs = g_wifi_default_wpa_crypto_funcs, \
-        .static_rx_buf_num = 6,\
-        .dynamic_rx_buf_num = 6,\
-        .tx_buf_type = 0,\
-        .static_tx_buf_num = 1,\
-        .dynamic_tx_buf_num = WIFI_DYNAMIC_TX_BUFFER_NUM,\
-        .cache_tx_buf_num = 0,\
-        .csi_enable = false,\
-        .ampdu_rx_enable = false,\
-        .ampdu_tx_enable = false,\
-        .amsdu_tx_enable = false,\
-        .nvs_enable = false,\
-        .nano_enable = WIFI_NANO_FORMAT_ENABLED,\
-        .rx_ba_win = 6,\
-        .wifi_task_core_id = WIFI_TASK_CORE_ID,\
-        .beacon_max_len = 752, \
-        .mgmt_sbuf_num = 8, \
-        .feature_caps = g_wifi_feature_caps, \
-        .sta_disconnected_pm = WIFI_STA_DISCONNECTED_PM_ENABLED,  \
-        .espnow_max_encrypt_num = 0, \
-        .magic = WIFI_INIT_CONFIG_MAGIC\
-    };
+    #ifndef HAS_DUAL_BAND
+      wifi_init_config_t cfg2 = { \
+          .event_handler = &esp_event_send_internal, \
+          .osi_funcs = &g_wifi_osi_funcs, \
+          .wpa_crypto_funcs = g_wifi_default_wpa_crypto_funcs, \
+          .static_rx_buf_num = 6,\
+          .dynamic_rx_buf_num = 6,\
+          .tx_buf_type = 0,\
+          .static_tx_buf_num = 1,\
+          .dynamic_tx_buf_num = WIFI_DYNAMIC_TX_BUFFER_NUM,\
+          .cache_tx_buf_num = 0,\
+          .csi_enable = false,\
+          .ampdu_rx_enable = false,\
+          .ampdu_tx_enable = false,\
+          .amsdu_tx_enable = false,\
+          .nvs_enable = false,\
+          .nano_enable = WIFI_NANO_FORMAT_ENABLED,\
+          .rx_ba_win = 6,\
+          .wifi_task_core_id = WIFI_TASK_CORE_ID,\
+          .beacon_max_len = 752, \
+          .mgmt_sbuf_num = 8, \
+          .feature_caps = g_wifi_feature_caps, \
+          .sta_disconnected_pm = WIFI_STA_DISCONNECTED_PM_ENABLED,  \
+          .espnow_max_encrypt_num = 0, \
+          .magic = WIFI_INIT_CONFIG_MAGIC\
+      };
+    #else
+      wifi_init_config_t cfg2 = WIFI_INIT_CONFIG_DEFAULT();
+    #endif
 
     wifi_config_t ap_config;
 
@@ -491,15 +615,18 @@ class WiFiScan
     void RunSetup();
     int clearSSIDs();
     int clearAPs();
+    int clearIPs();
     int clearAirtags();
     int clearFlippers();
     int clearStations();
+    int clearPineScanTrackers();
+    int clearMultiSSID();
     bool addSSID(String essid);
     int generateSSIDs(int count = 20);
     bool shutdownWiFi();
     bool shutdownBLE();
     bool scanning();
-    //void joinWiFi(String ssid, String password);
+    bool joinWiFi(String ssid, String password, bool gui = true);
     String getStaMAC();
     String getApMAC();
     String freeRAM();
@@ -546,6 +673,9 @@ class WiFiScan
     static void activeEapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void eapolSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
     static void wifiSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type);
+    static void pineScanSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type); // Pineapple
+    static int extractPineScanChannel(const uint8_t* payload, int len); // Pineapple
+    static void multiSSIDSnifferCallback(void* buf, wifi_promiscuous_pkt_type_t type); // MultiSSID
 
     /*#ifdef HAS_BT
       enum EBLEPayloadType

esp32_marauder/configs.h

@@ -18,23 +18,31 @@
   //#define MARAUDER_KIT
   //#define GENERIC_ESP32
   //#define MARAUDER_FLIPPER
+  //#define MARAUDER_MULTIBOARD_S3
   //#define ESP32_LDDB
   //#define MARAUDER_DEV_BOARD_PRO
   //#define XIAO_ESP32_S3
   //#define MARAUDER_REV_FEATHER
   //#define MARAUDER_CYD_MICRO // 2432S028
+  //#define MARAUDER_CYD_2USB // Another 2432S028 but it has tWo UsBs OoOoOoO
   //#define MARAUDER_CYD_GUITION // ESP32-2432S024 GUITION
+  //#define MARAUDER_C5
+  //#define MARAUDER_CARDPUTER
   //// END BOARD TARGETS
 
-  #define MARAUDER_VERSION "v1.4.6"
+  #define MARAUDER_VERSION "v1.8.1"
 
   #define GRAPH_REFRESH   100
 
+  #define DUAL_BAND_CHANNELS 51
+
   //// HARDWARE NAMES
   #ifdef MARAUDER_M5STICKC
     #define HARDWARE_NAME "M5Stick-C Plus"
   #elif defined(MARAUDER_M5STICKCP2)
     #define HARDWARE_NAME "M5Stick-C Plus2"
+  #elif defined(MARAUDER_CARDPUTER)
+    #define HARDWARE_NAME "M5 Cardputer"
   #elif defined(MARAUDER_MINI)
     #define HARDWARE_NAME "Marauder Mini"
   #elif defined(MARAUDER_V7)
@@ -51,18 +59,24 @@
     #define HARDWARE_NAME "Marauder v6.1"
   #elif defined(MARAUDER_CYD_MICRO)
     #define HARDWARE_NAME "CYD 2432S028"
+  #elif defined(MARAUDER_CYD_2USB)
+    #define HARDWARE_NAME "CYD 2432S028 2USB"  
   #elif defined(MARAUDER_CYD_GUITION)
     #define HARDWARE_NAME "CYD 2432S024 GUITION"
   #elif defined(MARAUDER_KIT)
     #define HARDWARE_NAME "Marauder Kit"
   #elif defined(MARAUDER_FLIPPER)
     #define HARDWARE_NAME "Flipper Zero Dev Board"
+  #elif defined(MARAUDER_MULTIBOARD_S3)
+    #define HARDWARE_NAME "Flipper Zero Multi Board S3"
   #elif defined(ESP32_LDDB)
     #define HARDWARE_NAME "ESP32 LDDB"
   #elif defined(MARAUDER_DEV_BOARD_PRO)
     #define HARDWARE_NAME "Flipper Zero Dev Board Pro"
   #elif defined(XIAO_ESP32_S3)
     #define HARDWARE_NAME "XIAO ESP32 S3"
+  #elif defined(MARAUDER_C5)
+    #define HARDWARE_NAME "ESP32-C5 DevKit"
   #else
     #define HARDWARE_NAME "ESP32"
   #endif
@@ -72,6 +86,7 @@
  //// BOARD FEATURES
   #if defined(MARAUDER_M5STICKC) || defined(MARAUDER_M5STICKCP2)
     //#define FLIPPER_ZERO_HAT
+    #define HAS_MINI_KB
     #define HAS_BATTERY
     #define HAS_BT
     #define HAS_BUTTONS
@@ -85,9 +100,26 @@
     #define HAS_GPS
   #endif
 
+  #if defined(MARAUDER_CARDPUTER)
+    //#define FLIPPER_ZERO_HAT
+    #define HAS_MINI_KB
+    //#define HAS_BATTERY
+    #define HAS_BT
+    #define HAS_BUTTONS
+    //#define HAS_NEOPIXEL_LED
+    //#define HAS_PWR_MGMT
+    #define HAS_SCREEN
+    #define HAS_MINI_SCREEN
+    #define HAS_SD
+    #define USE_SD
+    #define HAS_TEMP_SENSOR
+    #define HAS_GPS
+  #endif
+
   #ifdef MARAUDER_MINI
     //#define FLIPPER_ZERO_HAT
     //#define HAS_BATTERY
+    #define HAS_MINI_KB
     #define HAS_BT
     #define HAS_BUTTONS
     #define HAS_NEOPIXEL_LED
@@ -102,6 +134,7 @@
 
   #ifdef MARAUDER_V7
     //#define FLIPPER_ZERO_HAT
+    #define HAS_MINI_KB
     #define HAS_BATTERY
     #define HAS_BT
     #define HAS_BT_REMOTE
@@ -118,6 +151,7 @@
 
   #ifdef MARAUDER_V7_1
     //#define FLIPPER_ZERO_HAT
+    #define HAS_MINI_KB
     #define HAS_BATTERY
     #define HAS_BT
     #define HAS_BT_REMOTE
@@ -137,6 +171,7 @@
     //#define FLIPPER_ZERO_HAT
     //#define HAS_BATTERY
     //#define HAS_BT
+    #define HAS_MINI_KB
     #define HAS_BUTTONS
     #define HAS_NEOPIXEL_LED
     //#define HAS_PWR_MGMT
@@ -149,6 +184,7 @@
   #endif
 
   #ifdef MARAUDER_V4
+    #define HAS_TOUCH
     //#define FLIPPER_ZERO_HAT
     #define HAS_BATTERY
     #define HAS_BT
@@ -164,6 +200,7 @@
   #endif
 
   #if defined(MARAUDER_V6) || defined(MARAUDER_V6_1)
+    #define HAS_TOUCH
     //#define FLIPPER_ZERO_HAT
     #define HAS_BATTERY
     #define HAS_BT
@@ -180,9 +217,10 @@
   #endif
 
   #ifdef MARAUDER_CYD_MICRO
+    #define HAS_TOUCH
     #define HAS_FLIPPER_LED
     //#define FLIPPER_ZERO_HAT
-    //#define HAS_BATTERY
+    #define HAS_BATTERY
     #define HAS_BT
     #define HAS_BT_REMOTE
     #define HAS_BUTTONS
@@ -197,7 +235,28 @@
     #define HAS_CYD_TOUCH
   #endif
 
+  #ifdef MARAUDER_CYD_2USB
+    #define HAS_TOUCH
+    #define HAS_FLIPPER_LED
+    //#define FLIPPER_ZERO_HAT
+    #define HAS_BATTERY
+    #define HAS_BT
+    #define HAS_BT_REMOTE
+    #define HAS_BUTTONS
+    //#define HAS_NEOPIXEL_LED
+    //#define HAS_PWR_MGMT
+    #define HAS_SCREEN
+    #define HAS_FULL_SCREEN
+    #define HAS_SD
+    #define USE_SD
+    #define HAS_TEMP_SENSOR
+    #define HAS_GPS
+    #define HAS_CYD_TOUCH
+    #define HAS_CYD_PORTRAIT
+  #endif
+
   #ifdef MARAUDER_CYD_GUITION
+    #define HAS_TOUCH
     #define HAS_FLIPPER_LED
     //#define FLIPPER_ZERO_HAT
     //#define HAS_BATTERY
@@ -216,6 +275,7 @@
   #endif
 
   #ifdef MARAUDER_KIT
+    #define HAS_TOUCH
     //#define FLIPPER_ZERO_HAT
     #define HAS_BATTERY
     #define HAS_BT
@@ -259,6 +319,22 @@
     //#define HAS_TEMP_SENSOR
   #endif
 
+  #ifdef MARAUDER_MULTIBOARD_S3
+    #define HAS_FLIPPER_LED
+    //#define FLIPPER_ZERO_HAT
+    //#define HAS_BATTERY
+    #define HAS_BT
+    //#define HAS_BUTTONS
+    //#define HAS_NEOPIXEL_LED
+    //#define HAS_PWR_MGMT
+    //#define HAS_SCREEN
+    #define HAS_GPS
+    #define HAS_SD
+    #define USE_SD
+    //#define HAS_PSRAM
+    //#define HAS_TEMP_SENSOR
+  #endif
+
   #ifdef ESP32_LDDB
     //#define FLIPPER_ZERO_HAT
     //#define HAS_BATTERY
@@ -299,6 +375,24 @@
     //#define HAS_TEMP_SENSOR
     //#define HAS_GPS
   #endif
+
+  #ifdef MARAUDER_C5
+    //#define HAS_FLIPPER_LED
+    //#define FLIPPER_ZERO_HAT
+    //#define HAS_BATTERY
+    //#define HAS_BT
+    //#define HAS_BUTTONS
+    //#define HAS_NEOPIXEL_LED
+    //#define HAS_PWR_MGMT
+    //#define HAS_SCREEN
+    #define HAS_GPS
+    #define HAS_C5_SD
+    #define HAS_SD
+    #define USE_SD
+    #define HAS_DUAL_BAND
+    //#define HAS_PSRAM
+    //#define HAS_TEMP_SENSOR
+  #endif
   //// END BOARD FEATURES
 
   //// POWER MANAGEMENT
@@ -423,6 +517,26 @@
       #define D_PULL true
     #endif
 
+    #ifdef MARAUDER_CARDPUTER
+      #define L_BTN -1
+      #define C_BTN 0
+      #define U_BTN -1
+      #define R_BTN -1
+      #define D_BTN -1
+
+      //#define HAS_L
+      //#define HAS_R
+      //#define HAS_U
+      //#define HAS_D
+      #define HAS_C
+
+      #define L_PULL true
+      #define C_PULL true
+      #define U_PULL true
+      #define R_PULL true
+      #define D_PULL true
+    #endif
+
     #ifdef MARAUDER_V6
       #define L_BTN -1
       #define C_BTN 0
@@ -483,6 +597,26 @@
       #define D_PULL true
     #endif
 
+    #ifdef MARAUDER_CYD_2USB
+      #define L_BTN -1
+      #define C_BTN 0
+      #define U_BTN -1
+      #define R_BTN -1
+      #define D_BTN -1
+
+      //#define HAS_L
+      //#define HAS_R
+      //#define HAS_U
+      //#define HAS_D
+      #define HAS_C
+
+      #define L_PULL true
+      #define C_PULL true
+      #define U_PULL true
+      #define R_PULL true
+      #define D_PULL true
+    #endif
+
     #ifdef MARAUDER_CYD_GUITION
       #define L_BTN -1
       #define C_BTN 0
@@ -539,6 +673,8 @@
 
       #define EXT_BUTTON_WIDTH 0
 
+      #define SCREEN_ORIENTATION 1
+
       #define CHAR_WIDTH 6
       #define SCREEN_WIDTH TFT_HEIGHT // Originally 240
       #define SCREEN_HEIGHT TFT_WIDTH // Originally 320
@@ -611,6 +747,8 @@
 
       #define EXT_BUTTON_WIDTH 0
 
+      #define SCREEN_ORIENTATION 0
+
       #define CHAR_WIDTH 6
       #define SCREEN_WIDTH TFT_HEIGHT // Originally 240
       #define SCREEN_HEIGHT TFT_WIDTH // Originally 320
@@ -653,6 +791,78 @@
 
     #endif
 
+    #ifdef MARAUDER_CARDPUTER
+      #define SCREEN_CHAR_WIDTH 40
+      //#define TFT_MISO -1
+      #define TFT_MOSI 35
+      #define TFT_SCLK 36
+      #define TFT_CS 37
+      #define TFT_DC 34
+      #define TFT_RST 33
+      #define TFT_BL 38
+      // #define TOUCH_CS -1
+
+      #define SCREEN_BUFFER
+
+      #define MAX_SCREEN_BUFFER 9
+
+      #define BANNER_TEXT_SIZE 1
+
+      #ifndef TFT_WIDTH
+        #define TFT_WIDTH 135
+      #endif
+
+      #ifndef TFT_HEIGHT
+        #define TFT_HEIGHT 240
+      #endif
+
+      #define GRAPH_VERT_LIM TFT_HEIGHT/2
+
+      #define EXT_BUTTON_WIDTH 0
+
+      #define SCREEN_ORIENTATION 1
+
+      #define CHAR_WIDTH 6
+      #define SCREEN_WIDTH TFT_HEIGHT // Originally 240
+      #define SCREEN_HEIGHT TFT_WIDTH // Originally 320
+      #define HEIGHT_1 TFT_WIDTH
+      #define WIDTH_1 TFT_WIDTH
+      #define STANDARD_FONT_CHAR_LIMIT (TFT_WIDTH/6) // number of characters on a single line with normal font
+      #define TEXT_HEIGHT (TFT_HEIGHT/10) // Height of text to be printed and scrolled
+      #define BOT_FIXED_AREA 0 // Number of lines in bottom fixed area (lines counted from bottom of screen)
+      #define TOP_FIXED_AREA 48 // Number of lines in top fixed area (lines counted from top of screen)
+      #define YMAX TFT_HEIGHT // Bottom of screen area
+      #define minimum(a,b)     (((a) < (b)) ? (a) : (b))
+      //#define MENU_FONT NULL
+      #define MENU_FONT &FreeMono9pt7b // Winner
+      //#define MENU_FONT &FreeMonoBold9pt7b
+      //#define MENU_FONT &FreeSans9pt7b
+      //#define MENU_FONT &FreeSansBold9pt7b
+      #define BUTTON_SCREEN_LIMIT 6
+      #define BUTTON_ARRAY_LEN 100
+      #define STATUS_BAR_WIDTH (TFT_HEIGHT/16)
+      #define LVGL_TICK_PERIOD 6
+    
+      #define FRAME_X 100
+      #define FRAME_Y 64
+      #define FRAME_W 120
+      #define FRAME_H 50
+    
+      // Red zone size
+      #define REDBUTTON_X FRAME_X
+      #define REDBUTTON_Y FRAME_Y
+      #define REDBUTTON_W (FRAME_W/2)
+      #define REDBUTTON_H FRAME_H
+    
+      // Green zone size
+      #define GREENBUTTON_X (REDBUTTON_X + REDBUTTON_W)
+      #define GREENBUTTON_Y FRAME_Y
+      #define GREENBUTTON_W (FRAME_W/2)
+      #define GREENBUTTON_H FRAME_H
+    
+      #define STATUSBAR_COLOR 0x4A49
+
+    #endif
 
     #ifdef MARAUDER_V4
       #define SCREEN_CHAR_WIDTH 40
@@ -673,6 +883,8 @@
 
       #define EXT_BUTTON_WIDTH 20
 
+      #define SCREEN_ORIENTATION 0
+
       #define CHAR_WIDTH 12
       #define SCREEN_WIDTH TFT_WIDTH
       #define SCREEN_HEIGHT TFT_HEIGHT
@@ -741,6 +953,8 @@
       #define SCREEN_BUFFER
 
       #define MAX_SCREEN_BUFFER 22
+
+      #define SCREEN_ORIENTATION 0
     
       #define CHAR_WIDTH 12
       #define SCREEN_WIDTH TFT_WIDTH
@@ -806,6 +1020,76 @@
       #define SCREEN_BUFFER
 
       #define MAX_SCREEN_BUFFER 22
+
+      #define SCREEN_ORIENTATION 0
+    
+      #define CHAR_WIDTH 12
+      #define SCREEN_WIDTH TFT_WIDTH
+      #define SCREEN_HEIGHT TFT_HEIGHT
+      #define HEIGHT_1 TFT_WIDTH
+      #define WIDTH_1 TFT_HEIGHT
+      #define STANDARD_FONT_CHAR_LIMIT (TFT_WIDTH/6) // number of characters on a single line with normal font
+      #define TEXT_HEIGHT 16 // Height of text to be printed and scrolled
+      #define BOT_FIXED_AREA 0 // Number of lines in bottom fixed area (lines counted from bottom of screen)
+      #define TOP_FIXED_AREA 48 // Number of lines in top fixed area (lines counted from top of screen)
+      #define YMAX 320 // Bottom of screen area
+      #define minimum(a,b)     (((a) < (b)) ? (a) : (b))
+      //#define MENU_FONT NULL
+      #define MENU_FONT &FreeMono9pt7b // Winner
+      //#define MENU_FONT &FreeMonoBold9pt7b
+      //#define MENU_FONT &FreeSans9pt7b
+      //#define MENU_FONT &FreeSansBold9pt7b
+      #define BUTTON_SCREEN_LIMIT 12
+      #define BUTTON_ARRAY_LEN BUTTON_SCREEN_LIMIT
+      #define STATUS_BAR_WIDTH 16
+      #define LVGL_TICK_PERIOD 6
+
+      #define FRAME_X 100
+      #define FRAME_Y 64
+      #define FRAME_W 120
+      #define FRAME_H 50
+    
+      // Red zone size
+      #define REDBUTTON_X FRAME_X
+      #define REDBUTTON_Y FRAME_Y
+      #define REDBUTTON_W (FRAME_W/2)
+      #define REDBUTTON_H FRAME_H
+    
+      // Green zone size
+      #define GREENBUTTON_X (REDBUTTON_X + REDBUTTON_W)
+      #define GREENBUTTON_Y FRAME_Y
+      #define GREENBUTTON_W (FRAME_W/2)
+      #define GREENBUTTON_H FRAME_H
+    
+      #define STATUSBAR_COLOR 0x4A49
+    
+      #define KIT_LED_BUILTIN 13
+    #endif
+
+    #if defined(MARAUDER_CYD_2USB)
+      #define SCREEN_CHAR_WIDTH 40
+      #define HAS_ILI9341
+      #define HAS_ST7789
+    
+      #define BANNER_TEXT_SIZE 2
+
+      #ifndef TFT_WIDTH
+        #define TFT_WIDTH 240
+      #endif
+
+      #ifndef TFT_HEIGHT
+        #define TFT_HEIGHT 320
+      #endif
+
+      #define GRAPH_VERT_LIM TFT_HEIGHT/2
+
+      #define EXT_BUTTON_WIDTH 20
+
+      #define SCREEN_BUFFER
+
+      #define MAX_SCREEN_BUFFER 22
+
+      #define SCREEN_ORIENTATION 0
     
       #define CHAR_WIDTH 12
       #define SCREEN_WIDTH TFT_WIDTH
@@ -873,6 +1157,8 @@
       #define SCREEN_BUFFER
 
       #define MAX_SCREEN_BUFFER 22
+
+      #define SCREEN_ORIENTATION 0
     
       #define CHAR_WIDTH 12
       #define SCREEN_WIDTH TFT_WIDTH
@@ -940,6 +1226,8 @@
       #define MAX_SCREEN_BUFFER 22
 
       #define EXT_BUTTON_WIDTH 0
+
+      #define SCREEN_ORIENTATION 0
     
       #define CHAR_WIDTH 12
       #define SCREEN_WIDTH TFT_WIDTH
@@ -1007,6 +1295,8 @@
       #define MAX_SCREEN_BUFFER 22
 
       #define EXT_BUTTON_WIDTH 0
+
+      #define SCREEN_ORIENTATION 0
     
       #define CHAR_WIDTH 12
       #define SCREEN_WIDTH TFT_WIDTH
@@ -1071,6 +1361,8 @@
       #define KIT
 
       #define EXT_BUTTON_WIDTH 20
+
+      #define SCREEN_ORIENTATION 0
     
       #define CHAR_WIDTH 12
       #define SCREEN_WIDTH TFT_WIDTH
@@ -1145,6 +1437,8 @@
 
       #define EXT_BUTTON_WIDTH 0
 
+      #define SCREEN_ORIENTATION 0
+
       #define CHAR_WIDTH 6
       #define SCREEN_WIDTH TFT_WIDTH // Originally 240
       #define SCREEN_HEIGHT TFT_HEIGHT // Originally 320
@@ -1216,6 +1510,8 @@
 
       #define EXT_BUTTON_WIDTH 0
 
+      #define SCREEN_ORIENTATION 1
+
       #define CHAR_WIDTH 6
       #define SCREEN_WIDTH TFT_WIDTH // Originally 240
       #define SCREEN_HEIGHT TFT_HEIGHT // Originally 320
@@ -1318,6 +1614,25 @@
     //#define BUTTON_ARRAY_LEN 5
   #endif
 
+  #if defined(MARAUDER_CYD_2USB)
+    #define BANNER_TIME 100
+    
+    #define COMMAND_PREFIX "!"
+    
+    // Keypad start position, key sizes and spacing
+    #define KEY_X 120 // Centre of key
+    #define KEY_Y 50
+    #define KEY_W 240 // Width and height
+    #define KEY_H 22
+    #define KEY_SPACING_X 0 // X and Y gap
+    #define KEY_SPACING_Y 1
+    #define KEY_TEXTSIZE 1   // Font size multiplier
+    #define ICON_W 22
+    #define ICON_H 22
+    #define BUTTON_PADDING 22
+    //#define BUTTON_ARRAY_LEN 5
+  #endif
+
   #if defined(MARAUDER_CYD_GUITION)
     #define BANNER_TIME 100
     
@@ -1447,6 +1762,24 @@
     #define ICON_H 22
     #define BUTTON_PADDING 60
   #endif
+
+  #ifdef MARAUDER_CARDPUTER
+    #define BANNER_TIME 50
+    
+    #define COMMAND_PREFIX "!"
+    
+    // Keypad start position, key sizes and spacing
+    #define KEY_X (TFT_WIDTH/2) // Centre of key
+    #define KEY_Y (TFT_HEIGHT/5)
+    #define KEY_W TFT_HEIGHT // Width and height
+    #define KEY_H (TFT_HEIGHT/17)
+    #define KEY_SPACING_X 0 // X and Y gap
+    #define KEY_SPACING_Y 1
+    #define KEY_TEXTSIZE 1   // Font size multiplier
+    #define ICON_W 22
+    #define ICON_H 22
+    #define BUTTON_PADDING 60
+  #endif
   //// END MENU DEFINITIONS
 
   //// SD DEFINITIONS
@@ -1468,6 +1801,10 @@
       #define SD_CS 5
     #endif
 
+    #ifdef MARAUDER_CYD_2USB
+      #define SD_CS 5
+    #endif
+
     #ifdef MARAUDER_CYD_GUITION
       #define SD_CS 5
     #endif
@@ -1496,10 +1833,22 @@
       #define SD_CS -1
     #endif
 
+    #ifdef MARAUDER_CARDPUTER
+      //#define SS      12
+      #define SD_CS   12
+      #define SD_SCK  40
+      #define SD_MISO 39
+      #define SD_MOSI 14
+    #endif
+
     #ifdef MARAUDER_FLIPPER
       #define SD_CS 10
     #endif
 
+    #ifdef MARAUDER_MULTIBOARD_S3
+      #define SD_CS 10
+    #endif
+
     #ifdef ESP32_LDDB
       #define SD_CS 4
     #endif
@@ -1512,6 +1861,10 @@
       #define SD_CS 3
     #endif
 
+    #ifdef MARAUDER_C5
+      #define SD_CS 10
+    #endif
+
   #endif
   //// END SD DEFINITIONS
 
@@ -1536,11 +1889,14 @@
   #define TFTLIME      18
   //// END SPACE SAVING COLORS
 
+  #define TFT_FARTGRAY 0x528a
+
   //// SCREEN STUFF
   #ifndef HAS_SCREEN
 
     #define BANNER_TIME GRAPH_REFRESH
 
+    #define TFT_BLACK 0
     #define TFT_WHITE 0
     #define TFT_CYAN 0
     #define TFT_BLUE 0
@@ -1568,6 +1924,8 @@
   // These values are in bytes
   #ifdef MARAUDER_M5STICKC
     #define MEM_LOWER_LIM 10000
+  #elif defined(MARAUDER_CARDPUTER)
+    #define MEM_LOWER_LIM 10000
   #elif defined(MARAUDER_MINI)
     #define MEM_LOWER_LIM 10000
   #elif defined(MARAUDER_V7)
@@ -1582,6 +1940,8 @@
     #define MEM_LOWER_LIM 10000
   #elif defined(MARAUDER_CYD_MICRO)
     #define MEM_LOWER_LIM 10000
+  #elif defined(MARAUDER_CYD_2USB)
+    #define MEM_LOWER_LIM 10000
   #elif defined(MARAUDER_CYD_GUITION)
     #define MEM_LOWER_LIM 10000
   #elif defined(MARAUDER_KIT)
@@ -1590,12 +1950,16 @@
     #define MEM_LOWER_LIM 10000
   #elif defined(MARAUDER_FLIPPER)
     #define MEM_LOWER_LIM 10000
+  #elif defined(MARAUDER_MULTIBOARD_S3)
+    #define MEM_LOWER_LIM 10000
   #elif defined(ESP32_LDDB)
     #define MEM_LOWER_LIM 10000
   #elif defined(MARAUDER_DEV_BOARD_PRO)
     #define MEM_LOWER_LIM 10000
   #elif defined(XIAO_ESP32_S3)
     #define MEM_LOWER_LIM 10000
+  #elif defined(MARAUDER_C5)
+    #define MEM_LOWER_LIM 10000
   #endif
   //// END MEMORY LOWER LIMIT STUFF
 
@@ -1610,6 +1974,8 @@
       #define PIN 33
     #elif defined(MARAUDER_CYD_MICRO)
       #define PIN 4
+    #elif defined(MARAUDER_CYD_2USB)
+      #define PIN 4
     #else
       #define PIN 25
     #endif
@@ -1620,7 +1986,7 @@
   //// EVIL PORTAL STUFF
 
   #ifdef HAS_PSRAM
-    #define MAX_HTML_SIZE 28000
+    #define MAX_HTML_SIZE 30000
   #else
     #define MAX_HTML_SIZE 11400
   #endif
@@ -1630,7 +1996,7 @@
   //// GPS STUFF
   #ifdef HAS_GPS
     #ifdef HAS_PSRAM
-      #define mac_history_len 1000
+      #define mac_history_len 500
     #else
       #define mac_history_len 100
     #endif
@@ -1641,8 +2007,12 @@
       #define GPS_RX 13
     #elif defined(MARAUDER_CYD_MICRO)
       #define GPS_SERIAL_INDEX 2
-      #define GPS_TX 27 // Fits the extended I/O
-      #define GPS_RX 22
+      #define GPS_TX 1 // Community pinout matching old forks and even bruce firmware allowing for hardware standardization
+      #define GPS_RX 3
+    #elif defined(MARAUDER_CYD_2USB)
+      #define GPS_SERIAL_INDEX 2
+      #define GPS_TX 1 // Community pinout matching old forks and even bruce firmware allowing for hardware standardization
+      #define GPS_RX 3
     #elif defined(MARAUDER_CYD_GUITION)
       #define GPS_SERIAL_INDEX 2
       #define GPS_TX 21 // Fits the extended I/O
@@ -1675,14 +2045,26 @@
       #define GPS_SERIAL_INDEX 1
       #define GPS_TX 9
       #define GPS_RX 21
+    #elif defined(MARAUDER_MULTIBOARD_S3)
+      #define GPS_SERIAL_INDEX 1
+      #define GPS_TX 9
+      #define GPS_RX 21
     #elif defined(MARAUDER_M5STICKC)
       #define GPS_SERIAL_INDEX 1
       #define GPS_TX 33
       #define GPS_RX 32
+    #elif defined(MARAUDER_CARDPUTER)
+      #define GPS_SERIAL_INDEX 1
+      #define GPS_TX 1
+      #define GPS_RX 2
     #elif defined(MARAUDER_REV_FEATHER)
       #define GPS_SERIAL_INDEX 1
       #define GPS_TX 6
       #define GPS_RX 9
+    #elif defined(MARAUDER_C5)
+      #define GPS_SERIAL_INDEX 1
+      #define GPS_TX 14
+      #define GPS_RX 13
     #endif
   #else
     #define mac_history_len 100
@@ -1732,6 +2114,16 @@
       #define I2C_SCL 27
     #endif
 
+    #ifdef MARAUDER_CYD_MICRO
+      #define I2C_SDA 22
+      #define I2C_SCL 27
+    #endif
+
+    #ifdef MARAUDER_CYD_2USB
+      #define I2C_SDA 22
+      #define I2C_SCL 27
+    #endif
+
   #endif
 
   //// MARAUDER TITLE STUFF
@@ -1741,6 +2133,8 @@
     #define MARAUDER_TITLE_BYTES 13578
   #elif defined(MARAUDER_CYD_MICRO)
     #define MARAUDER_TITLE_BYTES 13578
+  #elif defined(MARAUDER_CYD_2USB)
+    #define MARAUDER_TITLE_BYTES 13578
   #elif defined(MARAUDER_CYD_GUITION)
     #define MARAUDER_TITLE_BYTES 13578
   #elif defined(MARAUDER_KIT)
@@ -1753,6 +2147,8 @@
     #define MARAUDER_TITLE_BYTES 13578
   #elif defined(MARAUDER_REV_FEATHER)
     #define MARAUDER_TITLE_BYTES 13578
+  #elif defined(MARAUDER_C5)
+    #define MARAUDER_TITLE_BYTES 13578
   #else
     #define MARAUDER_TITLE_BYTES 13578
   #endif
@@ -1761,8 +2157,8 @@
   //// PCAP BUFFER STUFF
   
   #ifdef HAS_PSRAM
-    #define BUF_SIZE 16 * 1024 // Had to reduce buffer size to save RAM. GG @spacehuhn
-    #define SNAP_LEN 2 * 4096 // max len of each recieved packet
+    #define BUF_SIZE 8 * 1024 // Had to reduce buffer size to save RAM. GG @spacehuhn
+    #define SNAP_LEN 1 * 4096 // max len of each recieved packet
   #elif !defined(HAS_ILI9341)
     #define BUF_SIZE 8 * 1024 // Had to reduce buffer size to save RAM. GG @spacehuhn
     #define SNAP_LEN 4096 // max len of each recieved packet
@@ -1774,7 +2170,7 @@
   //// PCAP BUFFER STUFF
 
   //// STUPID CYD STUFF
-  #ifdef HAS_CYD_TOUCH
+  #if defined(HAS_CYD_TOUCH) || defined(HAS_C5_SD)
     #ifdef MARAUDER_CYD_MICRO
       #define XPT2046_IRQ  36
       #define XPT2046_MOSI 32
@@ -1786,6 +2182,24 @@
       #define SD_MOSI      23
       #define SD_SCK       18
     #endif
+
+    #ifdef MARAUDER_CYD_2USB
+      #define XPT2046_IRQ  36
+      #define XPT2046_MOSI 32
+      #define XPT2046_MISO 39
+      #define XPT2046_CLK  25
+      #define XPT2046_CS   33
+
+      #define SD_MISO      19
+      #define SD_MOSI      23
+      #define SD_SCK       18
+    #endif
+
+    #ifdef MARAUDER_C5
+      #define SD_MISO 2
+      #define SD_MOSI 7
+      #define SD_SCK  6
+    #endif
   #endif
   //// END STUPID CYD STUFF
 
@@ -1798,12 +2212,24 @@
       #define R_PIN 6
     #endif
 
+    #ifdef MARAUDER_MULTIBOARD_S3
+      #define B_PIN 4
+      #define G_PIN 5
+      #define R_PIN 6
+    #endif
+
     #ifdef MARAUDER_CYD_MICRO
       #define B_PIN 17
       #define G_PIN 16
       #define R_PIN 4
     #endif
 
+    #ifdef MARAUDER_CYD_2USB
+      #define B_PIN 17
+      #define G_PIN 16
+      #define R_PIN 4
+    #endif
+
     #ifdef MARAUDER_CYD_GUITION
       #define B_PIN 17
       #define G_PIN 16
@@ -1812,4 +2238,12 @@
   #endif
 
   //// END FUNNY FLIPPER LED STUFF
+
+  //// WIFI STUFF
+
+  #ifndef HAS_DUAL_BAND
+    #define HOP_DELAY 1000
+  #else
+    #define HOP_DELAY 100
+  #endif
 #endif

esp32_marauder/esp32_marauder.ino

@@ -97,7 +97,7 @@ CommandLine cli_obj;
   MenuFunctions menu_function_obj;
 #endif
 
-#ifdef HAS_SD
+#if defined(HAS_SD) && !defined(HAS_C5_SD)
   SDInterface sd_obj;
 #endif
 
@@ -147,9 +147,22 @@ void backlightOff() {
   #endif
 }
 
+#ifdef HAS_C5_SD
+  SPIClass sharedSPI(SPI);
+  SDInterface sd_obj = SDInterface(&sharedSPI, SD_CS);
+#endif
+
 void setup()
 {
-  esp_spiram_init();
+  #ifndef HAS_DUAL_BAND
+    esp_spiram_init();
+  #endif
+
+  #ifdef HAS_C5_SD
+    Serial.println("Starting shared SPI for C5 SD configuration...");
+    sharedSPI.begin(SD_SCK, SD_MISO, SD_MOSI);
+    delay(100);
+  #endif
 
   #ifdef defined(MARAUDER_M5STICKC) && !defined(MARAUDER_M5STICKCP2)
     axp192_obj.begin();
@@ -175,7 +188,7 @@ void setup()
     digitalWrite(TFT_CS, HIGH);
   #endif
   
-  #ifdef HAS_SD
+  #if defined(HAS_SD) && !defined(HAS_C5_SD)
     pinMode(SD_CS, OUTPUT);
 
     delay(10);
@@ -192,6 +205,14 @@ void setup()
 
   Serial.println("ESP-IDF version is: " + String(esp_get_idf_version()));
 
+  #ifdef HAS_PSRAM
+    if (psramInit()) {
+      Serial.println("PSRAM is correctly initialized");
+    } else {
+      Serial.println("PSRAM not available");
+    }
+  #endif
+
   #ifdef HAS_SCREEN
     display_obj.RunSetup();
     display_obj.tft.setTextColor(TFT_WHITE, TFT_BLACK);
@@ -199,22 +220,17 @@ void setup()
 
   backlightOff();
 
-  // Draw the title screen
-  /*
   #ifdef HAS_SCREEN
-    #ifndef MARAUDER_MINI
-      display_obj.drawJpeg("/marauder3L.jpg", 0 , 0);     // 240 x 320 image
+    #ifndef MARAUDER_CARDPUTER
+      display_obj.tft.drawCentreString("ESP32 Marauder", TFT_WIDTH/2, TFT_HEIGHT * 0.33, 1);
+      display_obj.tft.drawCentreString("JustCallMeKoko", TFT_WIDTH/2, TFT_HEIGHT * 0.5, 1);
+      display_obj.tft.drawCentreString(display_obj.version_number, TFT_WIDTH/2, TFT_HEIGHT * 0.66, 1);
     #else
-      display_obj.drawJpeg("/marauder3L.jpg", 0, 0);
+      display_obj.tft.drawCentreString("ESP32 Marauder", TFT_HEIGHT/2, TFT_WIDTH * 0.33, 1);
+      display_obj.tft.drawCentreString("JustCallMeKoko", TFT_HEIGHT/2, TFT_WIDTH * 0.5, 1);
+      display_obj.tft.drawCentreString(display_obj.version_number, TFT_HEIGHT/2, TFT_WIDTH * 0.66, 1);
     #endif
   #endif
-  */
-
-  #ifdef HAS_SCREEN
-    display_obj.tft.drawCentreString("ESP32 Marauder", TFT_WIDTH/2, TFT_HEIGHT * 0.33, 1);
-    display_obj.tft.drawCentreString("JustCallMeKoko", TFT_WIDTH/2, TFT_HEIGHT * 0.5, 1);
-    display_obj.tft.drawCentreString(display_obj.version_number, TFT_WIDTH/2, TFT_HEIGHT * 0.66, 1);
-  #endif
 
 
   backlightOn(); // Need this
@@ -248,12 +264,6 @@ void setup()
 
   settings_obj.begin();
 
-  wifi_scan_obj.RunSetup();
-
-  //#ifdef HAS_SCREEN
-  //  display_obj.tft.println(F(text_table0[2]));
-  //#endif
-
   buffer_obj = Buffer();
   #if defined(HAS_SD)
     // Do some SD stuff
@@ -262,6 +272,8 @@ void setup()
 
   #endif
 
+  wifi_scan_obj.RunSetup();
+
   #ifdef HAS_SCREEN
     display_obj.tft.setTextColor(TFT_GREEN, TFT_BLACK);
     display_obj.tft.drawCentreString("Initializing...", TFT_WIDTH/2, TFT_HEIGHT * 0.82, 1);
@@ -272,14 +284,6 @@ void setup()
   #ifdef HAS_BATTERY
     battery_obj.RunSetup();
   #endif
-  
-  #ifdef HAS_SCREEN
-    //display_obj.tft.println(F(text_table0[5]));
-  #endif
-
-  #ifdef HAS_SCREEN
-    //display_obj.tft.println(F(text_table0[6]));
-  #endif
 
   #ifdef HAS_BATTERY
     battery_obj.battery_level = battery_obj.getBatteryLevel();
@@ -296,28 +300,12 @@ void setup()
     led_obj.RunSetup();
   #endif
 
-  #ifdef HAS_SCREEN
-    //display_obj.tft.println(F(text_table0[7]));
-
-    //delay(500);
-  #endif
-
   #ifdef HAS_GPS
     gps_obj.begin();
-    //#ifdef HAS_SCREEN
-      //if (gps_obj.getGpsModuleStatus())
-        //display_obj.tft.println("GPS Module connected");
-      //else
-        //display_obj.tft.println("GPS Module NOT connected");
-    //#endif
   #endif
 
-  #ifdef HAS_SCREEN
-    //display_obj.tft.println(F(text_table0[8]));
-  
+  #ifdef HAS_SCREEN  
     display_obj.tft.setTextColor(TFT_WHITE, TFT_BLACK);
-  
-    //delay(2000);
   #endif
 
   #ifdef HAS_SCREEN
@@ -342,7 +330,7 @@ void loop()
     #endif
   #endif
 
-  #ifdef HAS_ILI9341
+  #if (defined(HAS_ILI9341) && !defined(MARAUDER_CYD_2USB))
     #ifdef HAS_BUTTONS
       if (c_btn.isHeld()) {
         if (menu_function_obj.disable_touch)

esp32_marauder/lang_var.h

@@ -103,7 +103,9 @@ PROGMEM const char text1_59[] = "Station Sniff";
 PROGMEM const char text1_60[] = "Clear Stations";
 PROGMEM const char text1_61[] = "Select Stations";
 PROGMEM const char text1_62[] = "Deauth Targeted";
-
+PROGMEM const char text1_63[] = "Detect Pineapple";
+PROGMEM const char text1_64[] = "Detect MultiSSID";
+PROGMEM const char text1_65[] = "Select probe SSIDs";
 
 //SDInterface.cpp texts
 PROGMEM const char text2_0[] = "Error, could not find update.bin";
@@ -179,12 +181,14 @@ PROGMEM const char text4_44[] = " AP Scan ";
 PROGMEM const char text4_45[] = "Clearing Stations...";
 PROGMEM const char text4_46[] = "Stations Cleared: ";
 PROGMEM const char text4_47[] = "Targeted Deauth";
+PROGMEM const char text4_48[] = " Detect Pineapple ";
+PROGMEM const char text4_49[] = " Detect MultiSSID ";
 
 //Making tables
 PROGMEM const char *text_table0[] = {text0_0,text0_1, text0_2, text0_3, text0_4, text0_5, text0_6, text0_7, text0_8};
-PROGMEM const char *text_table1[] = {text1_0,text1_1,text1_2,text1_3,text1_4,text1_5,text1_6,text1_7,text1_8,text1_9,text1_10,text1_11,text1_12,text1_13,text1_14,text1_15,text1_16,text1_17,text1_18,text1_19,text1_20,text1_21,text1_22,text1_23,text1_24,text1_25,text1_26,text1_27,text1_28,text1_29,text1_30,text1_31,text1_32,text1_33,text1_34,text1_35,text1_36,text1_37,text1_38,text1_39,text1_40,text1_41,text1_42,text1_43,text1_44,text1_45,text1_46,text1_47,text1_48,text1_49,text1_50,text1_51,text1_52,text1_53,text1_54,text1_55,text1_56,text1_57,text1_58,text1_59,text1_60,text1_61,text1_62};
+PROGMEM const char *text_table1[] = {text1_0,text1_1,text1_2,text1_3,text1_4,text1_5,text1_6,text1_7,text1_8,text1_9,text1_10,text1_11,text1_12,text1_13,text1_14,text1_15,text1_16,text1_17,text1_18,text1_19,text1_20,text1_21,text1_22,text1_23,text1_24,text1_25,text1_26,text1_27,text1_28,text1_29,text1_30,text1_31,text1_32,text1_33,text1_34,text1_35,text1_36,text1_37,text1_38,text1_39,text1_40,text1_41,text1_42,text1_43,text1_44,text1_45,text1_46,text1_47,text1_48,text1_49,text1_50,text1_51,text1_52,text1_53,text1_54,text1_55,text1_56,text1_57,text1_58,text1_59,text1_60,text1_61,text1_62,text1_63,text1_64, text1_65};
 PROGMEM const char *text_table2[] = {text2_0,text2_1,text2_2,text2_3,text2_4,text2_5,text2_6,text2_7,text2_8,text2_9,text2_10,text2_11,text2_12,text2_13,text2_14};
 PROGMEM const char *text_table3[] = {text3_0,text3_1,text3_2,text3_3,text3_4,text3_5};
-PROGMEM const char *text_table4[] = {text4_0,text4_1,text4_2,text4_3,text4_4,text4_5,text4_6,text4_7,text1_54,text4_9,text4_10,text4_11,text4_12,text4_13,text4_14,text4_15,text4_16,text4_17,text4_18,text4_19,text4_20,text4_21,text4_22,text4_23,text4_24,text4_25,text4_26,text4_27,text4_28,text4_29,text4_30,text4_31,text4_32,text4_33,text4_34,text4_35,text4_36,text4_37,text4_38,text4_39,text4_40,text4_41,text4_42,text4_43,text4_44,text4_45,text4_46,text4_47};
+PROGMEM const char *text_table4[] = {text4_0,text4_1,text4_2,text4_3,text4_4,text4_5,text4_6,text4_7,text1_54,text4_9,text4_10,text4_11,text4_12,text4_13,text4_14,text4_15,text4_16,text4_17,text4_18,text4_19,text4_20,text4_21,text4_22,text4_23,text4_24,text4_25,text4_26,text4_27,text4_28,text4_29,text4_30,text4_31,text4_32,text4_33,text4_34,text4_35,text4_36,text4_37,text4_38,text4_39,text4_40,text4_41,text4_42,text4_43,text4_44,text4_45,text4_46,text4_47,text4_48,text4_49};
 
 #endif

esp32_marauder/utils.h

@@ -4,6 +4,11 @@
 
 #include <Arduino.h>
 #include <vector>
+#include <WiFi.h>
+
+#include "configs.h"
+
+#include "esp_heap_caps.h"
 
 struct mac_addr {
    unsigned char bytes[6];
@@ -13,6 +18,13 @@ struct Station {
   uint8_t mac[6];
   bool selected;
   uint16_t packets;
+  uint16_t ap;
+};
+
+struct ProbeReqSsid {
+    String essid;
+    bool selected;
+    uint8_t requests;
 };
 
 const char apple_ouis[][9] PROGMEM = {
@@ -144,6 +156,35 @@ const char xiaomi_ouis[][9] PROGMEM = {
   "90:4E:91", "C4:0B:CB", "D0:DB:32"
 };
 
+uint8_t getDRAMUsagePercent() {
+  //size_t total = heap_caps_get_total_size(MALLOC_CAP_8BIT);
+  //size_t free = heap_caps_get_free_size(MALLOC_CAP_8BIT);
+  size_t free = ESP.getFreeHeap();
+  size_t total = ESP.getHeapSize();
+  
+  if (total == 0) return 0; // Avoid division by zero
+
+  size_t used = total - free;
+  uint8_t percent = (used * 100) / total;
+  return percent;
+}
+
+#ifdef HAS_PSRAM
+  uint8_t getPSRAMUsagePercent() {
+    //size_t total = heap_caps_get_total_size(MALLOC_CAP_SPIRAM);
+    //size_t free  = heap_caps_get_free_size(MALLOC_CAP_SPIRAM);
+
+    size_t total = ESP.getPsramSize();
+    size_t free = ESP.getFreePsram();
+
+    if (total == 0) return 0; // Avoid division by zero or PSRAM not available
+
+    size_t used = total - free;
+    uint8_t percent = (used * 100) / total;
+    return percent;
+  }
+#endif
+
 String byteArrayToHexString(const std::vector<uint8_t>& byteArray) {
   String result;
 
@@ -316,4 +357,33 @@ String replaceOUIWithManufacturer(const char *sta_addr) {
   return String(manufacturer) + mac_suffix;
 }
 
+IPAddress getNextIP(IPAddress currentIP, IPAddress subnetMask) {
+  // Convert IPAddress to uint32_t
+  uint32_t ipInt = (currentIP[0] << 24) | (currentIP[1] << 16) | (currentIP[2] << 8) | currentIP[3];
+  uint32_t maskInt = (subnetMask[0] << 24) | (subnetMask[1] << 16) | (subnetMask[2] << 8) | subnetMask[3];
+
+  uint32_t networkBase = ipInt & maskInt;
+  uint32_t broadcast = networkBase | ~maskInt;
+
+  uint32_t nextIP = ipInt + 1;
+
+  if (nextIP <= networkBase) {
+    nextIP = networkBase + 1;
+  }
+  if (nextIP >= broadcast) {
+    return IPAddress(0, 0, 0, 0); // no more IPs
+  }
+
+  return IPAddress(
+    (nextIP >> 24) & 0xFF,
+    (nextIP >> 16) & 0xFF,
+    (nextIP >> 8) & 0xFF,
+    nextIP & 0xFF
+  );
+}
+
+uint16_t getNextPort(uint16_t port) {
+  return port + 1;
+}
+
 #endif

pictures/xbm/force_16.xbm

@@ -0,0 +1,6 @@
+#define 3f9b97ac7933453c85ec3a8adb49feeejQ9bt0wTgiC65w8g_width 16
+#define 3f9b97ac7933453c85ec3a8adb49feeejQ9bt0wTgiC65w8g_height 16
+static char 3f9b97ac7933453c85ec3a8adb49feeejQ9bt0wTgiC65w8g_bits[] = {
+  0xFF, 0xFF, 0x1F, 0xF8, 0x0F, 0xF0, 0x07, 0xE0, 0x07, 0xE0, 0x07, 0xE0, 
+  0x67, 0xE6, 0x77, 0xEE, 0x87, 0xE0, 0x8F, 0xF1, 0x0F, 0xF0, 0x4F, 0xF5, 
+  0x1F, 0xF8, 0x3F, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, };

pictures/xbm/joined_16.xbm

@@ -0,0 +1,6 @@
+#define 67ae760eaaa64924c492c46151d37f46mewyG1NBArKDOITT_width 16
+#define 67ae760eaaa64924c492c46151d37f46mewyG1NBArKDOITT_height 16
+static char 67ae760eaaa64924c492c46151d37f46mewyG1NBArKDOITT_bits[] = {
+  0xFF, 0xFF, 0xFF, 0xFF, 0x07, 0xFF, 0xFF, 0xFC, 0xFF, 0xF3, 0x87, 0xF7, 
+  0x7F, 0xEE, 0xFF, 0xED, 0xC7, 0xDD, 0xBF, 0xDB, 0x7F, 0xDB, 0x67, 0xDB, 
+  0x67, 0xDB, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, };

pictures/xbm/pineapple_22.xbm

@@ -0,0 +1,9 @@
+#define be52a82b6ef24281d57d9491aef1484cv5n1Pq988C5WdKha_width 22
+#define be52a82b6ef24281d57d9491aef1484cv5n1Pq988C5WdKha_height 22
+static char be52a82b6ef24281d57d9491aef1484cv5n1Pq988C5WdKha_bits[] = {
+  0xFF, 0xFF, 0x3F, 0xFF, 0xF7, 0x3F, 0x7F, 0x96, 0x3F, 0xFF, 0xED, 0x3F, 
+  0x3F, 0x25, 0x3F, 0xDF, 0xD2, 0x3E, 0xFF, 0xED, 0x3F, 0x7F, 0x8E, 0x3F, 
+  0x3B, 0x77, 0x37, 0xBD, 0x6A, 0x2F, 0xD6, 0xBD, 0x1A, 0xDA, 0xDA, 0x16, 
+  0x5A, 0x6F, 0x16, 0x9A, 0xF7, 0x16, 0xD6, 0x5A, 0x1A, 0xDD, 0xBD, 0x2E, 
+  0xBB, 0x5A, 0x37, 0x3F, 0x6F, 0x3F, 0x7F, 0xB7, 0x3F, 0xFF, 0xCC, 0x3F, 
+  0xFF, 0xF3, 0x3F, 0xFF, 0xFF, 0x3F, };