gitea-mirror/esp8266_deauther
1
0
Fork 0
mirror of https://github.com/SpacehuhnTech/esp8266_deauther.git synced 2025-12-22 15:16:47 -08:00
Code Issues Packages Projects Releases Wiki Activity

Reverting A_config changes

Browse Source 
Sorry I accidentally commited my changes that were for a board I'm testing. Here are the default values again :)
This commit is contained in:
Stefan Kremser
2018-04-03 17:44:26 +02:00
parent 04f12e887c
commit f70c644a9d
1 changed files with 11 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
esp8266_deauther/A_config.h
View File

@@ -15,9 +15,9 @@
Uncomment the type of LED you're using Uncomment the type of LED you're using
Only one of them can be defined at a time! Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
//#define DIGITAL_LED #define DIGITAL_LED
//#define RGB_LED //#define RGB_LED
#define NEOPIXEL_LED //#define NEOPIXEL_LED
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = /* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Adjust following settings for your type of LED Adjust following settings for your type of LED
@@ -39,8 +39,8 @@
#define LED_DYNAMIC_BRIGHTNESS false // brightness in scan mode depending on packet rate and deauths per second #define LED_DYNAMIC_BRIGHTNESS false // brightness in scan mode depending on packet rate and deauths per second
// === Settings for Neopixel LED === // // === Settings for Neopixel LED === //
#define LED_NEOPIXEL_NUM 12 #define LED_NEOPIXEL_NUM 1
#define LED_NEOPIXEL_PIN 14 #define LED_NEOPIXEL_PIN 9
// if it doesn't work try changing NEO_GRB to NEO_GRBW // if it doesn't work try changing NEO_GRB to NEO_GRBW
#define LED_NEOPIXEL Adafruit_NeoPixel(LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800) #define LED_NEOPIXEL Adafruit_NeoPixel(LED_NEOPIXEL_NUM, LED_NEOPIXEL_PIN, NEO_GRB + NEO_KHZ800)
@@ -51,9 +51,9 @@
Adjust the pins to match your setup Adjust the pins to match your setup
Comment out the buttons you don't use. Comment out the buttons you don't use.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
//#define BUTTON_UP 12 #define BUTTON_UP 12
//#define BUTTON_DOWN 13 #define BUTTON_DOWN 13
//#define BUTTON_A 14 #define BUTTON_A 14
//#define BUTTON_LEFT 12 //#define BUTTON_LEFT 12
//#define BUTTON_RIGHT 13 //#define BUTTON_RIGHT 13
@@ -64,8 +64,8 @@
Only one of them can be defined at a time! Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
*/ */
//#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED #define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 13, 12); // for 1.3" OLED //#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 5, 4); // for 1.3" OLED
/* RST = GPIO 5 (D1) /* RST = GPIO 5 (D1)
DC = GPIO 4 (D2) DC = GPIO 4 (D2)
@@ -79,3 +79,4 @@
// ========================================================= // // ========================================================= //
#endif #endif