Update to 0.11.0.1

added logging info for WRITEMAP

WRITEMAP loggin info - better version

.dockerignore

@@ -0,0 +1 @@
+*

.github/FUNDING.yml

@@ -1 +0,0 @@
-custom: https://web.getmonero.org/get-started/contributing/

.github/workflows/build.yml

@@ -1,94 +0,0 @@
-name: continuous-integration/gh-actions/cli
-
-on: [push, pull_request]
-
-jobs:
-  build-macos:
-    runs-on: macOS-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: update brew and install dependencies
-      run: brew update && brew install boost hidapi zmq libpgm miniupnpc ldns expat libunwind-headers protobuf
-    - name: build
-      run: make -j3
-
-  build-windows:
-    runs-on: windows-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - uses: numworks/setup-msys2@v1
-    - name: update pacman
-      run: msys2do pacman -Syu --noconfirm
-    - name: install monero dependencies
-      run: msys2do pacman -S --noconfirm mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-zeromq mingw-w64-x86_64-libsodium mingw-w64-x86_64-hidapi mingw-w64-x86_64-protobuf-c mingw-w64-x86_64-libusb git
-    - name: build
-      run: msys2do make release-static-win64 -j2
-
-  build-ubuntu:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: remove bundled boost
-      run: sudo rm -rf /usr/local/share/boost
-    - name: set apt conf
-      run: |
-        echo "Acquire::Retries \"3\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: sudo apt -y install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev libnorm-dev libusb-1.0-0-dev libpgm-dev libprotobuf-dev protobuf-compiler
-    - name: build
-      run: make -j3
-
-  libwallet-ubuntu:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: remove bundled boost
-      run: sudo rm -rf /usr/local/share/boost
-    - name: set apt conf
-      run: |
-        echo "Acquire::Retries \"3\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: sudo apt -y install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev libnorm-dev libusb-1.0-0-dev libpgm-dev libprotobuf-dev protobuf-compiler
-    - name: build
-      run: cmake -DBUILD_GUI_DEPS=ON && make -j3
-
-  test-ubuntu:
-    needs: build-ubuntu
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: remove bundled boost
-      run: sudo rm -rf /usr/local/share/boost
-    - name: set apt conf
-      run: |
-        echo "Acquire::Retries \"3\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: sudo apt -y install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev libnorm-dev libusb-1.0-0-dev libpgm-dev libprotobuf-dev protobuf-compiler
-    - name: install requests
-      run: pip install requests
-    - name: tests
-      env:
-        CTEST_OUTPUT_ON_FAILURE: ON
-      run: make release-test -j3

.gitignore

@@ -61,7 +61,7 @@ CMakeCache.txt
 CMakeFiles
 cmake_install.cmake
 install_manifest.txt
-cmake-build-debug/
+*.cmake
 
 ### Linux ###
 *~
@@ -96,9 +96,6 @@ local.properties
 # PDT-specific
 .buildpath
 
-# Netbeans-specific
-nbproject
-
 # sbteclipse plugin
 .target
 
@@ -106,6 +103,4 @@ nbproject
 .texlipse
 .idea/
 
-/testnet
-
-__pycache__/
+/testnet

.gitmodules

@@ -1,17 +0,0 @@
-[submodule "external/unbound"]
-	path = external/unbound
-	url = https://github.com/monero-project/unbound
-	branch = monero
-[submodule "external/miniupnp"]
-	path = external/miniupnp
-	url = https://github.com/monero-project/miniupnp
-	branch = monero
-[submodule "external/rapidjson"]
-	path = external/rapidjson
-	url = https://github.com/Tencent/rapidjson
-[submodule "external/trezor-common"]
-	path = external/trezor-common
-	url = https://github.com/trezor/trezor-common.git
-[submodule "external/randomx"]
-	path = external/randomx
-	url = https://github.com/tevador/RandomX

.travis.yml

@@ -1,66 +0,0 @@
-sudo: required
-dist: trusty
-os: linux
-language: minimal
-cache:
-  directories:
-  - contrib/depends/built
-  - contrib/depends/sdk-sources
-  - $HOME/.ccache
-env:
-  global:
-    - MAKEJOBS=-j3
-    - CCACHE_SIZE=100M
-    - CCACHE_TEMPDIR=/tmp/.ccache-temp
-    - CCACHE_COMPRESS=1
-    - CCACHE_DIR=$HOME/.ccache
-    - BASE_OUTDIR=$TRAVIS_BUILD_DIR/out
-    - SDK_URL=https://bitcoincore.org/depends-sources/sdks
-    - DOCKER_PACKAGES="build-essential libtool cmake autotools-dev automake pkg-config bsdmainutils curl git ca-certificates ccache"
-  matrix:
-# RISCV 64bit
-    - HOST=riscv64-linux-gnu PACKAGES="python3 gperf g++-riscv64-linux-gnu"
-# ARM v7
-    - HOST=arm-linux-gnueabihf PACKAGES="python3 gperf g++-arm-linux-gnueabihf"
-# ARM v8
-    - HOST=aarch64-linux-gnu PACKAGES="python3 gperf g++-aarch64-linux-gnu"
-# i686 Win
-    - HOST=i686-w64-mingw32 DEP_OPTS="NO_QT=1" PACKAGES="python3 g++-mingw-w64-i686 qttools5-dev-tools"
-# i686 Linux
-    - HOST=i686-pc-linux-gnu PACKAGES="gperf cmake g++-multilib python3-zmq"
-# Win64
-    - HOST=x86_64-w64-mingw32 DEP_OPTS="NO_QT=1" PACKAGES="cmake python3 g++-mingw-w64-x86-64 qttools5-dev-tools"
-# x86_64 Linux
-    - HOST=x86_64-unknown-linux-gnu PACKAGES="gperf cmake python3-zmq libdbus-1-dev libharfbuzz-dev"
-# Cross-Mac
-    - HOST=x86_64-apple-darwin11 PACKAGES="cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev python3-setuptools-git" OSX_SDK=10.11
-# x86_64 Freebsd
-    - HOST=x86_64-unknown-freebsd PACKAGES="clang-8 gperf cmake python3-zmq libdbus-1-dev libharfbuzz-dev"
-
-before_install:
-    - export PATH=$(echo $PATH | tr ':' "\n" | sed '/\/opt\/python/d' | tr "\n" ":" | sed "s|::|:|g")
-install:
-    - env | grep -E '^(CCACHE_|DISPLAY|CONFIG_SHELL)' | tee /tmp/env
-    - if [[ $HOST = *-mingw32 ]]; then DOCKER_ADMIN="--cap-add SYS_ADMIN"; fi
-    - DOCKER_ID=$(docker run $DOCKER_ADMIN -idt --mount type=bind,src=$TRAVIS_BUILD_DIR,dst=$TRAVIS_BUILD_DIR --mount type=bind,src=$CCACHE_DIR,dst=$CCACHE_DIR -w $TRAVIS_BUILD_DIR --env-file /tmp/env ubuntu:18.04)
-    - DOCKER_EXEC="docker exec $DOCKER_ID"
-    - if [ -n "$DPKG_ADD_ARCH" ]; then $DOCKER_EXEC dpkg --add-architecture "$DPKG_ADD_ARCH" ; fi
-    - travis_retry $DOCKER_EXEC apt-get update
-    - travis_retry $DOCKER_EXEC apt-get install --no-install-recommends --no-upgrade -qq $PACKAGES $DOCKER_PACKAGES
-before_script:
-    - mkdir -p contrib/depends/SDKs contrib/depends/sdk-sources
-    - if [ -n "$OSX_SDK" -a ! -f contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then curl --location --fail $SDK_URL/MacOSX${OSX_SDK}.sdk.tar.gz -o contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
-    - if [ -n "$OSX_SDK" -a -f contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then tar -C contrib/depends/SDKs -xf contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
-    - if [[ $HOST = *-mingw32 ]]; then $DOCKER_EXEC bash -c "update-alternatives --set $HOST-g++ \$(which $HOST-g++-posix)"; fi
-    - if [[ $HOST = *-mingw32 ]]; then $DOCKER_EXEC bash -c "update-alternatives --set $HOST-gcc \$(which $HOST-gcc-posix)"; fi
-    - if [ -z "$NO_DEPENDS" ]; then $DOCKER_EXEC bash -c "make $MAKEJOBS -C contrib/depends HOST=$HOST $DEP_OPTS"; fi
-script:
-    - git submodule init && git submodule update
-    - export TRAVIS_COMMIT_LOG=`git log --format=fuller -1`
-    - OUTDIR=$BASE_OUTDIR/$TRAVIS_PULL_REQUEST/$TRAVIS_JOB_NUMBER-$HOST
-    - if [ -z "$NO_DEPENDS" ]; then $DOCKER_EXEC ccache --max-size=$CCACHE_SIZE; fi
-    - $DOCKER_EXEC bash -c "mkdir build && cd build && cmake -DCMAKE_TOOLCHAIN_FILE=$TRAVIS_BUILD_DIR/contrib/depends/$HOST/share/toolchain.cmake .. && make $MAKEJOBS"
-    - export LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/contrib/depends/$HOST/lib
-after_script:
-    - echo $TRAVIS_COMMIT_RANGE
-    - echo $TRAVIS_COMMIT_LOG

ANONYMITY_NETWORKS.md

@@ -1,236 +0,0 @@
-# Anonymity Networks with Monero
-
-Currently only Tor and I2P have been integrated into Monero. The usage of
-these networks is still considered experimental - there are a few pessimistic
-cases where privacy is leaked. The design is intended to maximize privacy of
-the source of a transaction by broadcasting it over an anonymity network, while
-relying on IPv4 for the remainder of messages to make surrounding node attacks
-(via sybil) more difficult.
-
-
-## Behavior
-
-If _any_ anonymity network is enabled, transactions being broadcast that lack
-a valid "context" (i.e. the transaction did not come from a p2p connection),
-will only be sent to peers on anonymity networks. If an anonymity network is
-enabled but no peers over an anonymity network are available, an error is
-logged and the transaction is kept for future broadcasting over an anonymity
-network. The transaction will not be broadcast unless an anonymity connection
-is made or until `monerod` is shutdown and restarted with only public
-connections enabled.
-
-Anonymity networks can also be used with `monero-wallet-cli` and
-`monero-wallet-rpc` - the wallets will connect to a daemon through a proxy. The
-daemon must provide a hidden service for the RPC itself, which is separate from
-the hidden service for P2P connections.
-
-
-## P2P Commands
-
-Only handshakes, peer timed syncs and transaction broadcast messages are
-supported over anonymity networks. If one `--add-exclusive-node` p2p address
-is specified, then no syncing will take place and only transaction broadcasting
-can occur. It is therefore recommended that `--add-exclusive-node` be combined
-with additional exclusive IPv4 address(es).
-
-
-## Usage
-
-Anonymity networks have no seed nodes (the feature is still considered
-experimental), so a user must specify an address. If configured properly,
-additional peers can be found through typical p2p peerlist sharing.
-
-### Outbound Connections
-
-Connecting to an anonymous address requires the command line option
-`--tx-proxy` which tells `monerod` the ip/port of a socks proxy provided by a
-separate process. On most systems the configuration will look like:
-
-```
---tx-proxy tor,127.0.0.1:9050,10
---tx-proxy i2p,127.0.0.1:9000
-```
-
-which tells `monerod` that ".onion" p2p addresses can be forwarded to a socks
-proxy at IP 127.0.0.1 port 9050 with a max of 10 outgoing connections and
-".b32.i2p" p2p addresses can be forwarded to a socks proxy at IP 127.0.0.1 port
-9000 with the default max outgoing connections. Since there are no seed nodes
-for anonymity connections, peers must be manually specified:
-
-```
---add-exclusive-node rveahdfho7wo4b2m.onion:28083
---add-peer rveahdfho7wo4b2m.onion:28083
-```
-
-Either option can be listed multiple times, and can specify any mix of Tor,
-I2P, and IPv4 addresses. Using `--add-exclusive-node` will prevent the usage of
-seed nodes on ALL networks, which will typically be undesirable.
-
-### Inbound Connections
-
-Receiving anonymity connections is done through the option
-`--anonymous-inbound`. This option tells `monerod` the inbound address, network
-type, and max connections:
-
-```
---anonymous-inbound rveahdfho7wo4b2m.onion:28083,127.0.0.1:28083,25
---anonymous-inbound cmeua5767mz2q5jsaelk2rxhf67agrwuetaso5dzbenyzwlbkg2q.b32.i2p:5000,127.0.0.1:30000
-```
-
-which tells `monerod` that a max of 25 inbound Tor connections are being
-received at address "rveahdfho7wo4b2m.onion:28083" and forwarded to `monerod`
-localhost port 28083, and a default max I2P connections are being received at
-address "cmeua5767mz2q5jsaelk2rxhf67agrwuetaso5dzbenyzwlbkg2q.b32.i2p:5000" and
-forwarded to `monerod` localhost port 30000.
-These addresses will be shared with outgoing peers, over the same network type,
-otherwise the peer will not be notified of the peer address by the proxy.
-
-### Wallet RPC
-
-An anonymity network can be configured to forward incoming connections to a
-`monerod` RPC port - which is independent from the configuration for incoming
-P2P anonymity connections. The anonymity network (Tor/i2p) is
-[configured in the same manner](#configuration), except the localhost port
-must be the RPC port (typically 18081 for mainnet) instead of the p2p port:
-
-```
-HiddenServiceDir /var/lib/tor/data/monero
-HiddenServicePort 18081 127.0.0.1:18081
-```
-
-Then the wallet will be configured to use a Tor/i2p address:
-```
---proxy 127.0.0.1:9050
---daemon-address rveahdfho7wo4b2m.onion
-```
-
-The proxy must match the address type - a Tor proxy will not work properly with
-i2p addresses, etc.
-
-i2p and onion addresses provide the information necessary to authenticate and
-encrypt the connection from end-to-end. If desired, SSL can also be applied to
-the connection with `--daemon-address https://rveahdfho7wo4b2m.onion` which
-requires a server certificate that is signed by a "root" certificate on the
-machine running the wallet. Alternatively, `--daemon-cert-file` can be used to
-specify a certificate to authenticate the server.
-
-Proxies can also be used to connect to "clearnet" (ipv4 addresses or ICANN
-domains), but `--daemon-cert-file` _must_ be used for authentication and
-encryption.
-
-### Network Types
-
-#### Tor & I2P
-
-Options `--add-exclusive-node` and `--add-peer` recognize ".onion" and
-".b32.i2p" addresses, and will properly forward those addresses to the proxy
-provided with `--tx-proxy tor,...` or `--tx-proxy i2p,...`.
-
-Option `--anonymous-inbound` also recognizes ".onion" and ".b32.i2p" addresses,
-and will automatically be sent out to outgoing Tor/I2P connections so the peer
-can distribute the address to its other peers.
-
-##### Configuration
-
-Tor must be configured for hidden services. An example configuration ("torrc")
-might look like:
-
-```
-HiddenServiceDir /var/lib/tor/data/monero
-HiddenServicePort 28083 127.0.0.1:28083
-```
-
-This will store key information in `/var/lib/tor/data/monero` and will forward
-"Tor port" 28083 to port 28083 of ip 127.0.0.1. The file
-`/usr/lib/tor/data/monero/hostname` will contain the ".onion" address for use
-with `--anonymous-inbound`.
-
-I2P must be configured with a standard server tunnel. Configuration differs by
-I2P implementation.
-
-## Privacy Limitations
-
-There are currently some techniques that could be used to _possibly_ identify
-the machine that broadcast a transaction over an anonymity network.
-
-### Timestamps
-
-The peer timed sync command sends the current time in the message. This value
-can be used to link an onion address to an IPv4/IPv6 address. If a peer first
-sees a transaction over Tor, it could _assume_ (possibly incorrectly) that the
-transaction originated from the peer. If both the Tor connection and an
-IPv4/IPv6 connection have timestamps that are approximately close in value they
-could be used to link the two connections. This is less likely to happen if the
-system clock is fairly accurate - many peers on the Monero network should have
-similar timestamps.
-
-#### Mitigation
-
-Keep the system clock accurate so that fingerprinting is more difficult. In
-the future a random offset might be applied to anonymity networks so that if
-the system clock is noticeably off (and therefore more fingerprintable),
-linking the public IPv4/IPv6 connections with the anonymity networks will be
-more difficult.
-
-### Intermittent Monero Syncing
-
-If a user only runs `monerod` to send a transaction then quit, this can also
-be used by an ISP to link a user to a transaction.
-
-#### Mitigation
-
-Run `monerod` as often as possible to conceal when transactions are being sent.
-Future versions will also have peers that first receive a transaction over an
-anonymity network delay the broadcast to public peers by a randomized amount.
-This will not completely mitigate a user who syncs up sends then quits, in
-part because this rule is not enforceable, so this mitigation strategy is
-simply a best effort attempt.
-
-### Active Bandwidth Shaping
-
-An attacker could attempt to bandwidth shape traffic in an attempt to determine
-the source of a Tor/I2P connection. There isn't great mitigation against
-this, but I2P should provide better protection against this attack since
-the connections are not circuit based.
-
-#### Mitigation
-
-The best mitigation is to use I2P instead of Tor. However, I2P
-has a smaller set of users (less cover traffic) and academic reviews, so there
-is a trade off in potential issues. Also, anyone attempting this strategy really
-wants to uncover a user, it seems unlikely that this would be performed against
-every Tor/I2P user.
-
-### I2P/Tor Stream Used Twice
-
-If a single I2P/Tor stream is used 2+ times for transmitting a transaction, the
-operator of the hidden service can conclude that both transactions came from the
-same source. If the subsequent transactions spend a change output from the
-earlier transactions, this will also reveal the "real" spend in the ring
-signature. This issue was (primarily) raised by @secparam on Twitter.
-
-#### Mitigation
-
-`monerod` currently selects two outgoing connections every 5 minutes for
-transmitting transactions over I2P/Tor. Using outgoing connections prevents an
-adversary from making many incoming connections to obtain information (this
-technique was taken from Dandelion). Outgoing connections also do not have a
-persistent public key identity - the creation of a new circuit will generate
-a new public key identity. The lock time on a change address is ~20 minutes, so
-`monerod` will have rotated its selected outgoing connections several times in
-most cases. However, the number of outgoing connections is typically a small
-fixed number, so there is a decent probability of re-use with the same public
-key identity.
-
-@secparam (twitter) recommended changing circuits (Tor) as an additional
-precaution. This is likely not a good idea - forcibly requesting Tor to change
-circuits is observable by the ISP. Instead, `monerod` should likely disconnect
-from peers occasionally. Tor will rotate circuits every ~10 minutes, so
-establishing new connections will use a new public key identity and make it
-more difficult for the hidden service to link information. This process will
-have to be done carefully because closing/reconnecting connections can also
-leak information to hidden services if done improperly.
-
-At the current time, if users need to frequently make transactions, I2P/Tor
-will improve privacy from ISPs and other common adversaries, but still have
-some metadata leakages to unknown hidden service operators.

CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2019, The Monero Project
+# Copyright (c) 2014-2017, The Monero Project
 #
 # All rights reserved.
 #
@@ -27,31 +27,14 @@
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #
 # Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
-
-set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
-
-list(INSERT CMAKE_MODULE_PATH 0
-  "${CMAKE_SOURCE_DIR}/cmake")
-include(CheckCCompilerFlag)
-include(CheckCXXCompilerFlag)
-include(CheckLinkerFlag)
-include(CheckLibraryExists)
-include(CheckFunctionExists)
-include(FindPythonInterp)
-
 if (IOS)
     INCLUDE(CmakeLists_IOS.txt)
 endif()
 
 cmake_minimum_required(VERSION 2.8.7)
-message(STATUS "CMake version ${CMAKE_VERSION}")
 
 project(monero)
 
-include(FindCcache) # Has to be included after the project() macro, to be able to read the CXX variable.
-
-enable_language(C ASM)
-
 function (die msg)
   if (NOT WIN32)
     string(ASCII 27 Esc)
@@ -65,47 +48,6 @@ function (die msg)
   message(FATAL_ERROR "${BoldRed}${msg}${ColourReset}")
 endfunction ()
 
-function (add_c_flag_if_supported flag var)
-  string(REPLACE "-" "_" supported ${flag}_c)
-  check_c_compiler_flag(${flag} ${supported})
-  if(${${supported}})
-    set(${var} "${${var}} ${flag}" PARENT_SCOPE)
-  endif()
-endfunction()
-
-function (add_cxx_flag_if_supported flag var)
-  string(REPLACE "-" "_" supported ${flag}_cxx)
-  check_cxx_compiler_flag(${flag} ${supported})
-  if(${${supported}})
-    set(${var} "${${var}} ${flag}" PARENT_SCOPE)
-  endif()
-endfunction()
-
-function (add_linker_flag_if_supported flag var)
-  string(REPLACE "-" "_" supported ${flag}_ld)
-  string(REPLACE "," "_" supported ${flag}_ld)
-  check_linker_flag(${flag} ${supported})
-  if(${${supported}})
-    set(${var} "${${var}} ${flag}" PARENT_SCOPE)
-  endif()
-endfunction()
-
-function (add_definition_if_function_found function var)
-  string(REPLACE "-" "_" supported ${function}_function)
-  check_function_exists(${function} ${supported})
-  if(${${supported}})
-    add_definitions("-D${var}")
-  endif()
-endfunction()
-
-function (add_definition_if_library_exists library function header var)
-  string(REPLACE "-" "_" supported ${function}_library)
-  check_library_exists(${library} ${function} ${header} ${supported})
-  if(${${supported}})
-    add_definitions("-D${var}")
-  endif()
-endfunction()
-
 if(NOT CMAKE_BUILD_TYPE)
   set(CMAKE_BUILD_TYPE Release CACHE STRING "Build type" FORCE)
   message(STATUS "Setting default build type: ${CMAKE_BUILD_TYPE}")
@@ -120,16 +62,11 @@ string(TOLOWER ${CMAKE_BUILD_TYPE} CMAKE_BUILD_TYPE_LOWER)
 # when ARCH is not set to an explicit identifier, cmake's builtin is used
 # to identify the target architecture, to direct logic in this cmake script.
 # Since ARCH is a cached variable, it will not be set on first cmake invocation.
-if (NOT ARCH_ID)
 if (NOT ARCH OR ARCH STREQUAL "" OR ARCH STREQUAL "native" OR ARCH STREQUAL "default")
-  if(CMAKE_SYSTEM_PROCESSOR STREQUAL "")
-    set(CMAKE_SYSTEM_PROCESSOR ${CMAKE_HOST_SYSTEM_PROCESSOR})
-  endif()
   set(ARCH_ID "${CMAKE_SYSTEM_PROCESSOR}")
 else()
   set(ARCH_ID "${ARCH}")
 endif()
-endif()
 string(TOLOWER "${ARCH_ID}" ARM_ID)
 string(SUBSTRING "${ARM_ID}" 0 3 ARM_TEST)
 if (ARM_TEST STREQUAL "arm")
@@ -151,27 +88,9 @@ endif()
 
 if(ARCH_ID STREQUAL "ppc64le")
   set(PPC64LE 1)
-  set(PPC64   0)
-  set(PPC     0)
 endif()
 
-if(ARCH_ID STREQUAL "powerpc64" OR ARCH_ID STREQUAL "ppc64")
-  set(PPC64LE 0)
-  set(PPC64   1)
-  set(PPC     0)
-endif()
-
-if(ARCH_ID STREQUAL "powerpc" OR ARCH_ID STREQUAL "ppc")
-  set(PPC64LE 0)
-  set(PPC64   0)
-  set(PPC     1)
-endif()
-
-if(ARCH_ID STREQUAL "s390x")
-  set(S390X 1)
-endif()
-
-if(WIN32 OR ARM OR PPC64LE OR PPC64 OR PPC)
+if(WIN32 OR ARM)
   set(OPT_FLAGS_RELEASE "-O2")
 else()
   set(OPT_FLAGS_RELEASE "-Ofast")
@@ -185,29 +104,6 @@ else()
   message(STATUS "Building without build tag")
 endif()
 
-if(NOT MANUAL_SUBMODULES)
-  find_package(Git)
-  if(GIT_FOUND)
-    function (check_submodule relative_path)
-      execute_process(COMMAND git rev-parse "HEAD" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${relative_path} OUTPUT_VARIABLE localHead)
-      execute_process(COMMAND git rev-parse "HEAD:${relative_path}" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} OUTPUT_VARIABLE checkedHead)
-      string(COMPARE EQUAL "${localHead}" "${checkedHead}" upToDate)
-      if (upToDate)
-        message(STATUS "Submodule '${relative_path}' is up-to-date")
-      else()
-        message(FATAL_ERROR "Submodule '${relative_path}' is not up-to-date. Please update all submodules with\ngit submodule update --init --force\nor run cmake with -DMANUAL_SUBMODULES=1\n")
-      endif()
-    endfunction ()
-    
-    message(STATUS "Checking submodules")
-    check_submodule(external/miniupnp)
-    check_submodule(external/unbound)
-    check_submodule(external/rapidjson)
-    check_submodule(external/trezor-common)
-    check_submodule(external/randomx)
-  endif()
-endif()
-
 set(CMAKE_C_FLAGS_RELEASE "-DNDEBUG ${OPT_FLAGS_RELEASE}")
 set(CMAKE_CXX_FLAGS_RELEASE "-DNDEBUG ${OPT_FLAGS_RELEASE}")
 
@@ -216,9 +112,6 @@ set(PER_BLOCK_CHECKPOINT 1)
 
 if(PER_BLOCK_CHECKPOINT)
   add_definitions("-DPER_BLOCK_CHECKPOINT")
-  set(Blocks "blocks")
-else()
-  set(Blocks "")
 endif()
 
 list(INSERT CMAKE_MODULE_PATH 0
@@ -254,13 +147,6 @@ set_property(GLOBAL PROPERTY USE_FOLDERS ON)
 enable_testing()
 
 option(BUILD_DOCUMENTATION "Build the Doxygen documentation." ON)
-option(BUILD_TESTS "Build tests." OFF)
-if (CMAKE_BUILD_TYPE STREQUAL "Debug")
-  set(DEFAULT_BUILD_DEBUG_UTILITIES ON)
-else()
-  set(DEFAULT_BUILD_DEBUG_UTILITIES OFF)
-endif()
-option(BUILD_DEBUG_UTILITIES "Build debug utilities." DEFAULT_BUILD_DEBUG_UTILITIES)
 
 # Check whether we're on a 32-bit or 64-bit system
 if(CMAKE_SIZEOF_VOID_P EQUAL "8")
@@ -300,7 +186,7 @@ endif()
 # elseif(CMAKE_SYSTEM_NAME MATCHES ".*BSDI.*")
 #   set(BSDI TRUE)
 
-include_directories(external/rapidjson/include external/easylogging++ src contrib/epee/include external)
+include_directories(external/easylogging++ src contrib/epee/include external "${CMAKE_BINARY_DIR}/version")
 
 if(APPLE)
   include_directories(SYSTEM /usr/include/malloc)
@@ -323,11 +209,11 @@ endif()
 
 if (BUILD_SHARED_LIBS)
   message(STATUS "Building internal libraries with position independent code")
+  set(PIC_FLAG "-fPIC")
   add_definitions("-DBUILD_SHARED_LIBS")
 else()
   message(STATUS "Building internal libraries as static")
 endif()
-set(PIC_FLAG "-fPIC")
 
 if(MINGW)
   string(REGEX MATCH "^[^/]:/[^/]*" msys2_install_path "${CMAKE_C_COMPILER}")
@@ -348,40 +234,69 @@ if(STATIC)
   else()
     set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
   endif()
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DZMQ_STATIC")
-endif()
-
-if(SANITIZE)
-  if (MSVC)
-    message(FATAL_ERROR "Cannot sanitize with MSVC")
-  else()
-    message(STATUS "Using ASAN")
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=address")
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=address")
-  endif()
 endif()
 
 # Set default blockchain storage location:
-# memory was the default in Cryptonote before Monero implemented LMDB, it still works but is unnecessary.
+# memory was the default in Cryptonote before Monero implimented LMDB, it still works but is unneccessary.
 # set(DATABASE memory)
 set(DATABASE lmdb)
-message(STATUS "Using LMDB as default DB type")
-set(BLOCKCHAIN_DB DB_LMDB)
-add_definitions("-DDEFAULT_DB_TYPE=\"lmdb\"")
+
+if (DEFINED ENV{DATABASE})
+  set(DATABASE $ENV{DATABASE})
+  message(STATUS "DATABASE set: ${DATABASE}")
+else()
+  message(STATUS "Could not find DATABASE in env (not required unless you want to change database type from default: ${DATABASE})")
+endif()
+
+set(BERKELEY_DB_OVERRIDE 0)
+if (DEFINED ENV{BERKELEY_DB})
+  set(BERKELEY_DB_OVERRIDE 1)
+  set(BERKELEY_DB $ENV{BERKELEY_DB})
+elseif()
+  set(BERKELEY_DB 0)
+endif()
+
+if (DATABASE STREQUAL "lmdb")
+  message(STATUS "Using LMDB as default DB type")
+  set(BLOCKCHAIN_DB DB_LMDB)
+  add_definitions("-DDEFAULT_DB_TYPE=\"lmdb\"")
+elseif (DATABASE STREQUAL "berkeleydb")
+  find_package(BerkeleyDB)
+  if(NOT BERKELEY_DB)
+      die("Found BerkeleyDB includes, but could not find BerkeleyDB library. Please make sure you have installed libdb and libdb-dev / libdb++-dev or the equivalent.")
+  else()
+    message(STATUS "Found BerkeleyDB include (db.h) in ${BERKELEY_DB_INCLUDE_DIR}")
+    if(BERKELEY_DB_LIBRARIES)
+      message(STATUS "Found BerkeleyDB shared library")
+      set(BDB_STATIC false CACHE BOOL "BDB Static flag")
+      set(BDB_INCLUDE ${BERKELEY_DB_INCLUDE_DIR} CACHE STRING "BDB include path")
+      set(BDB_LIBRARY ${BERKELEY_DB_LIBRARIES} CACHE STRING "BDB library name")
+      set(BDB_LIBRARY_DIRS "" CACHE STRING "BDB Library dirs")
+      set(BERKELEY_DB 1)
+    else()
+      die("Found BerkeleyDB includes, but could not find BerkeleyDB library. Please make sure you have installed libdb and libdb-dev / libdb++-dev or the equivalent.")
+    endif()
+  endif()
+
+  message(STATUS "Using Berkeley DB as default DB type")
+  add_definitions("-DDEFAULT_DB_TYPE=\"berkeley\"")
+else()
+  die("Invalid database type: ${DATABASE}")
+endif()
+
+if(BERKELEY_DB)
+  add_definitions("-DBERKELEY_DB")
+endif()
+
 add_definitions("-DBLOCKCHAIN_DB=${BLOCKCHAIN_DB}")
 
 # Can't install hook in static build on OSX, because OSX linker does not support --wrap
 # On ARM, having libunwind package (with .so's only) installed breaks static link.
-# When possible, avoid stack tracing using libunwind in favor of using easylogging++.
 if (APPLE)
   set(DEFAULT_STACK_TRACE OFF)
   set(LIBUNWIND_LIBRARIES "")
-elseif (DEPENDS AND NOT LINUX)
-  set(DEFAULT_STACK_TRACE OFF)
-  set(LIBUNWIND_LIBRARIES "")
 elseif(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT MINGW)
   set(DEFAULT_STACK_TRACE ON)
-  set(STACK_TRACE_LIB "easylogging++") # for diag output only
   set(LIBUNWIND_LIBRARIES "")
 elseif (ARM AND STATIC)
   set(DEFAULT_STACK_TRACE OFF)
@@ -390,7 +305,6 @@ else()
   find_package(Libunwind)
   if(LIBUNWIND_FOUND)
     set(DEFAULT_STACK_TRACE ON)
-    set(STACK_TRACE_LIB "libunwind") # for diag output only
   else()
     set(DEFAULT_STACK_TRACE OFF)
     set(LIBUNWIND_LIBRARIES "")
@@ -400,26 +314,13 @@ endif()
 option(STACK_TRACE "Install a hook that dumps stack on exception" ${DEFAULT_STACK_TRACE})
 
 if(STACK_TRACE)
-  message(STATUS "Stack trace on exception enabled (using ${STACK_TRACE_LIB})")
+  message(STATUS "Stack trace on exception enabled")
 else()
   message(STATUS "Stack trace on exception disabled")
 endif()
 
-if (UNIX AND NOT APPLE)
-  # Note that at the time of this writing the -Wstrict-prototypes flag added below will make this fail
-  set(THREADS_PREFER_PTHREAD_FLAG ON)
-  find_package(Threads)
-  add_c_flag_if_supported(-pthread CMAKE_C_FLAGS)
-  add_cxx_flag_if_supported(-pthread CMAKE_CXX_FLAGS)
-endif()
-
-# Handle OpenSSL, used for sha256sum on binary updates and light wallet ssl http
-if (CMAKE_SYSTEM_NAME MATCHES "(SunOS|Solaris)")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -pthreads")
-endif ()
-
+# Handle OpenSSL, used for sha256sum on binary updates
 if (APPLE AND NOT IOS)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -march=x86-64 -fvisibility=default -std=c++11")
   if (NOT OpenSSL_DIR)
       EXECUTE_PROCESS(COMMAND brew --prefix openssl
         OUTPUT_VARIABLE OPENSSL_ROOT_DIR
@@ -429,35 +330,30 @@ if (APPLE AND NOT IOS)
 endif()
 
 find_package(OpenSSL REQUIRED)
-message(STATUS "Using OpenSSL include dir at ${OPENSSL_INCLUDE_DIR}")
-include_directories(${OPENSSL_INCLUDE_DIR})
 if(STATIC AND NOT IOS)
   if(UNIX)
-    set(OPENSSL_LIBRARIES "${OPENSSL_LIBRARIES};${CMAKE_DL_LIBS};${CMAKE_THREAD_LIBS_INIT}")
+    set(OPENSSL_LIBRARIES "${OPENSSL_LIBRARIES};${CMAKE_DL_LIBS}")
   endif()
 endif()
 
-find_package(HIDAPI)
-
-add_definition_if_library_exists(c memset_s "string.h" HAVE_MEMSET_S)
-add_definition_if_library_exists(c explicit_bzero "strings.h" HAVE_EXPLICIT_BZERO)
-add_definition_if_function_found(strptime HAVE_STRPTIME)
+if (UNIX AND NOT APPLE)
+  # Note that at the time of this writing the -Wstrict-prototypes flag added below will make this fail
+  set(THREADS_PREFER_PTHREAD_FLAG ON)
+  find_package(Threads)
+endif()
 
 add_definitions(-DAUTO_INITIALIZE_EASYLOGGINGPP)
 
-# Generate header for embedded translations
-# Generate header for embedded translations, use target toolchain if depends, otherwise use the
-# lrelease and lupdate binaries from the host
-include(ExternalProject)
-ExternalProject_Add(generate_translations_header
-  SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/translations"
-  BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}/translations"
-  STAMP_DIR ${LRELEASE_PATH}
-  CMAKE_ARGS -DLRELEASE_PATH=${LRELEASE_PATH}
-  INSTALL_COMMAND cmake -E echo "")
-include_directories("${CMAKE_CURRENT_BINARY_DIR}/translations")
 add_subdirectory(external)
 
+# Final setup for miniupnpc
+if(UPNP_STATIC OR IOS)
+  add_definitions("-DUPNP_STATIC")
+else()
+  add_definitions("-DUPNP_DYNAMIC")
+  include_directories(${UPNP_INCLUDE})
+endif()
+
 # Final setup for libunbound
 include_directories(${UNBOUND_INCLUDE})
 link_directories(${UNBOUND_LIBRARY_DIRS})
@@ -469,23 +365,15 @@ link_directories(${EASYLOGGING_LIBRARY_DIRS})
 # Final setup for liblmdb
 include_directories(${LMDB_INCLUDE})
 
+# Final setup for Berkeley DB
+if (BERKELEY_DB)
+  include_directories(${BDB_INCLUDE})
+endif()
+
 # Final setup for libunwind
 include_directories(${LIBUNWIND_INCLUDE})
 link_directories(${LIBUNWIND_LIBRARY_DIRS})
 
-# Final setup for hid
-if (HIDAPI_FOUND) 
-  message(STATUS "Using HIDAPI include dir at ${HIDAPI_INCLUDE_DIR}")
-  add_definitions(-DHAVE_HIDAPI)
-  include_directories(${HIDAPI_INCLUDE_DIR})
-  link_directories(${LIBHIDAPI_LIBRARY_DIRS})
-else (HIDAPI_FOUND)
-  message(STATUS "Could not find HIDAPI")
-endif()
-
-# Trezor support check
-include(CheckTrezor)
-
 if(MSVC)
   add_definitions("/bigobj /MP /W3 /GS- /D_CRT_SECURE_NO_WARNINGS /wd4996 /wd4345 /D_WIN32_WINNT=0x0600 /DWIN32_LEAN_AND_MEAN /DGTEST_HAS_TR1_TUPLE=0 /FIinline_c.h /D__SSE4_1__")
   # set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /Dinline=__inline")
@@ -498,76 +386,28 @@ if(MSVC)
   include_directories(SYSTEM src/platform/msc)
 else()
   include(TestCXXAcceptsFlag)
-  if (NOT ARCH)
-    set(ARCH native CACHE STRING "CPU to build for: -march value or 'default' to not pass -march at all")
-  endif()
+  set(ARCH native CACHE STRING "CPU to build for: -march value or 'default' to not pass -march at all")
   message(STATUS "Building on ${CMAKE_SYSTEM_PROCESSOR} for ${ARCH}")
   if(ARCH STREQUAL "default")
     set(ARCH_FLAG "")
   elseif(PPC64LE)
-    set(ARCH_FLAG "-mcpu=power8")
-  elseif(PPC64)
-    set(ARCH_FLAG "-mcpu=970")
-  elseif(PPC)
-    set(ARCH_FLAG "-mcpu=7400")
+    set(ARCH_FLAG "-mcpu=${ARCH}")
   elseif(IOS AND ARCH STREQUAL "arm64")
     message(STATUS "IOS: Changing arch from arm64 to armv8")
     set(ARCH_FLAG "-march=armv8")
   else()
     set(ARCH_FLAG "-march=${ARCH}")
-    if(ARCH STREQUAL "native")
-      check_c_compiler_flag(-march=native CC_SUPPORTS_MARCH_NATIVE)
-      if (NOT CC_SUPPORTS_MARCH_NATIVE)
-        check_c_compiler_flag(-mtune=native CC_SUPPORTS_MTUNE_NATIVE)
-        if (CC_SUPPORTS_MTUNE_NATIVE)
-          set(ARCH_FLAG "-mtune=${ARCH}")
-        else()
-          set(ARCH_FLAG "")
-        endif()
-      endif()
-    endif()
   endif()
-
-  option(NO_AES "Explicitly disable AES support" ${NO_AES})
-
-  if(NO_AES)
-    message(STATUS "AES support explicitly disabled")
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DNO_AES")
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DNO_AES")
-  elseif(NOT ARM AND NOT PPC64LE AND NOT PPC64 AND NOT PPC AND NOT S390X)
-    message(STATUS "AES support enabled")
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -maes")
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -maes")
-  elseif(PPC64LE OR PPC64 OR PPC)
-    message(STATUS "AES support not available on POWER")
-  elseif(S390X)
-    message(STATUS "AES support not available on s390x")
-  elseif(ARM6)
-    message(STATUS "AES support not available on ARMv6")
-  elseif(ARM7)
-    message(STATUS "AES support not available on ARMv7")
-  elseif(ARM8)
-    CHECK_CXX_ACCEPTS_FLAG("-march=${ARCH}+crypto" ARCH_PLUS_CRYPTO)
-    if(ARCH_PLUS_CRYPTO)
-      message(STATUS "Crypto extensions enabled for ARMv8")
-      set(ARCH_FLAG "-march=${ARCH}+crypto")
-    else()
-      message(STATUS "Crypto extensions unavailable on your ARMv8 device")
-    endif()
-  else()
-    message(STATUS "AES support disabled")
-  endif()
-
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${ARCH_FLAG}")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${ARCH_FLAG}")
-
   set(WARNINGS "-Wall -Wextra -Wpointer-arith -Wundef -Wvla -Wwrite-strings -Wno-error=extra -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-unused-variable -Wno-error=unused-variable -Wno-error=undef -Wno-error=uninitialized")
+  if(NOT MINGW)
+    set(WARNINGS_AS_ERRORS_FLAG "-Werror")
+  endif()
   if(CMAKE_C_COMPILER_ID STREQUAL "Clang")
     if(ARM)
       set(WARNINGS "${WARNINGS} -Wno-error=inline-asm")
     endif()
   else()
-    set(WARNINGS "${WARNINGS} -Wlogical-op -Wno-error=maybe-uninitialized -Wno-error=cpp")
+    set(WARNINGS "${WARNINGS} -Wlogical-op -Wno-error=maybe-uninitialized")
   endif()
   if(MINGW)
     set(WARNINGS "${WARNINGS} -Wno-error=unused-value -Wno-error=unused-but-set-variable")
@@ -609,78 +449,32 @@ else()
   set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fno-strict-aliasing")
   set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-strict-aliasing")
 
-  # if those don't work for your compiler, single it out where appropriate
-  if(CMAKE_BUILD_TYPE STREQUAL "Release" AND NOT OPENBSD)
-    set(C_SECURITY_FLAGS "${C_SECURITY_FLAGS} -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1")
-    set(CXX_SECURITY_FLAGS "${CXX_SECURITY_FLAGS} -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1")
+  option(NO_AES "Explicitly disable AES support" ${NO_AES})
+
+  if(NOT NO_AES AND NOT ARM AND NOT PPC64LE)
+    message(STATUS "AES support enabled")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -maes")
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -maes")
+  elseif(PPC64LE)
+    message(STATUS "AES support not available on ppc64le")
+  elseif(ARM6)
+    message(STATUS "AES support not available on ARMv6")
+  elseif(ARM7)
+    message(STATUS "AES support not available on ARMv7")
+  elseif(ARM8)
+    CHECK_CXX_ACCEPTS_FLAG("-march=${ARCH}+crypto" ARCH_PLUS_CRYPTO)
+    if(ARCH_PLUS_CRYPTO)
+      message(STATUS "Crypto extensions enabled for ARMv8")
+      set(ARCH_FLAG "-march=${ARCH}+crypto")
+    else()
+      message(STATUS "Crypto extensions unavailable on your ARMv8 device")
+    endif()
+  else()
+    message(STATUS "AES support disabled")
   endif()
 
-  # warnings
-  add_c_flag_if_supported(-Wformat C_SECURITY_FLAGS)
-  add_cxx_flag_if_supported(-Wformat CXX_SECURITY_FLAGS)
-  add_c_flag_if_supported(-Wformat-security C_SECURITY_FLAGS)
-  add_cxx_flag_if_supported(-Wformat-security CXX_SECURITY_FLAGS)
-
-  # -fstack-protector
-  if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
-    add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS)
-    add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS)
-  endif()
-
-  # New in GCC 8.2
-  if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
-    add_c_flag_if_supported(-fcf-protection=full C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fcf-protection=full CXX_SECURITY_FLAGS)
-  endif()
-  if (NOT WIN32 AND NOT OPENBSD)
-    add_c_flag_if_supported(-fstack-clash-protection C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fstack-clash-protection CXX_SECURITY_FLAGS)
-  endif()
-
-  # Removed in GCC 9.1 (or before ?), but still accepted, so spams the output
-  if (NOT (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))
-    add_c_flag_if_supported(-mmitigate-rop C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-mmitigate-rop CXX_SECURITY_FLAGS)
-  endif()
-
-  # linker
-  if (NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
-    # Windows binaries die on startup with PIE when compiled with GCC <9.x
-    add_linker_flag_if_supported(-pie LD_SECURITY_FLAGS)
-  endif()
-  add_linker_flag_if_supported(-Wl,-z,relro LD_SECURITY_FLAGS)
-  add_linker_flag_if_supported(-Wl,-z,now LD_SECURITY_FLAGS)
-  add_linker_flag_if_supported(-Wl,-z,noexecstack noexecstack_SUPPORTED)
-  if (noexecstack_SUPPORTED)
-    set(LD_SECURITY_FLAGS "${LD_SECURITY_FLAGS} -Wl,-z,noexecstack")
-  endif()
-  add_linker_flag_if_supported(-Wl,-z,noexecheap noexecheap_SUPPORTED)
-  if (noexecheap_SUPPORTED)
-    set(LD_SECURITY_FLAGS "${LD_SECURITY_FLAGS} -Wl,-z,noexecheap")
-  endif()
-
-  if(BACKCOMPAT)
-      add_linker_flag_if_supported(-Wl,--wrap=__divmoddi4 LD_BACKCOMPAT_FLAGS)
-      add_linker_flag_if_supported(-Wl,--wrap=glob LD_BACKCOMPAT_FLAGS)
-      message(STATUS "Using Lib C back compat flags: ${LD_BACKCOMPAT_FLAGS}")
-  endif()
-
-  # some windows linker bits
-  if (WIN32)
-    add_linker_flag_if_supported(-Wl,--dynamicbase LD_SECURITY_FLAGS)
-    add_linker_flag_if_supported(-Wl,--nxcompat LD_SECURITY_FLAGS)
-    add_linker_flag_if_supported(-Wl,--high-entropy-va LD_SECURITY_FLAGS)
-  endif()
-
-  message(STATUS "Using C security hardening flags: ${C_SECURITY_FLAGS}")
-  message(STATUS "Using C++ security hardening flags: ${CXX_SECURITY_FLAGS}")
-  message(STATUS "Using linker security hardening flags: ${LD_SECURITY_FLAGS}")
-
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=c11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_FLAG} ${WARNINGS} ${C_WARNINGS} ${COVERAGE_FLAGS} ${PIC_FLAG} ${C_SECURITY_FLAGS}")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_CPP_FLAG} ${WARNINGS} ${CXX_WARNINGS} ${COVERAGE_FLAGS} ${PIC_FLAG} ${CXX_SECURITY_FLAGS}")
-  set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${LD_SECURITY_FLAGS} ${LD_BACKCOMPAT_FLAGS}")
+  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=c11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_FLAG} ${WARNINGS} ${C_WARNINGS} ${ARCH_FLAG} ${COVERAGE_FLAGS} ${PIC_FLAG}")
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_CPP_FLAG} ${WARNINGS} ${CXX_WARNINGS} ${ARCH_FLAG} ${COVERAGE_FLAGS} ${PIC_FLAG}")
 
   # With GCC 6.1.1 the compiled binary malfunctions due to aliasing. Until that
   # is fixed in the code (Issue #847), force compiler to be conservative.
@@ -720,10 +514,6 @@ else()
       message(STATUS "Selecting VFP for ARMv6")
       set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfpu=vfp")
       set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfpu=vfp")
-      if(DEPENDS)
-        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -marm")
-        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -marm")
-      endif()
     endif(ARM6)
 
     if(ARM7)
@@ -771,14 +561,13 @@ else()
   if(ANDROID AND NOT BUILD_GUI_DEPS STREQUAL "ON" OR IOS)
     #From Android 5: "only position independent executables (PIE) are supported" 
     message(STATUS "Enabling PIE executable")
-    set(PIC_FLAG "")
     set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fPIE")
     set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fPIE")
     set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_CXX_FLAGS} -fPIE -pie")
   endif()
 
   if(APPLE)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fvisibility=default -DGTEST_HAS_TR1_TUPLE=0")
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DGTEST_HAS_TR1_TUPLE=0")
   endif()
 
   set(DEBUG_FLAGS "-g3")
@@ -788,9 +577,6 @@ else()
     set(DEBUG_FLAGS "${DEBUG_FLAGS} -O0 ")
   endif()
 
-  # At least some CLANGs default to not enough for monero
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ftemplate-depth=900")
-
   if(NOT DEFINED USE_LTO_DEFAULT)
     set(USE_LTO_DEFAULT false)
   endif()
@@ -846,7 +632,6 @@ if (${BOOST_IGNORE_SYSTEM_PATHS} STREQUAL "ON")
 endif()
 
 set(OLD_LIB_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-set(Boost_NO_BOOST_CMAKE ON)
 if(STATIC)
   if(MINGW)
     set(CMAKE_FIND_LIBRARY_SUFFIXES .a)
@@ -855,35 +640,18 @@ if(STATIC)
   set(Boost_USE_STATIC_LIBS ON)
   set(Boost_USE_STATIC_RUNTIME ON)
 endif()
-find_package(Boost 1.58 QUIET REQUIRED COMPONENTS system filesystem thread date_time chrono regex serialization program_options locale)
+find_package(Boost 1.58 QUIET REQUIRED COMPONENTS system filesystem thread date_time chrono regex serialization program_options)
 
 set(CMAKE_FIND_LIBRARY_SUFFIXES ${OLD_LIB_SUFFIXES})
 if(NOT Boost_FOUND)
-  die("Could not find Boost libraries, please make sure you have installed Boost or libboost-all-dev (>=1.58) or the equivalent")
+  die("Could not find Boost libraries, please make sure you have installed Boost or libboost-all-dev (1.58) or the equivalent")
 elseif(Boost_FOUND)
   message(STATUS "Found Boost Version: ${Boost_VERSION}")
-  if (Boost_VERSION VERSION_LESS 10 AND Boost_VERSION VERSION_LESS 1.62.0 AND NOT (OPENSSL_VERSION VERSION_LESS 1.1))
-    set(BOOST_BEFORE_1_62 true)
-  endif()
-  if (NOT Boost_VERSION VERSION_LESS 10 AND Boost_VERSION VERSION_LESS 106200 AND NOT (OPENSSL_VERSION VERSION_LESS 1.1))
-    set(BOOST_BEFORE_1_62 true)
-  endif()
-  if (BOOST_BEFORE_1_62)
-      message(FATAL_ERROR "Boost ${Boost_VERSION} (older than 1.62) is too old to link with OpenSSL ${OPENSSL_VERSION} (1.1 or newer) found at ${OPENSSL_INCLUDE_DIR} and ${OPENSSL_LIBRARIES}. "
-                          "Update Boost or install OpenSSL 1.0 and set path to it when running cmake: "
-                          "cmake -DOPENSSL_ROOT_DIR='/usr/include/openssl-1.0'")
-  endif()
 endif()
 
 include_directories(SYSTEM ${Boost_INCLUDE_DIRS})
 if(MINGW)
-  set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -Wa,-mbig-obj")
-  set(EXTRA_LIBRARIES mswsock;ws2_32;iphlpapi;crypt32;bcrypt)
-  if(DEPENDS)
-    set(ICU_LIBRARIES icuio icui18n icuuc icudata icutu iconv)
-  else()
-    set(ICU_LIBRARIES icuio icuin icuuc icudt icutu iconv)
-  endif()
+  set(EXTRA_LIBRARIES mswsock;ws2_32;iphlpapi)
 elseif(APPLE OR OPENBSD OR ANDROID)
   set(EXTRA_LIBRARIES "")
 elseif(FREEBSD)
@@ -891,105 +659,55 @@ elseif(FREEBSD)
 elseif(DRAGONFLY)
   find_library(COMPAT compat)
   set(EXTRA_LIBRARIES execinfo ${COMPAT})
-elseif(CMAKE_SYSTEM_NAME MATCHES "(SunOS|Solaris)")
-  set(EXTRA_LIBRARIES socket nsl resolv)
-elseif(NOT MSVC AND NOT DEPENDS)
+elseif(NOT MSVC)
   find_library(RT rt)
   set(EXTRA_LIBRARIES ${RT})
 endif()
 
 list(APPEND EXTRA_LIBRARIES ${CMAKE_DL_LIBS})
 
-if (HIDAPI_FOUND OR LibUSB_COMPILE_TEST_PASSED)
-  if (APPLE)
-    if(DEPENDS)
-      list(APPEND EXTRA_LIBRARIES "-framework Foundation -framework IOKit")
-    else()
-      find_library(COREFOUNDATION CoreFoundation)
-      find_library(IOKIT IOKit)
-      list(APPEND EXTRA_LIBRARIES ${IOKIT})
-      list(APPEND EXTRA_LIBRARIES ${COREFOUNDATION})
-    endif()
-  endif()
-  if (WIN32)
-    list(APPEND EXTRA_LIBRARIES setupapi)
-  endif()
-endif()
-
 option(USE_READLINE "Build with GNU readline support." ON)
-if(USE_READLINE AND NOT DEPENDS)
+if(USE_READLINE)
   find_package(Readline)
   if(READLINE_FOUND AND GNU_READLINE_FOUND)
     add_definitions(-DHAVE_READLINE)
     include_directories(${Readline_INCLUDE_DIR})
+    list(APPEND EXTRA_LIBRARIES ${Readline_LIBRARY})
     message(STATUS "Found readline library at: ${Readline_ROOT_DIR}")
-    set(EPEE_READLINE epee_readline)
   else()
     message(STATUS "Could not find GNU readline library so building without readline support")
   endif()
-elseif(USE_READLINE AND DEPENDS AND NOT MINGW)
-  find_path(Readline_INCLUDE_PATH readline/readline.h)
-  find_library(Readline_LIBRARY readline)
-  find_library(Terminfo_LIBRARY tinfo)
-  set(Readline_LIBRARY "${Readline_LIBRARY};${Terminfo_LIBRARY}")
-  set(GNU_READLINE_LIBRARY ${Readline_LIBRARY})
-  add_definitions(-DHAVE_READLINE)
-  set(EPEE_READLINE epee_readline)
 endif()
 
 if(ANDROID)
   set(ATOMIC libatomic.a)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-error=user-defined-warnings")
 endif()
-if(CMAKE_C_COMPILER_ID STREQUAL "Clang" AND ARCH_WIDTH EQUAL "32" AND NOT IOS AND NOT FREEBSD)
+if(CMAKE_C_COMPILER_ID STREQUAL "Clang" AND ARCH_WIDTH EQUAL "32" AND NOT IOS)
   find_library(ATOMIC atomic)
-  if (ATOMIC_FOUND)
-    list(APPEND EXTRA_LIBRARIES ${ATOMIC})
-  endif()
+  list(APPEND EXTRA_LIBRARIES ${ATOMIC})
 endif()
 
-find_path(ZMQ_INCLUDE_PATH zmq.h)
-find_library(ZMQ_LIB zmq)
-find_library(PGM_LIBRARY pgm)
-find_library(NORM_LIBRARY norm)
-find_library(PROTOLIB_LIBRARY protolib)
-find_library(SODIUM_LIBRARY sodium)
+include(version.cmake)
 
-if(NOT ZMQ_INCLUDE_PATH)
-  message(FATAL_ERROR "Could not find required header zmq.h")
-endif()
-if(NOT ZMQ_LIB)
-  message(FATAL_ERROR "Could not find required libzmq")
-endif()
-if(PGM_LIBRARY)
-  set(ZMQ_LIB "${ZMQ_LIB};${PGM_LIBRARY}")
-endif()
-if(NORM_LIBRARY)
-  set(ZMQ_LIB "${ZMQ_LIB};${NORM_LIBRARY}")
-endif()
-if(PROTOLIB_LIBRARY)
-  set(ZMQ_LIB "${ZMQ_LIB};${PROTOLIB_LIBRARY}")
-endif()
-if(SODIUM_LIBRARY)
-  set(ZMQ_LIB "${ZMQ_LIB};${SODIUM_LIBRARY}")
-endif()
+function (treat_warnings_as_errors dirs)
+  foreach(dir ${ARGV})
+    set_property(DIRECTORY ${dir}
+      APPEND PROPERTY COMPILE_FLAGS "-Werror")
+  endforeach()
+endfunction()
 
 add_subdirectory(contrib)
 add_subdirectory(src)
 
-find_package(PythonInterp)
+treat_warnings_as_errors(contrib src)
+
+option(BUILD_TESTS "Build tests." OFF)
+
 if(BUILD_TESTS)
-  message(STATUS "Building tests")
   add_subdirectory(tests)
-else()
-  message(STATUS "Not building tests")
 endif()
 
-if(BUILD_DEBUG_UTILITIES)
-  message(STATUS "Building debug utilities")
-else()
-  message(STATUS "Not building debug utilities")
-endif()
+
 
 if(BUILD_DOCUMENTATION)
   set(DOC_GRAPHS "YES" CACHE STRING "Create dependency graphs (needs graphviz)")
@@ -1021,14 +739,3 @@ option(BUILD_GUI_DEPS "Build GUI dependencies." OFF)
 option(INSTALL_VENDORED_LIBUNBOUND "Install libunbound binary built from source vendored with this repo." OFF)
 
 
-CHECK_C_COMPILER_FLAG(-std=c11 HAVE_C11)
-
-find_package(PythonInterp)
-find_program(iwyu_tool_path NAMES iwyu_tool.py iwyu_tool)
-if (iwyu_tool_path AND PYTHONINTERP_FOUND)
-  add_custom_target(iwyu
-    COMMAND "${PYTHON_EXECUTABLE}" "${iwyu_tool_path}" -p "${CMAKE_BINARY_DIR}" -- --no_fwd_decls
-    COMMENT "Running include-what-you-use tool"
-    VERBATIM
-  )
-endif()

CMakeLists_IOS.txt

@@ -1,4 +1,4 @@
-# Portions Copyright (c) 2017-2019, The Monero Project
+# Portions Copyright (c) 2017, The Monero Project
 # This file is based off of the https://code.google.com/archive/p/ios-cmake/
 # It has been altered for Monero iOS development
 #

CONTRIBUTING.md

@@ -1,172 +1,40 @@
 # Contributing to Monero
 
 A good way to help is to test, and report bugs. See
-[How to Report Bugs Effectively (by Simon Tatham)](https://www.chiark.greenend.org.uk/~sgtatham/bugs.html)
+[How to Report Bugs Effectively (by Simon Tatham)](http://www.chiark.greenend.org.uk/~sgtatham/bugs.html)
 if you want to help that way. Testing is invaluable in making a piece
 of software solid and usable.
 
 
-## General guidelines
+## General Guidelines
 
 * Comments are encouraged.
 * If modifying code for which Doxygen headers exist, that header must be modified to match.
 * Tests would be nice to have if you're adding functionality.
 
-Patches are preferably to be sent via a Github pull request. If that
+Patches are preferably to be sent via a github pull request. If that
 can't be done, patches in "git format-patch" format can be sent
 (eg, posted to fpaste.org with a long enough timeout and a link
 posted to #monero-dev on irc.freenode.net).
 
 Patches should be self contained. A good rule of thumb is to have
 one patch per separate issue, feature, or logical change. Also, no
-other changes, such as random whitespace changes, reindentation,
-or fixing typoes, spelling, or wording, unless user visible.
+other changes, such as random whitespace changes or reindentation.
 Following the code style of the particular chunk of code you're
-modifying is encouraged. Proper squashing should be done (eg, if
+modifying is encourgaged. Proper squashing should be done (eg, if
 you're making a buggy patch, then a later patch to fix the bug,
 both patches should be merged).
 
-If you've made random unrelated changes (either because your editor
-is annoying or you made them for other reasons), you can select
-what changes go into the coming commit using git add -p, which
-walks you through all the changes and asks whether or not to
-include this particular change. This helps create clean patches
-without any irrelevant changes. git diff will show you the changes
-in your tree. git diff --cached will show what is currently staged
-for commit. As you add hunks with git add -p, those hunks will
-"move" from the git diff output to the git diff --cached output,
-so you can see clearly what your commit is going to look like.
-
-## Commits and pull requests
+## Commits and Pull Requests
 
 Commit messages should be sensible. That means a subject line that
 describes the patch, with an optional longer body that gives details,
 documentation, etc.
 
-When submitting a pull request on Github, make sure your branch is
+When submitting a pull request on github, make sure your branch is
 rebased. No merge commits nor stray commits from other people in
 your submitted branch, please. You may be asked to rebase if there
 are conflicts (even trivially resolvable ones).
 
 PGP signing commits is strongly encouraged. That should explain why
 the previous paragraph is here.
-
-# [Code of Conduct (22/C4.1)](http://rfc.zeromq.org/spec:22)
-
-## License
-
-Copyright (c) 2009-2015 Pieter Hintjens.
-Copyright (c) 2017-2018 The Monero Project.
-
-This Specification is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version.
-
-This Specification is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with this program; if not, see <http://www.gnu.org/licenses>.
-
-## Language
-
-The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.
-
-The "Monero Maintainer Team" is defined in this document as the following users:
-- fluffypony
-- moneromooo
-- hyc
-
-## Goals
-
-C4 is meant to provide a reusable optimal collaboration model for open source software projects. It has these specific goals:
-
-- To maximize the scale and diversity of the community around a project, by reducing the friction for new Contributors and creating a scaled participation model with strong positive feedbacks;
-- To relieve dependencies on key individuals by separating different skill sets so that there is a larger pool of competence in any required domain;
-- To allow the project to develop faster and more accurately, by increasing the diversity of the decision making process;
-- To support the natural life cycle of project versions from experimental through to stable, by allowing safe experimentation, rapid failure, and isolation of stable code;
-- To reduce the internal complexity of project repositories, thus making it easier for Contributors to participate and reducing the scope for error;
-- To enforce collective ownership of the project, which increases economic incentive to Contributors and reduces the risk of hijack by hostile entities.
-
-## Design
-
-### Preliminaries
-
-- The project MUST use the git distributed revision control system.
-- The project MUST be hosted on github.com or equivalent, herein called the "Platform".
-- The project MUST use the Platform issue tracker.
-  - Non-GitHub example:
-    - "Platform" could be a vanilla git repo and Trac hosted on the same machine/network.
-    - The Platform issue tracker would be Trac.
-- The project SHOULD have clearly documented guidelines for code style.
-- A "Contributor" is a person who wishes to provide a patch, being a set of commits that solve some clearly identified problem.
-- A "Maintainer" is a person who merges patches to the project. Maintainers are not developers; their job is to enforce process.
-- Contributors MUST NOT have commit access to the repository unless they are also Maintainers.
-- Maintainers MUST have commit access to the repository.
-- Everyone, without distinction or discrimination, MUST have an equal right to become a Contributor under the terms of this contract.
-
-### Licensing and ownership
-
-- The project MUST use a share-alike license, such as BSD-3, the GPLv3 or a variant thereof (LGPL, AGPL), or the MPLv2.
-- All contributions to the project source code ("patches") MUST use the same license as the project.
-- All patches are owned by their authors. There MUST NOT be any copyright assignment process.
-- The copyrights in the project MUST be owned collectively by all its Contributors.
-- Each Contributor MUST be responsible for identifying themselves in the project Contributor list.
-
-### Patch requirements
-
-- Maintainers MUST have a Platform account and SHOULD use their real names or a well-known alias.
-- Contributors SHOULD have a Platform account and MAY use their real names or a well-known alias.
-- A patch SHOULD be a minimal and accurate answer to exactly one identified and agreed problem.
-- A patch MUST adhere to the code style guidelines of the project if these are defined.
-- A patch MUST adhere to the "Evolution of Public Contracts" guidelines defined below.
-- A patch MUST NOT include non-trivial code from other projects unless the Contributor is the original author of that code.
-- A patch MUST compile cleanly and pass project self-tests on at least the principle target platform.
-- A patch commit message SHOULD consist of a single short (less than 50 character) line summarizing the change, optionally followed by a blank line and then a more thorough description.
-- A "Correct Patch" is one that satisfies the above requirements.
-
-### Development process
-
-- Change on the project MUST be governed by the pattern of accurately identifying problems and applying minimal, accurate solutions to these problems.
-- To request changes, a user SHOULD log an issue on the project Platform issue tracker.
-- The user or Contributor SHOULD write the issue by describing the problem they face or observe.
-- The user or Contributor SHOULD seek consensus on the accuracy of their observation, and the value of solving the problem.
-- Users MUST NOT log feature requests, ideas, or suggestions unrelated to Monero code or Monero's dependency code or Monero's potential/future dependency code or research which successfully implements Monero.
-- Users MUST NOT log any solutions to problems (verifiable or hypothetical) of which are not explicitly documented and/or not provable and/or cannot be reasonably proven.
-- Thus, the release history of the project MUST be a list of meaningful issues logged and solved.
-- To work on an issue, a Contributor MUST fork the project repository and then work on their forked repository.
-- To submit a patch, a Contributor MUST create a Platform pull request back to the project.
-- A Contributor MUST NOT commit changes directly to the project.
-- To discuss a patch, people MAY comment on the Platform pull request, on the commit, or elsewhere.
-- To accept or reject a patch, a Maintainer MUST use the Platform interface.
-- Maintainers SHOULD NOT merge their own patches except in exceptional cases, such as non-responsiveness from other Maintainers for an extended period (more than 30 days) or unless urgent as defined by the Monero Maintainers Team.
-- Maintainers MUST NOT make value judgments on correct patches unless the Maintainer (as may happen in rare circumstances) is a core code developer.
-- Maintainers MUST NOT merge pull requests in less than 168 hours (1 week) unless deemed urgent by at least 2 people from the Monero Maintainer Team.
-- The Contributor MAY tag an issue as "Ready" after making a pull request for the issue.
-- The user who created an issue SHOULD close the issue after checking the patch is successful.
-- Maintainers SHOULD ask for improvements to incorrect patches and SHOULD reject incorrect patches if the Contributor does not respond constructively.
-- Any Contributor who has value judgments on a correct patch SHOULD express these via their own patches.
-- Maintainers MAY commit changes to non-source documentation directly to the project.
-
-### Creating stable releases
-
-- The project MUST have one branch ("master") that always holds the latest in-progress version and SHOULD always build.
-- The project MUST NOT use topic branches for any reason. Personal forks MAY use topic branches.
-- To make a stable release someone MUST fork the repository by copying it and thus become maintainer of this repository.
-- Forking a project for stabilization MAY be done unilaterally and without agreement of project maintainers.
-- A patch to a stabilization project declared "stable" MUST be accompanied by a reproducible test case.
-
-### Evolution of public contracts
-
-- All Public Contracts (APIs or protocols) MUST be documented.
-- All Public Contracts SHOULD have space for extensibility and experimentation.
-- A patch that modifies a stable Public Contract SHOULD not break existing applications unless there is overriding consensus on the value of doing this.
-- A patch that introduces new features to a Public Contract SHOULD do so using new names.
-- Old names SHOULD be deprecated in a systematic fashion by marking new names as "experimental" until they are stable, then marking the old names as "deprecated".
-- When sufficient time has passed, old deprecated names SHOULD be marked "legacy" and eventually removed.
-- Old names MUST NOT be reused by new features.
-- When old names are removed, their implementations MUST provoke an exception (assertion) if used by applications.
-
-### Project administration
-
-- The project founders MUST act as Administrators to manage the set of project Maintainers.
-- The Administrators MUST ensure their own succession over time by promoting the most effective Maintainers.
-- A new Contributor who makes a correct patch MUST be invited to become a Maintainer.
-- Administrators MAY remove Maintainers who are inactive for an extended period of time, or who repeatedly fail to apply this process accurately.
-- Administrators SHOULD block or ban "bad actors" who cause stress and pain to others in the project. This should be done after public discussion, with a chance for all parties to speak. A bad actor is someone who repeatedly ignores the rules and culture of the project, who is needlessly argumentative or hostile, or who is offensive, and who is unable to self-correct their behavior when asked to do so by others.

Dockerfile

@@ -1,212 +1,45 @@
-# Multistage docker build, requires docker 17.05
-
-# builder stage
-FROM ubuntu:16.04 as builder
-
-RUN set -ex && \
-    apt-get update && \
-    apt-get --no-install-recommends --yes install \
-        ca-certificates \
-        cmake \
-        g++ \
-        make \
-        pkg-config \
-        graphviz \
-        doxygen \
-        git \
-        curl \
-        libtool-bin \
-        autoconf \
-        automake \
-        bzip2 \
-        xsltproc \
-        gperf \
-        unzip
-
-WORKDIR /usr/local
-
-ENV CFLAGS='-fPIC'
-ENV CXXFLAGS='-fPIC'
-
-#Cmake
-ARG CMAKE_VERSION=3.14.6
-ARG CMAKE_VERSION_DOT=v3.14
-ARG CMAKE_HASH=4e8ea11cabe459308671b476469eace1622e770317a15951d7b55a82ccaaccb9
-RUN set -ex \
-    && curl -s -O https://cmake.org/files/${CMAKE_VERSION_DOT}/cmake-${CMAKE_VERSION}.tar.gz \
-    && echo "${CMAKE_HASH}  cmake-${CMAKE_VERSION}.tar.gz" | sha256sum -c \
-    && tar -xzf cmake-${CMAKE_VERSION}.tar.gz \
-    && cd cmake-${CMAKE_VERSION} \
-    && ./configure \
-    && make \
-    && make install
-
-## Boost
-ARG BOOST_VERSION=1_70_0
-ARG BOOST_VERSION_DOT=1.70.0
-ARG BOOST_HASH=430ae8354789de4fd19ee52f3b1f739e1fba576f0aded0897c3c2bc00fb38778
-RUN set -ex \
-    && curl -s -L -o  boost_${BOOST_VERSION}.tar.bz2 https://dl.bintray.com/boostorg/release/${BOOST_VERSION_DOT}/source/boost_${BOOST_VERSION}.tar.bz2 \
-    && echo "${BOOST_HASH}  boost_${BOOST_VERSION}.tar.bz2" | sha256sum -c \
-    && tar -xvf boost_${BOOST_VERSION}.tar.bz2 \
-    && cd boost_${BOOST_VERSION} \
-    && ./bootstrap.sh \
-    && ./b2 --build-type=minimal link=static runtime-link=static --with-chrono --with-date_time --with-filesystem --with-program_options --with-regex --with-serialization --with-system --with-thread --with-locale threading=multi threadapi=pthread cflags="$CFLAGS" cxxflags="$CXXFLAGS" stage
-ENV BOOST_ROOT /usr/local/boost_${BOOST_VERSION}
-
-# OpenSSL
-ARG OPENSSL_VERSION=1.1.1g
-ARG OPENSSL_HASH=ddb04774f1e32f0c49751e21b67216ac87852ceb056b75209af2443400636d46
-RUN set -ex \
-    && curl -s -O https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz \
-    && echo "${OPENSSL_HASH}  openssl-${OPENSSL_VERSION}.tar.gz" | sha256sum -c \
-    && tar -xzf openssl-${OPENSSL_VERSION}.tar.gz \
-    && cd openssl-${OPENSSL_VERSION} \
-    && ./Configure linux-x86_64 no-shared --static "$CFLAGS" \
-    && make build_generated \
-    && make libcrypto.a \
-    && make install
-ENV OPENSSL_ROOT_DIR=/usr/local/openssl-${OPENSSL_VERSION}
-
-# ZMQ
-ARG ZMQ_VERSION=v4.3.2
-ARG ZMQ_HASH=a84ffa12b2eb3569ced199660bac5ad128bff1f0
-RUN set -ex \
-    && git clone https://github.com/zeromq/libzmq.git -b ${ZMQ_VERSION} \
-    && cd libzmq \
-    && test `git rev-parse HEAD` = ${ZMQ_HASH} || exit 1 \
-    && ./autogen.sh \
-    && ./configure --enable-static --disable-shared \
-    && make \
-    && make install \
-    && ldconfig
-
-# zmq.hpp
-ARG CPPZMQ_VERSION=v4.4.1
-ARG CPPZMQ_HASH=f5b36e563598d48fcc0d82e589d3596afef945ae
-RUN set -ex \
-    && git clone https://github.com/zeromq/cppzmq.git -b ${CPPZMQ_VERSION} \
-    && cd cppzmq \
-    && test `git rev-parse HEAD` = ${CPPZMQ_HASH} || exit 1 \
-    && mv *.hpp /usr/local/include
-
-# Readline
-ARG READLINE_VERSION=8.0
-ARG READLINE_HASH=e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461
-RUN set -ex \
-    && curl -s -O https://ftp.gnu.org/gnu/readline/readline-${READLINE_VERSION}.tar.gz \
-    && echo "${READLINE_HASH}  readline-${READLINE_VERSION}.tar.gz" | sha256sum -c \
-    && tar -xzf readline-${READLINE_VERSION}.tar.gz \
-    && cd readline-${READLINE_VERSION} \
-    && ./configure \
-    && make \
-    && make install
-
-# Sodium
-ARG SODIUM_VERSION=1.0.18
-ARG SODIUM_HASH=4f5e89fa84ce1d178a6765b8b46f2b6f91216677
-RUN set -ex \
-    && git clone https://github.com/jedisct1/libsodium.git -b ${SODIUM_VERSION} \
-    && cd libsodium \
-    && test `git rev-parse HEAD` = ${SODIUM_HASH} || exit 1 \
-    && ./autogen.sh \
-    && ./configure \
-    && make \
-    && make check \
-    && make install
-
-# Udev
-ARG UDEV_VERSION=v3.2.8
-ARG UDEV_HASH=d69f3f28348123ab7fa0ebac63ec2fd16800c5e0
-RUN set -ex \
-    && git clone https://github.com/gentoo/eudev -b ${UDEV_VERSION} \
-    && cd eudev \
-    && test `git rev-parse HEAD` = ${UDEV_HASH} || exit 1 \
-    && ./autogen.sh \
-    && ./configure --disable-gudev --disable-introspection --disable-hwdb --disable-manpages --disable-shared \
-    && make \
-    && make install
-
-# Libusb
-ARG USB_VERSION=v1.0.22
-ARG USB_HASH=0034b2afdcdb1614e78edaa2a9e22d5936aeae5d
-RUN set -ex \
-    && git clone https://github.com/libusb/libusb.git -b ${USB_VERSION} \
-    && cd libusb \
-    && test `git rev-parse HEAD` = ${USB_HASH} || exit 1 \
-    && ./autogen.sh \
-    && ./configure --disable-shared \
-    && make \
-    && make install
-
-# Hidapi
-ARG HIDAPI_VERSION=hidapi-0.8.0-rc1
-ARG HIDAPI_HASH=40cf516139b5b61e30d9403a48db23d8f915f52c
-RUN set -ex \
-    && git clone https://github.com/signal11/hidapi -b ${HIDAPI_VERSION} \
-    && cd hidapi \
-    && test `git rev-parse HEAD` = ${HIDAPI_HASH} || exit 1 \
-    && ./bootstrap \
-    && ./configure --enable-static --disable-shared \
-    && make \
-    && make install
-
-# Protobuf
-ARG PROTOBUF_VERSION=v3.7.1
-ARG PROTOBUF_HASH=6973c3a5041636c1d8dc5f7f6c8c1f3c15bc63d6
-RUN set -ex \
-    && git clone https://github.com/protocolbuffers/protobuf -b ${PROTOBUF_VERSION} \
-    && cd protobuf \
-    && test `git rev-parse HEAD` = ${PROTOBUF_HASH} || exit 1 \
-    && git submodule update --init --recursive \
-    && ./autogen.sh \
-    && ./configure --enable-static --disable-shared \
-    && make \
-    && make install \
-    && ldconfig
-
-WORKDIR /src
-COPY . .
-
-ENV USE_SINGLE_BUILDDIR=1
-ARG NPROC
-RUN set -ex && \
-    git submodule init && git submodule update && \
-    rm -rf build && \
-    if [ -z "$NPROC" ] ; \
-    then make -j$(nproc) release-static ; \
-    else make -j$NPROC release-static ; \
-    fi
-
-# runtime stage
 FROM ubuntu:16.04
 
-RUN set -ex && \
-    apt-get update && \
-    apt-get --no-install-recommends --yes install ca-certificates && \
-    apt-get clean && \
-    rm -rf /var/lib/apt
-COPY --from=builder /src/build/release/bin /usr/local/bin/
+ENV SRC_DIR /usr/local/src/monero
 
-# Create monero user
-RUN adduser --system --group --disabled-password monero && \
-	mkdir -p /wallet /home/monero/.bitmonero && \
-	chown -R monero:monero /home/monero/.bitmonero && \
-	chown -R monero:monero /wallet
+RUN set -x \
+  && buildDeps=' \
+      ca-certificates \
+      cmake \
+      g++ \
+      git \
+      libboost1.58-all-dev \
+      libssl-dev \
+      make \
+      pkg-config \
+  ' \
+  && apt-get -qq update \
+  && apt-get -qq --no-install-recommends install $buildDeps
+
+RUN git clone https://github.com/monero-project/monero.git $SRC_DIR
+WORKDIR $SRC_DIR
+RUN make -j$(nproc) release-static
+
+RUN cp build/release/bin/* /usr/local/bin/ \
+  \
+  && rm -r $SRC_DIR \
+  && apt-get -qq --auto-remove purge $buildDeps
 
 # Contains the blockchain
-VOLUME /home/monero/.bitmonero
+VOLUME /root/.bitmonero
 
 # Generate your wallet via accessing the container and run:
 # cd /wallet
 # monero-wallet-cli
 VOLUME /wallet
 
+ENV LOG_LEVEL 0
+ENV P2P_BIND_IP 0.0.0.0
+ENV P2P_BIND_PORT 18080
+ENV RPC_BIND_IP 127.0.0.1
+ENV RPC_BIND_PORT 18081
+
 EXPOSE 18080
 EXPOSE 18081
 
-# switch to user monero
-USER monero
-
-ENTRYPOINT ["monerod", "--p2p-bind-ip=0.0.0.0", "--p2p-bind-port=18080", "--rpc-bind-ip=0.0.0.0", "--rpc-bind-port=18081", "--non-interactive", "--confirm-external-bind"]
-
+CMD monerod --log-level=$LOG_LEVEL --p2p-bind-ip=$P2P_BIND_IP --p2p-bind-port=$P2P_BIND_PORT --rpc-bind-ip=$RPC_BIND_IP --rpc-bind-port=$RPC_BIND_PORT

Doxyfile

@@ -20,7 +20,7 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See https://www.gnu.org/software/libiconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
 # for the list of possible encodings.
 # The default value is: UTF-8.
 
@@ -285,7 +285,7 @@ EXTENSION_MAPPING      =
 
 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
 # according to the Markdown format, which allows for more readable
-# documentation. See https://daringfireball.net/projects/markdown/ for details.
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
 # The output of markdown processing is further processed by doxygen, so you can
 # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
 # case of backward compatibilities issues.
@@ -318,7 +318,7 @@ BUILTIN_STL_SUPPORT    = NO
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# https://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -677,7 +677,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. Do not use file names with spaces, bibtex cannot handle them. See
@@ -759,7 +759,7 @@ INPUT                  = src
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv) for the list of
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -951,7 +951,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see https://www.gnu.org/software/global/global.html). You will need version
+# (see http://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1094,7 +1094,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the stylesheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1152,12 +1152,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/tools/xcode/), introduced with
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1197,7 +1197,7 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
 # Windows.
 #
 # The HTML Help Workshop contains a compiler that can convert all HTML output
@@ -1273,7 +1273,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1281,7 +1281,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
 # folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
@@ -1290,7 +1290,7 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1298,7 +1298,7 @@ QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1306,7 +1306,7 @@ QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1411,7 +1411,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# https://www.mathjax.org) which uses client side Javascript for the rendering
+# http://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using prerendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1423,7 +1423,7 @@ USE_MATHJAX            = NO
 
 # When MathJax is enabled you can set the default output format to be used for
 # the MathJax output. See the MathJax site (see:
-# https://docs.mathjax.org/en/latest/output.html) for more details.
+# http://docs.mathjax.org/en/latest/output.html) for more details.
 # Possible values are: HTML-CSS (which is slower, but has the best
 # compatibility), NativeMML (i.e. MathML) and SVG.
 # The default value is: HTML-CSS.
@@ -1438,11 +1438,11 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from https://www.mathjax.org before deployment.
-# The default value is: https://cdn.mathjax.org/mathjax/latest.
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
-MATHJAX_RELPATH        = https://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
 # extension names that should be enabled during MathJax rendering. For example
@@ -1453,7 +1453,7 @@ MATHJAX_EXTENSIONS     =
 
 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: https://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1500,7 +1500,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer ( doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see: http://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1513,7 +1513,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer ( doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1684,7 +1684,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -2051,7 +2051,7 @@ HIDE_UNDOC_RELATIONS   = YES
 
 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
 # available from the path. This tool is part of Graphviz (see:
-# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
 # Bell Labs. The other options in this section have no effect if this option is
 # set to NO
 # The default value is: NO.

LEVIN_PROTOCOL.md

@@ -1,165 +0,0 @@
-# Levin Protocol
-This is a document explaining the current design of the levin protocol, as
-used by Monero. The protocol is largely inherited from cryptonote, but has
-undergone some changes.
-
-This document also may differ from the `struct bucket_head2` in Monero's
-code slightly - the spec here is slightly more strict to allow for
-extensibility.
-
-One of the goals of this document is to clearly indicate what is being sent
-"on the wire" to identify metadata that could de-anonymize users over I2P/Tor.
-These issues will be addressed as they are found. See `ANONMITY_NETWORKS.md` in
-the top-level folder for any outstanding issues.
-
-> This document does not currently list all data being sent by the monero
-> protocol, that portion is a work-in-progress. Please take the time to do it
-> if interested in learning about Monero p2p traffic!
-
-
-## Header
-This header is sent for every Monero p2p message.
-
-```
- 0               1               2               3
- 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|      0x01     |      0x21     |      0x01     |      0x01     |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|      0x01     |      0x01     |      0x01     |      0x01     |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|                             Length                            |
-|                                                               |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|  E. Response  |                   Command
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                |                 Return Code
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                |Q|S|B|E|               Reserved
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                |      0x01     |      0x00     |      0x00     |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|     0x00      |
-+-+-+-+-+-+-+-+-+
-```
-
-### Signature
-The first 8 bytes are the "signature" which helps identify the protocol (in
-case someone connected to the wrong port, etc). The comments indicate that byte
-sequence is from "benders nightmare".
-
-This also can be used by deep packet inspection (DPI) engines to identify
-Monero when the link is not encrypted. SSL has been proposed as a means to
-mitigate this issue, but BIP-151 or the Noise protocol should also be considered.
-
-### Length
-The length is an unsigned 64-bit little endian integer. The length does _not_
-include the header.
-
-The implementation currently rejects received messages that exceed 100 MB
-(base 10) by default.
-
-### Expect Response
-A zero-byte if no response is expected from the peer, and a non-zero byte if a
-response is expected from the peer. Peers must respond to requests with this
-flag in the same order that they were received, however, other messages can be
-sent between responses.
-
-There are some commands in the
-[cryptonote protocol](#cryptonote-protocol-commands) where a response is
-expected from the peer, but this flag is not set. Those responses are returned
-as notify messages and can be sent in any order by the peer.
-
-### Command
-An unsigned 32-bit little endian integer representing the Monero specific
-command being invoked.
-
-### Return Code
-A signed 32-bit little integer integer representing the response from the peer
-from the last command that was invoked. This is `0` for request messages.
-
-### Flags
- * `Q` - Bit is set if the message is a request.
- * `S` - Bit is set if the message is a response.
- * `B` - Bit is set if this is a the beginning of a [fragmented message](#fragmented-messages).
- * `E` - Bit is set if this is the end of a [fragmented message](#fragmented-messages).
-
-### Version
-A fixed value of `1` as an unsigned 32-bit little endian integer.
-
-
-## Message Flow
-The protocol can be subdivided into: (1) notifications, (2) requests,
-(3) responses, (4) fragmented messages, and (5) dummy messages. Response
-messages must be sent in the same order that a peer issued a request message.
-A peer does not have to send a response immediately following a request - any
-other message type can be sent instead.
-
-### Notifications
-Notifications are one-way messages that can be sent at any time without
-an expectation of a response from the peer. The `Q` bit must be set, the `S`,
-`B` and `E` bits must be unset, and the `Expect Response` field must be zeroed.
-
-Some notifications must be in response to other notifications. This is not
-part of the levin messaging layer, and is described in the
-[commands](#commands) section.
-
-### Requests
-Requests are the basis of the admin protocol for Monero. The `Q` bit must be
-set, the `S`, `B` and `E` bits must be unset, and the `Expect Response` field
-must be non-zero. The peer is expected to send a response message with the same
-`command` number.
-
-### Responses
-Response message can only be sent after a peer first issues a request message.
-Responses must have the `S` bit set, the `Q`, `B` and `E` bits unset, and have
-a zeroed `Expect Response` field. The `Command` field must be the same value
-that was sent in the request message. The `Return Code` is specific to the
-`Command` being issued (see [commands])(#commands)).
-
-### Fragmented
-Fragmented messages were introduced for the "white noise" feature for i2p/tor.
-A transaction can be sent in fragments to conceal when "real" data is being
-sent instead of dummy messages. Only one fragmented message can be sent at a
-time, and bits `B` and `E` are never set at the same time
-(see [dummy messages](#dummy)). The re-constructed message must contain a
-levin header for a different (non-fragment) message type.
-
-The `Q` and `S` bits are never set and the `Expect Response` field must always
-be zero. The first fragment has the `B` bit set, neither `B` nor `E` is set for
-"middle" fragments, and `E` is set for the last fragment.
-
-### Dummy
-Dummy messages have the `B` and `E` bits set, the `Q` and `S` bits unset, and
-the `Expect Reponse` field zeroed. When a message of this type is received, the
-contents can be safely ignored.
-
-
-## Commands
-### P2P (Admin) Commands
-
-#### (`1001` Request) Handshake
-#### (`1001` Response) Handshake
-#### (`1002` Request) Timed Sync
-#### (`1002` Response) Timed Sync
-#### (`1003` Request) Ping
-#### (`1003` Response) Ping
-#### (`1004` Request) Stat Info
-#### (`1004` Response) Stat Info
-#### (`1005` Request) Network State
-#### (`1005` Response) Network State
-#### (`1006` Request) Peer ID
-#### (`1006` Reponse) Peer ID
-#### (`1007` Request) Support Flags
-#### (`1007` Response) Support Flags
-
-### Cryptonote Protocol Commands
-
-#### (`2001` Notification) New Block
-#### (`2002` Notification) New Transactions
-#### (`2003` Notification) Request Get Objects
-#### (`2004` Notification) Response Get Objects
-#### (`2006` Notification) Request Chain
-#### (`2007` Notification) Response Chain Entry
-#### (`2008` Notification) New Fluffy Block
-#### (`2009` Notification) Request Fluffy Missing TX

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2014-2019, The Monero Project
+Copyright (c) 2014-2017, The Monero Project
 
 All rights reserved.
 
@@ -29,13 +29,3 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 Parts of the project are originally copyright (c) 2012-2013 The Cryptonote
 developers
-
-Parts of the project are originally copyright (c) 2014 The Boolberry
-developers, distributed under the MIT licence:
-
-  Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-  The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-

Makefile

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2019, The Monero Project
+# Copyright (c) 2014-2017, The Monero Project
 #
 # All rights reserved.
 #
@@ -26,153 +26,101 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-ANDROID_STANDALONE_TOOLCHAIN_PATH ?= /usr/local/toolchain
-
-dotgit=$(shell ls -d .git/config)
-ifneq ($(dotgit), .git/config)
-  USE_SINGLE_BUILDDIR=1
-endif
-
-subbuilddir:=$(shell echo  `uname | sed -e 's|[:/\\ \(\)]|_|g'`/`git branch | grep '\* ' | cut -f2- -d' '| sed -e 's|[:/\\ \(\)]|_|g'`)
-ifeq ($(USE_SINGLE_BUILDDIR),)
-  builddir := build/"$(subbuilddir)"
-  topdir   := ../../../..
-  deldirs  := $(builddir)
-else
-  builddir := build
-  topdir   := ../..
-  deldirs  := $(builddir)/debug $(builddir)/release $(builddir)/fuzz
-endif
-
 all: release-all
 
-depends:
-	cd contrib/depends && $(MAKE) HOST=$(target) && cd ../.. && mkdir -p build/$(target)/release
-	cd build/$(target)/release && cmake -DCMAKE_TOOLCHAIN_FILE=$(CURDIR)/contrib/depends/$(target)/share/toolchain.cmake ../../.. && $(MAKE)
-
 cmake-debug:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D CMAKE_BUILD_TYPE=Debug $(topdir)
+	mkdir -p build/debug
+	cd build/debug && cmake -D CMAKE_BUILD_TYPE=Debug ../..
 
 debug: cmake-debug
-	cd $(builddir)/debug && $(MAKE)
+	cd build/debug && $(MAKE)
 
-# Temporarily disable some tests:
-#  * libwallet_api_tests fail (Issue #895)
 debug-test:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
-
-debug-test-asan:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D SANITIZE=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
-
-debug-test-trezor:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D TREZOR_DEBUG=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug ../.. && $(MAKE) && $(MAKE) test
 
 debug-all:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D BUILD_SHARED_LIBS=OFF -D CMAKE_BUILD_TYPE=Debug $(topdir) && $(MAKE)
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D BUILD_SHARED_LIBS=OFF -D CMAKE_BUILD_TYPE=Debug ../.. && $(MAKE)
 
 debug-static-all:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D STATIC=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) && $(MAKE)
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D STATIC=ON -D CMAKE_BUILD_TYPE=Debug ../.. && $(MAKE)
 
-debug-static-win64:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Debug -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
- 
-debug-static-win32:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Debug -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
- 
 cmake-release:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D CMAKE_BUILD_TYPE=Release $(topdir)
+	mkdir -p build/release
+	cd build/release && cmake -D CMAKE_BUILD_TYPE=Release ../..
 
 release: cmake-release
-	cd $(builddir)/release && $(MAKE)
+	cd build/release && $(MAKE)
 
 release-test:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=release $(topdir) && $(MAKE) && $(MAKE) test
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE) && $(MAKE) test
 
 release-all:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=release $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE)
 
 release-static:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE)
 
 coverage:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug -D COVERAGE=ON $(topdir) && $(MAKE) && $(MAKE) test
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug -D COVERAGE=ON ../.. && $(MAKE) && $(MAKE) test
 
 # Targets for specific prebuilt builds which will be advertised for updates by their build tag
 
 release-static-linux-armv6:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv6zk" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv6" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv6zk" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv6" ../.. && $(MAKE)
 
 release-static-linux-armv7:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv7" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv7" ../.. && $(MAKE)
 
-release-static-android-armv7:
-	mkdir -p $(builddir)/release/translations
-	cd $(builddir)/release/translations && cmake ../../../translations && $(MAKE)
-	cd $(builddir)/release && CC=arm-linux-androideabi-clang CXX=arm-linux-androideabi-clang++ cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D ANDROID=true -D INSTALL_VENDORED_LIBUNBOUND=ON -D BUILD_TAG="android-armv7" -D CMAKE_SYSTEM_NAME="Android" -D CMAKE_ANDROID_STANDALONE_TOOLCHAIN="${ANDROID_STANDALONE_TOOLCHAIN_PATH}" -D CMAKE_ANDROID_ARM_MODE=ON -D CMAKE_ANDROID_ARCH_ABI="armeabi-v7a" ../.. && $(MAKE)
-
-release-static-android-armv8:
-	mkdir -p $(builddir)/release/translations
-	cd $(builddir)/release/translations && cmake ../../../translations && $(MAKE)
-	cd $(builddir)/release && CC=aarch64-linux-android-clang CXX=aarch64-linux-android-clang++ cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D ANDROID=true -D INSTALL_VENDORED_LIBUNBOUND=ON -D BUILD_TAG="android-armv8" -D CMAKE_SYSTEM_NAME="Android" -D CMAKE_ANDROID_STANDALONE_TOOLCHAIN="${ANDROID_STANDALONE_TOOLCHAIN_PATH}" -D CMAKE_ANDROID_ARCH_ABI="arm64-v8a" ../.. && $(MAKE)
+release-static-android:
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D ANDROID=true -D INSTALL_VENDORED_LIBUNBOUND=ON -D BUILD_TAG="android" ../.. && $(MAKE)
 
 release-static-linux-armv8:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv8" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv8" ../.. && $(MAKE)
 
 release-static-linux-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x64" ../.. && $(MAKE)
 
 release-static-freebsd-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="freebsd-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="freebsd-x64" ../.. && $(MAKE)
 
 release-static-mac-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="mac-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="mac-x64" ../.. && $(MAKE)
 
 release-static-linux-i686:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x86" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x86" ../.. && $(MAKE)
 
 release-static-win64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=../../cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys64 ../.. && $(MAKE)
 
 release-static-win32:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=../../cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys32 ../.. && $(MAKE)
 
 fuzz:
-	mkdir -p $(builddir)/fuzz
-	cd $(builddir)/fuzz && cmake -D STATIC=ON -D SANITIZE=ON -D BUILD_TESTS=ON -D USE_LTO=OFF -D CMAKE_C_COMPILER=afl-gcc -D CMAKE_CXX_COMPILER=afl-g++ -D ARCH="x86-64" -D CMAKE_BUILD_TYPE=fuzz -D BUILD_TAG="linux-x64" $(topdir) && $(MAKE)
+	mkdir -p build/fuzz
+	cd build/fuzz && cmake -D BUILD_TESTS=ON -D USE_LTO=OFF -D CMAKE_C_COMPILER=afl-gcc -D CMAKE_CXX_COMPILER=afl-g++ -D ARCH="x86-64" -D CMAKE_BUILD_TYPE=fuzz -D BUILD_TAG="linux-x64" ../.. && $(MAKE)
 
 clean:
-	@echo "WARNING: Back-up your wallet if it exists within ./"$(deldirs)"!" ; \
-    read -r -p "This will destroy the build directory, continue (y/N)?: " CONTINUE; \
-	[ $$CONTINUE = "y" ] || [ $$CONTINUE = "Y" ] || (echo "Exiting."; exit 1;)
-	rm -rf $(deldirs)
-
-clean-all:
 	@echo "WARNING: Back-up your wallet if it exists within ./build!" ; \
-	read -r -p "This will destroy all build directories, continue (y/N)?: " CONTINUE; \
+        read -r -p "This will destroy the build directory, continue (y/N)?: " CONTINUE; \
 	[ $$CONTINUE = "y" ] || [ $$CONTINUE = "Y" ] || (echo "Exiting."; exit 1;)
-	rm -rf ./build
+	rm -rf build
 
 tags:
 	ctags -R --sort=1 --c++-kinds=+p --fields=+iaS --extra=+q --language-force=C++ src contrib tests/gtest

README.i18n.md

@@ -1,13 +1,13 @@
 Monero daemon internationalization
 ==================================
 
-The Monero command line tools can be translated in various languages. If you wish to contribute and need help/support, contact the [Monero Localization Workgroup on Taiga](https://taiga.getmonero.org/project/erciccione-monero-localization/) or come chat on `#monero-translations` (Freenode/IRC, riot/matrix, MatterMost)
+The Monero command line tools can be translated in various languages.
 
-In order to use the same translation workflow as the [Monero Core GUI](https://github.com/monero-project/monero-gui), they use Qt Linguist translation files.  However, to avoid the dependencies on Qt this normally implies, they use a custom loader to read those files at runtime.
+In order to use the same translation workflow as the [Monero Core GUI](https://github.com/monero-project/monero-core), they use Qt Linguist translation files.  However, to avoid the dependencies on Qt this normally implies, they use a custom loader to read those files at runtime.
 
 ### Tools for translators
 
-In order to create, update or build translations files, you need to have Qt tools installed. For translating, you need either the **Qt Linguist GUI** ([part of Qt Creator](https://www.qt.io/download) or a [3rd-party standalone version](https://github.com/lelegard/qtlinguist-installers/releases)), or another tool that supports Qt ts files, such as Transifex.  The files are XML, so they can be edited in any plain text editor if needed.
+In order to create, update or build translations files, you need to have Qt tools installed. For translating, you need either the **Qt Linguist GUI** ([part of QT Creator](https://www.qt.io/download-open-source/#allDownloadsDiv-9) or a [3rd-party standalone version](https://github.com/lelegard/qtlinguist-installers/releases)), or another tool that supports Qt ts files, such as Transifex.  The files are XML, so they can be edited in any plain text editor if needed.
 
 ### Creating / modifying translations
 
@@ -15,33 +15,23 @@ You do not need anything from Qt in order to use the final translations.
 
 To update ts files after changing source code:
 
-```bash
-./utils/translations/update-translations.sh
-```
+    ./utils/translations/update-translations.sh
 
 To add a new language, eg Spanish (ISO code es):
 
-```bash
-cp translations/monero.ts translations/monero_es.ts
-```
+    cp translations/monero.ts translations/monero_es.ts
 
 To edit translations for Spanish:
 
-```bash
-linguist translations/monero_es.ts
-```
+    linguist translations/monero_es.ts
 
 To build translations after modifying them:
 
-```bash
-./utils/translations/build-translations.sh
-```
+    ./utils/translations/build-translations.sh
 
 To test a translation:
 
-```bash
-LANG=es ./build/release/bin/monero-wallet-cli
-```
+    LANG=es ./build/release/bin/monero-wallet-cli
 
 To add new translatable strings in the source code:
 
@@ -49,8 +39,6 @@ Use the `tr(string)` function if possible. If the code is in a class, and this c
 
 If you're getting messages of the form:
 
-```
-Class 'cryptonote::simple_wallet' lacks Q_OBJECT macro
-```
+    Class 'cryptonote::simple_wallet' lacks Q_OBJECT macro
 
 all is fine, we don't actually need that here.

README.md

@@ -1,62 +1,31 @@
 # Monero
 
-Copyright (c) 2014-2019 The Monero Project.   
-Portions Copyright (c) 2012-2013 The Cryptonote developers.
+Copyright (c) 2014-2017, The Monero Project
+Portions Copyright (c) 2012-2013, The Cryptonote developers
 
-## Table of Contents
-
-  - [Development resources](#development-resources)
-  - [Vulnerability response](#vulnerability-response)
-  - [Research](#research)
-  - [Announcements](#announcements)
-  - [Translations](#translations)
-  - [Coverage](#coverage)
-  - [Introduction](#introduction)
-  - [About this project](#about-this-project)
-  - [Supporting the project](#supporting-the-project)
-  - [License](#license)
-  - [Contributing](#contributing)
-  - [Scheduled software upgrades](#scheduled-software-upgrades)
-  - [Release staging schedule and protocol](#release-staging-schedule-and-protocol)
-  - [Compiling Monero from source](#compiling-monero-from-source)
-    - [Dependencies](#dependencies)
-  - [Internationalization](#Internationalization)
-  - [Using Tor](#using-tor)
-  - [Debugging](#Debugging)
-  - [Known issues](#known-issues)
-
-## Development resources
+## Development Resources
 
 - Web: [getmonero.org](https://getmonero.org)
 - Forum: [forum.getmonero.org](https://forum.getmonero.org)
 - Mail: [dev@getmonero.org](mailto:dev@getmonero.org)
 - GitHub: [https://github.com/monero-project/monero](https://github.com/monero-project/monero)
-- IRC: [#monero-dev on Freenode](https://webchat.freenode.net/?randomnick=1&channels=%23monero-dev&prompt=1&uio=d4)
-- It is HIGHLY recommended that you join the #monero-dev IRC channel if you are developing software that uses Monero. Due to the nature of this open source software project, joining this channel and idling is the best way to stay updated on best practices and new developments in the Monero ecosystem. All you need to do is join the IRC channel and idle to stay updated with the latest in Monero development. If you do not, you risk wasting resources on developing integrations that are not compatible with the Monero network. The Monero core team and community continuously make efforts to communicate updates, developments, and documentation via other platforms – but for the best information, you need to talk to other Monero developers, and they are on IRC. #monero-dev is about Monero development, not getting help about using Monero, or help about development of other software, including yours, unless it also pertains to Monero code itself. For these cases, checkout #monero. 
+- IRC: [#monero-dev on Freenode](http://webchat.freenode.net/?randomnick=1&channels=%23monero-dev&prompt=1&uio=d4)
 
-## Vulnerability response
+## Build
 
-- Our [Vulnerability Response Process](https://github.com/monero-project/meta/blob/master/VULNERABILITY_RESPONSE_PROCESS.md) encourages responsible disclosure
-- We are also available via [HackerOne](https://hackerone.com/monero)
-
-## Research
-
-The [Monero Research Lab](https://src.getmonero.org/resources/research-lab/) is an open forum where the community coordinates research into Monero cryptography, protocols, fungibility, analysis, and more. We welcome collaboration and contributions from outside researchers! Because not all Lab work and publications are distributed as traditional preprints or articles, they may be easy to miss if you are conducting literature reviews for your own Monero research. You are encouraged to get in touch with our researchers if you have questions, wish to collaborate, or would like guidance to help avoid unnecessarily duplicating earlier or known work.
-
-Our researchers are available on IRC in [#monero-research-lab on Freenode](https://webchat.freenode.net/?randomnick=1&channels=%23monero-research-lab&prompt=1&uio=d4) or by email:
-
-- Sarang Noether, Ph.D.: [sarang@getmonero.org](mailto:sarang@getmonero.org) or [sarang.noether@protonmail.com](mailto:sarang.noether@protonmail.com); [research repository](https://github.com/SarangNoether/research-lab)
-- Surae Noether (Brandon Goodell), Ph.D.: [surae@getmonero.org](mailto:surae@getmonero.org) or [surae.noether@protonmail.com](mailto:surae.noether@protonmail.com); [research repository](https://github.com/b-g-goodell/research-lab)
-
-## Announcements
-
-- You can subscribe to an [announcement listserv](https://lists.getmonero.org) to get critical announcements from the Monero core team. The announcement list can be very helpful for knowing when software updates are needed.
-
-## Translations
-The CLI wallet is available in different languages. If you want to help translate it, see our self-hosted localization platform, Weblate, on [translate.getmonero.org]( https://translate.getmonero.org/projects/monero/cli-wallet/). Every translation *must* be uploaded on the platform, pull requests directly editing the code in this repository will be closed. If you need help with Weblate, you can find a guide with screenshots [here](https://github.com/monero-ecosystem/monero-translations/blob/master/weblate.md).
- 
-
-If you need help/support/info about translations, contact the localization workgroup. You can find the complete list of contacts on the repository of the workgroup: [monero-translations](https://github.com/monero-ecosystem/monero-translations#contacts).
+| Operating System      | Processor | Status |
+| --------------------- | -------- |--------|
+| Ubuntu 16.04          |  i686    | [![Ubuntu 16.04 i686](https://build.getmonero.org/png?builder=monero-static-ubuntu-i686)](https://build.getmonero.org/builders/monero-static-ubuntu-i686)
+| Ubuntu 16.04          |  amd64   | [![Ubuntu 16.04 amd64](https://build.getmonero.org/png?builder=monero-static-ubuntu-amd64)](https://build.getmonero.org/builders/monero-static-ubuntu-amd64)
+| Ubuntu 16.04          |  armv7   | [![Ubuntu 16.04 armv7](https://build.getmonero.org/png?builder=monero-static-ubuntu-arm7)](https://build.getmonero.org/builders/monero-static-ubuntu-arm7)
+| Debian Stable         |  armv8   | [![Debian armv8](https://build.getmonero.org/png?builder=monero-static-debian-armv8)](https://build.getmonero.org/builders/monero-static-debian-armv8)
+| OSX 10.10             |  amd64   | [![OSX 10.10 amd64](https://build.getmonero.org/png?builder=monero-static-osx-10.10)](https://build.getmonero.org/builders/monero-static-osx-10.10)
+| OSX 10.11             |  amd64   | [![OSX 10.11 amd64](https://build.getmonero.org/png?builder=monero-static-osx-10.11)](https://build.getmonero.org/builders/monero-static-osx-10.11)
+| OSX 10.12             |  amd64   | [![OSX 10.12 amd64](https://build.getmonero.org/png?builder=monero-static-osx-10.12)](https://build.getmonero.org/builders/monero-static-osx-10.12)
+| FreeBSD 11            |  amd64   | [![FreeBSD 11 amd64](https://build.getmonero.org/png?builder=monero-static-freebsd64)](https://build.getmonero.org/builders/monero-static-freebsd64)
+| DragonFly BSD 4.6     |  amd64   | [![DragonFly BSD amd64](https://build.getmonero.org/png?builder=monero-static-dragonflybsd-amd64)](https://build.getmonero.org/builders/monero-static-dragonflybsd-amd64)
+| Windows (MSYS2/MinGW) |  i686    | [![Windows (MSYS2/MinGW) i686](https://build.getmonero.org/png?builder=monero-static-win32)](https://build.getmonero.org/builders/monero-static-win32)
+| Windows (MSYS2/MinGW) |  amd64   | [![Windows (MSYS2/MinGW) amd64](https://build.getmonero.org/png?builder=monero-static-win64)](https://build.getmonero.org/builders/monero-static-win64)
 
 ## Coverage
 
@@ -76,9 +45,7 @@ Monero is a private, secure, untraceable, decentralised digital currency. You ar
 
 **Untraceability:** By taking advantage of ring signatures, a special property of a certain type of cryptography, Monero is able to ensure that transactions are not only untraceable, but have an optional measure of ambiguity that ensures that transactions cannot easily be tied back to an individual user or computer.
 
-**Decentralization:** The utility of monero depends on its decentralised peer-to-peer consensus network - anyone should be able to run the monero software, validate the integrity of the blockchain, and participate in all aspects of the monero network using consumer-grade commodity hardware. Decentralization of the monero network is maintained by software development that minimizes the costs of running the monero software and inhibits the proliferation of specialized, non-commodity hardware.  
-
-## About this project
+## About this Project
 
 This is the core implementation of Monero. It is open source and completely free to use without restrictions, except for those specified in the license agreement below. There are no restrictions on anyone creating an alternative implementation of Monero that uses the protocol and network in a compatible manner.
 
@@ -86,23 +53,27 @@ As with many development projects, the repository on Github is considered to be
 
 **Anyone is welcome to contribute to Monero's codebase!** If you have a fix or code change, feel free to submit it as a pull request directly to the "master" branch. In cases where the change is relatively small or does not affect other parts of the codebase it may be merged in immediately by any one of the collaborators. On the other hand, if the change is particularly large or complex, it is expected that it will be discussed at length either well in advance of the pull request being submitted, or even directly on the pull request.
 
-## Supporting the project
+## Supporting the Project
 
-Monero is a 100% community-sponsored endeavor. If you want to join our efforts, the easiest thing you can do is support the project financially. Both Monero and Bitcoin donations can be made to **donate.getmonero.org** if using a client that supports the [OpenAlias](https://openalias.org) standard. Alternatively you can send XMR to the Monero donation address via the `donate` command (type `help` in the command-line wallet for details).
+Monero development can be supported directly through donations.
+
+Both Monero and Bitcoin donations can be made to donate.getmonero.org if using a client that supports the [OpenAlias](https://openalias.org) standard
 
 The Monero donation address is: `44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A` (viewkey: `f359631075708155cc3d92a32b75a7d02a5dcf27756707b47a2b31b21c389501`)
 
 The Bitcoin donation address is: `1KTexdemPdxSBcG55heUuTjDRYqbC5ZL8H`
 
+*Note: you can easily donate XMR to the Monero donation address by using the `donate` command. Type `help` in the command-line wallet for details.*
+
 Core development funding and/or some supporting services are also graciously provided by sponsors:
 
 [<img width="80" src="https://static.getmonero.org/images/sponsors/mymonero.png"/>](https://mymonero.com)
-[<img width="150" src="https://static.getmonero.org/images/sponsors/kitware.png?1"/>](https://kitware.com)
-[<img width="100" src="https://static.getmonero.org/images/sponsors/dome9.png"/>](https://dome9.com)
-[<img width="150" src="https://static.getmonero.org/images/sponsors/araxis.png"/>](https://araxis.com)
-[<img width="150" src="https://static.getmonero.org/images/sponsors/jetbrains.png"/>](https://www.jetbrains.com/)
-[<img width="150" src="https://static.getmonero.org/images/sponsors/navicat.png"/>](https://www.navicat.com/)
-[<img width="150" src="https://static.getmonero.org/images/sponsors/symas.png"/>](https://www.symas.com/)
+[<img width="150" src="https://static.getmonero.org/images/sponsors/kitware.png?1"/>](http://kitware.com)
+[<img width="100" src="https://static.getmonero.org/images/sponsors/dome9.png"/>](http://dome9.com)
+[<img width="150" src="https://static.getmonero.org/images/sponsors/araxis.png"/>](http://araxis.com)
+[<img width="150" src="https://static.getmonero.org/images/sponsors/jetbrains.png"/>](http://www.jetbrains.com/)
+[<img width="150" src="https://static.getmonero.org/images/sponsors/navicat.png"/>](http://www.navicat.com/)
+[<img width="150" src="https://static.getmonero.org/images/sponsors/symas.png"/>](http://www.symas.com/)
 
 There are also several mining pools that kindly donate a portion of their fees, [a list of them can be found on our Bitcointalk post](https://bitcointalk.org/index.php?topic=583449.0).
 
@@ -110,44 +81,63 @@ There are also several mining pools that kindly donate a portion of their fees,
 
 See [LICENSE](LICENSE).
 
-## Contributing
+# Contributing
 
 If you want to help out, see [CONTRIBUTING](CONTRIBUTING.md) for a set of guidelines.
 
-## Scheduled software upgrades
+## Vulnerability Response Process
 
-Monero uses a fixed-schedule software upgrade (hard fork) mechanism to implement new features. This means that users of Monero (end users and service providers) should run current versions and upgrade their software on a regular schedule. Software upgrades occur during the months of April and October. The required software for these upgrades will be available prior to the scheduled date. Please check the repository prior to this date for the proper Monero software version. Below is the historical schedule and the projected schedule for the next upgrade.
-Dates are provided in the format YYYY-MM-DD.
+See [Vulnerability Response Process](VULNERABILITY_RESPONSE_PROCESS.md).
+
+## Monero software updates and consensus protocol changes (hard fork schedule)
+
+Monero uses a fixed-schedule hard fork mechanism to implement new features. This means that users of Monero (end users and service providers) need to run current versions and update their software on a regular schedule. Here is the current schedule, versions, and compatibility.
+Dates are provided in the format YYYY-MM-DD. 
 
 
-| Software upgrade block height  | Date       | Fork version      | Minimum Monero version | Recommended Monero version | Details                                                                            |  
-| ------------------------------ | -----------| ----------------- | ---------------------- | -------------------------- | ---------------------------------------------------------------------------------- |
-| 1009827                        | 2016-03-22 | v2                | v0.9.4                 | v0.9.4                     | Allow only >= ringsize 3, blocktime = 120 seconds, fee-free blocksize 60 kb       |
-| 1141317                        | 2016-09-21 | v3                | v0.9.4                 | v0.10.0                    | Splits coinbase into denominations  |
-| 1220516                        | 2017-01-05 | v4                | v0.10.1                | v0.10.2.1                  | Allow normal and RingCT transactions |
-| 1288616                        | 2017-04-15 | v5                | v0.10.3.0              | v0.10.3.1                  | Adjusted minimum blocksize and fee algorithm      |
-| 1400000                        | 2017-09-16 | v6                | v0.11.0.0              | v0.11.0.0                  | Allow only RingCT transactions, allow only >= ringsize 5      |
-| 1546000                        | 2018-04-06 | v7                | v0.12.0.0              | v0.12.3.0                  | Cryptonight variant 1, ringsize >= 7, sorted inputs
-| 1685555                        | 2018-10-18 | v8                | v0.13.0.0              | v0.13.0.4                  | max transaction size at half the penalty free block size, bulletproofs enabled, cryptonight variant 2, fixed ringsize [11](https://youtu.be/KOO5S4vxi0o)
-| 1686275                        | 2018-10-19 | v9                | v0.13.0.0              | v0.13.0.4                  | bulletproofs required
-| 1788000                        | 2019-03-09 | v10               | v0.14.0.0              | v0.14.1.2                  | New PoW based on Cryptonight-R, new block weight algorithm, slightly more efficient RingCT format
-| 1788720                        | 2019-03-10 | v11               | v0.14.0.0              | v0.14.1.2                  | forbid old RingCT transaction format
-| 1978433                        | 2019-11-30* | v12                | v0.15.0.0              | v0.16.0.3                  | New PoW based on RandomX, only allow >= 2 outputs, change to the block median used to calculate penalty, v1 coinbases are forbidden, rct sigs in coinbase forbidden, 10 block lock time for incoming outputs
-| XXXXXXX                        | XXX-XX-XX | XXX                | vX.XX.X.X              | vX.XX.X.X                  | XXX |
+| Fork Date              | Consensus version | Minimum Monero Version | Recommended Monero Version | Details            |  
+| ----------------- | ----------------- | ---------------------- | -------------------------- | ------------------ |
+| 2016-09-21        | v3                | v0.9.4                 | v0.10.0                    | Splits coinbase into denominations  |
+| 2017-01-05        | v4                | v0.10.1                 | v0.10.2.1                   | Allow normal and RingCT transactions |
+| 2017-04-15        | v5                | v0.10.3.0               | v0.10.3.1                    | Adjusted minimum blocksize and fee algorithm      |
+| 2017-09-21        | v6                | Not determined as of 2017-03-27                | Not determined as of 2017-03-27                    | Allow only RingCT transactions      |
 
-X's indicate that these details have not been determined as of commit date.
+## Installing Monero from a Package
 
-\* indicates estimate as of commit date
+Packages are available for
 
-## Release staging schedule and protocol
+* Ubuntu and [snap supported](https://snapcraft.io/docs/core/install) systems, via a community contributed build.
 
-Approximately three months prior to a scheduled software upgrade, a branch from master will be created with the new release version tag. Pull requests that address bugs should then be made to both master and the new release branch. Pull requests that require extensive review and testing (generally, optimizations and new features) should *not* be made to the release branch.
+    snap install monero --beta
 
-## Compiling Monero from source
+Installing a snap is very quick. Snaps are secure. They are isolated with all of their dependencies. Snaps also auto update when a new version is released.
+
+* Arch Linux (via [AUR](https://aur.archlinux.org/)):
+  - Stable release: [`monero`](https://aur.archlinux.org/packages/monero)
+  - Bleeding edge: [`bitmonero-git`](https://aur.archlinux.org/packages/bitmonero-git)
+
+* OS X via [Homebrew](http://brew.sh)
+
+        brew tap sammy007/cryptonight
+        brew install monero --build-from-source
+
+* Docker
+
+        docker build -t monero .
+     
+        # either run in foreground
+        docker run -it -v /monero/chain:/root/.bitmonero -v /monero/wallet:/wallet -p 18080:18080 monero
+
+        # or in background
+        docker run -it -d -v /monero/chain:/root/.bitmonero -v /monero/wallet:/wallet -p 18080:18080 monero
+
+Packaging for your favorite distribution would be a welcome contribution!
+
+## Compiling Monero from Source
 
 ### Dependencies
 
-The following table summarizes the tools and libraries required to build. A
+The following table summarizes the tools and libraries required to build.  A
 few of the libraries are also included in this repository (marked as
 "Vendored"). By default, the build uses the library installed on the system,
 and ignores the vendored sources. However, if no library is found installed on
@@ -156,84 +146,44 @@ sources are also used for statically-linked builds because distribution
 packages often include only shared library binaries (`.so`) but not static
 library archives (`.a`).
 
-| Dep          | Min. version  | Vendored | Debian/Ubuntu pkg    | Arch pkg     | Void pkg           | Fedora pkg          | Optional | Purpose         |
-| ------------ | ------------- | -------- | -------------------- | ------------ | ------------------ | ------------------- | -------- | --------------- |
-| GCC          | 4.7.3         | NO       | `build-essential`    | `base-devel` | `base-devel`       | `gcc`               | NO       |                 |
-| CMake        | 3.5           | NO       | `cmake`              | `cmake`      | `cmake`            | `cmake`             | NO       |                 |
-| pkg-config   | any           | NO       | `pkg-config`         | `base-devel` | `base-devel`       | `pkgconf`           | NO       |                 |
-| Boost        | 1.58          | NO       | `libboost-all-dev`   | `boost`      | `boost-devel`      | `boost-devel`       | NO       | C++ libraries   |
-| OpenSSL      | basically any | NO       | `libssl-dev`         | `openssl`    | `libressl-devel`   | `openssl-devel`     | NO       | sha256 sum      |
-| libzmq       | 3.0.0         | NO       | `libzmq3-dev`        | `zeromq`     | `zeromq-devel`     | `zeromq-devel`      | NO       | ZeroMQ library  |
-| OpenPGM      | ?             | NO       | `libpgm-dev`         | `libpgm`     |                    | `openpgm-devel`     | NO       | For ZeroMQ      |
-| libnorm[2]   | ?             | NO       | `libnorm-dev`        |              |                    |                     | YES      | For ZeroMQ      |
-| libunbound   | 1.4.16        | YES      | `libunbound-dev`     | `unbound`    | `unbound-devel`    | `unbound-devel`     | NO       | DNS resolver    |
-| libsodium    | ?             | NO       | `libsodium-dev`      | `libsodium`  | `libsodium-devel`  | `libsodium-devel`   | NO       | cryptography    |
-| libunwind    | any           | NO       | `libunwind8-dev`     | `libunwind`  | `libunwind-devel`  | `libunwind-devel`   | YES      | Stack traces    |
-| liblzma      | any           | NO       | `liblzma-dev`        | `xz`         | `liblzma-devel`    | `xz-devel`          | YES      | For libunwind   |
-| libreadline  | 6.3.0         | NO       | `libreadline6-dev`   | `readline`   | `readline-devel`   | `readline-devel`    | YES      | Input editing   |
-| ldns         | 1.6.17        | NO       | `libldns-dev`        | `ldns`       | `libldns-devel`    | `ldns-devel`        | YES      | SSL toolkit     |
-| expat        | 1.1           | NO       | `libexpat1-dev`      | `expat`      | `expat-devel`      | `expat-devel`       | YES      | XML parsing     |
-| GTest        | 1.5           | YES      | `libgtest-dev`[1]    | `gtest`      | `gtest-devel`      | `gtest-devel`       | YES      | Test suite      |
-| Doxygen      | any           | NO       | `doxygen`            | `doxygen`    | `doxygen`          | `doxygen`           | YES      | Documentation   |
-| Graphviz     | any           | NO       | `graphviz`           | `graphviz`   | `graphviz`         | `graphviz`          | YES      | Documentation   |
-| lrelease     | ?             | NO       | `qttools5-dev-tools` | `qt5-tools`  | `qt5-tools`        | `qt5-linguist`      | YES      | Translations    |
-| libhidapi    | ?             | NO       | `libhidapi-dev`      | `hidapi`     | `hidapi-devel`     | `hidapi-devel`      | YES      | Hardware wallet |
-| libusb       | ?             | NO       | `libusb-dev`         | `libusb`     | `libusb-devel`     | `libusb-devel`      | YES      | Hardware wallet |
-| libprotobuf  | ?             | NO       | `libprotobuf-dev`    | `protobuf`   | `protobuf-devel`   | `protobuf-devel`    | YES      | Hardware wallet |
-| protoc       | ?             | NO       | `protobuf-compiler`  | `protobuf`   | `protobuf`         | `protobuf-compiler` | YES      | Hardware wallet |
+| Dep            | Min. Version  | Vendored | Debian/Ubuntu Pkg  | Arch Pkg       | Optional | Purpose        |
+| -------------- | ------------- | ---------| ------------------ | -------------- | -------- | -------------- |
+| GCC            | 4.7.3         | NO       | `build-essential`  | `base-devel`   | NO       |                |
+| CMake          | 3.0.0         | NO       | `cmake`            | `cmake`        | NO       |                |
+| pkg-config     | any           | NO       | `pkg-config`       | `base-devel`   | NO       |                |
+| Boost          | 1.58          | NO       | `libboost-all-dev` | `boost`        | NO       | C++ libraries  |
+| OpenSSL        | basically any | NO       | `libssl-dev`       | `openssl`      | NO       | sha256 sum     |
+| libunbound     | 1.4.16        | YES      | `libunbound-dev`   | `unbound`      | NO       | DNS resolver   |
+| libminiupnpc   | 2.0           | YES      | `libminiupnpc-dev` | `miniupnpc`    | YES      | NAT punching   |
+| libunwind      | any           | NO       | `libunwind8-dev`   | `libunwind`    | YES      | Stack traces   |
+| liblzma        | any           | NO       | `liblzma-dev`      | `xz`           | YES      | For libunwind  |
+| ldns           | 1.6.17        | NO       | `libldns-dev`      | `ldns`         | YES      | SSL toolkit    |
+| expat          | 1.1           | NO       | `libexpat1-dev`    | `expat`        | YES      | XML parsing    |
+| GTest          | 1.5           | YES      | `libgtest-dev`^    | `gtest`        | YES      | Test suite     |
+| Doxygen        | any           | NO       | `doxygen`          | `doxygen`      | YES      | Documentation  |
+| Graphviz       | any           | NO       | `graphviz`         | `graphviz`     | YES      | Documentation  |
 
-
-[1] On Debian/Ubuntu `libgtest-dev` only includes sources and headers. You must
+[^] On Debian/Ubuntu `libgtest-dev` only includes sources and headers. You must
 build the library binary manually. This can be done with the following command ```sudo apt-get install libgtest-dev && cd /usr/src/gtest && sudo cmake . && sudo make && sudo mv libg* /usr/lib/ ```
-[2] libnorm-dev is needed if your zmq library was built with libnorm, and not needed otherwise
-
-Install all dependencies at once on Debian/Ubuntu:
-
-``` sudo apt update && sudo apt install build-essential cmake pkg-config libboost-all-dev libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind8-dev liblzma-dev libreadline6-dev libldns-dev libexpat1-dev doxygen graphviz libpgm-dev qttools5-dev-tools libhidapi-dev libusb-dev libprotobuf-dev protobuf-compiler ```
-
-Install all dependencies at once on macOS with the provided Brewfile:
-``` brew update && brew bundle --file=contrib/brew/Brewfile ```
-
-FreeBSD one liner for required to build dependencies
-```pkg install git gmake cmake pkgconf boost-libs libzmq libsodium```
-
-### Cloning the repository
-
-Clone recursively to pull-in needed submodule(s):
-
-`$ git clone --recursive https://github.com/monero-project/monero`
-
-If you already have a repo cloned, initialize and update:
-
-`$ cd monero && git submodule init && git submodule update`
 
 ### Build instructions
 
 Monero uses the CMake build system and a top-level [Makefile](Makefile) that
 invokes cmake commands as needed.
 
-#### On Linux and macOS
+#### On Linux and OS X
 
 * Install the dependencies
-* Change to the root of the source code directory, change to the most recent release branch, and build:
+* Change to the root of the source code directory and build:
 
-    ```bash
-    cd monero
-    git checkout release-v0.16
-    make
-    ```
+        cd monero
+        make
 
     *Optional*: If your machine has several cores and enough memory, enable
     parallel build by running `make -j<number of threads>` instead of `make`. For
     this to be worthwhile, the machine should have one core and about 2GB of RAM
     available per thread.
 
-    *Note*: The instructions above will compile the most stable release of the
-    Monero software. If you would like to use and test the most recent software,
-    use ```git checkout master```. The master branch may contain updates that are
-    both unstable and incompatible with release software, though testing is always
-    encouraged.
-
 * The resulting executables can be found in `build/release/bin`
 
 * Add `PATH="$PATH:$HOME/monero/build/release/bin"` to `.profile`
@@ -242,66 +192,58 @@ invokes cmake commands as needed.
 
 * **Optional**: build and run the test suite to verify the binaries:
 
-    ```bash
-    make release-test
-    ```
+        make release-test
 
-    *NOTE*: `core_tests` test may take a few hours to complete.
+    *NOTE*: `coretests` test may take a few hours to complete.
 
 * **Optional**: to build binaries suitable for debugging:
 
-    ```bash
-    make debug
-    ```
+         make debug
 
 * **Optional**: to build statically-linked binaries:
 
-    ```bash
-    make release-static
-    ```
-
-Dependencies need to be built with -fPIC. Static libraries usually aren't, so you may have to build them yourself with -fPIC. Refer to their documentation for how to build them.
+         make release-static
 
 * **Optional**: build documentation in `doc/html` (omit `HAVE_DOT=YES` if `graphviz` is not installed):
 
-    ```bash
-    HAVE_DOT=YES doxygen Doxyfile
-    ```
+        HAVE_DOT=YES doxygen Doxyfile
 
-#### On the Raspberry Pi
+#### On the Raspberry Pi 2
 
-Tested on a Raspberry Pi Zero with a clean install of minimal Raspbian Stretch (2017-09-07 or later) from https://www.raspberrypi.org/downloads/raspbian/. If you are using Raspian Jessie, [please see note in the following section](#note-for-raspbian-jessie-users).
+Tested on a Raspberry Pi 2 with a clean install of minimal Debian Jessie from https://www.raspberrypi.org/downloads/raspbian/
 
 * `apt-get update && apt-get upgrade` to install all of the latest software
 
-* Install the dependencies for Monero from the 'Debian' column in the table above.
+* Install the dependencies for Monero except libunwind and libboost-all-dev
 
 * Increase the system swap size:
+```	
+	sudo /etc/init.d/dphys-swapfile stop  
+	sudo nano /etc/dphys-swapfile  
+	CONF_SWAPSIZE=1024  
+	sudo /etc/init.d/dphys-swapfile start  
+```
+* Install the latest version of boost (this may first require invoking `apt-get remove --purge libboost*` to remove a previous version if you're not using a clean install):
+```
+	cd  
+	wget https://sourceforge.net/projects/boost/files/boost/1.64.0/boost_1_64_0.tar.bz2  
+	tar xvfo boost_1_64_0.tar.bz2  
+	cd boost_1_64_0  
+	./bootstrap.sh  
+	sudo ./b2  
+```
+* Wait ~8 hours
+```
+	sudo ./bjam install
+```
+* Wait ~4 hours
 
-    ```bash
-    sudo /etc/init.d/dphys-swapfile stop  
-    sudo nano /etc/dphys-swapfile  
-    CONF_SWAPSIZE=2048
-    sudo /etc/init.d/dphys-swapfile start
-    ```
-
-* If using an external hard disk without an external power supply, ensure it gets enough power to avoid hardware issues when syncing, by adding the line "max_usb_current=1" to /boot/config.txt
-
-* Clone monero and checkout the most recent release version:
-
-    ```bash
-    git clone https://github.com/monero-project/monero.git
-    cd monero
-    git checkout tags/v0.16.0.3
-    ```
-
-* Build:
-
-    ```bash
-    make release
-    ```
-
-* Wait 4-6 hours
+* Change to the root of the source code directory and build:
+```
+        cd monero
+        make release
+```
+* Wait ~4 hours
 
 * The resulting executables can be found in `build/release/bin`
 
@@ -311,291 +253,104 @@ Tested on a Raspberry Pi Zero with a clean install of minimal Raspbian Stretch (
 
 * You may wish to reduce the size of the swap file after the build has finished, and delete the boost directory from your home directory
 
-#### *Note for Raspbian Jessie users:*
-
-If you are using the older Raspbian Jessie image, compiling Monero is a bit more complicated. The version of Boost available in the Debian Jessie repositories is too old to use with Monero, and thus you must compile a newer version yourself. The following explains the extra steps, and has been tested on a Raspberry Pi 2 with a clean install of minimal Raspbian Jessie.
-
-* As before, `apt-get update && apt-get upgrade` to install all of the latest software, and increase the system swap size
-
-    ```bash
-    sudo /etc/init.d/dphys-swapfile stop
-    sudo nano /etc/dphys-swapfile
-    CONF_SWAPSIZE=2048
-    sudo /etc/init.d/dphys-swapfile start
-    ```
-
-
-* Then, install the dependencies for Monero except `libunwind` and `libboost-all-dev`
-
-* Install the latest version of boost (this may first require invoking `apt-get remove --purge libboost*-dev` to remove a previous version if you're not using a clean install):
-
-    ```bash
-    cd
-    wget https://sourceforge.net/projects/boost/files/boost/1.72.0/boost_1_72_0.tar.bz2
-    tar xvfo boost_1_72_0.tar.bz2
-    cd boost_1_72_0
-    ./bootstrap.sh
-    sudo ./b2
-    ```
-
-* Wait ~8 hours
-
-    ```bash    
-    sudo ./bjam cxxflags=-fPIC cflags=-fPIC -a install
-    ```
-
-* Wait ~4 hours
-
-* From here, follow the [general Raspberry Pi instructions](#on-the-raspberry-pi) from the "Clone monero and checkout most recent release version" step.
-
 #### On Windows:
 
 Binaries for Windows are built on Windows using the MinGW toolchain within
-[MSYS2 environment](https://www.msys2.org). The MSYS2 environment emulates a
+[MSYS2 environment](http://msys2.github.io). The MSYS2 environment emulates a
 POSIX system. The toolchain runs within the environment and *cross-compiles*
 binaries that can run outside of the environment as a regular Windows
 application.
 
-**Preparing the build environment**
+**Preparing the Build Environment**
 
-* Download and install the [MSYS2 installer](https://www.msys2.org), either the 64-bit or the 32-bit package, depending on your system.
+* Download and install the [MSYS2 installer](http://msys2.github.io), either the 64-bit or the 32-bit package, depending on your system.
 * Open the MSYS shell via the `MSYS2 Shell` shortcut
 * Update packages using pacman:  
 
-    ```bash
-    pacman -Syu
-    ```
+        pacman -Syuu  
 
 * Exit the MSYS shell using Alt+F4  
 * Edit the properties for the `MSYS2 Shell` shortcut changing "msys2_shell.bat" to "msys2_shell.cmd -mingw64" for 64-bit builds or "msys2_shell.cmd -mingw32" for 32-bit builds
 * Restart MSYS shell via modified shortcut and update packages again using pacman:  
 
-    ```bash
-    pacman -Syu
-    ```
+        pacman -Syuu  
 
 
 * Install dependencies:
 
     To build for 64-bit Windows:
 
-    ```bash
-    pacman -S mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-zeromq mingw-w64-x86_64-libsodium mingw-w64-x86_64-hidapi
-    ```
+        pacman -S mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-boost
 
     To build for 32-bit Windows:
-
-    ```bash
-    pacman -S mingw-w64-i686-toolchain make mingw-w64-i686-cmake mingw-w64-i686-boost mingw-w64-i686-openssl mingw-w64-i686-zeromq mingw-w64-i686-libsodium mingw-w64-i686-hidapi
-    ```
+ 
+        pacman -S mingw-w64-i686-toolchain make mingw-w64-i686-cmake mingw-w64-i686-boost
 
 * Open the MingW shell via `MinGW-w64-Win64 Shell` shortcut on 64-bit Windows
   or `MinGW-w64-Win64 Shell` shortcut on 32-bit Windows. Note that if you are
   running 64-bit Windows, you will have both 64-bit and 32-bit MinGW shells.
 
-**Cloning**
-
-* To git clone, run:
-
-    ```bash
-    git clone --recursive https://github.com/monero-project/monero.git
-    ```
-
 **Building**
 
-* Change to the cloned directory, run:
-
-    ```bash
-    cd monero
-    ```
-
-* If you would like a specific [version/tag](https://github.com/monero-project/monero/tags), do a git checkout for that version. eg. 'v0.16.0.3'. If you don't care about the version and just want binaries from master, skip this step:
-	
-    ```bash
-    git checkout v0.16.0.3
-    ```
-
 * If you are on a 64-bit system, run:
 
-    ```bash
-    make release-static-win64
-    ```
+        make release-static-win64
 
 * If you are on a 32-bit system, run:
 
-    ```bash
-    make release-static-win32
-    ```
+        make release-static-win32
 
 * The resulting executables can be found in `build/release/bin`
 
-* **Optional**: to build Windows binaries suitable for debugging on a 64-bit system, run:
-
-    ```bash
-    make debug-static-win64
-    ```
-
-* **Optional**: to build Windows binaries suitable for debugging on a 32-bit system, run:
-
-    ```bash
-    make debug-static-win32
-    ```
-
-* The resulting executables can be found in `build/debug/bin`
-
 ### On FreeBSD:
 
-The project can be built from scratch by following instructions for Linux above(but use `gmake` instead of `make`). 
-If you are running monero in a jail, you need to add `sysvsem="new"` to your jail configuration, otherwise lmdb will throw the error message: `Failed to open lmdb environment: Function not implemented`.
+The project can be built from scratch by following instructions for Linux above. If you are running monero in a jail you need to add the flag: `allow.sysvipc=1` to your jail configuration, otherwise lmdb will throw the error message: `Failed to open lmdb environment: Function not implemented`.
 
-Monero is also available as a port or package as 'monero-cli`.
+We expect to add Monero into the ports tree in the near future, which will aid in managing installations using ports or packages.
 
 ### On OpenBSD:
 
-You will need to add a few packages to your system. `pkg_add cmake gmake zeromq libiconv boost`.
+This has been tested on OpenBSD 5.8.
 
-The `doxygen` and `graphviz` packages are optional and require the xbase set.
-Running the test suite also requires `py-requests` package.
+You will need to add a few packages to your system. `pkg_add db cmake gcc gcc-libs g++ miniupnpc gtest`.
 
-Build monero: `env DEVELOPER_LOCAL_TOOLS=1 BOOST_ROOT=/usr/local gmake release-static`
+The doxygen and graphviz packages are optional and require the xbase set.
 
-Note: you may encounter the following error, when compiling the latest version of monero as a normal user:
+The Boost package has a bug that will prevent librpc.a from building correctly. In order to fix this, you will have to Build boost yourself from scratch. Follow the directions here (under "Building Boost"):
+https://github.com/bitcoin/bitcoin/blob/master/doc/build-openbsd.md
 
-```
-LLVM ERROR: out of memory
-c++: error: unable to execute command: Abort trap (core dumped)
-```
+You will have to add the serialization, date_time, and regex modules to Boost when building as they are needed by Monero.
 
-Then you need to increase the data ulimit size to 2GB and try again: `ulimit -d 2000000`
-
-### On Solaris:
-
-The default Solaris linker can't be used, you have to install GNU ld, then run cmake manually with the path to your copy of GNU ld:
-
-```bash
-mkdir -p build/release
-cd build/release
-cmake -DCMAKE_LINKER=/path/to/ld -D CMAKE_BUILD_TYPE=Release ../..
-cd ../..
-```
-
-Then you can run make as usual.
+To build: `env CC=egcc CXX=eg++ CPP=ecpp DEVELOPER_LOCAL_TOOLS=1 BOOST_ROOT=/path/to/the/boost/you/built make release-static-64`
 
 ### On Linux for Android (using docker):
 
-```bash
-# Build image (for ARM 32-bit)
-docker build -f utils/build_scripts/android32.Dockerfile -t monero-android .
-# Build image (for ARM 64-bit)
-docker build -f utils/build_scripts/android64.Dockerfile -t monero-android .
-# Create container
-docker create -it --name monero-android monero-android bash
-# Get binaries
-docker cp monero-android:/src/build/release/bin .
-```
+        # Build image (select android64.Dockerfile for aarch64)
+        cd utils/build_scripts/ && docker build -f android32.Dockerfile -t monero-android .
+        # Create container
+        docker create -it --name monero-android monero-android bash
+        # Get binaries
+        docker cp monero-android:/opt/android/monero/build/release/bin .
 
-### Building portable statically linked binaries
+### Building Portable Statically Linked Binaries
 
 By default, in either dynamically or statically linked builds, binaries target the specific host processor on which the build happens and are not portable to other processors. Portable binaries can be built using the following targets:
 
-* ```make release-static-linux-x86_64``` builds binaries on Linux on x86_64 portable across POSIX systems on x86_64 processors
-* ```make release-static-linux-i686``` builds binaries on Linux on x86_64 or i686 portable across POSIX systems on i686 processors
-* ```make release-static-linux-armv8``` builds binaries on Linux portable across POSIX systems on armv8 processors
-* ```make release-static-linux-armv7``` builds binaries on Linux portable across POSIX systems on armv7 processors
-* ```make release-static-linux-armv6``` builds binaries on Linux portable across POSIX systems on armv6 processors
+* ```make release-static-64``` builds binaries on Linux on x86_64 portable across POSIX systems on x86_64 processors
+* ```make release-static-32``` builds binaries on Linux on x86_64 or i686 portable across POSIX systems on i686 processors
+* ```make release-static-armv8``` builds binaries on Linux portable across POSIX systems on armv8 processors
+* ```make release-static-armv7``` builds binaries on Linux portable across POSIX systems on armv7 processors
+* ```make release-static-armv6``` builds binaries on Linux portable across POSIX systems on armv6 processors
 * ```make release-static-win64``` builds binaries on 64-bit Windows portable across 64-bit Windows systems
 * ```make release-static-win32``` builds binaries on 64-bit or 32-bit Windows portable across 32-bit Windows systems
 
-### Cross Compiling
-
-You can also cross-compile static binaries on Linux for Windows and macOS with the `depends` system.
-
-* ```make depends target=x86_64-linux-gnu``` for 64-bit linux binaries.
-* ```make depends target=x86_64-w64-mingw32``` for 64-bit windows binaries.
-  * Requires: `python3 g++-mingw-w64-x86-64 wine1.6 bc`
-* ```make depends target=x86_64-apple-darwin11``` for macOS binaries.
-  * Requires: `cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev`
-* ```make depends target=i686-linux-gnu``` for 32-bit linux binaries.
-  * Requires: `g++-multilib bc`
-* ```make depends target=i686-w64-mingw32``` for 32-bit windows binaries.
-  * Requires: `python3 g++-mingw-w64-i686`
-* ```make depends target=arm-linux-gnueabihf``` for armv7 binaries.
-  * Requires: `g++-arm-linux-gnueabihf`
-* ```make depends target=aarch64-linux-gnu``` for armv8 binaries.
-  * Requires: `g++-aarch64-linux-gnu`
-* ```make depends target=riscv64-linux-gnu``` for RISC V 64 bit binaries.
-  * Requires: `g++-riscv64-linux-gnu`
-* ```make depends target=x86_64-unknown-freebsd``` for freebsd binaries.
-  * Requires: `clang-8`
-* ```make depends target=arm-linux-android``` for 32bit android binaries
-* ```make depends target=aarch64-linux-android``` for 64bit android binaries
-
-
-The required packages are the names for each toolchain on apt. Depending on your distro, they may have different names.
-
-Using `depends` might also be easier to compile Monero on Windows than using MSYS. Activate Windows Subsystem for Linux (WSL) with a distro (for example Ubuntu), install the apt build-essentials and follow the `depends` steps as depicted above.
-
-The produced binaries still link libc dynamically. If the binary is compiled on a current distribution, it might not run on an older distribution with an older installation of libc. Passing `-DBACKCOMPAT=ON` to cmake will make sure that the binary will run on systems having at least libc version 2.17.
-
-## Installing Monero from a package
-
-**DISCLAIMER: These packages are not part of this repository or maintained by this project's contributors, and as such, do not go through the same review process to ensure their trustworthiness and security.**
-
-Packages are available for
-
-* Debian Bullseye and Sid
-
-    ```bash
-    sudo apt install monero
-    ```
-More info and versions in the [Debian package tracker](https://tracker.debian.org/pkg/monero).
-
-* Arch Linux (via [AUR](https://aur.archlinux.org/)):
-  - Stable release: [`monero`](https://aur.archlinux.org/packages/monero)
-  - Bleeding edge: [`monero-git`](https://aur.archlinux.org/packages/monero-git)
-
-* Void Linux:
-
-    ```bash
-    xbps-install -S monero
-    ```
-
-* GuixSD
-
-    ```bash
-    guix package -i monero
-    ```
-
-* Docker
-
-    ```bash
-    # Build using all available cores
-    docker build -t monero .
-    
-    # or build using a specific number of cores (reduce RAM requirement)
-    docker build --build-arg NPROC=1 -t monero .
-    
-    # either run in foreground
-    docker run -it -v /monero/chain:/root/.bitmonero -v /monero/wallet:/wallet -p 18080:18080 monero
-    
-    # or in background
-    docker run -it -d -v /monero/chain:/root/.bitmonero -v /monero/wallet:/wallet -p 18080:18080 monero
-    ```
-
-* The build needs 3 GB space.
-* Wait one  hour or more
-
-Packaging for your favorite distribution would be a welcome contribution!
-
 ## Running monerod
 
 The build places the binary in `bin/` sub-directory within the build directory
 from which cmake was invoked (repository root by default). To run in
 foreground:
 
-```bash
-./bin/monerod
-```
+    ./bin/monerod
 
 To list all available options, run `./bin/monerod --help`.  Options can be
 specified either on the command line or in a configuration file passed by the
@@ -605,9 +360,7 @@ of the argument without the leading dashes, for example `log-level=1`.
 
 To run in background:
 
-```bash
-./bin/monerod --log-file monerod.log --detach
-```
+    ./bin/monerod --log-file monerod.log --detach
 
 To run as a systemd service, copy
 [monerod.service](utils/systemd/monerod.service) to `/etc/systemd/system/` and
@@ -625,68 +378,46 @@ See [README.i18n.md](README.i18n.md).
 
 ## Using Tor
 
-> There is a new, still experimental, [integration with Tor](ANONYMITY_NETWORKS.md). The
-> feature allows connecting over IPv4 and Tor simulatenously - IPv4 is used for
-> relaying blocks and relaying transactions received by peers whereas Tor is
-> used solely for relaying transactions received over local RPC. This provides
-> privacy and better protection against surrounding node (sybil) attacks.
+While Monero isn't made to integrate with Tor, it can be used wrapped with torsocks, if you add --p2p-bind-ip 127.0.0.1 to the monerod command line. You also want to set DNS requests to go over TCP, so they'll be routed through Tor, by setting DNS_PUBLIC=tcp. You may also disable IGD (UPnP port forwarding negotiation), which is pointless with Tor. To allow local connections from the wallet, you might have to add TORSOCKS_ALLOW_INBOUND=1, some OSes need it and some don't. Example:
 
-While Monero isn't made to integrate with Tor, it can be used wrapped with torsocks, by
-setting the following configuration parameters and environment variables:
+`DNS_PUBLIC=tcp torsocks monerod --p2p-bind-ip 127.0.0.1 --no-igd`
 
-* `--p2p-bind-ip 127.0.0.1` on the command line or `p2p-bind-ip=127.0.0.1` in
-  monerod.conf to disable listening for connections on external interfaces.
-* `--no-igd` on the command line or `no-igd=1` in monerod.conf to disable IGD
-  (UPnP port forwarding negotiation), which is pointless with Tor.
-* `DNS_PUBLIC=tcp` or `DNS_PUBLIC=tcp://x.x.x.x` where x.x.x.x is the IP of the
-  desired DNS server, for DNS requests to go over TCP, so that they are routed
-  through Tor. When IP is not specified, monerod uses the default list of
-  servers defined in [src/common/dns_utils.cpp](src/common/dns_utils.cpp).
-* `TORSOCKS_ALLOW_INBOUND=1` to tell torsocks to allow monerod to bind to interfaces
-   to accept connections from the wallet. On some Linux systems, torsocks
-   allows binding to localhost by default, so setting this variable is only
-   necessary to allow binding to local LAN/VPN interfaces to allow wallets to
-   connect from remote hosts. On other systems, it may be needed for local wallets
-   as well.
-* Do NOT pass `--detach` when running through torsocks with systemd, (see
-  [utils/systemd/monerod.service](utils/systemd/monerod.service) for details).
-* If you use the wallet with a Tor daemon via the loopback IP (eg, 127.0.0.1:9050),
-  then use `--untrusted-daemon` unless it is your own hidden service.
+or:
 
-Example command line to start monerod through Tor:
+`DNS_PUBLIC=tcp TORSOCKS_ALLOW_INBOUND=1 torsocks monerod --p2p-bind-ip 127.0.0.1 --no-igd`
 
-```bash
-DNS_PUBLIC=tcp torsocks monerod --p2p-bind-ip 127.0.0.1 --no-igd
-```
+TAILS ships with a very restrictive set of firewall rules. Therefore, you need to add a rule to allow this connection too, in addition to telling torsocks to allow inbound connections. Full example:
 
-### Using Tor on Tails
+`sudo iptables -I OUTPUT 2 -p tcp -d 127.0.0.1 -m tcp --dport 18081 -j ACCEPT`
 
-TAILS ships with a very restrictive set of firewall rules. Therefore, you need
-to add a rule to allow this connection too, in addition to telling torsocks to
-allow inbound connections. Full example:
+`DNS_PUBLIC=tcp torsocks ./monerod --p2p-bind-ip 127.0.0.1 --no-igd --rpc-bind-ip 127.0.0.1 --data-dir /home/amnesia/Persistent/your/directory/to/the/blockchain`
 
-```bash
-sudo iptables -I OUTPUT 2 -p tcp -d 127.0.0.1 -m tcp --dport 18081 -j ACCEPT
-DNS_PUBLIC=tcp torsocks ./monerod --p2p-bind-ip 127.0.0.1 --no-igd --rpc-bind-ip 127.0.0.1 \
-    --data-dir /home/amnesia/Persistent/your/directory/to/the/blockchain
-```
+`./monero-wallet-cli`
 
-## Debugging
+## Using readline
 
-This section contains general instructions for debugging failed installs or problems encountered with Monero. First, ensure you are running the latest version built from the Github repo.
+While monerod and monero-wallet-cli do not use readline directly, most of the functionality can be obtained by running them via rlwrap. This allows command recall, edit capabilities, etc. It does not give autocompletion without an extra completion file, however. To use rlwrap, simply prepend `rlwrap` to the command line, eg:
 
-### Obtaining stack traces and core dumps on Unix systems
+`rlwrap bin/monero-wallet-cli --wallet-file /path/to/wallet`
+
+Note: rlwrap will save things like your seed and private keys, if you supply them on prompt. You may want to not use rlwrap when you use simplewallet to restore from seed, etc.
+
+# Debugging
+
+This section contains general instructions for debugging failed installs or problems encountered with Monero. First ensure you are running the latest version built from the github repo.
+
+## Obtaining Stack Traces and Core Dumps on Unix Systems
 
 We generally use the tool `gdb` (GNU debugger) to provide stack trace functionality, and `ulimit` to provide core dumps in builds which crash or segfault.
 
-* To use `gdb` in order to obtain a stack trace for a build that has stalled:
+* To use gdb in order to obtain a stack trace for a build that has stalled:
 
 Run the build.
 
 Once it stalls, enter the following command:
 
-```bash
-gdb /path/to/monerod `pidof monerod`
+```
+gdb /path/to/monerod `pidof monerod` 
 ```
 
 Type `thread apply all bt` within gdb in order to obtain the stack trace
@@ -695,27 +426,17 @@ Type `thread apply all bt` within gdb in order to obtain the stack trace
 
 Enter `ulimit -c unlimited` on the command line to enable unlimited filesizes for core dumps
 
-Enter `echo core | sudo tee /proc/sys/kernel/core_pattern` to stop cores from being hijacked by other tools
-
 Run the build.
 
-When it terminates with an output along the lines of "Segmentation fault (core dumped)", there should be a core dump file in the same directory as monerod. It may be named just `core`, or `core.xxxx` with numbers appended.
+When it terminates with an output along the lines of "Segmentation fault (core dumped)", there should be a core dump file in the same directory as monerod.
 
 You can now analyse this core dump with `gdb` as follows:
 
-```bash
-gdb /path/to/monerod /path/to/dumpfile`
-```
+`gdb /path/to/monerod /path/to/dumpfile`
 
 Print the stack trace with `bt`
 
- * If a program crashed and cores are managed by systemd, the following can also get a stack trace for that crash:
-
-```bash
-coredumpctl -1 gdb
-```
-
-#### To run monero within gdb:
+* To run monero within gdb:
 
 Type `gdb /path/to/monerod`
 
@@ -723,53 +444,22 @@ Pass command-line options with `--args` followed by the relevant arguments
 
 Type `run` to run monerod
 
-### Analysing memory corruption
+## Analysing Memory Corruption
 
-There are two tools available:
+We use the tool `valgrind` for this.
 
-#### ASAN
+Run with `valgrind /path/to/monerod`. It will be slow.
 
-Configure Monero with the -D SANITIZE=ON cmake flag, eg:
-
-```bash
-cd build/debug && cmake -D SANITIZE=ON -D CMAKE_BUILD_TYPE=Debug ../..
-```
-
-You can then run the monero tools normally. Performance will typically halve.
-
-#### valgrind
-
-Install valgrind and run as `valgrind /path/to/monerod`. It will be very slow.
-
-### LMDB
+## LMDB
 
 Instructions for debugging suspected blockchain corruption as per @HYC
 
 There is an `mdb_stat` command in the LMDB source that can print statistics about the database but it's not routinely built. This can be built with the following command:
 
-```bash
-cd ~/monero/external/db_drivers/liblmdb && make
-```
+`cd ~/monero/external/db_drivers/liblmdb && make`
 
 The output of `mdb_stat -ea <path to blockchain dir>` will indicate inconsistencies in the blocks, block_heights and block_info table.
 
 The output of `mdb_dump -s blocks <path to blockchain dir>` and `mdb_dump -s block_info <path to blockchain dir>` is useful for indicating whether blocks and block_info contain the same keys.
 
 These records are dumped as hex data, where the first line is the key and the second line is the data.
-
-# Known Issues
-
-## Protocols
-
-### Socket-based
-
-Because of the nature of the socket-based protocols that drive monero, certain protocol weaknesses are somewhat unavoidable at this time. While these weaknesses can theoretically be fully mitigated, the effort required (the means) may not justify the ends. As such, please consider taking the following precautions if you are a monero node operator:
-
-- Run `monerod` on a "secured" machine. If operational security is not your forte, at a very minimum, have a dedicated a computer running `monerod` and **do not** browse the web, use email clients, or use any other potentially harmful apps on your `monerod` machine. **Do not click links or load URL/MUA content on the same machine**. Doing so may potentially exploit weaknesses in commands which accept "localhost" and "127.0.0.1".
-- If you plan on hosting a public "remote" node, start `monerod` with `--restricted-rpc`. This is a must.
-
-### Blockchain-based
-
-Certain blockchain "features" can be considered "bugs" if misused correctly. Consequently, please consider the following:
-
-- When receiving monero, be aware that it may be locked for an arbitrary time if the sender elected to, preventing you from spending that monero until the lock time expires. You may want to hold off acting upon such a transaction until the unlock time lapses. To get a sense of that time, you can consider the remaining blocktime until unlock as seen in the `show_transfers` command.

VULNERABILITY_RESPONSE_PROCESS.md

@@ -0,0 +1,143 @@
+# Monero Vulnerability Response Process
+
+## Preamble
+
+Researchers/Hackers: while you research/hack, we ask that you please refrain from committing the following:
+- Denial of Service / Active exploiting against the network
+- Social Engineering of Monero staff or contractors
+- Any physical or electronic attempts against Monero community property and/or data centers
+
+## I. Point of Contacts for Security Issues
+
+```
+ric@getmonero.org
+BDA6 BD70 42B7 21C4 67A9  759D 7455 C5E3 C0CD CEB9
+
+luigi1111@getmonero.org
+8777 AB8F 778E E894 87A2  F8E7 F4AC A018 3641 E010
+
+moneromooo.monero@gmail.com
+48B0 8161 FBDA DFE3 93AD  FC3E 686F 0745 4D6C EFC3
+```
+
+## II. Security Response Team
+
+- fluffypony
+- luigi1111
+- moneromooo
+
+## III. Incident Response
+
+1. Researcher submits report via one or both of two methods:
+    - a. Email
+    - b. [HackerOne](https://hackerone.com/monero)
+
+2. Response Team designates a Response Manager who is in charge of the particular report based on availability and/or knowledge-set
+
+3. In no more than 3 working days, Response Team should gratefully respond to researcher using only encrypted, secure channels
+
+4. Response Manager makes inquiries to satisfy any needed information to confirm if submission is indeed a vulnerability
+    - a. If submission proves to be vulnerable, proceed to next step
+    - b. If not vulnerable:
+      - i. Response Manager responds with reasons why submission is not a vulnerability
+      - ii. Response Manager moves discussion to a new or existing ticket on GitHub if necessary
+
+5. If over email, Response Manager opens a HackerOne issue for new submission
+
+6. Establish severity of vulnerability:
+    - a. HIGH: impacts network as a whole, has potential to break entire network, results in the loss of monero, or is on a scale of great catastrophe
+    - b. MEDIUM: impacts individual nodes, wallets, or must be carefully exploited
+    - c. LOW: is not easily exploitable
+
+7. Respond according to the severity of the vulnerability:
+    - a. HIGH severities must be notified on website and reddit /r/Monero within 3 working days of classification
+      - i. The notification should list appropriate steps for users to take, if any
+      - ii. The notification must not include any details that could suggest an exploitation path
+      - iii. The latter takes precedence over the former
+    - b. MEDIUM and HIGH severities will require a Point Release
+    - c. LOW severities will be addressed in the next Regular Release
+
+8. Response Team applies appropriate patch(es)
+    - a. Response Manager designates a PRIVATE git "hotfix branch" to work in
+    - b. Patches are reviewed with the researcher
+    - c. Any messages associated with PUBLIC commits during the time of review should not make reference to the security nature of the PRIVATE branch or its commits
+    - d. Vulnerability announcement is drafted
+      - i. Include the severity of the vulnerability
+      - ii. Include all vulnerable systems/apps/code
+      - iii. Include solutions (if any) if patch cannot be applied
+    - e. Release date is discussed
+
+9. At release date, Response Team coordinates with developers to finalize update:
+    - a. Response Manager propagates the "hotfix branch" to trunk
+    - b. Response Manager includes vulnerability announcement draft in release notes
+    - c. Proceed with the Point or Regular Release
+
+## IV. Post-release Disclosure Process
+
+1. Response Team has 90 days to fulfill all points within section III
+
+2. If the Incident Response process in section III is successfully completed:
+    - a. Response Manager contacts researcher and asks if researcher wishes for credit
+    - b. Finalize vulnerability announcement draft and include the following:
+      - i. Project name and URL
+      - ii. Versions known to be affected
+      - iii. Versions known to be not affected (for example, the vulnerable code was introduced in a recent version, and older versions are therefore unaffected)
+      - iv. Versions not checked
+      - v. Type of vulnerability and its impact
+      - vi. If already obtained or applicable, a CVE-ID
+      - vii. The planned, coordinated release date
+      - viii. Mitigating factors (for example, the vulnerability is only exposed in uncommon, non-default configurations)
+      - ix. Workarounds (configuration changes users can make to reduce their exposure to the vulnerability)
+      - x. If applicable, credits to the original reporter
+    - c. Release finalized vulnerability announcement on website and reddit /r/Monero
+    - d. For HIGH severities, release finalized vulnerability announcement on well-known mailing lists:
+      - i. oss-security@lists.openwall.com
+      - ii. bugtraq@securityfocus.com
+    - e. If applicable, developers request a CVE-ID
+      - i. The commit that applied the fix is made reference too in a future commit and includes a CVE-ID
+
+3. If the Incident Response process in section III is *not* successfully completed:
+    - a. Response Team and developers organize an IRC meeting to discuss why/what points in section III were not resolved and how the team can resolve them in the future
+    - b. Any developer meetings immediately following the incident should include points made in section V
+    - c. If disputes arise about whether or when to disclose information about a vulnerability, the Response Team will publicly discuss the issue via IRC and attempt to reach consensus
+    - d. If consensus on a timely disclosure is not met (no later than 90 days), the researcher (after 90 days) has every right to expose the vulnerability to the public
+
+## V. Incident Analysis
+
+1. Isolate codebase
+    - a. Response Team and developers should coordinate to work on the following:
+      - i. Problematic implementation of classes/libraries/functions, etc.
+      - ii. Focus on apps/distro packaging, etc.
+      - iii. Operator/config error, etc.
+
+2. Auditing
+    - a. Response Team and developers should coordinate to work on the following:
+      - i. Auditing of problem area(s) as discussed in point 1
+      - ii. Generate internal reports and store for future reference
+      - iii. If results are not sensitive, share with the public via IRC or GitHub
+
+3. Response Team has 45 days following completion of section III to ensure completion of section V
+
+## VI. Resolutions
+
+Any further questions or resolutions regarding the incident(s) between the researcher and response + development team after public disclosure can be addressed via the following:
+
+- [GitHub](https://github.com/monero-project/monero/issues/)
+- [HackerOne](https://hackerone.com/monero)
+- [Reddit /r/Monero](https://reddit.com/r/Monero/)
+- IRC
+- Email
+
+## VII. Continuous Improvement
+
+1. Response Team and developers should hold annual meetings to review the previous year's incidents
+
+2. Response Team or designated person(s) should give a brief presentation, including:
+    - a. Areas of Monero affected by the incidents
+    - b. Any network downtime or monetary cost (if any) of the incidents
+    - c. Ways in which the incidents could have been avoided (if any)
+    - d. How effective this process was in dealing with the incidents
+
+3. After the presentation, Response Team and developers should discuss:
+    - a. Potential changes to development processes to reduce future incidents
+    - b. Potential changes to this process to improve future responses

cmake/32-bit-toolchain.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2019, The Monero Project
+# Copyright (c) 2014-2017, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,9 +26,7 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-if (NOT CMAKE_HOST_WIN32)
-  set (CMAKE_SYSTEM_NAME Windows)
-endif()
+set (CMAKE_SYSTEM_NAME Windows)
 
 set (GCC_PREFIX i686-w64-mingw32)
 set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc)

cmake/64-bit-toolchain.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2019, The Monero Project
+# Copyright (c) 2014-2017, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,9 +26,7 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-if (NOT CMAKE_HOST_WIN32)
-  set (CMAKE_SYSTEM_NAME Windows)
-endif()
+set (CMAKE_SYSTEM_NAME Windows)
 
 set (GCC_PREFIX x86_64-w64-mingw32)
 set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc)

cmake/CheckLinkerFlag.c

@@ -1,14 +0,0 @@
-#ifdef __CLASSIC_C__
-int main()
-{
-  int ac;
-  char* av[];
-#else
-int main(int ac, char* av[])
-{
-#endif
-  if (ac > 1000) {
-    return *av[0];
-  }
-  return 0;
-}

cmake/CheckLinkerFlag.cmake

@@ -1,47 +0,0 @@
-include(CheckCCompilerFlag)
-
-macro(CHECK_LINKER_FLAG flag VARIABLE)
-  if(NOT DEFINED "${VARIABLE}")
-    if(NOT CMAKE_REQUIRED_QUIET)
-      message(STATUS "Looking for ${flag} linker flag")
-    endif()
-
-    set(_cle_source ${CMAKE_SOURCE_DIR}/cmake/CheckLinkerFlag.c)
-
-    set(saved_CMAKE_C_FLAGS ${CMAKE_C_FLAGS})
-    set(CMAKE_C_FLAGS "${flag}")
-    try_compile(${VARIABLE}
-      ${CMAKE_BINARY_DIR}
-      ${_cle_source}
-      COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} ${flag}
-      CMAKE_FLAGS
-      OUTPUT_VARIABLE OUTPUT)
-    unset(_cle_source)
-    set(CMAKE_C_FLAGS ${saved_CMAKE_C_FLAGS})
-    unset(saved_CMAKE_C_FLAGS)
-
-    if ("${OUTPUT}" MATCHES "warning.*ignored")
-      set(${VARIABLE} 0)
-    endif()
-
-    if(${VARIABLE})
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${flag} linker flag - found")
-      endif()
-      set(${VARIABLE} 1 CACHE INTERNAL "Have linker flag ${flag}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
-        "Determining if the ${flag} linker flag is supported "
-        "passed with the following output:\n"
-        "${OUTPUT}\n\n")
-    else()
-      if(NOT CMAKE_REQUIRED_QUIET)
-        message(STATUS "Looking for ${flag} linker flag - not found")
-      endif()
-      set(${VARIABLE} "" CACHE INTERNAL "Have linker flag ${flag}")
-      file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the ${flag} linker flag is supported "
-        "failed with the following output:\n"
-        "${OUTPUT}\n\n")
-    endif()
-  endif()
-endmacro()

cmake/CheckTrezor.cmake

@@ -1,181 +0,0 @@
-OPTION(USE_DEVICE_TREZOR "Trezor support compilation" ON)
-OPTION(USE_DEVICE_TREZOR_LIBUSB "Trezor LibUSB compilation" ON)
-OPTION(USE_DEVICE_TREZOR_UDP_RELEASE "Trezor UdpTransport in release mode" OFF)
-OPTION(USE_DEVICE_TREZOR_DEBUG "Trezor Debugging enabled" OFF)
-OPTION(TREZOR_DEBUG "Main trezor debugging switch" OFF)
-
-# Helper function to fix cmake < 3.6.0 FindProtobuf variables
-function(_trezor_protobuf_fix_vars)
-    if(${CMAKE_VERSION} VERSION_LESS "3.6.0")
-        foreach(UPPER
-                PROTOBUF_SRC_ROOT_FOLDER
-                PROTOBUF_IMPORT_DIRS
-                PROTOBUF_DEBUG
-                PROTOBUF_LIBRARY
-                PROTOBUF_PROTOC_LIBRARY
-                PROTOBUF_INCLUDE_DIR
-                PROTOBUF_PROTOC_EXECUTABLE
-                PROTOBUF_LIBRARY_DEBUG
-                PROTOBUF_PROTOC_LIBRARY_DEBUG
-                PROTOBUF_LITE_LIBRARY
-                PROTOBUF_LITE_LIBRARY_DEBUG
-                )
-            if (DEFINED ${UPPER})
-                string(REPLACE "PROTOBUF_" "Protobuf_" Camel ${UPPER})
-                if (NOT DEFINED ${Camel})
-                    set(${Camel} ${${UPPER}} PARENT_SCOPE)
-                endif()
-            endif()
-        endforeach()
-    endif()
-endfunction()
-
-# Use Trezor master switch
-if (USE_DEVICE_TREZOR)
-    # Protobuf is required to build protobuf messages for Trezor
-    include(FindProtobuf OPTIONAL)
-    find_package(Protobuf)
-    _trezor_protobuf_fix_vars()
-
-    # Protobuf handling the cache variables set in docker.
-    if(NOT Protobuf_FOUND AND NOT Protobuf_LIBRARY AND NOT Protobuf_PROTOC_EXECUTABLE AND NOT Protobuf_INCLUDE_DIR)
-        message(STATUS "Could not find Protobuf")
-    elseif(NOT Protobuf_LIBRARY OR NOT EXISTS "${Protobuf_LIBRARY}")
-        message(STATUS "Protobuf library not found: ${Protobuf_LIBRARY}")
-        unset(Protobuf_FOUND)
-    elseif(NOT Protobuf_PROTOC_EXECUTABLE OR NOT EXISTS "${Protobuf_PROTOC_EXECUTABLE}")
-        message(STATUS "Protobuf executable not found: ${Protobuf_PROTOC_EXECUTABLE}")
-        unset(Protobuf_FOUND)
-    elseif(NOT Protobuf_INCLUDE_DIR OR NOT EXISTS "${Protobuf_INCLUDE_DIR}")
-        message(STATUS "Protobuf include dir not found: ${Protobuf_INCLUDE_DIR}")
-        unset(Protobuf_FOUND)
-    else()
-        message(STATUS "Protobuf lib: ${Protobuf_LIBRARY}, inc: ${Protobuf_INCLUDE_DIR}, protoc: ${Protobuf_PROTOC_EXECUTABLE}")
-        set(Protobuf_INCLUDE_DIRS ${Protobuf_INCLUDE_DIR})
-        set(Protobuf_FOUND 1)  # override found if all rquired info was provided by variables
-    endif()
-
-    if(TREZOR_DEBUG)
-        set(USE_DEVICE_TREZOR_DEBUG 1)
-    endif()
-
-    # Compile debugging support (for tests)
-    if (USE_DEVICE_TREZOR_DEBUG)
-        add_definitions(-DWITH_TREZOR_DEBUGGING=1)
-    endif()
-else()
-    message(STATUS "Trezor support disabled by USE_DEVICE_TREZOR")
-endif()
-
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR)
-    if (NOT "$ENV{TREZOR_PYTHON}" STREQUAL "")
-        set(TREZOR_PYTHON "$ENV{TREZOR_PYTHON}" CACHE INTERNAL "Copied from environment variable TREZOR_PYTHON")
-    else()
-        find_package(Python QUIET COMPONENTS Interpreter)  # cmake 3.12+
-        if(Python_Interpreter_FOUND)
-            set(TREZOR_PYTHON "${Python_EXECUTABLE}")
-        endif()
-    endif()
-
-    if(NOT TREZOR_PYTHON)
-        find_package(PythonInterp)
-        if(PYTHONINTERP_FOUND AND PYTHON_EXECUTABLE)
-            set(TREZOR_PYTHON "${PYTHON_EXECUTABLE}")
-        endif()
-    endif()
-
-    if(NOT TREZOR_PYTHON)
-        message(STATUS "Trezor: Python not found")
-    endif()
-endif()
-
-# Protobuf compilation test
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON)
-    execute_process(COMMAND ${Protobuf_PROTOC_EXECUTABLE} -I "${CMAKE_SOURCE_DIR}/cmake" -I "${Protobuf_INCLUDE_DIR}" "${CMAKE_SOURCE_DIR}/cmake/test-protobuf.proto" --cpp_out ${CMAKE_BINARY_DIR} RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR)
-    if(RET)
-        message(STATUS "Protobuf test generation failed: ${OUT} ${ERR}")
-    endif()
-
-    try_compile(Protobuf_COMPILE_TEST_PASSED
-        "${CMAKE_BINARY_DIR}"
-        SOURCES
-        "${CMAKE_BINARY_DIR}/test-protobuf.pb.cc"
-        "${CMAKE_SOURCE_DIR}/cmake/test-protobuf.cpp"
-        CMAKE_FLAGS
-        "-DINCLUDE_DIRECTORIES=${Protobuf_INCLUDE_DIR};${CMAKE_BINARY_DIR}"
-        "-DCMAKE_CXX_STANDARD=11"
-        LINK_LIBRARIES ${Protobuf_LIBRARY}
-        OUTPUT_VARIABLE OUTPUT
-    )
-    if(NOT Protobuf_COMPILE_TEST_PASSED)
-        message(STATUS "Protobuf Compilation test failed: ${OUTPUT}.")
-    endif()
-endif()
-
-# Try to build protobuf messages
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON AND Protobuf_COMPILE_TEST_PASSED)
-    set(ENV{PROTOBUF_INCLUDE_DIRS} "${Protobuf_INCLUDE_DIR}")
-    set(ENV{PROTOBUF_PROTOC_EXECUTABLE} "${Protobuf_PROTOC_EXECUTABLE}")
-    set(TREZOR_PROTOBUF_PARAMS "")
-    if (USE_DEVICE_TREZOR_DEBUG)
-        set(TREZOR_PROTOBUF_PARAMS "--debug")
-    endif()
-    
-    execute_process(COMMAND ${TREZOR_PYTHON} tools/build_protob.py ${TREZOR_PROTOBUF_PARAMS} WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/../src/device_trezor/trezor RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR)
-    if(RET)
-        message(WARNING "Trezor protobuf messages could not be regenerated (err=${RET}, python ${PYTHON})."
-                "OUT: ${OUT}, ERR: ${ERR}."
-                "Please read src/device_trezor/trezor/tools/README.md")
-    else()
-        message(STATUS "Trezor protobuf messages regenerated out: \"${OUT}.\"")
-        set(DEVICE_TREZOR_READY 1)
-        add_definitions(-DDEVICE_TREZOR_READY=1)
-        add_definitions(-DPROTOBUF_INLINE_NOT_IN_HEADERS=0)
-
-        if(CMAKE_BUILD_TYPE STREQUAL "Debug")
-            add_definitions(-DTREZOR_DEBUG=1)
-        endif()
-
-        if(USE_DEVICE_TREZOR_UDP_RELEASE)
-            add_definitions(-DUSE_DEVICE_TREZOR_UDP_RELEASE=1)
-        endif()
-
-        if (Protobuf_INCLUDE_DIR)
-            include_directories(${Protobuf_INCLUDE_DIR})
-        endif()
-
-        # LibUSB support, check for particular version
-        # Include support only if compilation test passes
-        if (USE_DEVICE_TREZOR_LIBUSB)
-            find_package(LibUSB)
-        endif()
-
-        if (LibUSB_COMPILE_TEST_PASSED)
-            add_definitions(-DHAVE_TREZOR_LIBUSB=1)
-            if(LibUSB_INCLUDE_DIRS)
-                include_directories(${LibUSB_INCLUDE_DIRS})
-            endif()
-        endif()
-
-        set(TREZOR_LIBUSB_LIBRARIES "")
-        if(LibUSB_COMPILE_TEST_PASSED)
-            list(APPEND TREZOR_LIBUSB_LIBRARIES ${LibUSB_LIBRARIES} ${LIBUSB_DEP_LINKER})
-            message(STATUS "Trezor compatible LibUSB found at: ${LibUSB_INCLUDE_DIRS}")
-        endif()
-
-        if (BUILD_GUI_DEPS)
-            set(TREZOR_DEP_LIBS "")
-            set(TREZOR_DEP_LINKER "")
-
-            if (Protobuf_LIBRARY)
-                list(APPEND TREZOR_DEP_LIBS ${Protobuf_LIBRARY})
-                string(APPEND TREZOR_DEP_LINKER " -lprotobuf")
-            endif()
-
-            if (TREZOR_LIBUSB_LIBRARIES)
-                list(APPEND TREZOR_DEP_LIBS ${TREZOR_LIBUSB_LIBRARIES})
-                string(APPEND TREZOR_DEP_LINKER " -lusb-1.0 ${LIBUSB_DEP_LINKER}")
-            endif()
-        endif()
-    endif()
-endif()

cmake/Doxyfile.in

@@ -18,7 +18,7 @@
 # that follow. The default is UTF-8 which is also the encoding used for all 
 # text before the first occurrence of this tag. Doxygen uses libiconv (or the 
 # iconv built into libc) for the transcoding. See 
-# https://www.gnu.org/software/libiconv for the list of possible encodings.
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
 
 DOXYFILE_ENCODING      = UTF-8
 
@@ -242,7 +242,7 @@ EXTENSION_MAPPING      =
 
 # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all 
 # comments according to the Markdown format, which allows for more readable 
-# documentation. See https://daringfireball.net/projects/markdown/ for details. 
+# documentation. See http://daringfireball.net/projects/markdown/ for details. 
 # The output of markdown processing is further processed by doxygen, so you 
 # can mix doxygen, HTML, and XML commands with Markdown formatting. 
 # Disable only in case of backward compatibilities issues.
@@ -589,7 +589,7 @@ LAYOUT_FILE            =
 # containing the references data. This must be a list of .bib files. The 
 # .bib extension is automatically appended if omitted. Using this command 
 # requires the bibtex tool to be installed. See also 
-# https://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style 
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style 
 # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this 
 # feature you need bibtex and perl available in the search path.
 
@@ -665,7 +665,7 @@ INPUT                  = ../README.md \
 # This tag can be used to specify the character encoding of the source files 
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
 # also the default input encoding. Doxygen uses libiconv (or the iconv built 
-# into libc) for the transcoding. See https://www.gnu.org/software/libiconv for 
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
 # the list of possible encodings.
 
 INPUT_ENCODING         = UTF-8
@@ -833,7 +833,7 @@ REFERENCES_LINK_SOURCE = YES
 # If the USE_HTAGS tag is set to YES then the references to source code 
 # will point to the HTML generated by the htags(1) tool instead of doxygen 
 # built-in source browser. The htags tool is part of GNU's global source 
-# tagging system (see https://www.gnu.org/software/global/global.html). You 
+# tagging system (see http://www.gnu.org/software/global/global.html). You 
 # will need version 4.8.6 or higher.
 
 USE_HTAGS              = NO
@@ -928,7 +928,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. 
 # Doxygen will adjust the colors in the style sheet and background images 
 # according to this color. Hue is specified as an angle on a colorwheel, 
-# see https://en.wikipedia.org/wiki/Hue for more information. 
+# see http://en.wikipedia.org/wiki/Hue for more information. 
 # For instance the value 0 represents red, 60 is yellow, 120 is green, 
 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again. 
 # The allowed range is 0 to 359.
@@ -981,7 +981,7 @@ HTML_INDEX_NUM_ENTRIES = 100
 # directory and running "make install" will install the docset in 
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
 # it at startup. 
-# See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html 
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html 
 # for more information.
 
 GENERATE_DOCSET        = NO
@@ -1179,7 +1179,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax 
-# (see https://www.mathjax.org) which uses client side Javascript for the 
+# (see http://www.mathjax.org) which uses client side Javascript for the 
 # rendering instead of using prerendered bitmaps. Use this if you do not 
 # have LaTeX installed or if you want to formulas look prettier in the HTML 
 # output. When enabled you may also need to install MathJax separately and 
@@ -1194,9 +1194,9 @@ USE_MATHJAX            = NO
 # MATHJAX_RELPATH should be ../mathjax. The default value points to 
 # the MathJax Content Delivery Network so you can quickly see the result without 
 # installing MathJax.  However, it is strongly recommended to install a local 
-# copy of MathJax from https://www.mathjax.org before deployment.
+# copy of MathJax from http://www.mathjax.org before deployment.
 
-MATHJAX_RELPATH        = https://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension 
 # names that should be enabled during MathJax rendering.
@@ -1318,7 +1318,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the 
 # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See 
-# https://en.wikipedia.org/wiki/BibTeX for more info.
+# http://en.wikipedia.org/wiki/BibTeX for more info.
 
 LATEX_BIB_STYLE        = plain
 

cmake/FindBacktrace.cmake

@@ -1,98 +0,0 @@
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-#.rst:
-# FindBacktrace
-# -------------
-#
-# Find provider for backtrace(3).
-#
-# Checks if OS supports backtrace(3) via either libc or custom library.
-# This module defines the following variables:
-#
-# ``Backtrace_HEADER``
-#   The header file needed for backtrace(3). Cached.
-#   Could be forcibly set by user.
-# ``Backtrace_INCLUDE_DIRS``
-#   The include directories needed to use backtrace(3) header.
-# ``Backtrace_LIBRARIES``
-#   The libraries (linker flags) needed to use backtrace(3), if any.
-# ``Backtrace_FOUND``
-#   Is set if and only if backtrace(3) support detected.
-#
-# The following cache variables are also available to set or use:
-#
-# ``Backtrace_LIBRARY``
-#   The external library providing backtrace, if any.
-# ``Backtrace_INCLUDE_DIR``
-#   The directory holding the backtrace(3) header.
-#
-# Typical usage is to generate of header file using configure_file() with the
-# contents like the following::
-#
-#  #cmakedefine01 Backtrace_FOUND
-#  #if Backtrace_FOUND
-#  # include <${Backtrace_HEADER}>
-#  #endif
-#
-# And then reference that generated header file in actual source.
-
-include(CMakePushCheckState)
-include(CheckSymbolExists)
-include(FindPackageHandleStandardArgs)
-
-# List of variables to be provided to find_package_handle_standard_args()
-set(_Backtrace_STD_ARGS Backtrace_INCLUDE_DIR)
-
-if(Backtrace_HEADER)
-  set(_Backtrace_HEADER_TRY "${Backtrace_HEADER}")
-else(Backtrace_HEADER)
-  set(_Backtrace_HEADER_TRY "execinfo.h")
-endif(Backtrace_HEADER)
-
-find_path(Backtrace_INCLUDE_DIR "${_Backtrace_HEADER_TRY}")
-set(Backtrace_INCLUDE_DIRS ${Backtrace_INCLUDE_DIR})
-
-if (NOT DEFINED Backtrace_LIBRARY)
-  # First, check if we already have backtrace(), e.g., in libc
-  cmake_push_check_state(RESET)
-  set(CMAKE_REQUIRED_INCLUDES ${Backtrace_INCLUDE_DIRS})
-  set(CMAKE_REQUIRED_QUIET ${Backtrace_FIND_QUIETLY})
-  check_symbol_exists("backtrace" "${_Backtrace_HEADER_TRY}" _Backtrace_SYM_FOUND)
-  cmake_pop_check_state()
-endif()
-
-if(_Backtrace_SYM_FOUND)
-  # Avoid repeating the message() call below each time CMake is run.
-  if(NOT Backtrace_FIND_QUIETLY AND NOT DEFINED Backtrace_LIBRARY)
-    message(STATUS "backtrace facility detected in default set of libraries")
-  endif()
-  set(Backtrace_LIBRARY "" CACHE FILEPATH "Library providing backtrace(3), empty for default set of libraries")
-else()
-  # Check for external library, for non-glibc systems
-  if(Backtrace_INCLUDE_DIR)
-    # OpenBSD has libbacktrace renamed to libexecinfo
-    find_library(Backtrace_LIBRARY "execinfo")
-  elseif()     # respect user wishes
-    set(_Backtrace_HEADER_TRY "backtrace.h")
-    find_path(Backtrace_INCLUDE_DIR ${_Backtrace_HEADER_TRY})
-    find_library(Backtrace_LIBRARY "backtrace")
-  endif()
-
-  # Prepend list with library path as it's more common practice
-  set(_Backtrace_STD_ARGS Backtrace_LIBRARY ${_Backtrace_STD_ARGS})
-endif()
-
-message(STATUS "Backtrace_LIBRARY: ${Backtrace_LIBRARY}")
-if(Backtrace_LIBRARY STREQUAL "NOTFOUND")
-  set(Backtrace_LIBRARY "")
-endif()
-if(Backtrace_LIBRARY STREQUAL "Backtrace_LIBRARY-NOTFOUND")
-  set(Backtrace_LIBRARY "")
-endif()
-
-set(Backtrace_LIBRARIES ${Backtrace_LIBRARY})
-set(Backtrace_HEADER "${_Backtrace_HEADER_TRY}" CACHE STRING "Header providing backtrace(3) facility")
-
-find_package_handle_standard_args(Backtrace FOUND_VAR Backtrace_FOUND REQUIRED_VARS ${_Backtrace_STD_ARGS})
-mark_as_advanced(Backtrace_HEADER Backtrace_INCLUDE_DIR Backtrace_LIBRARY)

cmake/FindBerkeleyDB.cmake

@@ -0,0 +1,25 @@
+# - Try to find Berkeley DB
+# Once done this will define
+#
+#  BERKELEY_DB_FOUND - system has Berkeley DB
+#  BERKELEY_DB_INCLUDE_DIR - the Berkeley DB include directory
+#  BERKELEY_DB_LIBRARIES - Link these to use Berkeley DB
+#  BERKELEY_DB_DEFINITIONS - Compiler switches required for using Berkeley DB
+
+# Copyright (c) 2006, Alexander Dymo, <adymo@kdevelop.org>
+#
+# Redistribution and use is allowed according to the terms of the BSD license.
+# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
+
+find_path(BERKELEY_DB_INCLUDE_DIR db_cxx.h
+  /usr/include/db4
+  /usr/local/include/db4
+)
+
+find_library(BERKELEY_DB_LIBRARIES NAMES db_cxx )
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(Berkeley "Could not find Berkeley DB >= 4.1" BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES)
+# show the BERKELEY_DB_INCLUDE_DIR and BERKELEY_DB_LIBRARIES variables only in the advanced view
+mark_as_advanced(BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES )
+

cmake/FindCcache.cmake

@@ -1,57 +0,0 @@
-# Copyright (c) 2014-2020, The Monero Project
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification, are
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this list of
-#    conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list
-#    of conditions and the following disclaimer in the documentation and/or other
-#    materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its contributors may be
-#    used to endorse or promote products derived from this software without specific
-#    prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# - Try to find readline include dirs and libraries 
-#
-# Automatically finds ccache build accelerator, if it's found in PATH.
-#
-# Usage of this module as follows:
-#
-#     project(monero)
-#     include(FindCcache) # Include AFTER the project() macro to be able to reach the CMAKE_CXX_COMPILER variable
-#
-# Properties modified by this module:
-#
-#  GLOBAL PROPERTY RULE_LAUNCH_COMPILE     set to ccache, when ccache found
-#  GLOBAL PROPERTY RULE_LAUNCH_LINK        set to ccache, when ccache found
-
-find_program(CCACHE_FOUND ccache)
-if (CCACHE_FOUND)
-	set(TEMP_CPP_FILE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/test-program.cpp")
-	file(WRITE "${TEMP_CPP_FILE}" "int main() { return 0; }")
-	execute_process(COMMAND "${CCACHE_FOUND}" "${CMAKE_CXX_COMPILER}" "${TEMP_CPP_FILE}"  RESULT_VARIABLE RET)
-	if (${RET} EQUAL 0)
-		message("found usable ccache: ${CCACHE_FOUND}")
-		set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_FOUND}")
-		set_property(GLOBAL PROPERTY RULE_LAUNCH_LINK    "${CCACHE_FOUND}")
-	else()
-		message("found ccache ${CCACHE_FOUND}, but is UNUSABLE! Return code: ${RET}")
-	endif()	    	
-else()
-	message("ccache NOT found!")
-endif()
-

cmake/FindHIDAPI.cmake

@@ -1,60 +0,0 @@
-# - try to find HIDAPI library
-# from http://www.signal11.us/oss/hidapi/
-#
-# Cache Variables: (probably not for direct use in your scripts)
-#  HIDAPI_INCLUDE_DIR
-#  HIDAPI_LIBRARY
-#
-# Non-cache variables you might use in your CMakeLists.txt:
-#  HIDAPI_FOUND
-#  HIDAPI_INCLUDE_DIRS
-#  HIDAPI_LIBRARIES
-#
-# Requires these CMake modules:
-#  FindPackageHandleStandardArgs (known included with CMake >=2.6.2)
-#
-# Original Author:
-# 2009-2010 Ryan Pavlik <rpavlik@iastate.edu> <abiryan@ryand.net>
-# http://academic.cleardefinition.com
-# Iowa State University HCI Graduate Program/VRAC
-#
-# Copyright Iowa State University 2009-2010.
-# Distributed under the Boost Software License, Version 1.0.
-# (See accompanying file LICENSE_1_0.txt or copy at
-# http://www.boost.org/LICENSE_1_0.txt)
-
-find_library(HIDAPI_LIBRARY
-  NAMES hidapi hidapi-libusb)
-
-find_path(HIDAPI_INCLUDE_DIR
-  NAMES hidapi.h
-  PATH_SUFFIXES
-  hidapi)
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(HIDAPI
-  DEFAULT_MSG
-  HIDAPI_LIBRARY
-  HIDAPI_INCLUDE_DIR)
-
-if(HIDAPI_FOUND)
-  set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARY}")
-  if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux"))
-    find_library(LIBUSB-1.0_LIBRARY usb-1.0)
-    find_library(LIBUDEV_LIBRARY udev)
-    if(LIBUSB-1.0_LIBRARY)
-      set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUSB-1.0_LIBRARY}")
-      if(LIBUDEV_LIBRARY)
-        set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUDEV_LIBRARY}")
-      else()
-        message(WARNING "libudev library not found, binaries may fail to link.")
-      endif()
-    else()
-      message(WARNING "libusb-1.0 library not found, binaries may fail to link.")
-    endif()
-  endif()
-
-  set(HIDAPI_INCLUDE_DIRS "${HIDAPI_INCLUDE_DIR}")
-endif()
-
-mark_as_advanced(HIDAPI_INCLUDE_DIR HIDAPI_LIBRARY)

cmake/FindLibUSB.cmake

@@ -1,155 +0,0 @@
-# - Find libusb for portable USB support
-# This module will find libusb as published by
-#  http://libusb.sf.net and
-#  http://libusb-win32.sf.net
-#
-# It will use PkgConfig if present and supported, else search
-# it on its own. If the LibUSB_ROOT_DIR environment variable
-# is defined, it will be used as base path.
-# The following standard variables get defined:
-#  LibUSB_FOUND:        true if LibUSB was found
-#  LibUSB_HEADER_FILE:  the location of the C header file
-#  LibUSB_INCLUDE_DIRS: the directory that contains the include file
-#  LibUSB_LIBRARIES:    the library
-# source: https://github.com/IntelRealSense/librealsense
-
-include ( CheckLibraryExists )
-include ( CheckIncludeFile )
-
-find_package ( PkgConfig )
-if ( PKG_CONFIG_FOUND )
-    pkg_check_modules ( PKGCONFIG_LIBUSB libusb-1.0 )
-    if ( NOT PKGCONFIG_LIBUSB_FOUND )
-        pkg_check_modules ( PKGCONFIG_LIBUSB libusb )
-    endif ( NOT PKGCONFIG_LIBUSB_FOUND )
-endif ( PKG_CONFIG_FOUND )
-
-if ( PKGCONFIG_LIBUSB_FOUND )
-    set ( LibUSB_INCLUDE_DIRS ${PKGCONFIG_LIBUSB_INCLUDE_DIRS} )
-    foreach ( i ${PKGCONFIG_LIBUSB_LIBRARIES} )
-        string ( REGEX MATCH "[^-]*" ibase "${i}" )
-        find_library ( ${ibase}_LIBRARY
-                NAMES ${i}
-                PATHS ${PKGCONFIG_LIBUSB_LIBRARY_DIRS}
-                )
-        if ( ${ibase}_LIBRARY )
-            list ( APPEND LibUSB_LIBRARIES ${${ibase}_LIBRARY} )
-        endif ( ${ibase}_LIBRARY )
-        mark_as_advanced ( ${ibase}_LIBRARY )
-    endforeach ( i )
-
-else ( PKGCONFIG_LIBUSB_FOUND )
-    find_file ( LibUSB_HEADER_FILE
-            NAMES
-            libusb.h usb.h
-            PATHS
-            $ENV{ProgramFiles}/LibUSB-Win32
-            $ENV{LibUSB_ROOT_DIR}
-            PATH_SUFFIXES
-            include
-            libusb-1.0
-            include/libusb-1.0
-            )
-    mark_as_advanced ( LibUSB_HEADER_FILE )
-    get_filename_component ( LibUSB_INCLUDE_DIRS "${LibUSB_HEADER_FILE}" PATH )
-
-    if ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" )
-        # LibUSB-Win32 binary distribution contains several libs.
-        # Use the lib that got compiled with the same compiler.
-        if ( MSVC )
-            if ( WIN32 )
-                set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc )
-            else ( WIN32 )
-                set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc_x64 )
-            endif ( WIN32 )
-        elseif ( BORLAND )
-            set ( LibUSB_LIBRARY_PATH_SUFFIX lib/bcc )
-        elseif ( CMAKE_COMPILER_IS_GNUCC )
-            set ( LibUSB_LIBRARY_PATH_SUFFIX lib/gcc )
-        endif ( MSVC )
-    endif ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" )
-
-    find_library ( usb_LIBRARY
-            NAMES
-            usb-1.0 libusb usb
-            PATHS
-            $ENV{ProgramFiles}/LibUSB-Win32
-            $ENV{LibUSB_ROOT_DIR}
-            PATH_SUFFIXES
-            ${LibUSB_LIBRARY_PATH_SUFFIX}
-            )
-    mark_as_advanced ( usb_LIBRARY )
-    if ( usb_LIBRARY )
-        set ( LibUSB_LIBRARIES ${usb_LIBRARY} )
-    endif ( usb_LIBRARY )
-
-endif ( PKGCONFIG_LIBUSB_FOUND )
-
-if ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES )
-    set ( LibUSB_FOUND true )
-endif ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES )
-
-if ( LibUSB_FOUND )
-    set ( CMAKE_REQUIRED_INCLUDES "${LibUSB_INCLUDE_DIRS}" )
-    check_include_file ( "${LibUSB_HEADER_FILE}" LibUSB_FOUND )
-endif ( LibUSB_FOUND )
-
-if ( LibUSB_FOUND )
-    check_library_exists ( "${LibUSB_LIBRARIES}" usb_open "" LibUSB_FOUND )
-    check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_device_list "" LibUSB_VERSION_1.0 )
-    check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_port_numbers "" LibUSB_VERSION_1.0.16 )
-
-    if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux"))
-        find_library(LIBUDEV_LIBRARY udev)
-        if(LIBUDEV_LIBRARY)
-            set(LibUSB_LIBRARIES "${LibUSB_LIBRARIES};${LIBUDEV_LIBRARY}")
-        else()
-            message(WARNING "libudev library not found, binaries may fail to link.")
-        endif()
-    endif()
-
-    # Library 1.0.16+ compilation test.
-    # The check_library_exists does not work well on Apple with shared libs.
-    if (APPLE OR LibUSB_VERSION_1.0.16 OR STATIC)
-        if (APPLE)
-            if(DEPENDS)
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES "-framework Foundation -framework IOKit")
-            else()
-                find_library(COREFOUNDATION CoreFoundation)
-                find_library(IOKIT IOKit)
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${IOKIT})
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${COREFOUNDATION})
-
-                if(STATIC)
-                    find_library(OBJC objc.a)
-                    set(LIBUSB_DEP_LINKER ${OBJC})
-                    list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${LIBUSB_DEP_LINKER})
-                endif()
-            endif()
-        endif()
-        if (WIN32)
-            list(APPEND TEST_COMPILE_EXTRA_LIBRARIES setupapi)
-        endif()
-        list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${LibUSB_LIBRARIES})
-
-        try_compile(LibUSB_COMPILE_TEST_PASSED
-                ${CMAKE_BINARY_DIR}
-                "${CMAKE_SOURCE_DIR}/cmake/test-libusb-version.c"
-                CMAKE_FLAGS
-                    "-DINCLUDE_DIRECTORIES=${LibUSB_INCLUDE_DIRS}"
-                    "-DLINK_DIRECTORIES=${LibUSB_LIBRARIES}"
-                LINK_LIBRARIES ${TEST_COMPILE_EXTRA_LIBRARIES}
-                OUTPUT_VARIABLE OUTPUT)
-        unset(TEST_COMPILE_EXTRA_LIBRARIES)
-        message(STATUS "LibUSB Compilation test: ${LibUSB_COMPILE_TEST_PASSED}")
-    endif()
-endif ( LibUSB_FOUND )
-
-if ( NOT LibUSB_FOUND )
-    if ( NOT LibUSB_FIND_QUIETLY )
-        message ( STATUS "LibUSB not found, try setting LibUSB_ROOT_DIR environment variable." )
-    endif ( NOT LibUSB_FIND_QUIETLY )
-    if ( LibUSB_FIND_REQUIRED )
-        message ( FATAL_ERROR "" )
-    endif ( LibUSB_FIND_REQUIRED )
-endif ( NOT LibUSB_FOUND )

cmake/FindMiniupnpc.cmake

@@ -46,13 +46,13 @@ IF(MINIUPNPC_FOUND)
   file(STRINGS "${MINIUPNP_INCLUDE_DIR}/miniupnpc.h" MINIUPNPC_API_VERSION_STR REGEX "^#define[\t ]+MINIUPNPC_API_VERSION[\t ]+[0-9]+")
   if(MINIUPNPC_API_VERSION_STR MATCHES "^#define[\t ]+MINIUPNPC_API_VERSION[\t ]+([0-9]+)")
     set(MINIUPNPC_API_VERSION "${CMAKE_MATCH_1}")
-	if (${MINIUPNPC_API_VERSION} GREATER "10" OR ${MINIUPNPC_API_VERSION} EQUAL "10")
-		message(STATUS "Found miniupnpc API version " ${MINIUPNPC_API_VERSION})
-		set(MINIUPNP_FOUND true)
-		set(MINIUPNPC_VERSION_1_7_OR_HIGHER true)
-	endif()
   endif()
 
+ if (${MINIUPNPC_API_VERSION} GREATER "10" OR ${MINIUPNPC_API_VERSION} EQUAL "10")
+	message(STATUS "Found miniupnpc API version " ${MINIUPNPC_API_VERSION})
+	set(MINIUPNP_FOUND true)
+	set(MINIUPNPC_VERSION_1_7_OR_HIGHER true)
+  endif()
 ENDIF()
 
 mark_as_advanced(MINIUPNP_INCLUDE_DIR MINIUPNP_LIBRARY MINIUPNP_STATIC_LIBRARY)

cmake/FindReadline.cmake

@@ -15,15 +15,12 @@
 #
 #  READLINE_FOUND            System has readline, include and lib dirs found
 #  GNU_READLINE_FOUND        Version of readline found is GNU readline, not libedit!
-#  LIBEDIT_FOUND             Version of readline found is libedit, not GNU readline!
 #  Readline_INCLUDE_DIR      The readline include directories. 
 #  Readline_LIBRARY          The readline library.
-#  GNU_READLINE_LIBRARY      The GNU readline library or empty string.
-#  LIBEDIT_LIBRARY           The libedit library or empty string.
 
 find_path(Readline_ROOT_DIR
     NAMES include/readline/readline.h
-    PATHS /usr/local/opt/readline/ /opt/local/ /usr/local/ /usr/
+    PATHS /opt/local/ /usr/local/ /usr/
     NO_DEFAULT_PATH
 )
 
@@ -39,18 +36,14 @@ find_library(Readline_LIBRARY
     NO_DEFAULT_PATH
 )
 
-find_library(Termcap_LIBRARY
-  NAMES tinfo termcap ncursesw ncurses cursesw curses
-)
-
-if(Readline_INCLUDE_DIR AND Readline_LIBRARY)
+if(Readline_INCLUDE_DIR AND Readline_LIBRARY AND Ncurses_LIBRARY)
   set(READLINE_FOUND TRUE)
-else(Readline_INCLUDE_DIR AND Readline_LIBRARY)
+else(Readline_INCLUDE_DIR AND Readline_LIBRARY AND Ncurses_LIBRARY)
   FIND_LIBRARY(Readline_LIBRARY NAMES readline PATHS Readline_ROOT_DIR)
   include(FindPackageHandleStandardArgs)
   FIND_PACKAGE_HANDLE_STANDARD_ARGS(Readline DEFAULT_MSG Readline_INCLUDE_DIR Readline_LIBRARY )
   MARK_AS_ADVANCED(Readline_INCLUDE_DIR Readline_LIBRARY)
-endif(Readline_INCLUDE_DIR AND Readline_LIBRARY)
+endif(Readline_INCLUDE_DIR AND Readline_LIBRARY AND Ncurses_LIBRARY)
 
 mark_as_advanced(
     Readline_ROOT_DIR
@@ -60,32 +53,14 @@ mark_as_advanced(
 
 set(CMAKE_REQUIRED_INCLUDES ${Readline_INCLUDE_DIR})
 set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY})
-
-include(CheckFunctionExists)
-check_function_exists(rl_copy_text HAVE_COPY_TEXT)
-check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION)
-
-if(NOT HAVE_COMPLETION_FUNCTION)
-  if (Readline_LIBRARY)
-    set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY} ${Termcap_LIBRARY})
-  endif(Readline_LIBRARY)
-  check_function_exists(rl_copy_text HAVE_COPY_TEXT_TC)
-  check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION_TC)
-  set(HAVE_COMPLETION_FUNCTION ${HAVE_COMPLETION_FUNCTION_TC})
-  set(HAVE_COPY_TEXT ${HAVE_COPY_TEXT_TC})
-  if(HAVE_COMPLETION_FUNCTION)
-    set(Readline_LIBRARY ${Readline_LIBRARY} ${Termcap_LIBRARY})
-  endif(HAVE_COMPLETION_FUNCTION)
-endif(NOT HAVE_COMPLETION_FUNCTION)
-
-set(LIBEDIT_LIBRARY "")
-set(GNU_READLINE_LIBRARY "")
-
-if(HAVE_COMPLETION_FUNCTION AND HAVE_COPY_TEXT)
-  set(GNU_READLINE_FOUND TRUE)
-  set(GNU_READLINE_LIBRARY ${Readline_LIBRARY})
-elseif(READLINE_FOUND AND NOT HAVE_COPY_TEXT)
-  set(LIBEDIT_FOUND TRUE)
-  set(LIBEDIT_LIBRARY ${Readline_LIBRARY})
-endif(HAVE_COMPLETION_FUNCTION AND HAVE_COPY_TEXT)
-
+INCLUDE(CheckCXXSourceCompiles) 
+CHECK_CXX_SOURCE_COMPILES(
+"
+#include <stdio.h>
+#include <readline/readline.h>
+int
+main()
+{
+  char * s  = rl_copy_text(0, 0);
+}
+" GNU_READLINE_FOUND)

cmake/FindUnbound.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2019, The Monero Project
+# Copyright (c) 2014-2017, The Monero Project
 # All rights reserved.
 # 
 # Redistribution and use in source and binary forms, with or without modification, are

cmake/GitVersion.cmake

@@ -1,79 +0,0 @@
-# Copyright (c) 2014-2019, The Monero Project
-# 
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without modification, are
-# permitted provided that the following conditions are met:
-# 
-# 1. Redistributions of source code must retain the above copyright notice, this list of
-#    conditions and the following disclaimer.
-# 
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list
-#    of conditions and the following disclaimer in the documentation and/or other
-#    materials provided with the distribution.
-# 
-# 3. Neither the name of the copyright holder nor the names of its contributors may be
-#    used to endorse or promote products derived from this software without specific
-#    prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# 
-# Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
-
-# Check what commit we're on
-
-function (get_version_tag_from_git GIT)
-    execute_process(COMMAND "${GIT}" rev-parse --short=9 HEAD
-                    WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
-                    RESULT_VARIABLE RET
-                    OUTPUT_VARIABLE COMMIT
-                    OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    if(RET)
-        # Something went wrong, set the version tag to -unknown
-
-        message(WARNING "Cannot determine current commit. Make sure that you are building either from a Git working tree or from a source archive.")
-        set(VERSIONTAG "unknown")
-        set(VERSION_IS_RELEASE "false")
-    else()
-        string(SUBSTRING ${COMMIT} 0 9 COMMIT)
-        message(STATUS "You are currently on commit ${COMMIT}")
-
-        # Get all the tags
-        execute_process(COMMAND "${GIT}" rev-list --tags --max-count=1 --abbrev-commit 
-                        WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
-                        RESULT_VARIABLE RET
-                        OUTPUT_VARIABLE TAGGEDCOMMIT
-                        OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-        if(NOT TAGGEDCOMMIT)
-            message(WARNING "Cannot determine most recent tag. Make sure that you are building either from a Git working tree or from a source archive.")
-            set(VERSIONTAG "${COMMIT}")
-            set(VERSION_IS_RELEASE "false")
-        else()
-            message(STATUS "The most recent tag was at ${TAGGEDCOMMIT}")
-
-            # Check if we're building that tagged commit or a different one
-            if(COMMIT STREQUAL TAGGEDCOMMIT)
-                message(STATUS "You are building a tagged release")
-                set(VERSIONTAG "release")
-                set(VERSION_IS_RELEASE "true")
-            else()
-                message(STATUS "You are ahead of or behind a tagged release")
-                set(VERSIONTAG "${COMMIT}")
-                set(VERSION_IS_RELEASE "false")
-            endif()
-        endif()	    
-    endif()
-
-    set(VERSIONTAG "${VERSIONTAG}" PARENT_SCOPE)
-    set(VERSION_IS_RELEASE "${VERSION_IS_RELEASE}" PARENT_SCOPE)
-endfunction()

cmake/Version.cmake

@@ -1,50 +0,0 @@
-# Copyright (c) 2014-2019, The Monero Project
-# 
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without modification, are
-# permitted provided that the following conditions are met:
-# 
-# 1. Redistributions of source code must retain the above copyright notice, this list of
-#    conditions and the following disclaimer.
-# 
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list
-#    of conditions and the following disclaimer in the documentation and/or other
-#    materials provided with the distribution.
-# 
-# 3. Neither the name of the copyright holder nor the names of its contributors may be
-#    used to endorse or promote products derived from this software without specific
-#    prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-function (write_version tag)
-  set(VERSIONTAG "${tag}" CACHE STRING "The tag portion of the Monero software version" FORCE)
-  configure_file("${CMAKE_SOURCE_DIR}/src/version.cpp.in" "${CMAKE_BINARY_DIR}/version.cpp")
-endfunction ()
-
-find_package(Git QUIET)
-if ("$Format:$" STREQUAL "")
-  # We're in a tarball; use hard-coded variables.
-  set(VERSION_IS_RELEASE "true")
-  write_version("release")
-elseif (GIT_FOUND OR Git_FOUND)
-  message(STATUS "Found Git: ${GIT_EXECUTABLE}")
-  include(GitVersion)
-  get_version_tag_from_git("${GIT_EXECUTABLE}")
-  write_version("${VERSIONTAG}")
-else()
-  message(STATUS "WARNING: Git was not found!")
-  set(VERSION_IS_RELEASE "false")
-  write_version("unknown")
-endif ()
-add_custom_target(genversion ALL
-  DEPENDS "${CMAKE_BINARY_DIR}/version.cpp")

cmake/test-libusb-version.c

@@ -1,52 +0,0 @@
-// Copyright (c) 2014-2019, The Monero Project
-// 
-// All rights reserved.
-// 
-// Redistribution and use in source and binary forms, with or without modification, are
-// permitted provided that the following conditions are met:
-// 
-// 1. Redistributions of source code must retain the above copyright notice, this list of
-//    conditions and the following disclaimer.
-// 
-// 2. Redistributions in binary form must reproduce the above copyright notice, this list
-//    of conditions and the following disclaimer in the documentation and/or other
-//    materials provided with the distribution.
-// 
-// 3. Neither the name of the copyright holder nor the names of its contributors may be
-//    used to endorse or promote products derived from this software without specific
-//    prior written permission.
-// 
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <libusb.h>
-
-#define UNUSED(expr) (void)(expr)
-
-int main(int argc, char *argv[]) {
-  libusb_device **devs;
-  libusb_context *ctx = NULL;
-
-  int r = libusb_init(&ctx); UNUSED(r);
-  ssize_t cnt = libusb_get_device_list(ctx, &devs); UNUSED(cnt);
-
-  struct libusb_device_descriptor desc;
-  r = libusb_get_device_descriptor(devs[0], &desc); UNUSED(r);
-  uint8_t bus_id = libusb_get_bus_number(devs[0]); UNUSED(bus_id);
-  uint8_t addr = libusb_get_device_address(devs[0]); UNUSED(addr);
-
-  uint8_t tmp_path[16];
-  r = libusb_get_port_numbers(devs[0], tmp_path, sizeof(tmp_path));
-  UNUSED(r);
-  UNUSED(tmp_path);
-
-  libusb_free_device_list(devs, 1);
-  libusb_exit(ctx);
-}

cmake/test-protobuf.cpp

@@ -1,43 +0,0 @@
-// Copyright (c) 2014-2019, The Monero Project
-// 
-// All rights reserved.
-// 
-// Redistribution and use in source and binary forms, with or without modification, are
-// permitted provided that the following conditions are met:
-// 
-// 1. Redistributions of source code must retain the above copyright notice, this list of
-//    conditions and the following disclaimer.
-// 
-// 2. Redistributions in binary form must reproduce the above copyright notice, this list
-//    of conditions and the following disclaimer in the documentation and/or other
-//    materials provided with the distribution.
-// 
-// 3. Neither the name of the copyright holder nor the names of its contributors may be
-//    used to endorse or promote products derived from this software without specific
-//    prior written permission.
-// 
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <string>
-#include <iostream>
-#include <google/protobuf/message.h>
-#include <google/protobuf/unknown_field_set.h>
-#include "test-protobuf.pb.h"
-
-int main(int argc, char *argv[]) {
-  google::protobuf::UnknownFieldSet ufs;
-  ufs.ClearAndFreeMemory();
-
-  Success sc;
-  sc.set_message("test");
-  sc.SerializeToOstream(&std::cerr);
-  return 0;
-}

cmake/test-protobuf.proto

@@ -1,7 +0,0 @@
-syntax = "proto2";
-
-import "google/protobuf/descriptor.proto";
-
-message Success {
-    optional string message = 1;
-}

cmake/test-static-assert.c

@@ -1,4 +1,4 @@
-// Copyright (c) 2014-2019, The Monero Project
+// Copyright (c) 2014-2017, The Monero Project
 // 
 // All rights reserved.
 // 

cmake/test-static-assert.cpp

@@ -1,4 +1,4 @@
-// Copyright (c) 2014-2019, The Monero Project
+// Copyright (c) 2014-2017, The Monero Project
 // 
 // All rights reserved.
 // 

contrib/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2019, The Monero Project
+# Copyright (c) 2014-2017, The Monero Project
 # 
 # All rights reserved.
 # 

contrib/brew/Brewfile

@@ -1,34 +0,0 @@
-# Brewfile for Monero
-# A homebrew Brewfile installs all required dependencies in one shot
-# see https://coderwall.com/p/afmnbq/homebrew-s-new-feature-brewfiles
-#     https://github.com/Homebrew/homebrew-bundle
-# execute brew bundle in the directory containing the Brewfile
-
-tap "homebrew/bundle"
-tap "homebrew/cask"
-tap "homebrew/cask-versions"
-tap "homebrew/core"
-
-brew "autoconf"
-brew "autogen"
-brew "automake"
-brew "binutils"
-brew "coreutils"
-brew "cmake"
-brew "pkg-config"
-brew "boost"
-brew "openssl"
-brew "hidapi"
-brew "zmq"
-brew "libpgm"
-brew "unbound"
-brew "libsodium"
-brew "miniupnpc"
-brew "readline"
-brew "ldns"
-brew "expat"
-brew "doxygen"
-brew "graphviz"
-brew "libunwind-headers"
-brew "xz"
-brew "protobuf"

contrib/codefresh/codefresh.yml

@@ -1,18 +0,0 @@
-version: '1.0'
-steps:
-  init_submodules:
-    title: Init Submodules
-    commands:
-      - git submodule update --init --recursive
-    image: codefreshio/git-image:latest
-    working_directory: ${{main_clone}}
-
-  BuildingDockerImage:
-    title: Building Docker Image
-    type: build
-    image_name: monero
-    working_directory: ./
-    tag: '${{CF_BRANCH_TAG_NORMALIZED}}'
-    dockerfile: Dockerfile
-    build_arguments:
-      - NPROC=1

contrib/depends/.gitignore

@@ -1,10 +0,0 @@
-SDKs/
-work/
-built/
-sources/
-config.site
-x86_64*
-i686*
-mips*
-arm*
-aarch64*

contrib/depends/Makefile

@@ -1,232 +0,0 @@
-.NOTPARALLEL :
-
-SOURCES_PATH ?= $(BASEDIR)/sources
-BASE_CACHE ?= $(BASEDIR)/built
-SDK_PATH ?= $(BASEDIR)/SDKs
-FALLBACK_DOWNLOAD_PATH ?= https://bitcoincore.org/depends-sources
-
-BUILD = $(shell ./config.guess)
-HOST ?= $(BUILD)
-PATCHES_PATH = $(BASEDIR)/patches
-BASEDIR = $(CURDIR)
-HASH_LENGTH:=11
-DOWNLOAD_CONNECT_TIMEOUT:=10
-DOWNLOAD_RETRIES:=3
-HOST_ID_SALT ?= salt
-BUILD_ID_SALT ?= salt
-
-host:=$(BUILD)
-ifneq ($(HOST),)
-host:=$(HOST)
-host_toolchain:=$(HOST)-
-endif
-
-ifneq ($(DEBUG),)
-release_type=Debug
-else
-release_type=Release
-endif
-
-ifneq ($(TESTS),)
-build_tests=ON
-release_type=Debug
-else
-build_tests=OFF
-endif
-
-base_build_dir=$(BASEDIR)/work/build
-base_staging_dir=$(BASEDIR)/work/staging
-base_download_dir=$(BASEDIR)/work/download
-canonical_host:=$(shell ./config.sub $(HOST))
-build:=$(shell ./config.sub $(BUILD))
-
-build_arch =$(firstword $(subst -, ,$(build)))
-build_vendor=$(word 2,$(subst -, ,$(build)))
-full_build_os:=$(subst $(build_arch)-$(build_vendor)-,,$(build))
-build_os:=$(findstring linux,$(full_build_os))
-build_os+=$(findstring darwin,$(full_build_os))
-build_os:=$(strip $(build_os))
-ifeq ($(build_os),)
-build_os=$(full_build_os)
-endif
-
-host_arch=$(firstword $(subst -, ,$(canonical_host)))
-host_vendor=$(word 2,$(subst -, ,$(canonical_host)))
-full_host_os:=$(subst $(host_arch)-$(host_vendor)-,,$(canonical_host))
-host_os:=$(findstring android,$(full_host_os))
-ifeq ($(host_os),)
-host_os:=$(findstring linux,$(full_host_os))
-endif
-host_os+=$(findstring darwin,$(full_host_os))
-host_os+=$(findstring freebsd,$(full_host_os))
-host_os+=$(findstring mingw32,$(full_host_os))
-host_os:=$(strip $(host_os))
-ifeq ($(host_os),)
-host_os=$(full_host_os)
-endif
-
-$(host_arch)_$(host_os)_prefix=$(BASEDIR)/$(host)
-$(host_arch)_$(host_os)_host=$(host)
-host_prefix=$($(host_arch)_$(host_os)_prefix)
-build_prefix=$(host_prefix)/native
-ifeq ($(host_os),mingw32)
-host_cmake=Windows
-endif
-ifeq ($(host_os),linux)
-host_cmake=Linux
-endif
-ifeq ($(host_os),freebsd)
-host_cmake=FreeBSD
-endif
-ifeq ($(host_os),darwin)
-host_cmake=Darwin
-endif
-ifeq ($(host_os),android)
-host_cmake=Android
-endif
-
-AT_$(V):=
-AT_:=@
-AT:=$(AT_$(V))
-
-all: install
-
-include hosts/$(host_os).mk
-include hosts/default.mk
-include builders/$(build_os).mk
-include builders/default.mk
-include packages/packages.mk
-
-build_id_string:=$(BUILD_ID_SALT)
-build_id_string+=$(shell $(build_CC) --version 2>/dev/null)
-build_id_string+=$(shell $(build_AR) --version 2>/dev/null)
-build_id_string+=$(shell $(build_CXX) --version 2>/dev/null)
-build_id_string+=$(shell $(build_RANLIB) --version 2>/dev/null)
-build_id_string+=$(shell $(build_STRIP) --version 2>/dev/null)
-
-$(host_arch)_$(host_os)_id_string:=$(HOST_ID_SALT)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_CC) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_AR) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_CXX) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_RANLIB) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_STRIP) --version 2>/dev/null)
-
-qt_packages_$(NO_QT) = $(qt_packages) 
-packages += $($(host_arch)_$(host_os)_packages) $($(host_os)_packages) $(qt_packages_)
-native_packages += $($(host_arch)_$(host_os)_native_packages) $($(host_os)_native_packages)
-
-all_packages = $(packages) $(native_packages)
-
-meta_depends = Makefile funcs.mk builders/default.mk hosts/default.mk hosts/$(host_os).mk builders/$(build_os).mk
-
-$(host_arch)_$(host_os)_native_toolchain?=$($(host_os)_native_toolchain)
-
-include funcs.mk
-
-CONF_PKGS := cmake-conf mxe-conf
-
-build-only-$(1)_$(3): CMAKE_RUNRESULT_FILE = $(PREFIX)/share/cmake/modules/TryRunResults.cmake
-build-only-$(1)_$(3): CMAKE_TOOLCHAIN_FILE = $(PREFIX)/$(3)/share/cmake/mxe-conf.cmake
-build-only-$(1)_$(3): CMAKE_TOOLCHAIN_DIR  = $(PREFIX)/$(3)/share/cmake/mxe-conf.d
-build-only-$(1)_$(3): CMAKE_STATIC_BOOL = $(if $(findstring shared,$(3)),OFF,ON)
-build-only-$(1)_$(3): CMAKE_SHARED_BOOL = $(if $(findstring shared,$(3)),ON,OFF)
-
-
-toolchain_path=$($($(host_arch)_$(host_os)_native_toolchain)_prefixbin)
-final_build_id_long+=$(shell $(build_SHA256SUM) config.site.in)
-final_build_id_long+=$(shell $(build_SHA256SUM) toolchain.cmake.in)
-final_build_id+=$(shell echo -n "$(final_build_id_long)" | $(build_SHA256SUM) | cut -c-$(HASH_LENGTH))
-$(host_prefix)/.stamp_$(final_build_id): $(native_packages) $(packages)
-	$(AT)rm -rf $(@D)
-	$(AT)mkdir -p $(@D)
-	$(AT)echo copying packages: $^
-	$(AT)echo to: $(@D)
-	$(AT)cd $(@D); $(foreach package,$^, tar xf $($(package)_cached); )
-	$(AT)touch $@
-
-$(host_prefix)/share/config.site : config.site.in $(host_prefix)/.stamp_$(final_build_id)
-	$(AT)@mkdir -p $(@D)
-	$(AT)sed -e 's|@HOST@|$(host)|' \
-            -e 's|@CC@|$(toolchain_path)$(host_CC)|' \
-            -e 's|@CXX@|$(toolchain_path)$(host_CXX)|' \
-            -e 's|@AR@|$(toolchain_path)$(host_AR)|' \
-            -e 's|@RANLIB@|$(toolchain_path)$(host_RANLIB)|' \
-            -e 's|@NM@|$(toolchain_path)$(host_NM)|' \
-            -e 's|@STRIP@|$(toolchain_path)$(host_STRIP)|' \
-            -e 's|@build_os@|$(build_os)|' \
-            -e 's|@host_os@|$(host_os)|' \
-            -e 's|@CFLAGS@|$(strip $(host_CFLAGS) $(host_$(release_type)_CFLAGS))|' \
-            -e 's|@CXXFLAGS@|$(strip $(host_CXXFLAGS) $(host_$(release_type)_CXXFLAGS))|' \
-            -e 's|@CPPFLAGS@|$(strip $(host_CPPFLAGS) $(host_$(release_type)_CPPFLAGS))|' \
-            -e 's|@LDFLAGS@|$(strip $(host_LDFLAGS) $(host_$(release_type)_LDFLAGS))|' \
-            -e 's|@allow_host_packages@|$(ALLOW_HOST_PACKAGES)|' \
-            -e 's|@debug@|$(DEBUG)|' \
-            $< > $@
-	$(AT)touch $@
-
-$(host_prefix)/share/toolchain.cmake : toolchain.cmake.in $(host_prefix)/.stamp_$(final_build_id)
-	$(AT)@mkdir -p $(@D)
-	$(AT)sed -e 's|@HOST@|$(host)|' \
-            -e 's|@CC@|$(toolchain_path)$(host_CC)|' \
-            -e 's|@CXX@|$(toolchain_path)$(host_CXX)|' \
-            -e 's|@AR@|$(toolchain_path)$(host_AR)|' \
-            -e 's|@RANLIB@|$(toolchain_path)$(host_RANLIB)|' \
-            -e 's|@NM@|$(toolchain_path)$(host_NM)|' \
-            -e 's|@STRIP@|$(toolchain_path)$(host_STRIP)|' \
-            -e 's|@build_os@|$(build_os)|' \
-            -e 's|@host_os@|$(host_os)|' \
-            -e 's|@CFLAGS@|$(strip $(host_CFLAGS) $(host_$(release_type)_CFLAGS))|' \
-            -e 's|@CXXFLAGS@|$(strip $(host_CXXFLAGS) $(host_$(release_type)_CXXFLAGS))|' \
-            -e 's|@CPPFLAGS@|$(strip $(host_CPPFLAGS) $(host_$(release_type)_CPPFLAGS))|' \
-            -e 's|@LDFLAGS@|$(strip $(host_LDFLAGS) $(host_$(release_type)_LDFLAGS))|' \
-            -e 's|@allow_host_packages@|$(ALLOW_HOST_PACKAGES)|' \
-            -e 's|@debug@|$(DEBUG)|' \
-            -e 's|@release_type@|$(release_type)|' \
-            -e 's|@build_tests@|$(build_tests)|' \
-            -e 's|@depends@|$(host_cmake)|' \
-            -e 's|@prefix@|$($(host_arch)_$(host_os)_prefix)|'\
-            -e 's|@sdk@|$(SDK_PATH)|'\
-            -e 's|@arch@|$(host_arch)|'\
-            $< > $@
-	$(AT)touch $@
-
-define check_or_remove_cached
-  mkdir -p $(BASE_CACHE)/$(host)/$(package) && cd $(BASE_CACHE)/$(host)/$(package); \
-  $(build_SHA256SUM) -c $($(package)_cached_checksum) >/dev/null 2>/dev/null || \
-  ( rm -f $($(package)_cached_checksum); \
-    if test -f "$($(package)_cached)"; then echo "Checksum mismatch for $(package). Forcing rebuild.."; rm -f $($(package)_cached_checksum) $($(package)_cached); fi )
-endef
-
-define check_or_remove_sources
-  mkdir -p $($(package)_source_dir); cd $($(package)_source_dir); \
-  test -f $($(package)_fetched) && ( $(build_SHA256SUM) -c $($(package)_fetched) >/dev/null 2>/dev/null || \
-    ( echo "Checksum missing or mismatched for $(package) source. Forcing re-download."; \
-      rm -f $($(package)_all_sources) $($(1)_fetched))) || true
-endef
-
-check-packages:
-	@$(foreach package,$(all_packages),$(call check_or_remove_cached,$(package));)
-check-sources:
-	@$(foreach package,$(all_packages),$(call check_or_remove_sources,$(package));)
-
-$(host_prefix)/share/config.site: check-packages
-$(host_prefix)/share/toolchain.cmake: check-packages
-
-check-packages: check-sources
-
-install: check-packages $(host_prefix)/share/config.site
-install: check-packages $(host_prefix)/share/toolchain.cmake
-
-download-one: check-sources $(all_sources)
-
-download-osx:
-	@$(MAKE) -s HOST=x86_64-apple-darwin11 download-one
-download-linux:
-	@$(MAKE) -s HOST=x86_64-unknown-linux-gnu download-one
-download-win:
-	@$(MAKE) -s HOST=x86_64-w64-mingw32 download-one
-download: download-osx download-linux download-win
-
- $(foreach package,$(all_packages),$(eval $(call ext_add_stages,$(package))))
-
-.PHONY: install cached download-one download-osx download-linux download-win download check-packages check-sources

contrib/depends/README.md

@@ -1,83 +0,0 @@
-### Usage
-
-To build dependencies for the current arch+OS:
-
-```bash
-make
-```
-
-To build for another arch/OS:
-
-```bash
-make HOST=host-platform-triplet
-```
-
-For example:
-
-```bash
-make HOST=x86_64-w64-mingw32 -j4
-```
-
-A toolchain will be generated that's suitable for plugging into Monero's
-cmake. In the above example, a dir named x86_64-w64-mingw32 will be
-created. To use it for Monero:
-
-```bash
-cmake -DCMAKE_TOOLCHAIN=`pwd`/contrib/depends/x86_64-w64-mingw32
-```
-
-Common `host-platform-triplets` for cross compilation are:
-
-- `i686-w64-mingw32` for Win32
-- `x86_64-w64-mingw32` for Win64
-- `x86_64-apple-darwin11` for MacOSX
-- `arm-linux-gnueabihf` for Linux ARM 32 bit
-- `aarch64-linux-gnu` for Linux ARM 64 bit
-- `riscv64-linux-gnu` for Linux RISCV 64 bit
-
-No other options are needed, the paths are automatically configured.
-
-Dependency Options:
-The following can be set when running make: make FOO=bar
-
-```
-SOURCES_PATH: downloaded sources will be placed here
-BASE_CACHE: built packages will be placed here
-SDK_PATH: Path where sdk's can be found (used by OSX)
-FALLBACK_DOWNLOAD_PATH: If a source file can't be fetched, try here before giving up
-DEBUG: disable some optimizations and enable more runtime checking
-HOST_ID_SALT: Optional salt to use when generating host package ids
-BUILD_ID_SALT: Optional salt to use when generating build package ids
-```
-
-Additional targets:
-
-```
-download: run 'make download' to fetch all sources without building them
-download-osx: run 'make download-osx' to fetch all sources needed for osx builds
-download-win: run 'make download-win' to fetch all sources needed for win builds
-download-linux: run 'make download-linux' to fetch all sources needed for linux builds
-```
-
-#Darwin (macos) builds:
-
-To build with the x86_64-apple-darwin11 you require the mac os developer tools in MacOSX10.11.sdk. 
-Download it from apple, or search for it on github. Create a new directoty called SDKs in this
-directory and place the entire MacOSX10.11.sdk folder in it. The depends build will then pick it up automatically
-(without requiring SDK_PATH). 
-
-
-#Mingw builds
-
-Building for 32/64bit mingw requires switching alternatives to a posix mode
-
-```bash
-update-alternatives --set x86_64-w64-mingw32-g++ x86_64-w64-mingw32-g++-posix
-update-alternatives --set x86_64-w64-mingw32-gcc x86_64-w64-mingw32-gcc-posix
-```
-
-### Other documentation
-
-- [description.md](description.md): General description of the depends system
-- [packages.md](packages.md): Steps for adding packages
-

contrib/depends/builders/darwin.mk

@@ -1,22 +0,0 @@
-build_darwin_CC: = $(shell xcrun -f clang)
-build_darwin_CXX: = $(shell xcrun -f clang++)
-build_darwin_AR: = $(shell xcrun -f ar)
-build_darwin_RANLIB: = $(shell xcrun -f ranlib)
-build_darwin_STRIP: = $(shell xcrun -f strip)
-build_darwin_OTOOL: = $(shell xcrun -f otool)
-build_darwin_NM: = $(shell xcrun -f nm)
-build_darwin_INSTALL_NAME_TOOL:=$(shell xcrun -f install_name_tool)
-build_darwin_SHA256SUM = shasum -a 256
-build_darwin_DOWNLOAD = curl --location --fail --connect-timeout $(DOWNLOAD_CONNECT_TIMEOUT) --retry $(DOWNLOAD_RETRIES) -o
-
-#darwin host on darwin builder. overrides darwin host preferences.
-darwin_CC=$(shell xcrun -f clang) -mmacosx-version-min=$(OSX_MIN_VERSION)
-darwin_CXX:=$(shell xcrun -f clang++) -mmacosx-version-min=$(OSX_MIN_VERSION) -stdlib=libc++
-darwin_AR:=$(shell xcrun -f ar)
-darwin_RANLIB:=$(shell xcrun -f ranlib)
-darwin_STRIP:=$(shell xcrun -f strip)
-darwin_LIBTOOL:=$(shell xcrun -f libtool)
-darwin_OTOOL:=$(shell xcrun -f otool)
-darwin_NM:=$(shell xcrun -f nm)
-darwin_INSTALL_NAME_TOOL:=$(shell xcrun -f install_name_tool)
-darwin_native_toolchain=

contrib/depends/builders/default.mk

@@ -1,20 +0,0 @@
-default_build_CC = gcc
-default_build_CXX = g++
-default_build_AR = ar
-default_build_RANLIB = ranlib
-default_build_STRIP = strip
-default_build_NM = nm
-default_build_OTOOL = otool
-default_build_INSTALL_NAME_TOOL = install_name_tool
-
-define add_build_tool_func
-build_$(build_os)_$1 ?= $$(default_build_$1)
-build_$(build_arch)_$(build_os)_$1 ?= $$(build_$(build_os)_$1)
-build_$1=$$(build_$(build_arch)_$(build_os)_$1)
-endef
-$(foreach var,CC CXX AR RANLIB NM STRIP SHA256SUM DOWNLOAD OTOOL INSTALL_NAME_TOOL,$(eval $(call add_build_tool_func,$(var))))
-define add_build_flags_func
-build_$(build_arch)_$(build_os)_$1 += $(build_$(build_os)_$1)
-build_$1=$$(build_$(build_arch)_$(build_os)_$1)
-endef
-$(foreach flags, CFLAGS CXXFLAGS ARFLAGS LDFLAGS, $(eval $(call add_build_flags_func,$(flags))))

contrib/depends/builders/linux.mk

@@ -1,2 +0,0 @@
-build_linux_SHA256SUM = sha256sum
-build_linux_DOWNLOAD = curl --location --fail --connect-timeout $(DOWNLOAD_CONNECT_TIMEOUT) --retry $(DOWNLOAD_RETRIES) -o

contrib/depends/config.site.in

@@ -1,81 +0,0 @@
-depends_prefix="`dirname ${ac_site_file}`/.."
-
-cross_compiling=maybe
-host_alias=@HOST@
-ac_tool_prefix=${host_alias}-
-
-if test -z $with_boost; then
-  with_boost=$depends_prefix
-fi
-if test -z $with_qt_plugindir; then
-  with_qt_plugindir=$depends_prefix/plugins
-fi
-if test -z $with_qt_translationdir; then
-  with_qt_translationdir=$depends_prefix/translations
-fi
-
-if test x@host_os@ = xdarwin; then
-  BREW=no
-  PORT=no
-fi
-
-if test x@host_os@ = xmingw32; then
-  if test -z $with_qt_incdir; then
-    with_qt_incdir=$depends_prefix/include
-  fi
-  if test -z $with_qt_libdir; then
-    with_qt_libdir=$depends_prefix/lib
-  fi
-fi
-
-PATH=$depends_prefix/native/bin:$PATH
-PKG_CONFIG="`which pkg-config` --static"
-
-# These two need to remain exported because pkg-config does not see them
-# otherwise. That means they must be unexported at the end of configure.ac to
-# avoid ruining the cache. Sigh.
-export PKG_CONFIG_PATH=$depends_prefix/share/pkgconfig:$depends_prefix/lib/pkgconfig
-if test -z "@allow_host_packages@"; then
-  export PKGCONFIG_LIBDIR=
-fi
-
-CPPFLAGS="-I$depends_prefix/include/ $CPPFLAGS"
-LDFLAGS="-L$depends_prefix/lib $LDFLAGS"
-
-CC="@CC@"
-CXX="@CXX@"
-OBJC="${CC}"
-CCACHE=$depends_prefix/native/bin/ccache
-PYTHONPATH=$depends_prefix/native/lib/python/dist-packages:$PYTHONPATH
-
-if test -n "@AR@"; then
-  AR=@AR@
-  ac_cv_path_ac_pt_AR=${AR}
-fi
-
-if test -n "@RANLIB@"; then
-  RANLIB=@RANLIB@
-  ac_cv_path_ac_pt_RANLIB=${RANLIB}
-fi
-
-if test -n "@NM@"; then
-  NM=@NM@
-  ac_cv_path_ac_pt_NM=${NM}
-fi
-
-if test -n "@debug@"; then
-  enable_reduce_exports=no
-fi
-
-if test -n "@CFLAGS@"; then
-  CFLAGS="@CFLAGS@ $CFLAGS"
-fi
-if test -n "@CXXFLAGS@"; then
-  CXXFLAGS="@CXXFLAGS@ $CXXFLAGS"
-fi
-if test -n "@CPPFLAGS@"; then
-  CPPFLAGS="@CPPFLAGS@ $CPPFLAGS"
-fi
-if test -n "@LDFLAGS@"; then
-  LDFLAGS="@LDFLAGS@ $LDFLAGS"
-fi

contrib/depends/description.md

@@ -1,53 +0,0 @@
-This is a system of building and caching dependencies necessary for building Bitcoin. 
-There are several features that make it different from most similar systems:
-
-### It is designed to be builder and host agnostic
-
-In theory, binaries for any target OS/architecture can be created, from a
-builder running any OS/architecture. In practice, build-side tools must be
-specified when the defaults don't fit, and packages must be amended to work
-on new hosts. For now, a build architecture of x86_64 is assumed, either on
-Linux or OSX.
-
-### No reliance on timestamps
-
-File presence is used to determine what needs to be built. This makes the
-results distributable and easily digestable by automated builders.
-
-### Each build only has its specified dependencies available at build-time.
-
-For each build, the sysroot is wiped and the (recursive) dependencies are
-installed. This makes each build deterministic, since there will never be any
-unknown files available to cause side-effects.
-
-### Each package is cached and only rebuilt as needed.
-
-Before building, a unique build-id is generated for each package. This id
-consists of a hash of all files used to build the package (Makefiles, packages,
-etc), and as well as a hash of the same data for each recursive dependency. If
-any portion of a package's build recipe changes, it will be rebuilt as well as
-any other package that depends on it. If any of the main makefiles (Makefile, 
-funcs.mk, etc) are changed, all packages will be rebuilt. After building, the
-results are cached into a tarball that can be re-used and distributed.
-
-### Package build results are (relatively) deterministic.
-
-Each package is configured and patched so that it will yield the same
-build-results with each consequent build, within a reasonable set of
-constraints. Some things like timestamp insertion are unavoidable, and are
-beyond the scope of this system. Additionally, the toolchain itself must be
-capable of deterministic results. When revisions are properly bumped, a cached
-build should represent an exact single payload.
-
-### Sources are fetched and verified automatically
-
-Each package must define its source location and checksum. The build will fail
-if the fetched source does not match. Sources may be pre-seeded and/or cached
-as desired.
-
-### Self-cleaning
-
-Build and staging dirs are wiped after use, and any previous version of a
-cached result is removed following a successful build. Automated builders
-should be able to build each revision and store the results with no further
-intervention.

contrib/depends/funcs.mk

@@ -1,262 +0,0 @@
-define int_vars
-#Set defaults for vars which may be overridden per-package
-$(1)_cc=$($($(1)_type)_CC)
-$(1)_cxx=$($($(1)_type)_CXX)
-$(1)_objc=$($($(1)_type)_OBJC)
-$(1)_objcxx=$($($(1)_type)_OBJCXX)
-$(1)_ar=$($($(1)_type)_AR)
-$(1)_ranlib=$($($(1)_type)_RANLIB)
-$(1)_libtool=$($($(1)_type)_LIBTOOL)
-$(1)_nm=$($($(1)_type)_NM)
-$(1)_cflags=$($($(1)_type)_CFLAGS) $($($(1)_type)_$(release_type)_CFLAGS)
-$(1)_cxxflags=$($($(1)_type)_CXXFLAGS) $($($(1)_type)_$(release_type)_CXXFLAGS)
-$(1)_arflags=$($($(1)_type)_ARFLAGS) $($($(1)_type)_$(release_type)_ARFLAGS)
-$(1)_ldflags=$($($(1)_type)_LDFLAGS) $($($(1)_type)_$(release_type)_LDFLAGS) -L$($($(1)_type)_prefix)/lib
-$(1)_cppflags=$($($(1)_type)_CPPFLAGS) $($($(1)_type)_$(release_type)_CPPFLAGS) -I$($($(1)_type)_prefix)/include
-$(1)_recipe_hash:=
-endef
-
-define int_get_all_dependencies
-$(sort $(foreach dep,$(2),$(2) $(call int_get_all_dependencies,$(1),$($(dep)_dependencies))))
-endef
-
-define fetch_file_inner
-    ( mkdir -p $$($(1)_download_dir) && echo Fetching $(3) from $(2) && \
-    $(build_DOWNLOAD) "$$($(1)_download_dir)/$(4).temp" "$(2)/$(3)" && \
-    echo "$(5)  $$($(1)_download_dir)/$(4).temp" > $$($(1)_download_dir)/.$(4).hash && \
-    $(build_SHA256SUM) -c $$($(1)_download_dir)/.$(4).hash && \
-    mv $$($(1)_download_dir)/$(4).temp $$($(1)_source_dir)/$(4) && \
-    rm -rf $$($(1)_download_dir) )
-endef
-
-define fetch_file
-    ( test -f $$($(1)_source_dir)/$(4) || \
-    ( $(call fetch_file_inner,$(1),$(2),$(3),$(4),$(5)) || \
-      $(call fetch_file_inner,$(1),$(FALLBACK_DOWNLOAD_PATH),$(3),$(4),$(5))))
-endef
-
-define int_get_build_recipe_hash
-$(eval $(1)_all_file_checksums:=$(shell $(build_SHA256SUM) $(meta_depends) packages/$(1).mk $(addprefix $(PATCHES_PATH)/$(1)/,$($(1)_patches)) | cut -d" " -f1))
-$(eval $(1)_recipe_hash:=$(shell echo -n "$($(1)_all_file_checksums)" | $(build_SHA256SUM) | cut -d" " -f1))
-endef
-
-define int_get_build_id
-$(eval $(1)_dependencies += $($(1)_$(host_arch)_$(host_os)_dependencies) $($(1)_$(host_os)_dependencies))
-$(eval $(1)_all_dependencies:=$(call int_get_all_dependencies,$(1),$($($(1)_type)_native_toolchain) $($(1)_dependencies)))
-$(foreach dep,$($(1)_all_dependencies),$(eval $(1)_build_id_deps+=$(dep)-$($(dep)_version)-$($(dep)_recipe_hash)))
-$(eval $(1)_build_id_long:=$(1)-$($(1)_version)-$($(1)_recipe_hash)-$(release_type) $($(1)_build_id_deps) $($($(1)_type)_id_string))
-$(eval $(1)_build_id:=$(shell echo -n "$($(1)_build_id_long)" | $(build_SHA256SUM) | cut -c-$(HASH_LENGTH)))
-final_build_id_long+=$($(package)_build_id_long)
-
-#compute package-specific paths
-$(1)_build_subdir?=.
-$(1)_download_file?=$($(1)_file_name)
-$(1)_source_dir:=$(SOURCES_PATH)
-$(1)_source:=$$($(1)_source_dir)/$($(1)_file_name)
-$(1)_staging_dir=$(base_staging_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)
-$(1)_staging_prefix_dir:=$$($(1)_staging_dir)$($($(1)_type)_prefix)
-$(1)_extract_dir:=$(base_build_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)
-$(1)_download_dir:=$(base_download_dir)/$(1)-$($(1)_version)
-$(1)_build_dir:=$$($(1)_extract_dir)/$$($(1)_build_subdir)
-$(1)_cached_checksum:=$(BASE_CACHE)/$(host)/$(1)/$(1)-$($(1)_version)-$($(1)_build_id).tar.gz.hash
-$(1)_patch_dir:=$(base_build_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)/.patches-$($(1)_build_id)
-$(1)_prefixbin:=$($($(1)_type)_prefix)/bin/
-$(1)_cached:=$(BASE_CACHE)/$(host)/$(1)/$(1)-$($(1)_version)-$($(1)_build_id).tar.gz
-$(1)_all_sources=$($(1)_file_name) $($(1)_extra_sources)
-
-#stamps
-$(1)_fetched=$(SOURCES_PATH)/download-stamps/.stamp_fetched-$(1)-$($(1)_file_name).hash
-$(1)_extracted=$$($(1)_extract_dir)/.stamp_extracted
-$(1)_preprocessed=$$($(1)_extract_dir)/.stamp_preprocessed
-$(1)_cleaned=$$($(1)_extract_dir)/.stamp_cleaned
-$(1)_built=$$($(1)_build_dir)/.stamp_built
-$(1)_configured=$$($(1)_build_dir)/.stamp_configured
-$(1)_staged=$$($(1)_staging_dir)/.stamp_staged
-$(1)_postprocessed=$$($(1)_staging_prefix_dir)/.stamp_postprocessed
-$(1)_download_path_fixed=$(subst :,\:,$$($(1)_download_path))
-
-
-#default commands
-$(1)_fetch_cmds ?= $(call fetch_file,$(1),$(subst \:,:,$$($(1)_download_path_fixed)),$$($(1)_download_file),$($(1)_file_name),$($(1)_sha256_hash))
-$(1)_extract_cmds ?= mkdir -p $$($(1)_extract_dir) && echo "$$($(1)_sha256_hash)  $$($(1)_source)" > $$($(1)_extract_dir)/.$$($(1)_file_name).hash &&  $(build_SHA256SUM) -c $$($(1)_extract_dir)/.$$($(1)_file_name).hash && tar --strip-components=1 -xf $$($(1)_source)
-$(1)_preprocess_cmds ?=
-$(1)_build_cmds ?=
-$(1)_config_cmds ?=
-$(1)_stage_cmds ?=
-$(1)_set_vars ?=
-
-
-all_sources+=$$($(1)_fetched)
-endef
-#$(foreach dep_target,$($(1)_all_dependencies),$(eval $(1)_dependency_targets=$($(dep_target)_cached)))
-
-
-define int_config_attach_build_config
-$(eval $(call $(1)_set_vars,$(1)))
-$(1)_cflags+=$($(1)_cflags_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_arch)) $($(1)_cflags_$(host_arch)_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_os)) $($(1)_cflags_$(host_os)_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_arch)_$(host_os)) $($(1)_cflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_cxxflags+=$($(1)_cxxflags_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_arch)) $($(1)_cxxflags_$(host_arch)_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_os)) $($(1)_cxxflags_$(host_os)_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_arch)_$(host_os)) $($(1)_cxxflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_arflags+=$($(1)_arflags_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_arch)) $($(1)_arflags_$(host_arch)_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_os)) $($(1)_arflags_$(host_os)_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_arch)_$(host_os)) $($(1)_arflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_cppflags+=$($(1)_cppflags_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_arch)) $($(1)_cppflags_$(host_arch)_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_os)) $($(1)_cppflags_$(host_os)_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_arch)_$(host_os)) $($(1)_cppflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_ldflags+=$($(1)_ldflags_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_arch)) $($(1)_ldflags_$(host_arch)_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_os)) $($(1)_ldflags_$(host_os)_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_arch)_$(host_os)) $($(1)_ldflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_build_opts+=$$($(1)_build_opts_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_arch)) $$($(1)_build_opts_$(host_arch)_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_os)) $$($(1)_build_opts_$(host_os)_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_arch)_$(host_os)) $$($(1)_build_opts_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_opts+=$$($(1)_config_opts_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_arch)) $$($(1)_config_opts_$(host_arch)_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_os)) $$($(1)_config_opts_$(host_os)_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_arch)_$(host_os)) $$($(1)_config_opts_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_env+=$$($(1)_config_env_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_arch)) $($(1)_config_env_$(host_arch)_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_os)) $($(1)_config_env_$(host_os)_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_arch)_$(host_os)) $($(1)_config_env_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_env+=PKG_CONFIG_LIBDIR=$($($(1)_type)_prefix)/lib/pkgconfig
-$(1)_config_env+=PKG_CONFIG_PATH=$($($(1)_type)_prefix)/share/pkgconfig
-$(1)_config_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_build_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_stage_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_autoconf=./configure --host=$($($(1)_type)_host) --disable-dependency-tracking --prefix=$($($(1)_type)_prefix) $$($(1)_config_opts) CC="$$($(1)_cc)" CXX="$$($(1)_cxx)"
-
-ifneq ($($(1)_nm),)
-$(1)_autoconf += NM="$$($(1)_nm)"
-endif
-ifneq ($($(1)_ranlib),)
-$(1)_autoconf += RANLIB="$$($(1)_ranlib)"
-endif
-ifneq ($($(1)_ar),)
-$(1)_autoconf += AR="$$($(1)_ar)"
-endif
-ifneq ($($(1)_arflags),)
-$(1)_autoconf += ARFLAGS="$$($(1)_arflags)"
-endif
-ifneq ($($(1)_cflags),)
-$(1)_autoconf += CFLAGS="$$($(1)_cflags)"
-endif
-ifneq ($($(1)_cxxflags),)
-$(1)_autoconf += CXXFLAGS="$$($(1)_cxxflags)"
-endif
-ifneq ($($(1)_cppflags),)
-$(1)_autoconf += CPPFLAGS="$$($(1)_cppflags)"
-endif
-ifneq ($($(1)_ldflags),)
-$(1)_autoconf += LDFLAGS="$$($(1)_ldflags)"
-endif
-endef
-
-define int_add_cmds
-$($(1)_fetched):
-	$(AT)mkdir -p $$(@D) $(SOURCES_PATH)
-	$(AT)rm -f $$@
-	$(AT)touch $$@
-	$(AT)cd $$(@D); $(call $(1)_fetch_cmds,$(1))
-	$(AT)cd $($(1)_source_dir); $(foreach source,$($(1)_all_sources),$(build_SHA256SUM) $(source) >> $$(@);)
-	$(AT)touch $$@
-$($(1)_extracted): | $($(1)_fetched)
-	$(AT)echo Extracting $(1)...
-	$(AT)mkdir -p $$(@D)
-	$(AT)cd $$(@D); $(call $(1)_extract_cmds,$(1))
-	$(AT)touch $$@
-$($(1)_preprocessed): | $($(1)_dependencies) $($(1)_extracted)
-	$(AT)echo Preprocessing $(1)...
-	$(AT)mkdir -p $$(@D) $($(1)_patch_dir)
-	$(AT)$(foreach patch,$($(1)_patches),cd $(PATCHES_PATH)/$(1); cp $(patch) $($(1)_patch_dir) ;)
-	$(AT)cd $$(@D); $(call $(1)_preprocess_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_configured): | $($(1)_preprocessed)
-	$(AT)echo Configuring $(1)...
-	$(AT)rm -rf $(host_prefix); mkdir -p $(host_prefix)/lib; cd $(host_prefix); $(foreach package,$($(1)_all_dependencies), tar xf $($(package)_cached); )
-	$(AT)mkdir -p $$(@D)
-	$(AT)+cd $$(@D); $($(1)_config_env) $(call $(1)_config_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_built): | $($(1)_configured)
-	$(AT)echo Building $(1)...
-	$(AT)mkdir -p $$(@D)
-	$(AT)+cd $$(@D); $($(1)_build_env) $(call $(1)_build_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_staged): | $($(1)_built)
-	$(AT)echo Staging $(1)...
-	$(AT)mkdir -p $($(1)_staging_dir)/$(host_prefix)
-	$(AT)cd $($(1)_build_dir); $($(1)_stage_env) $(call $(1)_stage_cmds, $(1))
-	$(AT)rm -rf $($(1)_extract_dir)
-	$(AT)touch $$@
-$($(1)_postprocessed): | $($(1)_staged)
-	$(AT)echo Postprocessing $(1)...
-	$(AT)cd $($(1)_staging_prefix_dir); $(call $(1)_postprocess_cmds)
-	$(AT)touch $$@
-$($(1)_cached): | $($(1)_dependencies) $($(1)_postprocessed)
-	$(AT)echo Caching $(1)...
-	$(AT)cd $$($(1)_staging_dir)/$(host_prefix); find . | sort | tar --no-recursion -czf $$($(1)_staging_dir)/$$(@F) -T -
-	$(AT)mkdir -p $$(@D)
-	$(AT)rm -rf $$(@D) && mkdir -p $$(@D)
-	$(AT)mv $$($(1)_staging_dir)/$$(@F) $$(@)
-	$(AT)rm -rf $($(1)_staging_dir)
-$($(1)_cached_checksum): $($(1)_cached)
-	$(AT)cd $$(@D); $(build_SHA256SUM) $$(<F) > $$(@)
-
-.PHONY: $(1)
-$(1): | $($(1)_cached_checksum)
-.SECONDARY: $($(1)_cached) $($(1)_postprocessed) $($(1)_staged) $($(1)_built) $($(1)_configured) $($(1)_preprocessed) $($(1)_extracted) $($(1)_fetched)
-
-endef
-
-stages = fetched extracted preprocessed configured built staged postprocessed cached cached_checksum
-
-define ext_add_stages
-$(foreach stage,$(stages),
-          $(1)_$(stage): $($(1)_$(stage))
-          .PHONY: $(1)_$(stage))
-endef
-
-# These functions create the build targets for each package. They must be
-# broken down into small steps so that each part is done for all packages
-# before moving on to the next step. Otherwise, a package's info
-# (build-id for example) would only be available to another package if it
-# happened to be computed already.
-
-#set the type for host/build packages.
-$(foreach native_package,$(native_packages),$(eval $(native_package)_type=build))
-$(foreach package,$(packages),$(eval $(package)_type=$(host_arch)_$(host_os)))
-
-#set overridable defaults
-$(foreach package,$(all_packages),$(eval $(call int_vars,$(package))))
-
-#include package files
-$(foreach package,$(all_packages),$(eval include packages/$(package).mk))
-
-#compute a hash of all files that comprise this package's build recipe
-$(foreach package,$(all_packages),$(eval $(call int_get_build_recipe_hash,$(package))))
-
-#generate a unique id for this package, incorporating its dependencies as well
-$(foreach package,$(all_packages),$(eval $(call int_get_build_id,$(package))))
-
-#compute final vars after reading package vars
-$(foreach package,$(all_packages),$(eval $(call int_config_attach_build_config,$(package))))
-
-#create build targets
-$(foreach package,$(all_packages),$(eval $(call int_add_cmds,$(package))))
-
-#special exception: if a toolchain package exists, all non-native packages depend on it
-$(foreach package,$(packages),$(eval $($(package)_unpacked): |$($($(host_arch)_$(host_os)_native_toolchain)_cached) ))

contrib/depends/hosts/android.mk

@@ -1,22 +0,0 @@
-ANDROID_API=21
-
-ifeq ($(host_arch),arm)
-host_toolchain=arm-linux-androideabi-
-endif
-
-android_CC=$(host_toolchain)clang
-android_CXX=$(host_toolchain)clang++
-android_RANLIB=:
-
-android_CFLAGS=-pipe
-android_CXXFLAGS=$(android_CFLAGS)
-android_ARFLAGS=crsD
-
-android_release_CFLAGS=-O2
-android_release_CXXFLAGS=$(android_release_CFLAGS)
-
-android_debug_CFLAGS=-g -O0
-android_debug_CXXFLAGS=$(android_debug_CFLAGS)
-
-android_native_toolchain=android_ndk
-

contrib/depends/hosts/darwin.mk

@@ -1,18 +0,0 @@
-OSX_MIN_VERSION=10.8
-OSX_SDK_VERSION=10.11
-OSX_SDK=$(SDK_PATH)/MacOSX$(OSX_SDK_VERSION).sdk
-LD64_VERSION=253.9
-darwin_CC=clang -target $(host) -mmacosx-version-min=$(OSX_MIN_VERSION) --sysroot $(OSX_SDK) -mlinker-version=$(LD64_VERSION) -B $(host_prefix)/native/bin
-darwin_CXX=clang++ -target $(host) -mmacosx-version-min=$(OSX_MIN_VERSION) --sysroot $(OSX_SDK) -mlinker-version=$(LD64_VERSION) -stdlib=libc++ -B $(host_prefix)/native/bin
-
-darwin_CFLAGS=-pipe
-darwin_CXXFLAGS=$(darwin_CFLAGS)
-darwin_ARFLAGS=cr
-
-darwin_release_CFLAGS=-O1
-darwin_release_CXXFLAGS=$(darwin_release_CFLAGS)
-
-darwin_debug_CFLAGS=-O1
-darwin_debug_CXXFLAGS=$(darwin_debug_CFLAGS)
-
-darwin_native_toolchain=native_cctools

contrib/depends/hosts/default.mk

@@ -1,26 +0,0 @@
-default_host_CC = $(host_toolchain)gcc
-default_host_CXX = $(host_toolchain)g++
-default_host_AR = $(host_toolchain)ar
-default_host_RANLIB = $(host_toolchain)ranlib
-default_host_STRIP = $(host_toolchain)strip
-default_host_LIBTOOL = $(host_toolchain)libtool
-default_host_INSTALL_NAME_TOOL = $(host_toolchain)install_name_tool
-default_host_OTOOL = $(host_toolchain)otool
-default_host_NM = $(host_toolchain)nm
-
-define add_host_tool_func
-$(host_os)_$1?=$$(default_host_$1)
-$(host_arch)_$(host_os)_$1?=$$($(host_os)_$1)
-$(host_arch)_$(host_os)_$(release_type)_$1?=$$($(host_os)_$1)
-host_$1=$$($(host_arch)_$(host_os)_$1)
-endef
-
-define add_host_flags_func
-$(host_arch)_$(host_os)_$1 += $($(host_os)_$1)
-$(host_arch)_$(host_os)_$(release_type)_$1 += $($(host_os)_$(release_type)_$1)
-host_$1 = $$($(host_arch)_$(host_os)_$1)
-host_$(release_type)_$1 = $$($(host_arch)_$(host_os)_$(release_type)_$1)
-endef
-
-$(foreach tool,CC CXX AR RANLIB STRIP NM LIBTOOL OTOOL INSTALL_NAME_TOOL,$(eval $(call add_host_tool_func,$(tool))))
-$(foreach flags,CFLAGS CXXFLAGS ARFLAGS CPPFLAGS LDFLAGS, $(eval $(call add_host_flags_func,$(flags))))

contrib/depends/hosts/freebsd.mk

@@ -1,18 +0,0 @@
-freebsd_CC=clang-8
-freebsd_CXX=clang++-8
-freebsd_AR=ar
-freebsd_RANLIB=ranlib
-freebsd_NM=nm
-
-freebsd_CFLAGS=-pipe
-freebsd_CXXFLAGS=$(freebsd_CFLAGS)
-freebsd_ARFLAGS=cr
-
-freebsd_release_CFLAGS=-O2
-freebsd_release_CXXFLAGS=$(freebsd_release_CFLAGS)
-
-freebsd_debug_CFLAGS=-g -O0
-freebsd_debug_CXXFLAGS=$(freebsd_debug_CFLAGS)
-
-freebsd_native_toolchain=freebsd_base
-

contrib/depends/hosts/linux.mk

@@ -1,32 +0,0 @@
-linux_CFLAGS=-pipe
-linux_CXXFLAGS=$(linux_CFLAGS)
-linux_ARFLAGS=cr
-
-linux_release_CFLAGS=-O2
-linux_release_CXXFLAGS=$(linux_release_CFLAGS)
-
-linux_debug_CFLAGS=-O1
-linux_debug_CXXFLAGS=$(linux_debug_CFLAGS)
-
-linux_debug_CPPFLAGS=-D_GLIBCXX_DEBUG -D_GLIBCXX_DEBUG_PEDANTIC
-
-ifeq (86,$(findstring 86,$(build_arch)))
-i686_linux_CC=gcc -m32
-i686_linux_CXX=g++ -m32
-i686_linux_AR=ar
-i686_linux_RANLIB=ranlib
-i686_linux_NM=nm
-i686_linux_STRIP=strip
-
-x86_64_linux_CC=gcc -m64
-x86_64_linux_CXX=g++ -m64
-x86_64_linux_AR=ar
-x86_64_linux_RANLIB=ranlib
-x86_64_linux_NM=nm
-x86_64_linux_STRIP=strip
-else
-i686_linux_CC=$(default_host_CC) -m32
-i686_linux_CXX=$(default_host_CXX) -m32
-x86_64_linux_CC=$(default_host_CC) -m64
-x86_64_linux_CXX=$(default_host_CXX) -m64
-endif

contrib/depends/hosts/mingw32.mk

@@ -1,11 +0,0 @@
-mingw32_CFLAGS=-pipe
-mingw32_CXXFLAGS=$(mingw32_CFLAGS)
-mingw32_ARFLAGS=cr
-
-mingw32_release_CFLAGS=-O2
-mingw32_release_CXXFLAGS=$(mingw32_release_CFLAGS)
-
-mingw32_debug_CFLAGS=-O1
-mingw32_debug_CXXFLAGS=$(mingw32_debug_CFLAGS)
-
-mingw32_debug_CPPFLAGS=-D_GLIBCXX_DEBUG -D_GLIBCXX_DEBUG_PEDANTIC

contrib/depends/packages.md

@@ -1,165 +0,0 @@
-Each recipe consists of 3 main parts: defining identifiers, setting build
-variables, and defining build commands.
-
-The package "mylib" will be used here as an example
-
-General tips:
-- mylib_foo is written as $(package)_foo in order to make recipes more similar.
-
-## Identifiers
-Each package is required to define at least these variables:
-
-```
-$(package)_version:
-Version of the upstream library or program. If there is no version, a
-placeholder such as 1.0 can be used.
-
-$(package)_download_path:
-Location of the upstream source, without the file-name. Usually http or
-ftp.
-
-$(package)_file_name:
-The upstream source filename available at the download path.
-
-$(package)_sha256_hash:
-The sha256 hash of the upstream file
-```
-
-These variables are optional:
-
-```
-$(package)_build_subdir:
-cd to this dir before running configure/build/stage commands.
-
-$(package)_download_file:
-The file-name of the upstream source if it differs from how it should be
-stored locally. This can be used to avoid storing file-names with strange
-characters.
-
-$(package)_dependencies:
-Names of any other packages that this one depends on.
-
-$(package)_patches:
-Filenames of any patches needed to build the package
-
-$(package)_extra_sources:
-Any extra files that will be fetched via $(package)_fetch_cmds. These are
-specified so that they can be fetched and verified via 'make download'.
-```
-
-
-## Build Variables:
-After defining the main identifiers, build variables may be added or customized
-before running the build commands. They should be added to a function called
-$(package)_set_vars. For example:
-
-```
-define $(package)_set_vars
-...
-endef
-```
-
-Most variables can be prefixed with the host, architecture, or both, to make
-the modifications specific to that case. For example:
-
-```
-Universal:     $(package)_cc=gcc
-Linux only:    $(package)_linux_cc=gcc
-x86_64 only:       $(package)_x86_64_cc = gcc
-x86_64 linux only: $(package)_x86_64_linux_cc = gcc
-```
-
-These variables may be set to override or append their default values.
-
-```
-$(package)_cc
-$(package)_cxx
-$(package)_objc
-$(package)_objcxx
-$(package)_ar
-$(package)_ranlib
-$(package)_libtool
-$(package)_nm
-$(package)_cflags
-$(package)_cxxflags
-$(package)_ldflags
-$(package)_cppflags
-$(package)_config_env
-$(package)_build_env
-$(package)_stage_env
-$(package)_build_opts
-$(package)_config_opts
-```
-
-The `*_env` variables are used to add environment variables to the respective
-commands.
-
-Many variables respect a debug/release suffix as well, in order to use them for
-only the appropriate build config. For example:
-
-```
-$(package)_cflags_release = -O3
-$(package)_cflags_i686_debug = -g
-$(package)_config_opts_release = --disable-debug
-```
-
-These will be used in addition to the options that do not specify
-debug/release. All builds are considered to be release unless DEBUG=1 is set by
-the user. Other variables may be defined as needed.
-
-## Build commands:
-
-For each build, a unique build dir and staging dir are created. For example,
-`work/build/mylib/1.0-1adac830f6e` and `work/staging/mylib/1.0-1adac830f6e`.
-
-The following build commands are available for each recipe:
-
-```
-$(package)_fetch_cmds:
-Runs from: build dir
-Fetch the source file. If undefined, it will be fetched and verified
-against its hash.
-
-$(package)_extract_cmds:
-Runs from: build dir
-Verify the source file against its hash and extract it. If undefined, the
-source is assumed to be a tarball.
-
-$(package)_preprocess_cmds:
-Runs from: build dir/$(package)_build_subdir
-Preprocess the source as necessary. If undefined, does nothing.
-
-$(package)_config_cmds:
-Runs from: build dir/$(package)_build_subdir
-Configure the source. If undefined, does nothing.
-
-$(package)_build_cmds:
-Runs from: build dir/$(package)_build_subdir
-Build the source. If undefined, does nothing.
-
-$(package)_stage_cmds:
-Runs from: build dir/$(package)_build_subdir
-Stage the build results. If undefined, does nothing.
-```
-
-The following variables are available for each recipe:
-
-```    
-$(1)_staging_dir: package's destination sysroot path
-$(1)_staging_prefix_dir: prefix path inside of the package's staging dir
-$(1)_extract_dir: path to the package's extracted sources
-$(1)_build_dir: path where configure/build/stage commands will be run
-$(1)_patch_dir: path where the package's patches (if any) are found
-```
-
-Notes on build commands:
-
-For packages built with autotools, `$($(package)_autoconf)` can be used in the
-configure step to (usually) correctly configure automatically. Any
-`$($(package)_config_opts`) will be appended.
-
-Most autotools projects can be properly staged using:
-
-```bash
-$(MAKE) DESTDIR=$($(package)_staging_dir) install
-```

contrib/depends/packages/android_ndk.mk

@@ -1,22 +0,0 @@
-package=android_ndk
-$(package)_version=17b
-$(package)_download_path=https://dl.google.com/android/repository/
-$(package)_file_name=android-ndk-r$($(package)_version)-linux-x86_64.zip
-$(package)_sha256_hash=5dfbbdc2d3ba859fed90d0e978af87c71a91a5be1f6e1c40ba697503d48ccecd
-
-define $(package)_set_vars
-$(package)_config_opts_arm=--arch arm
-$(package)_config_opts_aarch64=--arch arm64
-endef
-
-define $(package)_extract_cmds
-  echo $($(package)_sha256_hash) $($(1)_source_dir)/$($(package)_file_name) | sha256sum -c &&\
-  unzip -q $($(1)_source_dir)/$($(package)_file_name)
-endef
-
-define $(package)_stage_cmds
-  android-ndk-r$($(package)_version)/build/tools/make_standalone_toolchain.py --api 21 \
-    --install-dir $(build_prefix) --stl=libc++ $($(package)_config_opts) &&\
-  mv $(build_prefix) $($(package)_staging_dir)/$(host_prefix)
-endef
-

contrib/depends/packages/boost.mk

@@ -1,46 +0,0 @@
-package=boost                                                                                                                                                                                                                      
-$(package)_version=1_64_0
-$(package)_download_path=https://dl.bintray.com/boostorg/release/1.64.0/source/
-$(package)_file_name=$(package)_$($(package)_version).tar.bz2
-$(package)_sha256_hash=7bcc5caace97baa948931d712ea5f37038dbb1c5d89b43ad4def4ed7cb683332
-$(package)_dependencies=libiconv
-$(package)_patches=fix_aroptions.patch
-
-define $(package)_set_vars
-$(package)_config_opts_release=variant=release
-$(package)_config_opts_debug=variant=debug
-$(package)_config_opts=--layout=tagged --build-type=complete --user-config=user-config.jam
-$(package)_config_opts+=threading=multi link=static -sNO_BZIP2=1 -sNO_ZLIB=1
-$(package)_config_opts_linux=threadapi=pthread runtime-link=shared
-$(package)_config_opts_android=threadapi=pthread runtime-link=static target-os=android
-$(package)_config_opts_darwin=--toolset=darwin-4.2.1 runtime-link=shared
-$(package)_config_opts_mingw32=binary-format=pe target-os=windows threadapi=win32 runtime-link=static
-$(package)_config_opts_x86_64_mingw32=address-model=64
-$(package)_config_opts_i686_mingw32=address-model=32
-$(package)_config_opts_i686_linux=address-model=32 architecture=x86
-$(package)_toolset_$(host_os)=gcc
-$(package)_archiver_$(host_os)=$($(package)_ar)
-$(package)_toolset_darwin=darwin
-$(package)_archiver_darwin=$($(package)_libtool)
-$(package)_config_libraries=chrono,filesystem,program_options,system,thread,test,date_time,regex,serialization,locale
-$(package)_cxxflags=-std=c++11
-$(package)_cxxflags_linux=-fPIC
-$(package)_cxxflags_freebsd=-fPIC
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/fix_aroptions.patch &&\
-  echo "using $(boost_toolset_$(host_os)) : : $($(package)_cxx) : <cxxflags>\"$($(package)_cxxflags) $($(package)_cppflags)\" <linkflags>\"$($(package)_ldflags)\" <archiver>\"$(boost_archiver_$(host_os))\" <arflags>\"$($(package)_arflags)\" <striper>\"$(host_STRIP)\"  <ranlib>\"$(host_RANLIB)\" <rc>\"$(host_WINDRES)\" : ;" > user-config.jam
-endef
-
-define $(package)_config_cmds
-  ./bootstrap.sh --without-icu --with-libraries=$(boost_config_libraries)
-endef
-
-define $(package)_build_cmds
-  ./b2 -d2 -j2 -d1 --prefix=$($(package)_staging_prefix_dir) $($(package)_config_opts) stage
-endef
-
-define $(package)_stage_cmds
-  ./b2 -d0 -j4 --prefix=$($(package)_staging_prefix_dir) $($(package)_config_opts) install
-endef

contrib/depends/packages/eudev.mk

@@ -1,29 +0,0 @@
-package=eudev
-$(package)_version=v3.2.6
-$(package)_download_path=https://github.com/gentoo/eudev/archive/
-$(package)_file_name=$($(package)_version).tar.gz
-$(package)_sha256_hash=a96ecb8637667897b8bd4dee4c22c7c5f08b327be45186e912ce6bc768385852
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-gudev --disable-introspection --disable-hwdb --disable-manpages --disable-shared
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_preprocess_cmds
-  cd $($(package)_build_subdir); autoreconf -f -i
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef

contrib/depends/packages/expat.mk

@@ -1,28 +0,0 @@
-package=expat
-$(package)_version=2.2.4
-$(package)_download_path=https://downloads.sourceforge.net/project/expat/expat/$($(package)_version)
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=03ad85db965f8ab2d27328abcf0bc5571af6ec0a414874b2066ee3fdd372019e
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static
-$(package)_config_opts=--disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/freebsd_base.mk

@@ -1,23 +0,0 @@
-package=freebsd_base
-$(package)_version=11.3
-$(package)_download_path=https://download.freebsd.org/ftp/releases/amd64/$($(package)_version)-RELEASE/
-$(package)_download_file=base.txz
-$(package)_file_name=freebsd-base-$($(package)_version).txz
-$(package)_sha256_hash=4599023ac136325b86f2fddeec64c1624daa83657e40b00b2ef944c81463a4ff
-
-define $(package)_extract_cmds
-  echo $($(package)_sha256_hash) $($(1)_source_dir)/$($(package)_file_name) | sha256sum -c &&\
-  tar xf $($(1)_source_dir)/$($(package)_file_name) ./lib/ ./usr/lib/ ./usr/include/
-endef
-
-define $(package)_build_cmds
-  mkdir bin &&\
-  echo "exec /usr/bin/clang-8 -target x86_64-unknown-freebsd$($(package)_version) --sysroot=$(host_prefix)/native $$$$""@" > bin/clang-8 &&\
-  echo "exec /usr/bin/clang++-8 -target x86_64-unknown-freebsd$($(package)_version) --sysroot=$(host_prefix)/native $$$$""@" > bin/clang++-8 &&\
-  chmod 755 bin/*
-endef
-
-define $(package)_stage_cmds
-  mkdir $($(package)_staging_dir)/$(host_prefix)/native &&\
-  mv bin lib usr $($(package)_staging_dir)/$(host_prefix)/native
-endef

contrib/depends/packages/graphviz.mk

@@ -1,30 +0,0 @@
-package=graphviz
-$(package)_version=2.40.1
-$(package)_download_path=www.graphviz.org/pub/graphviz/stable/SOURCES/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=ca5218fade0204d59947126c38439f432853543b0818d9d728c589dfe7f3a421
-
-define $(package)_preprocess_cmds
-  ./autogen.sh
-endef
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-multibye --without-purify --without-curses
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-endef

contrib/depends/packages/gtest.mk

@@ -1,38 +0,0 @@
-package=gtest
-$(package)_version=1.8.1
-$(package)_download_path=https://github.com/google/googletest/archive/
-$(package)_file_name=release-$($(package)_version).tar.gz
-$(package)_sha256_hash=9bf1fe5182a604b4135edc1a425ae356c9ad15e9b23f9f12a02e80184c3a249c
-$(package)_cxxflags=-std=c++11
-$(package)_cxxflags_linux=-fPIC
-
-define $(package)_config_cmds
-  cd googletest && \
-    CC="$(host_prefix)/native/bin/$($(package)_cc)" \
-    CXX="$(host_prefix)/native/bin/$($(package)_cxx)" \
-    AR="$(host_prefix)/native/bin/$($(package)_ar)" \
-    RANLIB="$(host_prefix)/native/bin/$($(package)_ranlib)" \
-    LIBTOOL="$(host_prefix)/native/bin/$($(package)_libtool)" \
-    CXXFLAGS="$($(package)_cxxflags)" \
-    CCFLAGS="$($(package)_ccflags)" \
-    CPPFLAGS="$($(package)_cppflags)" \
-    CFLAGS="$($(package)_cflags) $($(package)_cppflags)" \
-    LDLAGS="$($(package)_ldflags)" \
-  cmake -DCMAKE_INSTALL_PREFIX=$(build_prefix) \
-    -DTOOLCHAIN_PREFIX=$(host_toolchain) \
-    -DCMAKE_AR="$(host_prefix)/native/bin/$($(package)_ar)" \
-    -DCMAKE_RANLIB="$(host_prefix)/native/bin/$($(package)_ranlib)" \
-    -DCMAKE_CXX_FLAGS_DEBUG=ON
-endef
-# -DCMAKE_TOOLCHAIN_FILE=$(HOST)/share/toolchain.cmake
-
-define $(package)_build_cmds
-  cd googletest && CC="$(host_prefix)/native/bin/$($(package)_cc)" $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  mkdir $($(package)_staging_prefix_dir)/lib $($(package)_staging_prefix_dir)/include &&\
-  cp googletest/libgtest.a $($(package)_staging_prefix_dir)/lib/ &&\
-  cp googletest/libgtest_main.a $($(package)_staging_prefix_dir)/lib/ &&\
-  cp -a googletest/include/* $($(package)_staging_prefix_dir)/include/
-endef

contrib/depends/packages/hidapi.mk

@@ -1,35 +0,0 @@
-package=hidapi
-$(package)_version=0.9.0
-$(package)_download_path=https://github.com/libusb/hidapi/archive
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=630ee1834bdd5c5761ab079fd04f463a89585df8fcae51a7bfe4229b1e02a652
-$(package)_linux_dependencies=libusb eudev
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static --disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-$(package)_config_opts_darwin+=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-$(package)_config_opts_linux+=libudev_LIBS="-L$(host_prefix)/lib -ludev"
-$(package)_config_opts_linux+=libudev_CFLAGS=-I$(host_prefix)/include
-$(package)_config_opts_linux+=libusb_LIBS="-L$(host_prefix)/lib -lusb-1.0"
-$(package)_config_opts_linux+=libusb_CFLAGS=-I$(host_prefix)/include/libusb-1.0
-$(package)_config_opts_linux+=--with-pic
-endef
-
-define $(package)_config_cmds
-  ./bootstrap &&\
-  $($(package)_autoconf) $($(package)_config_opts) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/icu4c.mk

@@ -1,27 +0,0 @@
-package=icu4c
-$(package)_version=55.2
-$(package)_download_path=https://github.com/unicode-org/icu/releases/download/release-55-2/
-$(package)_file_name=$(package)-55_2-src.tgz
-$(package)_sha256_hash=eda2aa9f9c787748a2e2d310590720ca8bcc6252adf6b4cfb03b65bef9d66759
-$(package)_patches=icu-001-dont-build-static-dynamic-twice.patch
-
-define $(package)_set_vars
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -DU_USING_ICU_NAMESPACE=0 -DU_STATIC_IMPLEMENTATION -DU_COMBINED_IMPLEMENTATION -fPIC -DENABLE_STATIC=YES -DPGKDATA_MODE=static"
-endef
-
-define $(package)_config_cmds
-  patch -p1 < $($(package)_patch_dir)/icu-001-dont-build-static-dynamic-twice.patch &&\
-  mkdir builda &&\
-  mkdir buildb &&\
-  cd builda &&\
-  sh ../source/runConfigureICU Linux &&\
-  make &&\
-  cd ../buildb &&\
-  sh ../source/runConfigureICU MinGW --enable-static=yes --disable-shared --disable-layout --disable-layoutex --disable-tests --disable-samples --prefix=$(host_prefix) --with-cross-build=`pwd`/../builda &&\
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  cd buildb &&\
-  $(MAKE) $($(package)_build_opts) DESTDIR=$($(package)_staging_dir) install lib/*
-endef

contrib/depends/packages/ldns.mk

@@ -1,34 +0,0 @@
-package=ldns
-$(package)_version=1.6.17
-$(package)_download_path=https://www.nlnetlabs.nl/downloads/ldns/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=8b88e059452118e8949a2752a55ce59bc71fa5bc414103e17f5b6b06f9bcc8cd
-$(package)_dependencies=openssl
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-static --with-drill
-  $(package)_config_opts+=--with-ssl=$(host_prefix)
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_preprocess_cmds
-   cp -f $(BASEDIR)/config.guess $(BASEDIR)/config.sub .
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-h install-lib
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/libICE.mk

@@ -1,23 +0,0 @@
-package=libICE
-$(package)_version=1.0.9
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/lib/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=8f7032f2c1c64352b5423f6b48a8ebdc339cc63064af34d66a6c9aa79759e202
-$(package)_dependencies=xtrans xproto
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-static --disable-docs --disable-specs --without-xsltproc
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/libSM.mk

@@ -1,23 +0,0 @@
-package=libSM
-$(package)_version=1.2.2
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/lib/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=0baca8c9f5d934450a70896c4ad38d06475521255ca63b717a6510fdb6e287bd
-$(package)_dependencies=xtrans xproto libICE
-
-define $(package)_set_vars
-  $(package)_config_opts=--without-libuuid  --without-xsltproc  --disable-docs --disable-static
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/libiconv.mk

@@ -1,35 +0,0 @@
-package=libiconv
-$(package)_version=1.15
-$(package)_download_path=https://ftp.gnu.org/gnu/libiconv
-$(package)_file_name=libiconv-$($(package)_version).tar.gz
-$(package)_sha256_hash=ccf536620a45458d26ba83887a983b96827001e92a13847b45e4925cc8913178
-$(package)_patches=fix-whitespace.patch
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-nls
-  $(package)_config_opts=--enable-static
-  $(package)_config_opts=--disable-shared
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_freebsd=--with-pic
-endef
-
-define $(package)_preprocess_cmds
-  cp -f $(BASEDIR)/config.guess $(BASEDIR)/config.sub build-aux/ &&\
-  patch -p1 < $($(package)_patch_dir)/fix-whitespace.patch
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef

contrib/depends/packages/libusb.mk

@@ -1,39 +0,0 @@
-package=libusb
-$(package)_version=1.0.22
-$(package)_download_path=https://sourceforge.net/projects/libusb/files/libusb-1.0/libusb-$($(package)_version)/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=75aeb9d59a4fdb800d329a545c2e6799f732362193b465ea198f2aa275518157
-
-define $(package)_preprocess_cmds
-  autoreconf -i
-endef
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared
-  $(package)_config_opts_linux=--with-pic --disable-udev
-  $(package)_config_opts_mingw32=--disable-udev
-  $(package)_config_opts_darwin=--disable-udev
-endef
-
-ifneq ($(host_os),darwin)
-  define $(package)_config_cmds
-    cp -f $(BASEDIR)/config.guess config.guess &&\
-    cp -f $(BASEDIR)/config.sub config.sub &&\
-    $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-  endef
-else
-  define $(package)_config_cmds
-    $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-  endef
-endif
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds  cp -f lib/libusb-1.0.a lib/libusb.a
-endef

contrib/depends/packages/native_biplist.mk

@@ -1,20 +0,0 @@
-package=native_biplist
-$(package)_version=0.9
-$(package)_download_path=https://pypi.python.org/packages/source/b/biplist
-$(package)_file_name=biplist-$($(package)_version).tar.gz
-$(package)_sha256_hash=b57cadfd26e4754efdf89e9e37de87885f9b5c847b2615688ca04adfaf6ca604
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_patches=sorted_list.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/sorted_list.patch
-endef
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_ccache.mk

@@ -1,25 +0,0 @@
-package=native_ccache
-$(package)_version=3.3.4
-$(package)_download_path=https://samba.org/ftp/ccache
-$(package)_file_name=ccache-$($(package)_version).tar.bz2
-$(package)_sha256_hash=fa9d7f38367431bc86b19ad107d709ca7ecf1574fdacca01698bdf0a47cd8567
-
-define $(package)_set_vars
-$(package)_config_opts=
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf lib include
-endef

contrib/depends/packages/native_cctools.mk

@@ -1,70 +0,0 @@
-package=native_cctools
-$(package)_version=807d6fd1be5d2224872e381870c0a75387fe05e6
-$(package)_download_path=https://github.com/theuni/cctools-port/archive
-$(package)_file_name=$($(package)_version).tar.gz
-$(package)_sha256_hash=a09c9ba4684670a0375e42d9d67e7f12c1f62581a27f28f7c825d6d7032ccc6a
-$(package)_build_subdir=cctools
-$(package)_clang_version=3.7.1
-$(package)_clang_download_path=http://llvm.org/releases/$($(package)_clang_version)
-$(package)_clang_download_file=clang+llvm-$($(package)_clang_version)-x86_64-linux-gnu-ubuntu-14.04.tar.xz
-$(package)_clang_file_name=clang-llvm-$($(package)_clang_version)-x86_64-linux-gnu-ubuntu-14.04.tar.xz
-$(package)_clang_sha256_hash=99b28a6b48e793705228a390471991386daa33a9717cd9ca007fcdde69608fd9
-$(package)_extra_sources=$($(package)_clang_file_name)
-$(package)_patches=skip_otool.patch
-
-define $(package)_fetch_cmds
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_download_file),$($(package)_file_name),$($(package)_sha256_hash)) && \
-$(call fetch_file,$(package),$($(package)_clang_download_path),$($(package)_clang_download_file),$($(package)_clang_file_name),$($(package)_clang_sha256_hash))
-endef
-
-define $(package)_extract_cmds
-  mkdir -p $($(package)_extract_dir) && \
-  echo "$($(package)_sha256_hash)  $($(package)_source)" > $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  echo "$($(package)_clang_sha256_hash)  $($(package)_source_dir)/$($(package)_clang_file_name)" >> $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  $(build_SHA256SUM) -c $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  mkdir -p toolchain/bin toolchain/lib/clang/3.5/include && \
-  tar --strip-components=1 -C toolchain -xf $($(package)_source_dir)/$($(package)_clang_file_name) && \
-  rm -f toolchain/lib/libc++abi.so* && \
-  echo "#!/bin/sh" > toolchain/bin/$(host)-dsymutil && \
-  echo "exit 0" >> toolchain/bin/$(host)-dsymutil && \
-  chmod +x toolchain/bin/$(host)-dsymutil && \
-  tar --strip-components=1 -xf $($(package)_source)
-endef
-
-define $(package)_set_vars
-$(package)_config_opts=--target=$(host) --disable-lto-support
-$(package)_ldflags+=-Wl,-rpath=\\$$$$$$$$\$$$$$$$$ORIGIN/../lib
-$(package)_cc=$($(package)_extract_dir)/toolchain/bin/clang
-$(package)_cxx=$($(package)_extract_dir)/toolchain/bin/clang++
-endef
-
-# If clang gets updated to a version with a fix for https://reviews.llvm.org/D50559
-# then the patch that skips otool can be removed.
-define $(package)_preprocess_cmds
-  patch -p0 < $($(package)_patch_dir)/skip_otool.patch && \
-  cd $($(package)_build_subdir); ./autogen.sh && \
-  sed -i.old "/define HAVE_PTHREADS/d" ld64/src/ld/InputFiles.h
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install && \
-  cp $($(package)_extract_dir)/cctools/misc/install_name_tool $($(package)_staging_prefix_dir)/bin/ &&\
-  cd $($(package)_extract_dir)/toolchain && \
-  mkdir -p $($(package)_staging_prefix_dir)/lib/clang/$($(package)_clang_version)/include && \
-  mkdir -p $($(package)_staging_prefix_dir)/bin $($(package)_staging_prefix_dir)/include && \
-  cp bin/clang $($(package)_staging_prefix_dir)/bin/ &&\
-  cp -P bin/clang++ $($(package)_staging_prefix_dir)/bin/ &&\
-  cp lib/libLTO.so $($(package)_staging_prefix_dir)/lib/ && \
-  cp -rf lib/clang/$($(package)_clang_version)/include/* $($(package)_staging_prefix_dir)/lib/clang/$($(package)_clang_version)/include/ && \
-  cp bin/llvm-dsymutil $($(package)_staging_prefix_dir)/bin/$(host)-dsymutil && \
-  if `test -d include/c++/`; then cp -rf include/c++/ $($(package)_staging_prefix_dir)/include/; fi && \
-  if `test -d lib/c++/`; then cp -rf lib/c++/ $($(package)_staging_prefix_dir)/lib/; fi
-endef

contrib/depends/packages/native_cdrkit.mk

@@ -1,26 +0,0 @@
-package=native_cdrkit
-$(package)_version=1.1.11
-$(package)_download_path=https://distro.ibiblio.org/fatdog/source/600/c
-$(package)_file_name=cdrkit-$($(package)_version).tar.bz2
-$(package)_sha256_hash=b50d64c214a65b1a79afe3a964c691931a4233e2ba605d793eb85d0ac3652564
-$(package)_patches=cdrkit-deterministic.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/cdrkit-deterministic.patch
-endef
-
-define $(package)_config_cmds
-  cmake -DCMAKE_INSTALL_PREFIX=$(build_prefix)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) genisoimage
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C genisoimage install
-endef
-
-define $(package)_postprocess_cmds
-  rm bin/isovfy bin/isoinfo bin/isodump bin/isodebug bin/devdump
-endef

contrib/depends/packages/native_cmake-unused.mk

@@ -1,23 +0,0 @@
-package=native_cmake
-$(package)_version=3.14.0
-$(package)_version_dot=v3.14
-$(package)_download_path=https://cmake.org/files/$($(package)_version_dot)/
-$(package)_file_name=cmake-$($(package)_version).tar.gz
-$(package)_sha256_hash=aa76ba67b3c2af1946701f847073f4652af5cbd9f141f221c97af99127e75502
-
-define $(package)_set_vars
-$(package)_config_opts=
-endef
-
-define $(package)_config_cmds
-  ./bootstrap &&\
-  ./configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/native_ds_store.mk

@@ -1,17 +0,0 @@
-package=native_ds_store
-$(package)_version=1.1.0
-$(package)_download_path=https://bitbucket.org/al45tair/ds_store/get
-$(package)_download_file=v$($(package)_version).tar.bz2
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=921596764d71d1bbd3297a90ef6d286f718794d667e4f81d91d14053525d64c1
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_dependencies=native_biplist
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_libdmg-hfsplus.mk

@@ -1,22 +0,0 @@
-package=native_libdmg-hfsplus
-$(package)_version=0.1
-$(package)_download_path=https://github.com/theuni/libdmg-hfsplus/archive
-$(package)_file_name=libdmg-hfsplus-v$($(package)_version).tar.gz
-$(package)_sha256_hash=6569a02eb31c2827080d7d59001869ea14484c281efab0ae7f2b86af5c3120b3
-$(package)_build_subdir=build
-
-define $(package)_preprocess_cmds
-  mkdir build
-endef
-
-define $(package)_config_cmds
-  cmake -DCMAKE_INSTALL_PREFIX:PATH=$(build_prefix)/bin ..
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C dmg
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C dmg install
-endef

contrib/depends/packages/native_mac_alias.mk

@@ -1,21 +0,0 @@
-package=native_mac_alias
-$(package)_version=1.1.0
-$(package)_download_path=https://bitbucket.org/al45tair/mac_alias/get
-$(package)_download_file=v$($(package)_version).tar.bz2
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=87ad827e66790028361e43fc754f68ed041a9bdb214cca03c853f079b04fb120
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_patches=python3.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/python3.patch
-endef
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_protobuf.mk

@@ -1,27 +0,0 @@
-package=protobuf3
-$(package)_version=3.6.1
-$(package)_download_path=https://github.com/protocolbuffers/protobuf/releases/download/v$($(package)_version)/
-$(package)_file_name=protobuf-cpp-$($(package)_version).tar.gz
-$(package)_sha256_hash=b3732e471a9bb7950f090fd0457ebd2536a9ba0891b7f3785919c654fe2a2529
-$(package)_cxxflags=-std=c++11
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --prefix=$(build_prefix)
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C src install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/libprotoc.a
-endef

contrib/depends/packages/ncurses.mk

@@ -1,64 +0,0 @@
-package=ncurses
-$(package)_version=6.1
-$(package)_download_path=https://ftp.gnu.org/gnu/ncurses
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=aa057eeeb4a14d470101eff4597d5833dcef5965331be3528c08d99cebaa0d17
-$(package)_patches=fallback.c
-
-define $(package)_set_vars
-  $(package)_build_opts=CC="$($(package)_cc)"
-  $(package)_config_env=AR="$($(package)_ar)" RANLIB="$($(package)_ranlib)" CC="$($(package)_cc)" ARFLAGS=$($(package)_arflags) cf_cv_ar_flags=""
-  $(package)_config_env_darwin=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-  $(package)_config_opts=--prefix=$(host_prefix)
-  $(package)_config_opts+=--disable-shared
-  $(package)_config_opts+=--with-build-cc=gcc
-  $(package)_config_opts+=--without-debug
-  $(package)_config_opts+=--without-ada
-  $(package)_config_opts+=--without-cxx-binding
-  $(package)_config_opts+=--without-cxx
-  $(package)_config_opts+=--without-ticlib
-  $(package)_config_opts+=--without-tic
-  $(package)_config_opts+=--without-progs
-  $(package)_config_opts+=--without-tests
-  $(package)_config_opts+=--without-tack
-  $(package)_config_opts+=--without-manpages
-  $(package)_config_opts+=--with-termlib=tinfo
-  $(package)_config_opts+=--disable-tic-depends
-  $(package)_config_opts+=--disable-big-strings
-  $(package)_config_opts+=--disable-ext-colors
-  $(package)_config_opts+=--enable-pc-files
-  $(package)_config_opts+=--host=$(HOST)
-  $(pacakge)_config_opts+=--without-shared
-  $(pacakge)_config_opts+=--without-pthread
-  $(pacakge)_config_opts+=--disable-rpath
-  $(pacakge)_config_opts+=--disable-colorfgbg
-  $(pacakge)_config_opts+=--disable-ext-mouse
-  $(pacakge)_config_opts+=--disable-symlinks
-  $(pacakge)_config_opts+=--enable-warnings
-  $(pacakge)_config_opts+=--enable-assertions
-  $(package)_config_opts+=--with-default-terminfo-dir=/etc/_terminfo_
-  $(package)_config_opts+=--with-terminfo-dirs=/etc/_terminfo_
-  $(pacakge)_config_opts+=--enable-database
-  $(pacakge)_config_opts+=--enable-sp-funcs
-  $(pacakge)_config_opts+=--disable-term-driver
-  $(pacakge)_config_opts+=--enable-interop
-  $(pacakge)_config_opts+=--enable-widec
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -fPIC"
-endef
-
-define $(package)_preprocess_cmds
-  cp $($(package)_patch_dir)/fallback.c ncurses
-endef
-
-define $(package)_config_cmds
-  ./configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts) V=1
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) install.libs DESTDIR=$($(package)_staging_dir)
-endef
-

contrib/depends/packages/openssl.mk

@@ -1,78 +0,0 @@
-package=openssl
-$(package)_version=1.0.2r
-$(package)_download_path=https://ftp.openssl.org/source/old/1.0.2
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=ae51d08bba8a83958e894946f15303ff894d75c2b8bbd44a852b64e3fe11d0d6
-$(package)_patches=fix_arflags.patch
-
-define $(package)_set_vars
-$(package)_config_env=AR="$($(package)_ar)" ARFLAGS=$($(package)_arflags) RANLIB="$($(package)_ranlib)" CC="$($(package)_cc)"
-$(package)_config_opts=--prefix=$(host_prefix) --openssldir=$(host_prefix)/etc/openssl
-$(package)_config_opts+=no-capieng
-$(package)_config_opts+=no-dso
-$(package)_config_opts+=no-dtls1
-$(package)_config_opts+=no-ec_nistp_64_gcc_128
-$(package)_config_opts+=no-gost
-$(package)_config_opts+=no-gmp
-$(package)_config_opts+=no-heartbeats
-$(package)_config_opts+=no-jpake
-$(package)_config_opts+=no-krb5
-$(package)_config_opts+=no-libunbound
-$(package)_config_opts+=no-md2
-$(package)_config_opts+=no-rc5
-$(package)_config_opts+=no-rdrand
-$(package)_config_opts+=no-rfc3779
-$(package)_config_opts+=no-rsax
-$(package)_config_opts+=no-sctp
-$(package)_config_opts+=no-sha0
-$(package)_config_opts+=no-shared
-$(package)_config_opts+=no-ssl-trace
-$(package)_config_opts+=no-ssl2
-$(package)_config_opts+=no-ssl3
-$(package)_config_opts+=no-static_engine
-$(package)_config_opts+=no-store
-$(package)_config_opts+=no-unit-test
-$(package)_config_opts+=no-weak-ssl-ciphers
-$(package)_config_opts+=no-zlib
-$(package)_config_opts+=no-zlib-dynamic
-$(package)_config_opts+=$($(package)_cflags) $($(package)_cppflags)
-$(package)_config_opts_linux=-fPIC -Wa,--noexecstack
-$(package)_config_opts_freebsd=-fPIC -Wa,--noexecstack
-$(package)_config_opts_x86_64_linux=linux-x86_64
-$(package)_config_opts_i686_linux=linux-generic32
-$(package)_config_opts_arm_linux=linux-generic32
-$(package)_config_opts_aarch64_linux=linux-generic64
-$(package)_config_opts_arm_android=--static android-armv7 no-asm
-$(package)_config_opts_aarch64_android=--static android no-asm
-$(package)_config_opts_riscv64_linux=linux-generic64
-$(package)_config_opts_mipsel_linux=linux-generic32
-$(package)_config_opts_mips_linux=linux-generic32
-$(package)_config_opts_powerpc_linux=linux-generic32
-$(package)_config_opts_x86_64_darwin=darwin64-x86_64-cc
-$(package)_config_opts_x86_64_mingw32=mingw64
-$(package)_config_opts_i686_mingw32=mingw
-$(package)_config_opts_x86_64_freebsd=BSD-x86_64
-endef
-
-define $(package)_preprocess_cmds
-  sed -i.old "/define DATE/d" util/mkbuildinf.pl && \
-  sed -i.old "s|engines apps test|engines|" Makefile.org && \
-  sed -i -e "s/-mandroid //" Configure && \
-  patch < $($(package)_patch_dir)/fix_arflags.patch
-endef
-
-define $(package)_config_cmds
-  ./Configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -j1 build_libs libcrypto.pc libssl.pc openssl.pc
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) INSTALL_PREFIX=$($(package)_staging_dir) -j1 install_sw
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf share bin etc
-endef

contrib/depends/packages/packages.mk

@@ -1,36 +0,0 @@
-packages:=boost openssl zeromq libiconv
-
-native_packages := native_ccache
-
-hardware_packages := hidapi protobuf libusb
-hardware_native_packages := native_protobuf
-
-android_native_packages = android_ndk
-android_packages = ncurses readline sodium
-
-darwin_native_packages = native_biplist native_ds_store native_mac_alias $(hardware_native_packages)
-darwin_packages = sodium ncurses readline $(hardware_packages)
-
-# not really native...
-freebsd_native_packages = freebsd_base
-freebsd_packages = ncurses readline sodium
-
-linux_packages = eudev ncurses readline sodium $(hardware_packages)
-linux_native_packages = $(hardware_native_packages)
-qt_packages = qt
-
-ifeq ($(build_tests),ON)
-packages += gtest
-endif
-
-ifneq ($(host_arch),riscv64)
-linux_packages += unwind
-endif
-
-mingw32_packages = icu4c sodium $(hardware_packages)
-mingw32_native_packages = $(hardware_native_packages)
-
-ifneq ($(build_os),darwin)
-darwin_native_packages += native_cctools native_cdrkit native_libdmg-hfsplus
-endif
-

contrib/depends/packages/protobuf.mk

@@ -1,31 +0,0 @@
-package=protobuf
-$(package)_version=$(native_$(package)_version)
-$(package)_download_path=$(native_$(package)_download_path)
-$(package)_file_name=$(native_$(package)_file_name)
-$(package)_sha256_hash=$(native_$(package)_sha256_hash)
-$(package)_dependencies=native_$(package)
-$(package)_cxxflags=-std=c++11
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --with-protoc=$(build_prefix)/bin/protoc
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src libprotobuf.la
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C src install-libLTLIBRARIES install-nobase_includeHEADERS &&\
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-pkgconfigDATA
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/libprotoc.a &&\
-  rm lib/*.la
-endef
-

contrib/depends/packages/qt.mk

@@ -1,148 +0,0 @@
-PACKAGE=qt
-$(package)_version=5.7.1
-$(package)_download_path=http://linorg.usp.br/Qt/archive/qt/5.7/5.7.1/submodules
-$(package)_suffix=opensource-src-$($(package)_version).tar.gz
-$(package)_file_name=qtbase-$($(package)_suffix)
-$(package)_sha256_hash=95f83e532d23b3ddbde7973f380ecae1bac13230340557276f75f2e37984e410
-$(package)_build_subdir=qtbase
-$(package)_qt_libs=corelib
-$(package)_patches=pidlist_absolute.patch fix_qt_pkgconfig.patch qfixed-coretext.patch
-
-$(package)_qttranslations_file_name=qttranslations-$($(package)_suffix)
-$(package)_qttranslations_sha256_hash=3a15aebd523c6d89fb97b2d3df866c94149653a26d27a00aac9b6d3020bc5a1d
-
-$(package)_qttools_file_name=qttools-$($(package)_suffix)
-$(package)_qttools_sha256_hash=22d67de915cb8cd93e16fdd38fa006224ad9170bd217c2be1e53045a8dd02f0f
-
-$(package)_extra_sources  = $($(package)_qttranslations_file_name)
-$(package)_extra_sources += $($(package)_qttools_file_name)
-
-define $(package)_set_vars
-$(package)_config_opts_release = -release
-$(package)_config_opts_debug = -debug
-$(package)_config_opts += -bindir $(build_prefix)/bin
-$(package)_config_opts += -c++std c++11
-$(package)_config_opts += -confirm-license
-$(package)_config_opts += -dbus-runtime
-$(package)_config_opts += -no-alsa
-$(package)_config_opts += -no-audio-backend
-$(package)_config_opts += -no-cups
-$(package)_config_opts += -no-egl
-$(package)_config_opts += -no-eglfs
-$(package)_config_opts += -no-feature-style-windowsmobile
-$(package)_config_opts += -no-feature-style-windowsce
-$(package)_config_opts += -no-freetype
-$(package)_config_opts += -no-gif
-$(package)_config_opts += -no-glib
-$(package)_config_opts += -no-gstreamer
-$(package)_config_opts += -no-icu
-$(package)_config_opts += -no-iconv
-$(package)_config_opts += -no-kms
-$(package)_config_opts += -no-linuxfb
-$(package)_config_opts += -no-libudev
-$(package)_config_opts += -no-mitshm
-$(package)_config_opts += -no-mtdev
-$(package)_config_opts += -no-pulseaudio
-$(package)_config_opts += -no-openvg
-$(package)_config_opts += -no-reduce-relocations
-$(package)_config_opts += -no-qml-debug
-$(package)_config_opts += -no-sql-db2
-$(package)_config_opts += -no-sql-ibase
-$(package)_config_opts += -no-sql-oci
-$(package)_config_opts += -no-sql-tds
-$(package)_config_opts += -no-sql-mysql
-$(package)_config_opts += -no-sql-odbc
-$(package)_config_opts += -no-sql-psql
-$(package)_config_opts += -no-sql-sqlite
-$(package)_config_opts += -no-sql-sqlite2
-$(package)_config_opts += -no-use-gold-linker
-$(package)_config_opts += -no-xinput2
-$(package)_config_opts += -no-xrender
-$(package)_config_opts += -nomake examples
-$(package)_config_opts += -nomake tests
-$(package)_config_opts += -opensource
-$(package)_config_opts += -no-openssl
-$(package)_config_opts += -optimized-qmake
-$(package)_config_opts += -pch
-$(package)_config_opts += -pkg-config
-$(package)_config_opts += -no-libpng
-$(package)_config_opts += -no-libjpeg
-$(package)_config_opts += -qt-pcre
-$(package)_config_opts += -no-zlib
-$(package)_config_opts += -reduce-exports
-$(package)_config_opts += -static
-$(package)_config_opts += -silent
-$(package)_config_opts += -v
-$(package)_config_opts += -no-feature-printer
-$(package)_config_opts += -no-feature-printdialog
-$(package)_config_opts += -no-gui
-$(package)_config_opts += -no-freetype
-$(package)_config_opts += -no-sm
-$(package)_config_opts += -no-fontconfig
-$(package)_config_opts += -no-opengl
-$(package)_config_opts += -no-xkb
-$(package)_config_opts += -no-xcb
-$(package)_config_opts += -no-xshape
-$(package)_build_env  = QT_RCC_TEST=1
-endef
-
-define $(package)_fetch_cmds
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_download_file),$($(package)_file_name),$($(package)_sha256_hash)) && \
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_qttranslations_file_name),$($(package)_qttranslations_file_name),$($(package)_qttranslations_sha256_hash)) && \
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_qttools_file_name),$($(package)_qttools_file_name),$($(package)_qttools_sha256_hash))
-endef
-
-define $(package)_extract_cmds
-  mkdir -p $($(package)_extract_dir) && \
-  echo "$($(package)_sha256_hash)  $($(package)_source)" > $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  echo "$($(package)_qttranslations_sha256_hash)  $($(package)_source_dir)/$($(package)_qttranslations_file_name)" >> $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  echo "$($(package)_qttools_sha256_hash)  $($(package)_source_dir)/$($(package)_qttools_file_name)" >> $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  $(build_SHA256SUM) -c $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  mkdir qtbase && \
-  tar --strip-components=1 -xf $($(package)_source) -C qtbase && \
-  mkdir qttranslations && \
-  tar --strip-components=1 -xf $($(package)_source_dir)/$($(package)_qttranslations_file_name) -C qttranslations && \
-  mkdir qttools && \
-  tar --strip-components=1 -xf $($(package)_source_dir)/$($(package)_qttools_file_name) -C qttools
-endef
-
-
-define $(package)_preprocess_cmds
-  sed -i.old "s|updateqm.commands = \$$$$\$$$$LRELEASE|updateqm.commands = $($(package)_extract_dir)/qttools/bin/lrelease|" qttranslations/translations/translations.pro && \
-  sed -i.old "/updateqm.depends =/d" qttranslations/translations/translations.pro && \
-  patch -p1 < $($(package)_patch_dir)/pidlist_absolute.patch && \
-  patch -p1 < $($(package)_patch_dir)/fix_qt_pkgconfig.patch && \
-  patch -p1 < $($(package)_patch_dir)/qfixed-coretext.patch && \
-  echo "!host_build: QMAKE_CFLAGS     += $($(package)_cflags) $($(package)_cppflags)" >> qtbase/mkspecs/common/gcc-base.conf && \
-  echo "!host_build: QMAKE_CXXFLAGS   += $($(package)_cxxflags) $($(package)_cppflags)" >> qtbase/mkspecs/common/gcc-base.conf && \
-  echo "!host_build: QMAKE_LFLAGS     += $($(package)_ldflags)" >> qtbase/mkspecs/common/gcc-base.conf
-endef
-
-define $(package)_config_cmds
-  export PKG_CONFIG_SYSROOT_DIR=/ && \
-  export PKG_CONFIG_LIBDIR=$(host_prefix)/lib/pkgconfig && \
-  export PKG_CONFIG_PATH=$(host_prefix)/share/pkgconfig  && \
-  ./configure $($(package)_config_opts) && \
-  echo "CONFIG += force_bootstrap" >> mkspecs/qconfig.pri && \
-  $(MAKE) sub-src-clean && \
-  cd ../qttranslations && ../qtbase/bin/qmake qttranslations.pro -o Makefile && \
-  cd translations && ../../qtbase/bin/qmake translations.pro -o Makefile && cd ../.. &&\
-  cd qttools/src/linguist/lrelease/ && ../../../../qtbase/bin/qmake lrelease.pro -o Makefile
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src $(addprefix sub-,$($(package)_qt_libs)) && \
-  $(MAKE) -C ../qttools/src/linguist/lrelease && \
-  $(MAKE) -C ../qttranslations
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) -C src INSTALL_ROOT=$($(package)_staging_dir) $(addsuffix -install_subtargets,$(addprefix sub-,$($(package)_qt_libs))) && cd .. &&\
-  $(MAKE) -C qttools/src/linguist/lrelease INSTALL_ROOT=$($(package)_staging_dir) install_target && \
-  $(MAKE) -C qttranslations INSTALL_ROOT=$($(package)_staging_dir) install_subtargets
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf native/mkspecs/ native/lib/ lib/cmake/ && \
-  rm -f lib/lib*.la lib/*.prl plugins/*/*.prl
-endef

contrib/depends/packages/readline.mk

@@ -1,32 +0,0 @@
-package=readline
-$(package)_version=8.0
-$(package)_download_path=https://ftp.gnu.org/gnu/readline
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461
-$(package)_dependencies=ncurses
-
-define $(package)_set_vars
-  $(package)_build_opts=CC="$($(package)_cc)"
-  $(package)_config_env=AR="$($(package)_ar)" RANLIB="$($(package)_ranlib)" CC="$($(package)_cc)" LDFLAGS="-L$(host_prefix)/lib" ARFLAGS=$($(package)_arflags)
-  $(package)_config_env_darwin=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-  $(package)_config_opts+=--prefix=$(host_prefix)
-  $(package)_config_opts+=--exec-prefix=$(host_prefix)
-  $(package)_config_opts+=--host=$(HOST)
-  $(package)_config_opts+=--disable-shared --with-curses
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_config_opts_darwin+=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -fPIC"
-endef
-
-define $(package)_config_cmds
-  ./configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) install DESTDIR=$($(package)_staging_dir) prefix=$(host_prefix) exec-prefix=$(host_prefix)
-endef
-

contrib/depends/packages/sodium.mk

@@ -1,33 +0,0 @@
-package=sodium
-$(package)_version=1.0.18
-$(package)_download_path=https://download.libsodium.org/libsodium/releases/
-$(package)_file_name=libsodium-$($(package)_version).tar.gz
-$(package)_sha256_hash=6f504490b342a4f8a4c4a02fc9b866cbef8622d5df4e5452b46be121e46636c1
-$(package)_patches=disable-glibc-getrandom-getentropy.patch fix-whitespace.patch
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static --disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-$(package)_config_opts_android=RANLIB=$($(package)_ranlib) AR=$($(package)_ar) CC=$($(package)_cc)
-$(package)_config_opts_darwin=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-endef
-
-define $(package)_config_cmds
-  patch -p1 < $($(package)_patch_dir)/disable-glibc-getrandom-getentropy.patch &&\
-  ./autogen.sh &&\
-  patch -p1 < $($(package)_patch_dir)/fix-whitespace.patch &&\
-  $($(package)_autoconf) $($(package)_config_opts) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/unbound.mk

@@ -1,28 +0,0 @@
-package=unbound
-$(package)_version=1.6.8
-$(package)_download_path=https://www.unbound.net/downloads/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=e3b428e33f56a45417107448418865fe08d58e0e7fea199b855515f60884dd49
-$(package)_dependencies=openssl expat ldns
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-static --without-pyunbound --prefix=$(host_prefix) --with-libexpat=$(host_prefix) --with-ssl=$(host_prefix) --with-libevent=no --without-pythonmodule --disable-flto --with-pthreads
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_w64=--enable-static-exe --sysconfdir=/etc --prefix=$(host_prefix) --target=$(host_prefix)
-  $(package)_build_opts_mingw32=LDFLAGS="$($(package)_ldflags) -lpthread"
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-endef

contrib/depends/packages/unwind.mk

@@ -1,29 +0,0 @@
-package=unwind
-$(package)_version=1.2
-$(package)_download_path=https://download.savannah.nongnu.org/releases/libunwind
-$(package)_file_name=lib$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=1de38ffbdc88bd694d10081865871cd2bfbb02ad8ef9e1606aee18d65532b992
-$(package)_patches=fix_obj_order.patch
-
-define $(package)_preprocess_cmds
-  patch -p0 < $($(package)_patch_dir)/fix_obj_order.patch
-endef
-
-define $(package)_config_cmds
-  cp -f $(BASEDIR)/config.guess config/config.guess &&\
-  cp -f $(BASEDIR)/config.sub config/config.sub &&\
-  $($(package)_autoconf) --disable-shared --enable-static AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/xproto.mk

@@ -1,21 +0,0 @@
-package=xproto
-$(package)_version=7.0.26
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/proto
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=636162c1759805a5a0114a369dffdeccb8af8c859ef6e1445f26a4e6e046514f
-
-define $(package)_set_vars
-$(package)_config_opts=--disable-shared
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/zeromq.mk

@@ -1,38 +0,0 @@
-package=zeromq
-$(package)_version=4.1.7
-$(package)_download_path=https://github.com/zeromq/zeromq4-1/releases/download/v$($(package)_version)/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=31c383cfcd3be1dc8a66e448c403029e793687e70473b89c4cc0bd626e7da299
-$(package)_patches=9114d3957725acd34aa8b8d011585812f3369411.patch 9e6745c12e0b100cd38acecc16ce7db02905e27c.patch ffe62d3398d5e0191f554f61049aa7ec9fc892ae.patch
-
-define $(package)_set_vars
-  $(package)_config_opts=--without-documentation --disable-shared --without-libsodium --disable-curve
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_freebsd=--with-pic
-  $(package)_cxxflags=-std=c++11
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/9114d3957725acd34aa8b8d011585812f3369411.patch && \
-  patch -p1 < $($(package)_patch_dir)/9e6745c12e0b100cd38acecc16ce7db02905e27c.patch && \
-  patch -p1 < $($(package)_patch_dir)/ffe62d3398d5e0191f554f61049aa7ec9fc892ae.patch && \
-  ./autogen.sh
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) libzmq.la
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-libLTLIBRARIES install-includeHEADERS install-pkgconfigDATA
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf bin share &&\
-  rm lib/*.la
-endef
-

contrib/depends/patches/boost/fix_aroptions.patch

@@ -1,28 +0,0 @@
---- boost_1_64_0/tools/build/src/tools/gcc.jam.O	2017-04-17 03:22:26.000000000 +0100
-+++ boost_1_64_0/tools/build/src/tools/gcc.jam	2019-11-15 15:46:16.957937137 +0000
-@@ -243,6 +243,8 @@
-     {
-         ECHO notice: using gcc archiver :: $(condition) :: $(archiver[1]) ;
-     }
-+    local arflags = [ feature.get-values <arflags> : $(options) ] ;
-+    toolset.flags gcc.archive .ARFLAGS $(condition) : $(arflags) ;
- 
-     # - Ranlib.
-     local ranlib = [ common.get-invocation-command gcc
-@@ -970,6 +972,7 @@
- # logic in intel-linux, but that is hardly worth the trouble as on Linux, 'ar'
- # is always available.
- .AR = ar ;
-+.ARFLAGS = rc ;
- .RANLIB = ranlib ;
- 
- toolset.flags gcc.archive AROPTIONS <archiveflags> ;
-@@ -1011,7 +1014,7 @@
- #
- actions piecemeal archive
- {
--    "$(.AR)" $(AROPTIONS) rc "$(<)" "$(>)"
-+    "$(.AR)" $(AROPTIONS) $(.ARFLAGS) "$(<)" "$(>)"
-     "$(.RANLIB)" "$(<)"
- }
- 

contrib/depends/patches/cmake/cmake-1-fixes.patch

@@ -1,67 +0,0 @@
-This file is part of MXE. See LICENSE.md for licensing information.
-
-Contains ad hoc patches for cross building.
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Fri, 12 Aug 2016 02:01:20 +1000
-Subject: [PATCH 1/3] fix windres invocation options
-
-windres doesn't recognise various gcc flags like -mms-bitfields,
--fopenmp, -mthreads etc. (basically not `-D` or `-I`)
-
-diff --git a/Modules/Platform/Windows-windres.cmake b/Modules/Platform/Windows-windres.cmake
-index 1111111..2222222 100644
---- a/Modules/Platform/Windows-windres.cmake
-+++ b/Modules/Platform/Windows-windres.cmake
-@@ -1 +1 @@
--set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <FLAGS> <SOURCE> <OBJECT>")
-+set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <SOURCE> <OBJECT>")
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Tue, 25 Jul 2017 20:34:56 +1000
-Subject: [PATCH 2/3] add option to disable -isystem
-
-taken from (not accepted):
-https://gitlab.kitware.com/cmake/cmake/merge_requests/895
-
-see also:
-https://gitlab.kitware.com/cmake/cmake/issues/16291
-https://gitlab.kitware.com/cmake/cmake/issues/16919
-
-diff --git a/Modules/Compiler/GNU.cmake b/Modules/Compiler/GNU.cmake
-index 1111111..2222222 100644
---- a/Modules/Compiler/GNU.cmake
-+++ b/Modules/Compiler/GNU.cmake
-@@ -42,7 +42,7 @@ macro(__compiler_gnu lang)
-   string(APPEND CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT " -O2 -g -DNDEBUG")
-   set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-   set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
--  if(NOT APPLE OR NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4) # work around #4462
-+  if(NOT APPLE OR NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4 AND (NOT MXE_DISABLE_INCLUDE_SYSTEM_FLAG)) # work around #4462
-     set(CMAKE_INCLUDE_SYSTEM_FLAG_${lang} "-isystem ")
-   endif()
- endmacro()
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Tue, 15 Aug 2017 15:25:06 +1000
-Subject: [PATCH 3/3] add CPACK_NSIS_EXECUTABLE variable
-
-
-diff --git a/Source/CPack/cmCPackNSISGenerator.cxx b/Source/CPack/cmCPackNSISGenerator.cxx
-index 1111111..2222222 100644
---- a/Source/CPack/cmCPackNSISGenerator.cxx
-+++ b/Source/CPack/cmCPackNSISGenerator.cxx
-@@ -384,7 +384,9 @@ int cmCPackNSISGenerator::InitializeInternal()
-   }
- #endif
- 
--  nsisPath = cmSystemTools::FindProgram("makensis", path, false);
-+  this->SetOptionIfNotSet("CPACK_NSIS_EXECUTABLE", "makensis");
-+  nsisPath = cmSystemTools::FindProgram(
-+    this->GetOption("CPACK_NSIS_EXECUTABLE"), path, false);
- 
-   if (nsisPath.empty()) {
-     cmCPackLogger(

contrib/depends/patches/icu4c/icu-001-dont-build-static-dynamic-twice.patch

@@ -1,37 +0,0 @@
-Don't build object files twice
-
-When passed --enable-static and --enable-shared, icu will generate
-both a shared and a static version of its libraries.
-
-However, in order to do so, it builds each and every object file
-twice: once with -fPIC (for the shared library), and once without
--fPIC (for the static library). While admittedly building -fPIC for a
-static library generates a slightly suboptimal code, this is what all
-the autotools-based project are doing. They build each object file
-once, and they use it for both the static and shared libraries.
-
-icu builds the object files for the shared library as .o files, and
-the object files for static library as .ao files. By simply changing
-the suffix of object files used for static libraries to ".o", we tell
-icu to use the ones built for the shared library (i.e, with -fPIC),
-and avoid the double build of icu.
-
-On a fast build server, this brings the target icu build from
-3m41.302s down to 1m43.926s (approximate numbers: some other builds
-are running on the system at the same time).
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-Index: b/source/config/mh-linux
-===================================================================
---- a/source/config/mh-linux
-+++ b/source/config/mh-linux
-@@ -38,7 +38,7 @@
- ## Shared object suffix
- SO = so
- ## Non-shared intermediate object suffix
--STATIC_O = ao
-+STATIC_O = o
- 
- ## Compilation rules
- %.$(STATIC_O): $(srcdir)/%.c

contrib/depends/patches/libiconv/fix-whitespace.patch

@@ -1,13 +0,0 @@
-diff --git a/preload/configure b/preload/configure
-index aab5c77..e20b8f0 100755
---- a/preload/configure
-+++ b/preload/configure
-@@ -588,7 +588,7 @@ MAKEFLAGS=
- PACKAGE_NAME='libiconv'
- PACKAGE_TARNAME='libiconv'
- PACKAGE_VERSION='0'
--PACKAGE_STRING='libiconv 0'
-+PACKAGE_STRING='libiconv0'
- PACKAGE_BUGREPORT=''
- PACKAGE_URL=''
-

contrib/depends/patches/native_biplist/sorted_list.patch

@@ -1,29 +0,0 @@
---- a/biplist/__init__.py	2014-10-26 19:03:11.000000000 +0000
-+++ b/biplist/__init__.py	2016-07-19 19:30:17.663521999 +0000
-@@ -541,7 +541,7 @@
-             return HashableWrapper(n)
-         elif isinstance(root, dict):
-             n = {}
--            for key, value in iteritems(root):
-+            for key, value in sorted(iteritems(root)):
-                 n[self.wrapRoot(key)] = self.wrapRoot(value)
-             return HashableWrapper(n)
-         elif isinstance(root, list):
-@@ -616,7 +616,7 @@
-             elif isinstance(obj, dict):
-                 size = proc_size(len(obj))
-                 self.incrementByteCount('dictBytes', incr=1+size)
--                for key, value in iteritems(obj):
-+                for key, value in sorted(iteritems(obj)):
-                     check_key(key)
-                     self.computeOffsets(key, asReference=True)
-                     self.computeOffsets(value, asReference=True)
-@@ -714,7 +714,7 @@
-                 keys = []
-                 values = []
-                 objectsToWrite = []
--                for key, value in iteritems(obj):
-+                for key, value in sorted(iteritems(obj)):
-                     keys.append(key)
-                     values.append(value)
-                 for key in keys:

contrib/depends/patches/native_cctools/skip_otool.patch

@@ -1,12 +0,0 @@
---- cctools/Makefile.am.O	2016-06-09 15:06:16.000000000 +0100
-+++ cctools/Makefile.am	2019-11-18 08:59:20.078663220 +0000
-@@ -1,7 +1,7 @@
- if ISDARWIN
--SUBDIRS=libstuff ar as misc otool ld64 $(LD_CLASSIC)
-+SUBDIRS=libstuff ar as misc ld64 $(LD_CLASSIC)
- else
--SUBDIRS=libstuff ar as misc libobjc2 otool ld64 $(LD_CLASSIC)
-+SUBDIRS=libstuff ar as misc ld64 $(LD_CLASSIC)
- endif
- 
- ACLOCAL_AMFLAGS = -I m4

contrib/depends/patches/native_cdrkit/cdrkit-deterministic.patch

@@ -1,86 +0,0 @@
---- cdrkit-1.1.11.old/genisoimage/tree.c	2008-10-21 19:57:47.000000000 -0400
-+++ cdrkit-1.1.11/genisoimage/tree.c	2013-12-06 00:23:18.489622668 -0500
-@@ -1139,8 +1139,9 @@
- scan_directory_tree(struct directory *this_dir, char *path, 
- 						  struct directory_entry *de)
- {
--	DIR		*current_dir;
-+        int             current_file;
- 	char		whole_path[PATH_MAX];
-+        struct dirent  **d_list;
- 	struct dirent	*d_entry;
- 	struct directory *parent;
- 	int		dflag;
-@@ -1164,7 +1165,8 @@
- 	this_dir->dir_flags |= DIR_WAS_SCANNED;
- 
- 	errno = 0;	/* Paranoia */
--	current_dir = opendir(path);
-+	//current_dir = opendir(path);
-+        current_file = scandir(path, &d_list, NULL, alphasort);
- 	d_entry = NULL;
- 
- 	/*
-@@ -1173,12 +1175,12 @@
- 	 */
- 	old_path = path;
- 
--	if (current_dir) {
-+	if (current_file >= 0) {
- 		errno = 0;
--		d_entry = readdir(current_dir);
-+		d_entry = d_list[0];
- 	}
- 
--	if (!current_dir || !d_entry) {
-+	if (current_file < 0 || !d_entry) {
- 		int	ret = 1;
- 
- #ifdef	USE_LIBSCHILY
-@@ -1191,8 +1193,8 @@
- 			de->isorec.flags[0] &= ~ISO_DIRECTORY;
- 			ret = 0;
- 		}
--		if (current_dir)
--			closedir(current_dir);
-+		if(d_list)
-+			free(d_list);
- 		return (ret);
- 	}
- #ifdef	ABORT_DEEP_ISO_ONLY
-@@ -1208,7 +1210,7 @@
- 			errmsgno(EX_BAD, "use Rock Ridge extensions via -R or -r,\n");
- 			errmsgno(EX_BAD, "or allow deep ISO9660 directory nesting via -D.\n");
- 		}
--		closedir(current_dir);
-+		free(d_list);
- 		return (1);
- 	}
- #endif
-@@ -1250,13 +1252,13 @@
- 		 * The first time through, skip this, since we already asked
- 		 * for the first entry when we opened the directory.
- 		 */
--		if (dflag)
--			d_entry = readdir(current_dir);
-+		if (dflag && current_file >= 0)
-+			d_entry = d_list[current_file];
- 		dflag++;
- 
--		if (!d_entry)
-+		if (current_file < 0)
- 			break;
--
-+                current_file--;
- 		/* OK, got a valid entry */
- 
- 		/* If we do not want all files, then pitch the backups. */
-@@ -1348,7 +1350,7 @@
- 		insert_file_entry(this_dir, whole_path, d_entry->d_name);
- #endif	/* APPLE_HYB */
- 	}
--	closedir(current_dir);
-+	free(d_list);
- 
- #ifdef APPLE_HYB
- 	/*

contrib/depends/patches/native_mac_alias/python3.patch

@@ -1,72 +0,0 @@
-diff -dur a/mac_alias/alias.py b/mac_alias/alias.py
---- a/mac_alias/alias.py	2015-10-19 12:12:48.000000000 +0200
-+++ b/mac_alias/alias.py	2016-04-03 12:13:12.037159417 +0200
-@@ -243,10 +243,10 @@
-         alias = Alias()
-         alias.appinfo = appinfo
-             
--        alias.volume = VolumeInfo (volname.replace('/',':'),
-+        alias.volume = VolumeInfo (volname.decode().replace('/',':'),
-                                    voldate, fstype, disktype,
-                                    volattrs, volfsid)
--        alias.target = TargetInfo (kind, filename.replace('/',':'),
-+        alias.target = TargetInfo (kind, filename.decode().replace('/',':'),
-                                    folder_cnid, cnid,
-                                    crdate, creator_code, type_code)
-         alias.target.levels_from = levels_from
-@@ -261,9 +261,9 @@
-                 b.read(1)
- 
-             if tag == TAG_CARBON_FOLDER_NAME:
--                alias.target.folder_name = value.replace('/',':')
-+                alias.target.folder_name = value.decode().replace('/',':')
-             elif tag == TAG_CNID_PATH:
--                alias.target.cnid_path = struct.unpack(b'>%uI' % (length // 4),
-+                alias.target.cnid_path = struct.unpack('>%uI' % (length // 4),
-                                                            value)
-             elif tag == TAG_CARBON_PATH:
-                 alias.target.carbon_path = value
-@@ -298,9 +298,9 @@
-                 alias.target.creation_date \
-                     = mac_epoch + datetime.timedelta(seconds=seconds)
-             elif tag == TAG_POSIX_PATH:
--                alias.target.posix_path = value
-+                alias.target.posix_path = value.decode()
-             elif tag == TAG_POSIX_PATH_TO_MOUNTPOINT:
--                alias.volume.posix_path = value
-+                alias.volume.posix_path = value.decode()
-             elif tag == TAG_RECURSIVE_ALIAS_OF_DISK_IMAGE:
-                 alias.volume.disk_image_alias = Alias.from_bytes(value)
-             elif tag == TAG_USER_HOME_LENGTH_PREFIX:
-@@ -422,13 +422,13 @@
-         #       (so doing so is ridiculous, and nothing could rely on it).
-         b.write(struct.pack(b'>h28pI2shI64pII4s4shhI2s10s',
-                             self.target.kind,
--                            carbon_volname, voldate,
-+                            carbon_volname, int(voldate),
-                             self.volume.fs_type,
-                             self.volume.disk_type,
-                             self.target.folder_cnid,
-                             carbon_filename,
-                             self.target.cnid,
--                            crdate,
-+                            int(crdate),
-                             self.target.creator_code,
-                             self.target.type_code,
-                             self.target.levels_from,
-@@ -449,12 +449,12 @@
- 
-         b.write(struct.pack(b'>hhQhhQ',
-                 TAG_HIGH_RES_VOLUME_CREATION_DATE,
--                8, long(voldate * 65536),
-+                8, int(voldate * 65536),
-                 TAG_HIGH_RES_CREATION_DATE,
--                8, long(crdate * 65536)))
-+                8, int(crdate * 65536)))
- 
-         if self.target.cnid_path:
--            cnid_path = struct.pack(b'>%uI' % len(self.target.cnid_path),
-+            cnid_path = struct.pack('>%uI' % len(self.target.cnid_path),
-                                     *self.target.cnid_path)
-             b.write(struct.pack(b'>hh', TAG_CNID_PATH,
-                                  len(cnid_path)))