gitea-mirror/monero
1
0
Fork 0
mirror of https://github.com/monero-project/monero.git synced 2026-06-12 11:01:34 -07:00
Code Issues Packages Projects Releases Wiki Activity
Files
b51a0cb896ee3d09f397f306228bc1d4286624b5
monero/translations/monero_tr.ts
T
tobtoht b51a0cb896 translations: don't include locations
2026-06-03 21:21:57 +02:00

4783 lines
177 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="tr">
<context>
<name>Monero::AddressBookImpl</name>
<message>
<source>Invalid destination address</source>
<translation>geçersiz varış adresi</translation>
</message>
<message>
<source>Payment ID supplied: this is obsolete</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Monero::PendingTransactionImpl</name>
<message>
<source>Attempting to save transaction to file, but specified file(s) exist. Exiting to not risk overwriting. File:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to write transaction(s) to file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>daemon is busy. Please try again later.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no connection to daemon. Please make sure daemon is running.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>transaction %s was rejected by daemon with status: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>. Reason: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unknown exception: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unhandled exception</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Couldn&apos;t multisig sign data: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Couldn&apos;t sign multisig transaction: </source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Monero::UnsignedTransactionImpl</name>
<message>
<source>This is a watch only wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to sign transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Claimed change does not go to a paid address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Claimed change is larger than payment to the change address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change goes to more than one address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>sending %s to %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>with no destinations</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%s change to %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no change</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu. %s</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Monero::WalletImpl</name>
<message>
<source>daemon is busy. Please try again later.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no connection to daemon. Please make sure daemon is running.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RPC error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to get outputs to mix: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>not enough outputs for specified ring size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>found outputs to use</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Please sweep unmixable outputs.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>not enough money to transfer, available only %s, sent amount %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse secret spend key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neither view key nor spend key supplied, cancelled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse secret view key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify secret spend key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>spend key does not match address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify secret view key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>view key does not match address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to generate new wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Electrum seed is empty</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Electrum-style word list failed verification</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to send import wallet request</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to load unsigned transactions</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to load transaction from file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet is view only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to save file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Key images can only be imported with a trusted daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to import key images: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to get subaddress label: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to set subaddress label: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to get multisig info: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to make multisig: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to finalize multisig wallet creation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to finalize multisig wallet creation: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to export multisig images: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse imported multisig images</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to import multisig images: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to check for partial multisig key images: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to restore multisig transaction: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sending all requires one destination address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Destinations and amounts are unequal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>payment id has invalid format, expected 64 character hex string: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid destination address</source>
<translation type="unfinished">geçersiz varış adresi</translation>
</message>
<message>
<source>a single transaction cannot use more than one payment id</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to set up payment id, though it was decoded correctly</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid output: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to mark outputs as spent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to mark output as spent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to mark output as unspent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>not enough money to transfer, overall balance only %s, sent amount %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>output amount</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>transaction was not constructed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>transaction %s was rejected by daemon with status: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>one of destinations is zero</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to find a suitable way to split transactions</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown transfer error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>internal error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unexpected error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown error</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to get outputs to mix</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no tx keys found for this txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse tx key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Address must not be a subaddress</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The wallet must be in multisig ready state</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Given string is not a key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rescan spent can only be used with a trusted daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse output amount</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse output offset</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse key image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to get ring</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to get rings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to set ring</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Wallet</name>
<message>
<source>Failed to parse address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>key does not match address</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>command_line</name>
<message>
<source>yes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>cryptonote::rpc_args</name>
<message>
<source>Specify IP to bind RPC server</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specify IPv6 address to bind RPC server</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allow IPv6 for RPC</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ignore unsuccessful IPv4 bind for RPC</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specify username[:password] required for RPC server</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Confirm rpc-bind-ip value is NOT a loopback (local) IP</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specify a comma separated list of origins to allow cross origin resource sharing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable SSL on RPC connections: enabled|disabled|autodetect</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path to a PEM format private key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path to a PEM format certificate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path to file containing concatenated PEM format certificate(s) to replace system CA(s).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>List of certificate fingerprints to allow</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allow user (via --rpc-ssl-certificates) chain certificates</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allow any peer certificate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid IP address given for --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Username specified with --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> cannot be empty</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> requires RPC server password --</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>cryptonote::simple_wallet</name>
<message>
<source>Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spending from address index %d
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sending %s. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The transaction fee is %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>, of which %s is dust from change</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>A total of %s from dust change will be sent to dust address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Not enough money in unlocked balance</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No address given</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>missing lockedblocks parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>bad locked_blocks parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse Payment ID</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse key image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No outputs found</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multiple transactions are created, which is not supposed to happen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The transaction uses multiple or no inputs, which is not supposed to happen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Money successfully sent, transaction: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>missing threshold amount</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid amount threshold</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Claimed change does not go to a paid address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Claimed change is larger than payment to the change address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change goes to more than one address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>sending %s to %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> dummy output(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>with no destinations</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no change</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Daemon is local, assuming trusted</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Password for new watch-only wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>false</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Commands: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unknown command: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Command usage: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Command description: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is watch-only and has no spend key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>command not supported by HW wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is watch-only and has no seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is multisig but not yet finalized</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is non-deterministic and has no seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to retrieve seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is multisig and has no seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Incorrect password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Your original password was incorrect.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error with wallet rewrite: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Random payment ID: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Current fee is %s %s per %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Payment required, see the &apos;rpc_payment_info&apos; command</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: failed to estimate backlog array size: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: bad estimated backlog array size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> (current)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%u block (%u minutes) backlog at priority %u%s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%u to %u block (%u to %u minutes) backlog at priority %u</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No backlog at priority </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This wallet is already multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is watch-only and cannot be made multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This wallet has been used before, please use a new wallet to create a multisig wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send this multisig info to all other participants, then use make_multisig &lt;threshold&gt; &lt;info1&gt; [&lt;info2&gt;...] with others&apos; multisig info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This includes the PRIVATE view key, so needs to be disclosed only to that multisig wallet&apos;s participants </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid threshold</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Another step is needed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating multisig: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating multisig: new wallet is not multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> multisig address: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This wallet is not multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This wallet is already finalized</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to finalize multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to finalize multisig: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig address: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This multisig wallet is not yet finalized</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to save file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error exporting multisig info: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig info exported to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to read file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig info imported</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to import multisig info: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to update spent status after importing multisig info: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Untrusted daemon, spent status may be incorrect. Use a trusted daemon and run &quot;rescan_spent&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This is not a multisig wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to sign multisig transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to sign multisig transaction: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transaction successfully signed to file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>It may be relayed to the network with submit_multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to load multisig transaction from file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig transaction signed by only %u signers, needs %u more signatures</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transaction successfully submitted, transaction </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You can check its status by using the `show_transfers` command.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown error</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to export multisig transaction to file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saved exported multisig transaction file(s): </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unexpected error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid key image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Key image either not spent, or spent with mixin 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to get key image ring: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File doesn&apos;t exist</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid ring specification: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid key image: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid ring type, expected relative or abosolute: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error reading line: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid ring: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid relative ring: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid absolute ring: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to set ring for key image: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Continuing.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Missing absolute or relative keyword</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid index: must be a strictly positive unsigned integer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid index: indices wrap</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid index: indices should be in strictly ascending order</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to set ring</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid key image or txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to unset ring</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RPC client ID: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RPC client secret key: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to query daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Using daemon: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Payments required for node use, current credits: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Credits target: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Credits spent this session: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Credit discrepancy this session: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Difficulty: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>credits per hash found, </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>credits/hash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mining for payment at %.1f H/s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Estimated time till %u credits target mined: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mining for payment</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Not mining</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No payment needed for node use</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bad argument: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>should be &quot;add&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to open file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to save known rings: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>usage: %s &lt;key_image&gt;|&lt;pubkey&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Frozen: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Not frozen: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source> bytes sent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> bytes received</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No known public nodes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>last_seen</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>never</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error retrieving public node list: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Welcome to Monero, the private cryptocurrency.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Monero, like Bitcoin, is a cryptocurrency. That is, it is digital money.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Monero protects your privacy on the blockchain, and while Monero strives to improve all the time,</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no privacy technology can be 100% perfect, Monero included.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Monero cannot protect you from malware, and it may not be as effective as we hope against powerful adversaries.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Flaws in Monero may be discovered in the future, and attacks may be developed to peek under some</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>of the layers of privacy Monero provides. Be safe and practice defense in depth.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Daemon does not require payment for RPC access</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Starting mining for RPC access: diff %llu, %f credits/hash%s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Run stop_mining_for_rpc to stop</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is watch-only and cannot transfer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ring size must be an integer &gt;= </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: this is a non default ring size, which may harm your privacy. Default is recommended.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>could not change default ring size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>priority must be either 0, 1, 2, 3, or 4, or one of: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>could not change default priority</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid unit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid count: must be an unsigned integer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid target</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid amount</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid argument: must be either 1/yes or 0/no</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start mining in the daemon (bg_mining and ignore_battery are optional booleans).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stop mining in the daemon.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set another daemon to connect to.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save the current blockchain data.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Synchronize the transactions and balance.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the wallet&apos;s balance of the currently selected account.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the incoming transfers, all or filtered by availability and address index.
Output format:
Amount, Spent(&quot;T&quot;|&quot;F&quot;), &quot;frozen&quot;|&quot;locked&quot;|&quot;unlocked&quot;, RingCT, Global Index, Transaction Hash, Address Index, [Public Key, Key Image] </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the payments for the given payment IDs.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the blockchain height.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send all unlocked balance to an address and lock it for &lt;lockblocks&gt; (max. 1000000). If the parameter &quot;index&lt;N1&gt;[,&lt;N2&gt;,...]&quot; is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. &lt;priority&gt; is the priority of the sweep. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command &quot;set priority&quot;) is used. &lt;ring_size&gt; is the number of inputs to include for untraceability.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send all unmixable outputs to yourself with ring_size 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send all unlocked outputs below the threshold to an address.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send a single output of the given key image to an address without change.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Donate &lt;amount&gt; to the development team (donate.getmonero.org).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sign a transaction from a file. If the parameter &quot;export_raw&quot; is specified, transaction raw hex data suitable for the daemon RPC /sendrawtransaction is exported.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Submit a signed transaction from a file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change the current log detail (level must be &lt;0-4&gt;).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If no arguments are specified, the wallet shows all the existing accounts along with their balances.
If the &quot;new&quot; argument is specified, the wallet creates a new account with its label initialized by the provided label text (which can be empty).
If the &quot;switch&quot; argument is specified, the wallet switches to the account specified by &lt;index&gt;.
If the &quot;label&quot; argument is specified, the wallet sets the label of the account specified by &lt;index&gt; to the provided label text.
If the &quot;tag&quot; argument is specified, a tag &lt;tag_name&gt; is assigned to the specified accounts &lt;account_index_1&gt;, &lt;account_index_2&gt;, ....
If the &quot;untag&quot; argument is specified, the tags assigned to the specified accounts &lt;account_index_1&gt;, &lt;account_index_2&gt; ..., are removed.
If the &quot;tag_description&quot; argument is specified, the tag &lt;tag_name&gt; is assigned an arbitrary text &lt;description&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If no arguments are specified or &lt;index&gt; is specified, the wallet shows the default or specified address. If &quot;all&quot; is specified, the wallet shows all the existing addresses in the currently selected account. If &quot;new &quot; is specified, the wallet creates a new address with the provided label text (which can be empty). If &quot;label&quot; is specified, the wallet sets the label of the address specified by &lt;index&gt; to the provided label text.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print all entries in the address book, optionally adding/deleting an entry to/from it.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save the wallet data.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save a watch-only keys file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display the private view key.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display the private spend key.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display the Electrum-style mnemonic seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display the encrypted Electrum-style mnemonic seed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rescan the blockchain for spent outputs.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get the transaction key (r) for a given &lt;txid&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set the transaction key (r) for a given &lt;txid&gt; in case the tx was made by some other device or 3rd party wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check the amount going to &lt;address&gt; in &lt;txid&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate a signature proving funds sent to &lt;address&gt; in &lt;txid&gt;, optionally with a challenge string &lt;message&gt;, using either the transaction secret key (when &lt;address&gt; is not your wallet&apos;s address) or the view secret key (otherwise), which does not disclose the secret key.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check the proof for funds going to &lt;address&gt; in &lt;txid&gt; with the challenge string &lt;message&gt; if any.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate a signature proving that you generated &lt;txid&gt; using the spend secret key, optionally with a challenge string &lt;message&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check a signature proving that the signer generated &lt;txid&gt;, optionally with a challenge string &lt;message&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate a signature proving that you own at least this much, optionally with a challenge string &lt;message&gt;.
If &apos;all&apos; is specified, you prove the entire sum of all of your existing accounts&apos; balances.
Otherwise, you prove the reserve of the smallest possible amount above &lt;amount&gt; available in your current account.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check a signature proving that the owner of &lt;address&gt; holds at least this much, optionally with a challenge string &lt;message&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the unspent outputs of a specified address within an optional amount range.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set an arbitrary string note for a &lt;txid&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get a string note for a txid.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set an arbitrary description for the wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get the description of the wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the wallet&apos;s status.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the wallet&apos;s information.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sign the contents of a file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Verify a signature on the contents of a file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import a signed key images list and verify their spent status.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Attempts to reconnect HW wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export a set of outputs owned by this wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import a set of outputs owned by this wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show information about a transfer to/from this address.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change the wallet&apos;s password.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print the information about the current fee and transaction backlog.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export data needed to create a multisig wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Turn this wallet into a multisig wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Turn this wallet into a multisig wallet, extra step for N-1/N wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export multisig info for other participants</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Import multisig info from other participants</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sign a multisig transaction from a file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Submit a signed multisig transaction from a file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export a signed multisig transaction to a file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Print the ring(s) used to spend a given key image or transaction (if the ring size is &gt; 1)
Output format:
Key Image, &quot;absolute&quot;, list of rings</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set the ring used for a given key image, so it can be reused in a fork</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unsets the ring used for a given key image or transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save known rings to the shared rings database</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Freeze a single output by key image so it will not be used</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thaw a single output by key image so it may be used again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Checks whether a given output is currently frozen by key image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Prints simple network stats</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lists known public nodes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Prints basic info about Monero for first time users</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Returns version information</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Get info about RPC payments to current node</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start mining to pay for RPC access</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stop mining to pay for RPC access</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the help section or the documentation about a &lt;command&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>needs an argument</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>set seed: needs an argument. available options: language</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>0 or 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>integer &gt;= </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>0, 1, 2, 3, or 4, or one of </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>0|1|2 (or never|action|decrypt)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>monero, millinero, micronero, nanonero, piconero</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unsigned integer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>amount</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>block height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;major&gt;:&lt;minor&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>1/yes or 0/no</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>floating point &gt;= 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>set: unrecognized argument(s)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet name not valid. Please try again or use Ctrl-C to quit.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet and key files found, loading...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Key file found but not wallet file. Regenerating...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Key file not found. Failed to open wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No wallet found with that name. Confirm creation of new wallet named: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generating new wallet...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t specify more than one of --testnet and --stagenet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>can&apos;t specify more than one of --generate-new-wallet=&quot;wallet_name&quot;, --wallet-file=&quot;wallet_name&quot;, --generate-from-view-key=&quot;wallet_name&quot;, --generate-from-spend-key=&quot;wallet_name&quot;, --generate-from-keys=&quot;wallet_name&quot;, --generate-from-multisig-keys=&quot;wallet_name&quot;, --generate-from-json=&quot;jsonfilename&quot; and --generate-from-device=&quot;wallet_name&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>can&apos;t specify both --restore-deterministic-wallet or --restore-multisig-wallet and --non-deterministic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>--restore-multisig-wallet uses --generate-new-wallet, not --wallet-file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>--restore-deterministic-wallet uses --generate-new-wallet, not --wallet-file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>specify a recovery parameter with the --electrum-seed=&quot;multisig seed here&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>specify a recovery parameter with the --electrum-seed=&quot;words list here&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig seed failed verification</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Electrum-style word list failed verification</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No data supplied, cancelled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This address is a subaddress which cannot be used here.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse view key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify view key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>view key does not match standard address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>account creation failed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse spend key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify spend key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>spend key does not match standard address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: expected M/N, but got: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: expected N &gt; 1 and N &lt;= M, but got: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: M/N is currently unsupported. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generating master wallet from %u of %u multisig wallet keys</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse secret view key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify secret view key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: M/N is currently unsupported</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No restore height is specified.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Assumed you are creating a new account, restore will be done from current estimated blockchain height.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>account creation aborted</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>specify a wallet path with --generate-new-wallet (not --wallet-file)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>bad m_restore_height parameter: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Restore height is: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Restore height </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>can&apos;t specify --subaddress-lookahead and --wallet-file at the same time</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to open account</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is null</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to initialize ring database: privacy enhancing features will be inactive</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet failed to connect to daemon: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Daemon either is not started or wrong port was passed. Please make sure daemon is running or change the daemon address using the &apos;set_daemon&apos; command.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>List of available languages for your wallet&apos;s seed:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If your display freezes, exit blind with ^C, then run again with --use-english-language-names</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid language choice entered. Please try again.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You had been using a deprecated version of the wallet. Please use the new seed that we provide.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generated new wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>View key: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to generate new wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Your wallet has been generated!
To start synchronizing with the daemon, use the &quot;refresh&quot; command.
Use the &quot;help&quot; command to see the list of available commands.
Use &quot;help &lt;command&gt;&quot; to see a command&apos;s documentation.
Always use the &quot;exit&quot; command when closing monero-wallet-cli to save
your current session&apos;s state. Otherwise, you might need to synchronize
your wallet again (your wallet keys are NOT at risk in any case).
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generated new wallet on hw device: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to generate new mutlisig wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generated new %u/%u multisig wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet file path not valid: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Key file not found. Failed to open wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Opened watch-only wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Opened %u/%u multisig wallet%s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Opened wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to load wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use the &quot;help&quot; command to see the list of available commands.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use &quot;help &lt;command&gt;&quot; to see a command&apos;s documentation.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to deinitialize wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet data saved</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is multisig and cannot save a watch-only version</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to read wallet password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Watch only wallet saved as: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to save watch only wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>this command requires a trusted daemon. Enable with --trusted-daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mining started in daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>mining has NOT been started: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mining stopped in daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>mining has NOT been stopped: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected array length - Exited simple_wallet::set_daemon()</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Expected trusted or untrusted, got </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>trusted</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>untrusted</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This does not seem to be a valid daemon URL.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blockchain saved</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>blockchain can&apos;t be saved: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>txid </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>idx </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>spent </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Starting refresh...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New transfer received since rescan was started. Key images are incomplete.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Refresh done, blocks received: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>daemon is busy. Please try again later.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Available options:
seed language
Set the wallet&apos;s seed language.
always-confirm-transfers &lt;1|0&gt;
Whether to confirm unsplit txes.
print-ring-members &lt;1|0&gt;
Whether to print detailed information about ring members during confirmation.
store-tx-info &lt;1|0&gt;
Whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference.
default-ring-size &lt;n&gt;
Set the default ring size (obsolete).
auto-refresh &lt;1|0&gt;
Whether to automatically synchronize new blocks from the daemon.
refresh-type &lt;full|optimize-coinbase|no-coinbase|default&gt;
Set the wallet&apos;s refresh behaviour.
priority [0|1|2|3|4]
Set the fee to default/unimportant/normal/elevated/priority.
confirm-missing-payment-id &lt;1|0&gt; (obsolete)
ask-password &lt;0|1|2 (or never|action|decrypt)&gt;
action: ask the password before many actions such as transfer, etc
decrypt: same as action, but keeps the spend key encrypted in memory when not needed
unit &lt;monero|millinero|micronero|nanonero|piconero&gt;
Set the default monero (sub-)unit.
min-outputs-count [n]
Try to keep at least that many outputs of value at least min-outputs-value.
min-outputs-value [n]
Try to keep at least min-outputs-count outputs of at least that value.
merge-destinations &lt;1|0&gt;
Whether to merge multiple payments to the same destination address.
confirm-backlog &lt;1|0&gt;
Whether to warn if there is transaction backlog.
confirm-backlog-threshold [n]
Set a threshold for confirm-backlog to only warn if the transaction backlog is greater than n blocks.
confirm-export-overwrite &lt;1|0&gt;
Whether to warn if the file to be exported already exists.
refresh-from-block-height [n]
Set the height before which to ignore blocks.
auto-low-priority &lt;1|0&gt;
Whether to automatically use the low priority fee level when it&apos;s safe to do so.
segregate-pre-fork-outputs &lt;1|0&gt;
Set this if you intend to spend outputs on both Monero AND a key reusing fork.
key-reuse-mitigation2 &lt;1|0&gt;
Set this if you are not sure whether you will spend on a key reusing Monero fork later.
subaddress-lookahead &lt;major&gt;:&lt;minor&gt;
Set the lookahead sizes for the subaddress hash table.
segregation-height &lt;n&gt;
Set to the height of a key reusing fork you want to use, 0 to use default.
ignore-fractional-outputs &lt;1|0&gt;
Whether to ignore fractional outputs that result in net loss when spending due to fee.
ignore-outputs-above &lt;amount&gt;
Ignore outputs of amount above this threshold when spending. Value 0 is translated to the maximum value (18 million) which disables this filter.
ignore-outputs-below &lt;amount&gt;
Ignore outputs of amount below this threshold when spending.
track-uses &lt;1|0&gt;
Whether to keep track of owned outputs uses.
setup-background-mining &lt;1|0&gt;
Whether to enable background mining. Set this to support the network and to get a chance to receive new monero.
device-name &lt;device_name[:device_spec]&gt;
Device name for hardware wallet.
export-format &lt;&quot;binary&quot;|&quot;ascii&quot;&gt;
Save all exported files as binary (cannot be copied and pasted) or ascii (can be).
persistent-client-id &lt;1|0&gt;
Whether to keep using the same client id for RPC payment over wallet restarts.
auto-mine-for-rpc-payment-threshold &lt;float&gt;
Whether to automatically start mining for RPC payment if the daemon requires it.
credits-target &lt;unsigned int&gt;
The RPC payment credits balance to target (0 for default).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RPC client secret key should be 32 byte in hex format</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>With background mining enabled, the daemon will mine when idle and not on battery.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error checking daemon RPC access prices</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error checking daemon RPC access prices: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to connect to daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Daemon RPC credits/hash is less than was claimed. Either this daemon is cheating, or it changed its setup recently.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Claimed: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Actual: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no connection to daemon. Please make sure daemon is running.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>payment required.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RPC error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>refresh error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>internal error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>refresh failed: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Blocks received: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source> (Some owned outputs have partial key images - import_multisig_info needed)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> (Some owned outputs have missing key images - import_key_images needed)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Currently selected account: [</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>] </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>(No tag assigned)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tag: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Balance: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unlocked balance: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Balance per address:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Balance</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unlocked balance</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Outputs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%8u %6s %21s %21s %7u %21s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>pubkey</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>key image</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>spent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unlocked</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ringct</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>global index</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>tx id</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>addr index</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Used at heights: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>T</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>F</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>locked</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>[frozen]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RingCT</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>-</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No incoming transfers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No incoming available transfers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No incoming unavailable transfers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>payment</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unlock time</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No payments with id </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>payment ID has invalid format, expected 16 or 64 character hex string: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to get blockchain height: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to get spent status</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Transaction %llu/%llu: txid=%s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to find construction data for tx input</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to get output: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>output key&apos;s originating block height shouldn&apos;t be higher than the blockchain height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Originating block heights: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
|</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>|
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Warning: Some input keys being spent are from </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>the same transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>blocks that are temporally very close</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>, which can break the anonymity of ring signature. Make sure this is intentional!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ring size must not be 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ring size %u is too small, minimum is %u</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ring size %u is too large, maximum is %u</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wrong number of arguments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>payment id failed to encode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Locked blocks too high, max 1000000 (˜4 yrs)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse short payment ID from URI</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid last argument: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>a single transaction cannot use more than one payment id</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse payment id, though it was detected</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is this okay anyway?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There is currently a %u block backlog at that fee level. Is this okay?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sweeping %s in %llu transactions for a total fee of %s. Is this okay?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sweeping %s for a total fee of %s. Is this okay?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Discarding %s of unmixable outputs that cannot be spent, which can be undone by &quot;rescan_spent&quot;. Is this okay?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse number of outputs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Amount of outputs should be greater than 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>payment id has invalid format, expected 16 or 64 character hex string: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>bad locked_blocks parameter:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>a single transaction cannot use more than one payment id: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to set up payment id, though it was decoded correctly</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send this multisig info to all other participants, then use exchange_multisig_keys &lt;info1&gt; [&lt;info2&gt;...] with others&apos; multisig info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig wallet has been successfully created. Current wallet type: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to perform multisig keys exchange: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to load multisig transaction from MMS</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to mark output spent: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to mark output unspent: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spent: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Not spent: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to check whether output is spent: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Please confirm the transaction on the device</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Device name not specified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Device reconnect failed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Device reconnect failed: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show the incoming/outgoing transfers within an optional height range.
Output format:
In or Coinbase: Block Number, &quot;block&quot;|&quot;in&quot;, Time, Amount, Transaction Hash, Payment ID, Subaddress Index, &quot;-&quot;, Note
Out: Block Number, &quot;out&quot;, Time, Amount*, Transaction Hash, Payment ID, Fee, Destinations, Input addresses**, &quot;-&quot;, Note
Pool: &quot;pool&quot;, &quot;in&quot;, Time, Amount, Transaction Hash, Payment Id, Subaddress Index, &quot;-&quot;, Note, Double Spend Note
Pending or Failed: &quot;failed&quot;|&quot;pending&quot;, &quot;out&quot;, Time, Amount*, Transaction Hash, Payment ID, Fee, Input addresses**, &quot;-&quot;, Note
* Excluding change and fee.
** Set of address indices used as inputs in this transfer.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>export_transfers [in|out|all|pending|failed|coinbase] [index=&lt;N1&gt;[,&lt;N2&gt;,...]] [&lt;min_height&gt; [&lt;max_height&gt;]] [output=&lt;filepath&gt;]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export to CSV the incoming/outgoing transfers within an optional height range.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rescan the blockchain from scratch. If &quot;hard&quot; is specified, you will lose any information which can not be recovered from the blockchain itself.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export a signed set of key images to a &lt;filename&gt;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Synchronizes key images with the hw wallet.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate a new random full size payment id (obsolete). These will be unencrypted on the blockchain, see integrated_address for encrypted short payment ids.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Performs extra multisig keys exchange rounds. Needed for arbitrary M/N multisig wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Interface with the MMS (Multisig Messaging System)
&lt;subcommand&gt; is one of:
init, info, signer, list, next, sync, transfer, delete, send, receive, export, note, show, set, help
send_signer_config, start_auto_config, stop_auto_config, auto_config
Get help about a subcommand with: help mms &lt;subcommand&gt;, or mms help &lt;subcommand&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Initialize and configure the MMS for M/N = number of required signers/number of authorized signers multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display current MMS configuration</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set or modify authorized signer info (single-word label, transport address, Monero address), or list all signers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>List all messages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Evaluate the next possible multisig-related action(s) according to wallet state, and execute or offer for choice
By using &apos;sync&apos; processing of waiting messages with multisig sync info can be forced regardless of wallet state</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Force generation of multisig sync info regardless of wallet state, to recover from special situations like &quot;stale data&quot; errors</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Initiate transfer with MMS support; arguments identical to normal &apos;transfer&apos; command arguments, for info see there</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete a single message by giving its id, or delete all messages by using &apos;all&apos;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send a single message by giving its id, or send all waiting messages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Check right away for new messages to receive</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Write the content of a message to a file &quot;mms_message_content&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send a one-line message to an authorized signer, identified by its label, or show any waiting unread notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show detailed info about a single message</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Available options:
auto-send &lt;1|0&gt;
Whether to automatically send newly generated messages right away.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send completed signer config to all other authorized signers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start auto-config at the auto-config manager&apos;s wallet by issuing auto-config tokens and optionally set others&apos; labels</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete any auto-config tokens and abort a auto-config process</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Start auto-config by using the token received from the auto-config manager</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mark output(s) as spent so they never get selected as fake outputs in a ring</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Marks an output as unspent so it may get selected as a fake output in a ring</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Checks whether an output is marked as spent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;device_name[:device_spec]&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wrong number range, use: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>NOTE: the following %s can be used to recover access to your wallet. Write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>string</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>25 words</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Secret spend key (%u of %u)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use --restore-height or --restore-date if you want to restore an already setup account from a specific height.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is this okay?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Still apply restore height?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter the number corresponding to the language of your choice</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Device requires attention</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter device PIN</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to read device PIN</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Please enter the device passphrase on the device</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter device passphrase</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to read device passphrase</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The first refresh has finished for the HW-based wallet with received money. hw_key_images_sync is needed. </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do you want to do it now? (Y/Yes/N/No): </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unknown command &apos;%s&apos;, try &apos;help&apos;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Inactivity lock timeout disabled on Windows</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid number of seconds</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export format not specified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export format not recognized.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display the restore height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lock the wallet console, requiring the wallet password to continue</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unsigned integer (seconds, 0 to disable)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&quot;binary&quot; or &quot;ascii&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Warning: using an untrusted daemon at %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Using a third party daemon can be detrimental to your security and privacy</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Using your own without SSL exposes your RPC traffic to monitoring</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You are strongly encouraged to connect to the Monero network using your own daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If you or someone you trust are operating this daemon, you can use --trusted-daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Moreover, a daemon is also less secure when running in bootstrap mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>If you are new to Monero, type &quot;welcome&quot; for a brief overview.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to query mining status: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to setup background mining: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Background mining enabled. Thank you for supporting the Monero network.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Background mining not enabled. Run &quot;set setup-background-mining 1&quot; to change.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Using an untrusted daemon, skipping background mining check</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The daemon is not set up to background mine.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enabling this supports the network you are using, and makes you eligible for receiving new monero</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Background mining not enabled. Set setup-background-mining to 1 to change.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>NOTE: This transaction is locked, see details with: show_transfer </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>hw_key_images_sync skipped. Run command manually before a transfer.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid keyword: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Input %llu/%llu (%s): amount=%s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transaction spends more than one very old output. Privacy would be better if they were sent separately.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spend them now anyway?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>I locked your Monero wallet to protect you while you were away</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Locked due to inactivity. The wallet password is required to unlock the console.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>amount is wrong: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>expected number from 0 to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>transaction cancelled.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No outputs found, or daemon is not ready</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unlike Bitcoin, your Monero transactions and balance stay private and are not visible to the world by default.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>However, you have the option of making those available to select parties if you choose to.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Welcome to Monero and financial privacy. For more information see https://GetMonero.org</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>NOTE: this transaction uses an encrypted payment ID: consider using subaddresses instead</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: this transaction uses an unencrypted payment ID: these are obsolete and ignored. Use subaddresses instead.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to check for backlog: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Transaction </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: Outputs of multiple addresses are being used together, which might potentially compromise your privacy.
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>.
This transaction (including %s change) will unlock on block %llu, in approximately %s days (assuming 2 minutes per block)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unsigned transaction(s) successfully written to MMS</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to write transaction(s) to file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unsigned transaction(s) successfully written to file: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to cold sign transaction with HW wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No unmixable outputs found</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sweeping </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse donation address: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Donating %s %s to %s.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Loaded %lu transactions, for %s, fee %s, %s, %s, with min ring size %lu, %s. %sIs this okay?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>usage: export_transfers [in|out|all|pending|failed|coinbase] [index=&lt;N1&gt;[,&lt;N2&gt;,...]] [&lt;min_height&gt; [&lt;max_height&gt;]] [output=&lt;path&gt;]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>direction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>timestamp</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>running balance</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>hash</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>payment ID</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>fee</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>destination</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>index</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>note</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>CSV exported to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rescan anyway?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Warning: your restore height is higher than wallet restore height: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rescan anyway ? (Y/Yes/N/No): </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>MMS received new message</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>locked due to inactivity</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;index&gt; is out of bounds</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Network type: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Testnet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stagenet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mainnet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> (Y/Yes/N/No): </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choose processing:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sign tx</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send the tx for submission to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send the tx for signing to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Submit tx</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Choice: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wrong choice</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Id</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>I/O</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Authorized Signer</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Message Type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>R</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Message State</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Since</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> ago</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>#</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transport Address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Auto-Config Token</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Monero Address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;not set&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Message </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>In/out: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>State: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%s since %s, %s ago</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sent: Never</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sent: %s, %s ago</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Authorized signer: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Content size: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source> bytes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Content: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>(binary data)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send these messages now?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Queued for sending.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid message id</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>usage: mms init &lt;required_signers&gt;/&lt;authorized_signers&gt; &lt;own_label&gt; &lt;own_transport_address&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The MMS is already initialized. Re-initialize by deleting all signer info and messages?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error in the number of required signers and/or authorized signers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The MMS is not active.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid signer number </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>mms signer [&lt;number&gt; &lt;label&gt; [&lt;transport_address&gt; [&lt;monero_address&gt;]]]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid Monero address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet state does not allow changing Monero addresses anymore</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms list</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms next [sync]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No next step: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>prepare_multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>make_multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>exchange_multisig_keys</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>export_multisig_info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>import_multisig_info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>sign_multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>submit_multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send tx</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Process signer config</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Replace current signer config with the one displayed above?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Process auto config data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nothing ready to process</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms sync</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms delete (&lt;message_id&gt; | all)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete all messages?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms send [&lt;message_id&gt;]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms receive</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms export &lt;message_id&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Message content saved to: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to to save message content</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms note [&lt;label&gt; &lt;text&gt;]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No signer found with label </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms show &lt;message_id&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms set &lt;option_name&gt; [&lt;option_value&gt;]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wrong option value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Auto-send is on</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Auto-send is off</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unknown option</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms help [&lt;subcommand&gt;]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms send_signer_config</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Signer config not yet complete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms start_auto_config [&lt;label&gt; &lt;label&gt; ...]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There are signers without a label set. Complete labels before auto-config or specify them as parameters here.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Auto-config is already running. Cancel and restart?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms stop_auto_config</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Delete any auto-config tokens and stop auto-config?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage: mms auto_config &lt;auto_config_token&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid auto-config token</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Auto-config already running. Cancel and restart?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>MMS not available in this wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The MMS is not active. Activate using the &quot;mms init&quot; command</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid MMS subcommand</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error in MMS command: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is watch-only and cannot sign</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This wallet is multisig and cannot sign</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bad signature from </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Good signature from </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is watch-only and cannot export key images</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Signed key images exported to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>command only supported by HW wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>hw wallet does not support cold KI sync</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Please confirm the key image sync on the device</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Key images synchronized to height </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Running untrusted daemon, cannot determine which transaction output is spent. Use a trusted daemon with --trusted-daemon and run rescan_spent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> spent, </source>
<translation type="unfinished"></translation>
</message>
<message>
<source> unspent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to import key images</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to import key images: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to reconnect device</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to reconnect device: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Outputs exported to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Double spend seen on the network: this transaction may or may not end up being mined</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transaction ID not found</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transaction successfully saved to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>, txid </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to save transaction to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>true</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse refresh type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter optional seed offset passphrase, empty to see raw seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter seed offset passphrase, empty if none</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>You may want to remove the file &quot;%s&quot; and try again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Donating %s %s to The Monero Project (donate.getmonero.org or %s).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This is a multisig wallet, it can only sign with sign_multisig</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This is a watch only wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to sign transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to sign transaction: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transaction raw hex data exported to </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to load transaction from file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tx key: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no tx keys found for this txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse tx_key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tx key successfully stored.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to store tx key: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>signature file saved to: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to save signature file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse tx key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>received</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>in txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: this transaction is not yet included in the blockchain!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: failed to determine number of confirmations!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>received nothing in txid</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to load signature file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Good signature</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bad signature</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet is watch-only and cannot generate the proof</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The reserve proof can be generated only by a full wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Address must not be a subaddress</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>usage: show_transfers [in|out|all|pending|failed|coinbase] [index=&lt;N1&gt;[,&lt;N2&gt;,...]] [&lt;min_height&gt; [&lt;max_height&gt;]]</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>bad min_height parameter:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>bad max_height parameter:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>block</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>in</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>[Double spend seen on the network: this transaction may or may not end up being mined] </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;min_amount&gt; should be smaller than &lt;max_amount&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There is no unspent output in the specified address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Amount: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>, number of keys: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source> </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Min block height: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Max block height: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Min amount found: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Max amount found: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Total count: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Bin size: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Outputs per *: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>count
^
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> |</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> +</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>+--&gt; block height
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> ^</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>^
</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Warning: this will lose any information which can not be recovered from the blockchain.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This includes destination addresses, tx secret keys, tx notes, etc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Good signature -- total: %s, spent: %s, unspent: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First line is not an amount</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid output: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid output key, and file doesn&apos;t exist</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid output</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: from v8, ring size will be fixed and this setting will be ignored.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid argument: must be either 0/never, 1/action, or 2/encrypt/decrypt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transfer &lt;amount&gt; to &lt;address&gt;. If the parameter &quot;index=&lt;N1&gt;[,&lt;N2&gt;,...]&quot; is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. &lt;priority&gt; is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command &quot;set priority&quot;) is used. &lt;ring_size&gt; is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or &lt;address_2&gt; &lt;amount_2&gt; etcetera (before the payment ID, if it&apos;s included)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transfer &lt;amount&gt; to &lt;address&gt; and lock it for &lt;lockblocks&gt; (max. 1000000). If the parameter &quot;index=&lt;N1&gt;[,&lt;N2&gt;,...]&quot; is specified, the wallet uses outputs received by addresses of those indices. If omitted, the wallet randomly chooses address indices to be used. In any case, it tries its best not to combine outputs across multiple addresses. &lt;priority&gt; is the priority of the transaction. The higher the priority, the higher the transaction fee. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command &quot;set priority&quot;) is used. &lt;ring_size&gt; is the number of inputs to include for untraceability. Multiple payments can be made at once by adding URI_2 or &lt;address_2&gt; &lt;amount_2&gt; etcetera (before the payment ID, if it&apos;s included)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Send all unlocked balance to an address. If the parameter &quot;index&lt;N1&gt;[,&lt;N2&gt;,...]&quot; is specified, the wallet sweeps outputs received by those address indices. If omitted, the wallet randomly chooses an address index to be used. If the parameter &quot;outputs=&lt;N&gt;&quot; is specified and N &gt; 0, wallet splits the transaction into N even outputs.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Password needed (%s) - use the refresh command</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Daemon requests payment at diff %llu, with %f credits/hash%s. Run start_mining_for_rpc to start mining to pay for RPC access, or use another daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error mining to daemon: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to start mining for RPC payment</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> (no daemon)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> (out of sync)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>(Untitled account)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse index: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>specify an index between 0 and </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Grand total:
Balance: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>, unlocked balance: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Untagged accounts:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tag %s is unregistered.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Accounts with tag: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tag&apos;s description: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Account</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> %c%8u %6s %21s %21s %21s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>----------------------------------------------------------------------------------</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%15s %21s %21s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Primary address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>(used)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>(Untitled address)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;index_min&gt; is already out of bound</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;index_max&gt; exceeds the bound</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Integrated addresses can only be created for account 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Matching integrated address: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Integrated address: %s, payment ID: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Subaddress: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Standard address: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse payment ID or address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse index</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Address book is empty.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Index: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Address: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Description: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no description found</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>description found: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Filename: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Watch only</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%u/%u multisig%s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%s change to %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This transaction has %u confirmations</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>gencert</name>
<message>
<source>Filename to save the certificate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Filename to save the private key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Passphrase with which to encrypt the private key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File containing the passphrase with which to encrypt the private key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Prompt for a passphrase with which to encrypt the private key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Argument is needed: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to read passphrase</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to create certificate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to write certificate: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to write private key: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to save certificate file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to save private key file</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>genms</name>
<message>
<source>Base filename (-1, -2, etc suffixes will be appended as needed)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Give threshold and participants at once as M/N</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>How many participants will share parts of the multisig wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>How many signers are required to sign a valid transaction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create testnet multisig wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create stagenet multisig wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create an address file for new wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generating %u %u/%u multisig wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to verify multisig info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error verifying multisig extra info</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generated multisig wallets for address </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating multisig wallets: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This program generates a set of multisig wallets - use this simpler scheme only if all the participants trust each other</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: Can&apos;t specify more than one of --testnet and --stagenet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: expected N/M, but got: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: either --scheme or both of --threshold and --participants may be given</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: expected N &gt; 1 and N &lt;= M, but got N==%u and M==%d</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: --filename-base is required</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>mms::message_store</name>
<message>
<source>Use PyBitmessage instance at URL &lt;arg&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specify &lt;arg&gt; as username:password for PyBitmessage API</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Auto-config cannot proceed because auto config data from other signers is not complete</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The signer config is not complete.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet can&apos;t go multisig because key sets from other signers are missing or not complete.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet can&apos;t start another key exchange round because key sets from other signers are missing or not complete.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Syncing not done because multisig sync data from other signers are missing or not complete.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There are waiting messages, but nothing is ready to process under normal circumstances</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Use &quot;mms next sync&quot; if you want to force processing of the waiting sync data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>
Use &quot;mms note&quot; to display the waiting notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There are no messages waiting to be processed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>key set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>additional key set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>multisig sync data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>partially signed tx</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>fully signed tx</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>note</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>signer config</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>auto-config data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown message type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>in</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>out</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown message direction</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ready to send</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>sent</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>waiting</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>processed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>cancelled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown message state</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>sw</name>
<message>
<source>Generate new wallet and save it to &lt;arg&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate new wallet from device and save it to &lt;arg&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate incoming-only wallet from view key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate deterministic wallet from spend key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate wallet from private keys</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate a master wallet from multisig wallet keys</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Language for mnemonic</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specify Electrum seed for wallet recovery/creation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Recover wallet using Electrum-style mnemonic seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>alias for --restore-deterministic-wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Recover multisig wallet using Electrum-style mnemonic seed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate non-deterministic view and spend keys</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Restore from estimated blockchain height on specified date</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to read wallet password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter a new password for the wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid argument: must be either 0/1, true/false, y/n, yes/no</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>DNSSEC validation passed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: DNSSEC validation was unsuccessful, this address may not be correct!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>For URL: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source> Monero Address = </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>you have cancelled the transfer request</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse index: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid format for subaddress lookahead; must be &lt;major&gt;:&lt;minor&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no connection to daemon. Please make sure daemon is running.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RPC error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to get random outputs to mix: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Not enough money in unlocked balance</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>not enough outputs for specified ring size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>output amount</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>found outputs to use</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Please use sweep_unmixable.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>transaction was not constructed</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reason: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>one of destinations is zero</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to find a suitable way to split transactions</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unknown transfer error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Multisig error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>internal error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>unexpected error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There was an error, which could mean the node may be trying to get you to retry creating a transaction, and zero in on which outputs you own. Or it could be a bona fide error. It may be prudent to disconnect from this node, and not try to send a transaction immediately. Alternatively, connect to another node so the original node cannot correlate information.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File %s likely stores wallet private keys! Use a different file name.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> seconds</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> minutes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> hours</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> days</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> months</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>a long time</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This is the command line monero wallet. It needs to connect to a monero
daemon to work correctly.
WARNING: Do not reuse your Monero keys on another fork, UNLESS this fork has key reuse mitigations built in. Doing so will harm your privacy.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unknown command: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allow communicating with a daemon that uses a different RPC version</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Restore from specific blockchain height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The newly created transaction will not be relayed to the monero network</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create an address file for new wallets</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Display English language names</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>daemon is busy. Please try again later.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>possibly lost connection to daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Is this OK?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>transaction %s was rejected by daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File %s already exists. Are you sure to overwrite it?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to initialize wallet</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>tools::wallet2</name>
<message>
<source>Use daemon instance at &lt;host&gt;:&lt;port&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use daemon instance at host &lt;arg&gt; instead of localhost</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet password file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use daemon instance at port &lt;arg&gt; instead of 18081</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>For testnet. Daemon must also be launched with --testnet flag</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>can&apos;t specify daemon host or port more than once</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>can&apos;t specify more than one of --password and --password-file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>the password file specified could not be read</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to load file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet password (escape/quote as needed)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>[&lt;ip&gt;:]&lt;port&gt; socks proxy to use for daemon connections</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable commands which rely on a trusted daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Disable commands which rely on a trusted daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specify username[:password] for daemon RPC client</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enable SSL on daemon RPC connections: enabled|disabled|autodetect</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>List of valid fingerprints of allowed RPC servers</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allow any SSL certificate from the daemon</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Allow user (via --daemon-ssl-ca-certificates) chain certificates</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>For stagenet. Daemon must also be launched with --stagenet flag</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set shared ring database path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Number of rounds for the key derivation function</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>HW device to use</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>HW device wallet derivation path (e.g., SLIP-10)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do not use DNS</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do not connect to a daemon, nor use DNS</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File containing extra entropy to initialize the PRNG (any data, aim for 256 bits of entropy to be useful, wihch typically means more than 256 bits of data)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid argument for </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enabling --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> requires --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> or --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> or use of a .onion/.i2p domain</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>--trusted-daemon and --untrusted-daemon are both seen, assuming untrusted</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Daemon is local, assuming trusted</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>no password specified; use --prompt-for-password to prompt for a password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter a new password for the wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet password</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to parse JSON</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Version %u too new, we can only grok up to %u</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse view key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify view key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse spend key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to verify spend key secret key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Electrum-style word list failed verification</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>At least one of either an Electrum-style word list, private view key, or private spend key must be specified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Both Electrum-style word list and private key(s) specified</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>invalid address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>view key does not match standard address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>spend key does not match standard address</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot generate deprecated wallets from JSON</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to parse address: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Address must be specified in order to create watch-only wallet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to generate new wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Password is needed to compute key image for incoming monero</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid password: password is needed to compute key image for incoming monero</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Primary account</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No funds received in this tx.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>failed to read file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set subaddress lookahead sizes to &lt;major&gt;:&lt;minor&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path to a PEM format private key</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path to a PEM format certificate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path to file containing concatenated PEM format certificate(s) to replace system CA(s).</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>tools::wallet_rpc_server</name>
<message>
<source>Failed to create directory </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to create directory %s: %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot specify --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source> and --</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to create file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>. Check permissions or remove file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error writing to file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>RPC username/password is stored in file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tag %s is unregistered.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Transaction not possible. Available only %s, transaction amount %s = %s + %s (fee)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This is the RPC monero wallet. It needs to connect to a monero
daemon to work correctly.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t specify more than one of --testnet and --stagenet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t specify more than one of --wallet-file and --generate-from-json</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Must specify --wallet-file or --generate-from-json or --wallet-dir</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Loading wallet...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Saving wallet...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Successfully saved</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Successfully loaded</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wallet initialization failed: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to initialize wallet RPC server</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Starting wallet RPC server</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to run wallet: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stopped wallet RPC server</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Failed to save wallet: </source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>wallet_args</name>
<message>
<source>Wallet options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Generate wallet from JSON format file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use wallet &lt;arg&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set RPC client secret key for RPC payments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Max number of threads to use for a parallel job</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Specify log file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Config file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>General options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This is the command line monero wallet. It needs to connect to a monero
daemon to work correctly.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t find config file </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Logging to: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Logging to %s</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>WARNING: You may not have a high enough lockable memory limit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>see ulimit -l</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Usage:</source>
<translation type="unfinished"></translation>
</message>
</context>
</TS>
Reference in New Issue View Git Blame Copy Permalink